Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In
most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In __adpt_reset() the problem is that adpt_hba_reset() frees "pHba" on
error but we dereference it to print the name in the error message.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The scsi_host_put() function frees "pHba" and then we dereference it on
the next line when we do "scsi_host_put(pHba->host);".
[mkp: included fix from hch]
Fixes: 38e09e3bb0 ("scsi: dpt_i2o: stop using scsi_unregister")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
- one driver patch (qla2xxx) which fixes a problem caused by an
existing regression fix (FCP discovery is failing)
- one generic fix to a longstanding bug in libsas that causes I/O
eventually to hang to the device in the face of ATA error recovery.
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
scsi: libsas: defer ata device eh commands to libata
iscsi tcp will first send out data, then calculate and send data
digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be
written in spite of the on going writeback. Consequently, wrong digest
will be got and sent to target.
To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled
in iscsi_tcp .slave_configure callback.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The USB storage glue sets the try_rc_10_first flag in an attempt to
avoid wedging poorly implemented legacy USB devices.
If the device capacity is too large to be expressed in the provided
response buffer field of READ CAPACITY(10), a well-behaved device will
set the reported capacity to 0xFFFFFFFF. We will then attempt to issue a
READ CAPACITY(16) to obtain the real capacity.
Since this part of the discovery logic is not covered by the first_scan
flag, a warning will be printed a couple of times times per revalidate
attempt if we upgrade from READ CAPACITY(10) to READ CAPACITY(16).
Remember that we have successfully issued READ CAPACITY(16) so we can
take the fast path on subsequent revalidate attempts.
Reported-by: Menion <menion@gmail.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After more than 15 years all users of this legacy interface are finally
gone. Rest in peace!
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These drivers haven't seen any recent bug fixing and are two of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Convert the driver to modern style probing. Given that there only is a
single instance for a given board that can be done using a global struct
Scsi_Host instance easily.
Also fix the removal path by passing the correct cookie to free_irq, and
enable it unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
esas2r has been converted to hotplug style initialization long ago, but
kept various remant of the old-style scsi_module.c initialization
around. Remove those.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It happens often while I'm preparing a patch for a block driver that
I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT
available for this driver? Do I have to introduce definitions of these
constants before I can use these constants? To avoid this confusion,
move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the
<linux/blkdev.h> header file such that these become available for all
block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h
header file conditional to avoid that including that header file after
<linux/blkdev.h> causes the compiler to complain about a SECTOR_SIZE
redefinition.
Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have
not been removed from uapi header files nor from NAND drivers in
which these constants are used for another purpose than converting
block layer offsets and sizes into a number of sectors.
Cc: David S. Miller <davem@davemloft.net>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Following an RSCN, ibmvfc will issue an ADISC to determine if the
underlying target has changed, comparing the SCSI ID, WWPN, and WWNN to
determine how to handle the rport in discovery. However, the comparison
of the WWPN and WWNN was performing a memcmp between a big endian field
against a CPU endian field, which resulted in the wrong answer on LE
systems. This was observed as unexpected errors getting logged at boot
time as targets were getting relogins when not needed.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
32 bit port capabilities are required to support new speeds which can
not be supported using 16 bit port capabilities.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enabling -Wvla, remove VLAs and replace them with
fixed-length arrays instead.
bfad_bsg.c uses a variable-length array declaration to measure the
size of a putative array; this can be replaced by the product of the
size of an element and the number of elements, avoiding the VLA
altogether.
This was prompted by https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enabling -Wvla, remove VLAs and replace them with
fixed-length arrays instead.
The arrays fixed here, using the number of constant sections, aren't
really VLAs, but they appear so to the compiler. Replace the array sizes
with a pre-processor-level constant instead using ARRAY_SIZE.
This was prompted by https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the comment for function alua_alloc_pg() the argument '@h' is
mistakenly referred to. Fix this by replacing it with the correct
argument reference, '@tpgs', and provide a short description.
