If we don't find a matching device node, we must free the memory allocated
in 'omap_dmm' a few lines above.
Fixes: 7cb0d6c17b ("drm/omap: fix TILER on OMAP5")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The panel_bridge bridge attaches to the panel's OF node, not the
lvds-encoder's node. Put in a little no-op bridge of our own so that
our consumers can still find a bridge where they expect.
This also fixes an unintended unregistration and leak of the
panel-bridge on module remove.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 13dfc0540a ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri
dge.")
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
Support the "cec" optional clock. The documentation already mentions "cec"
optional clock and it is used by several boards, but currently the driver
doesn't enable it, thus preventing cec from working on those boards.
And even worse: a /dev/cecX device will appear for those boards, but it
won't be functioning without configuring this clock.
Changes:
v4:
- Change commit message to stress the importance of this patch
v3:
- Drop useless braces
v2:
- Separate ENOENT errors from others
- Propagate other errors (especially -EPROBE_DEFER)
Signed-off-by: Pierre-Hugues Husson <phh@phh.me>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me
This patch makes v9.39 firmware as default firmware for KBL.
Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.
This update includes (since v9.14):
- DCC spec changes for BXT + DCT enabling
- Bug Fix for power conservation feature SLPC_DCC
- Scheduler 1-element submission during DCC cycles.
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in
Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- GuC Msg Channel Hang WA - Stall GUC for mmio access when IDI is low
during CPD flow.
- Fix for submit queue over flow issue
- Enabling IBC on KBL GT3 15W, GT4 45W
- Disabling wrong device ID WA in production signed kernel
- Enabling WA for MSGCH hang issue upto required KBL stepping
- Clear forcewake in CSB when SQ is empty.
- 3Tries of GuC2CSME wake request
- During reset one parameter was not getting accounted
- Disable DCC 1-elem mode submission
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this
check in.
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling Dynamic Render Power Well Hysteresis Programming for Compute
Worklaods
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control
Bit
- Aggressive DCC implementation for supported platforms.
v2: Rebase. Updated commit message.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Anusha Srivatsa<anusha.srivatsa@intel.com >
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-4-git-send-email-sagar.a.kamble@intel.com
This patch makes v9.29 firmware as default firmware for BXT.
Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.
This update includes (since v8.7):
- Added support to log media reset count for host to read it
- BXT WA for fixing MTP hangs. WaDisableDOPRenderClkGatingAtSubmit
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into
1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- Springboard based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Enabled IBC for BXT
- Media engine Reset fix. Correctly marking context for resubmission in
Media Reset case.
- SLPC Dynamic RPe fix to resolve issues where incorrect frequency was set.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Clear forcewake in CSB when SQ is empty.
- SLPC IBC 1.6 for APL to ensure multiplier does not cap IA below Pe.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change. No functional change done as part of this
check in.
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Fixing Issue with Default Guc Log changes for OCA using special Control
Bit
v2: Rebase. Updated commit message.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-3-git-send-email-sagar.a.kamble@intel.com
This patch makes v9.33 firmware as default firmware for SKL.
Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.
This update includes (since v6.1):
- HuC RSA Keys updated.
- Adding per engine preemption support in GuC scheduler
- Minor bug fixes.
- Added support to log media reset count for host to read it
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into
1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in
Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- DCC consistency fix for SKL
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Enabled WA for MSGCH hang issue
- Clear forcewake in CSB when SQ is empty.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this
check in.
- Enable decoupled freq for SKL GT4
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control
Bit
v2: Rebase. Updated commit message.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-2-git-send-email-sagar.a.kamble@intel.com
VMIDs 8-16 in Kaveri were reserved for use by the amdkfd driver.
Because we removed amdkfd support from radeon, those VMIDs are now
used by radeon and are initialized by radeon.
This patch removes the function that initialized those VMIDs for amdkfd
use.
This initialization overridden the radeon initialization and caused GPU
faults and GUI crashed.
Fixes: f4fa88ab28 ("drm/radeon: deprecate and remove KFD interface")
Rported-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts "drm/ttm: Fix configuration error around populate_and_map()
functions".
This fix has gone into the wrong direction. Those helpers should be
available even when neither CONFIG_INTEL_IOMMU nor CONFIG_SWIOTLB are
set.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_atomic_helper_setup_commit expects that flipping of previous commits
has happened when it is called to set up a new commit. This can be violated
by commits where userspace doesn't get a flip completion event to
synchronize against i.e. legacy modesets and property changes.
The expectation is that those are done by blocking commits, which wait for
completion. Most drivers call drm_atomic_helper_wait_for_vblanks in the
commit_tail to ensure completion, but the wait for next vblank might not
actually happen if the commit didn't change any planes.
Make the wait more agressive by also waiting if no planes changed. This
is the minimal regression fix for the 4.15 kernel series. Long term
drivers should switch away from drm_atomic_helper_wait_for_vblanks and
use drm_atomic_helper_wait_for_flip_done instead.
Fixes: de39bec1a0 ("drm/atomic: Remove waits in drm_atomic_helper_commit_cleanup_done, v2.")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129110431.6300-1-l.stach@pengutronix.de
Sagar noticed the check can be consolidated between the engine stats
implementation and the PMU.
My first choice was a static inline helper but that got into include
ordering mess quickly fast so I went with a macro instead. At some point
we should perhaps looking into taking out the non-ringubffer bits from
intel_ringbuffer.h into a new intel_engine.h or something.
v2: Use engine->flags. (Chris Wilson)
v3: Rebase and mark GuC as not yet supported. (Chris Wilson)
v4: Move flag setting to intel_engines_reset_default_submission.
(Chris Wilson)
v5: Move flag setting to logical_ring_setup.
v6: intel_engines_reset_default_submission is the wrong place to set the
flag - it needs to be in execlists_set_default_submission. (Sagar)
v7: Flag setting in logical_ring_setup is not required. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v6)
Link: https://patchwork.freedesktop.org/patch/msgid/20171129102805.22690-1-tvrtko.ursulin@linux.intel.com
reading dpcd 0x600 cause link loss for a particular USB-C dock with
thurderbolt. workaround by avoiding dcpd 0x600 read unless it's
necessary.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new helper function is advised to be used for drviers that
use the nonblocking commit tracking support instead of
drm_atomic_helper_wait_for_vblanks.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding gamma changed check as condition for affected plane.
We ignored adding plane as affected if modeset was not required.
But for color management change we still need it.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1001
acquire_free_pipe_for_stream() error: we previously assumed 'head_pipe'
could be null (see line 998)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1808
dc_validate_global_state() error: we previously assumed 'new_ctx' could
be null (see line 1778)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:148 create_links()
error: potential null dereference 'link->link_enc'. (kzalloc returns
null)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:298
dc_stream_set_cursor_position() error: we previously assumed 'hubp'
could be null (see line 294)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1124
dce110_timing_generator_validate_timing() warn: variable dereferenced
before check 'timing' (see line 1116)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/log_helpers.c:79
dc_conn_log() error: buffer overflow 'signal_type_info_tbl' 10 <= 10
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:266
bios_parser_get_dst_obj() error: uninitialized symbol 'id'.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_audio.c:357
dce_aud_az_enable() warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_resource.c:958
dcn10_acquire_idle_pipe_for_layer() error: we previously assumed
'head_pipe' could be null (see line 952)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2760
create_eml_sink() warn: variable dereferenced before check
'aconnector->base.edid_blob_ptr' (see line 2758)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:4270
amdgpu_dm_atomic_commit_tail() warn: variable dereferenced before check
'dm_new_crtc_state->stream' (see line 4266)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:4417
dm_restore_drm_connector_state() warn: variable dereferenced before
check 'disconnected_acrtc' (see line 4415)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
in eDP+ HDMI/DP clone or extended configuration, audio inst changed from inst 1 to inst0.
No failure related this though, just playback device endpoint inst changed.
Also remove one addition register read.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently in the case where some of the allocations fail for dce110_tgv,
dce110_xfmv, dce110_miv or dce110_oppv then the exit return path ends
up leaking allocated objects. Fix this by kfree'ing them before returning.
Also re-work the comparison of the null pointers to use the !ptr idiom.
Detected by CoverityScan, CID#1460246, 1460325, 1460324, 1460392
("Resource Leak")
Fixes: c4562236b3bc ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While validation fbc, array_mode of the pipe is accessed
without checking plane_state exists for it.
Causing to null pointer dereferencing followed by
reboot when a crtc associated with external display(not
connected) is page flipped.
This patch adds a check for plane_state before using
it to validate fbc.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Within atomic check, dm_update_crtcs_state is called twice. First to
remove from the dc_state, and subsequently to add to it.
In both calls, a secondary mode-change check is done using dc-level
states. We shouldn't be doing this while removing, since a new
dc_stream_state has not been created to do the necessary comparison.
Because of this, the mode_changed flag within the DRM state can be
mistakenly set to false. Doing so only when adding prevents this.
We are also guaranteed that a call to add will come after remove, or
else the atomic check fails (and a commit will not happen).
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to fix: MST display failed to resume from S3
At the beginning of resume from S3, need to check if mgr->aux is
NULL. Fake MST encoder doesn't have real aux channel.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean fake sink flag on resume if real sink connected.
Fixing S3 topology change problem like this:
1) x desktop with 1 or > displays
2) unplug display
3) suspend
4) replug same display
5) resume
without this change replugged display doesn't light up
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DP active dongles, the dpcd dongle caps are read but not
used to validate mode timing. This addresses this.
In particular, this change fixes light up on the HDMI 4k TV
connected through DP active dongle. Since the 4k TV defaults
to YCbCr420, which the dongle don't support.
This change does not address MST cases, a more generalized
approach must be taken for that.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core_link_disable_stream should be called when the new stream is null
(i.e. want to disable). Modify the if condition to reflect that.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