Signed-off-by: John Pittman <jpittman@redhat.com>
Reviewed-by Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
aha1740 doesn't use scsi_register, so it should not use scsi_unregister
either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since moving away from using scsi_module.c these were never called. The
implementations are called directly, though so they remain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
dpt_i2o doesn't use scsi_register, so it should not use scsi_unregister
either. Also refactor the module exit path to make a little more sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These two drivers do not appear to be in active use. Deprecate them.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are several unions that are local to the source and do not need to
be in global scope, so make them static. Also add in a missing void
parameter to functions lpfc_nvme_cmd_template and
lpfc_nvmet_cmd_template to clean up non-ANSI warning.
Cleans up sparse warnings:
drivers/scsi/lpfc/lpfc_nvme.c:68:19: warning: symbol
'lpfc_iread_cmd_template' was not declared. Should it be static?
drivers/scsi/lpfc/lpfc_nvme.c:69:19: warning: symbol
'lpfc_iwrite_cmd_template' was not declared. Should it be static?
drivers/scsi/lpfc/lpfc_nvme.c:70:19: warning: symbol
'lpfc_icmnd_cmd_template' was not declared. Should it be static?
drivers/scsi/lpfc/lpfc_nvme.c:74:24: warning: non-ANSI function
'lpfc_tsend_cmd_template' was not declared. Should it be static?
drivers/scsi/lpfc/lpfc_nvmet.c:78:19: warning: symbol
'lpfc_treceive_cmd_template' was not declared. Should it be static?
drivers/scsi/lpfc/lpfc_nvmet.c:79:19: warning: symbol
'lpfc_trsp_cmd_template' was not declared. Should it be static?
drivers/scsi/lpfc/lpfc_nvmet.c:83:25: warning: non-ANSI function
declaration of function 'lpfc_nvmet_cmd_template'
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"This is four patches, consisting of one regression from the merge
window (qla2xxx), one long-standing memory leak (sd_zbc), one event
queue mislabelling which we want to eliminate to discourage the
pattern (mpt3sas), and one behaviour change because re-reading the
partition table shouldn't clear the ro flag"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep disk read-only when re-reading partition
scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure
scsi: sd_zbc: Fix potential memory leak
scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
The current BSG design tries to shoe-horn the transport-specific
passthrough commands into the overall framework for SCSI passthrough
requests. This has a couple problems:
- each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag
despite not dealing with SCSI commands at all. Because of that these
queues could also incorrectly accept SCSI commands from in-kernel
users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl.
- the real SCSI bsg queues also incorrectly accept bsg requests of the
BSG_SUB_PROTOCOL_SCSI_TRANSPORT type
- the bsg transport code is almost unredable because it tries to reuse
different SCSI concepts for its own purpose.
This patch instead adds a new bsg_ops structure to handle the two cases
differently, and thus solves all of the above problems. Another side
effect is that the bsg-lib queues also don't need to embedd a
struct scsi_request anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to enabling -Wvla, remove VLAs and replace them with
fixed-length arrays instead.
scsi_dh_{alua,emc,rdac} use variable-length array declarations to store
command blocks, with the appropriate size as determined by
COMMAND_SIZE. This patch replaces these with fixed-sized arrays using
MAX_COMMAND_SIZE, so that the array size can be determined at compile
time.
This was prompted by https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In jazz_esp and sun3x_esp, the esp_driver_ops methods pass esp->dev in
dma api calls as if it was a pointer to a struct device. But it actually
points to a struct platform_device. Fix this.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export device table of v3 hw to userspace, or auto probe will fail for v3
hw.
Also change the module alias to include "pci", instead of "platform".
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do some modifications for register configuring for hip08.
In future, to reduce kernel churn with patches to modify registers, any
registers which may change between board models (mostly PHY/SERDES related)
should be set in ACPI reset handler.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The patch does some code cleanup and fixes some small bugs:
- Correct return status of phy_up_v3_hw() and phy_bcast_v3_hw()
- Add static for function phy_get_max_linkrate_v3_hw()
- Change exception return status when no reset method
- Change magic value to ts->stat in slot_complete_vx_hw()
- Remove unnecessary check for dev_is_sata()
- Fix some issues of alignment and indents (Authored by Xiaofei Tan in
another patch, but added here to be practical)
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is an implicit regulation that error code that function returned should
be negative. But hisi_sas_task_prep() doesn't follow this. This may cause
problems in the upper layer code.
For example, in sas_expander.c of libsas, smp_execute_task_sg() may return
the number of bytes of underrun. It will be conflicted with the scenaio
lldd_execute_task() return an positive error code.
This patch change the return value from SAS_PHY_DOWN to -ECOMM in
hisi_sas_task_prep().
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The structure element hisi_sas_devices.running_req to count how many
commands are active is in effect only ever written in the code, so remove
it.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current 110ms expiry time is not long enough for the internal abort
task.
The reason is that the internal abort task could be blocked in HW if the HW
is retrying to set up link. The internal abort task will be executed only
when the retry process finished.
The maximum time is 5s for the retry of setting up link. So, the timer
expire should be more than 5s. This patch increases it from 110ms to 6s.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is not right to set the register PROG_PHY_LINK_RATE while PHY is still
enabled. So if we want to change PHY linkrate, we need to disable PHY before
setting the register PROG_PHY_LINK_RATE, and then start-up PHY. This patch
is to fix this issue.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In sysfs, there are two files about minimum linkrate, and also two files for
maximum linkrate. Take maximum linkrate example, maximum_linkrate_hw is
read-only and indicated by the register HARD_PHY_LINKRATE, and
maximum_linkrate is read-write and corresponding to the register
PROG_PHY_LINK_RATE.
But in the function phy_up_v*_hw(), we get *_linkrate value from
HARD_PHY_LINKRATE. It is not right. This patch is to fix this issue.
Unreferenced PHY-interrupt enum is also removed for v3 hw.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The register SAS_PHY_CTRL is configured according to signal quality. The
signal quality is calculated by signal attenuation of hardware physical
link. It may be different for different PCB layout.
So, in order to give better support to new board, this patch add support to
reading the devicetree property, "hisilicon,signal-attenuation". Of course,
we still keep an default value in driver to adapt old board.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI PRE-FETCH (10 or 16) command is present both on hard disks
and some SSDs. It is useful when the address of the next block(s) to
be read is known but it is not following the LBA of the current READ
(so read-ahead won't help). It returns two "good" SCSI Status values.
If the requested blocks have fitted (or will most likely fit (when
the IMMED bit is set)) into the disk's cache, it returns CONDITION
MET. If it didn't (or will not) fit then it returns GOOD status.
The goal of this patch is to stop the SCSI subsystem treating the
CONDITION MET SCSI status as an error. The current state makes the
PRE-FETCH command effectively unusable via pass-throughs.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver fails to allocate command buffers in the routine
lpfc_new_scsi_buf_s4
There is an inconsistency between lpfc_mem_alloc(), where the
phba->lpfc_sg_dma_buf_pool is created, and lpfc_new_scsi_buf_s4(),
when we allocate a buffer from the pool and check the alignment. The
alignment should be on a page boundary, based on LPFC_SLI3_BG_ENABLED in
sli3_options, for both cases.
Fix by explicitly tracking sli4 vs sli3 and BG options. The result is that
phba->cfg_sg_dma_buf_size is now set correctly for SLI-4.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
POST_SGL_PAGES mailbox command failed with status (timeout).
wait_event_interruptible_timeout when called from mailbox wait interface,
gets interrupted, and will randomly fail. Behavior seems very specific to 1
particular server type.
Fix by changing from wait_event_interruptible_timeout to
wait_for_completion_timeout.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
