1)create a routine "handle_vram_lost" to do the vram
recovery, and put it into amdgpu_device_reset/reset_sriov,
this way no need of the extra paramter to hold the
VRAM LOST information and the related macros can be removed.
3)show vram_recover failure if time out, and set TMO equal to
lockup_timeout if vram_recover is under SRIOV runtime mode.
4)report error if any ip reset failed for SR-IOV
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Rebase.
v3:
* Remove DPF, it has been removed from SKL+.
* Fix -internal rebase wrt. execlists interrupt handling.
v4: Rebase.
v5:
* Updated for POR changes. (Daniele Ceraolo Spurio)
* Merged with irq handling fixes by Daniele Ceraolo Spurio:
* Simplify the code by using gen8_cs_irq_handler.
* Fix interrupt handling for the upstream kernel.
v6:
* Remove early bringup debug messages (Tvrtko)
* Add NB about arbitrary spin wait timeout (Tvrtko)
v7 (from Paulo):
* Don't try to write RO bits to registers.
* Don't check for PCH types that don't exist. PCH interrupts are not
here yet.
v9:
* squashed in selector and shared register handling (Daniele)
* skip writing of irq if data is not valid (Daniele)
* use time_after32 (Chris)
* use I915_MAX_VCS and I915_MAX_VECS (Daniele)
* remove fake pm interrupt handling for later patch (Mika)
v10:
* Direct processing of banks. clear banks early (Chris)
* remove poll on valid bit, only clear valid bit (Mika)
* use raw accessors, better naming (Chris)
v11:
* adapt to raw_reg_[read|write]
* bring back polling the valid bit (Daniele)
v12:
* continue if unset intr_dw (Daniele)
* comment the usage of gen8_de_irq_handler bits (Daniele)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-2-mika.kuoppala@linux.intel.com
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The setup code for color space conversion is a bit messy. This patch
cleans it up.
For some reason the TRM uses values in YCrCb order, which is also used
in the current driver, whereas everywhere else it's YCbCr (which also
matches YUV order). This patch changes the tables to use the common
order to avoid confusion.
The tables are split into separate lines, and comments added for
clarity.
WB color conversion registers are similar but different than non-WB, but
the same function was used to write both. It worked fine because the
coef table was adjusted accordingly, but that was rather confusing. This
patch adds a separate function to write the WB values so that the coef
table can be written in an understandable way.
Recalculation also showed that 'bcb' value in yuv-to-rgb conversion had
been rounded wrongly, and it should be 516 instead of 517.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Allow HDMI audio setup even if we do not have video configured. Audio
will get configured at the same time with video if the video is
configured soon enough. If it is not the audio DMA will timeout in
couple of seconds and audio playback will be aborted.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We define max width and height in mode_config to 2048. These maximums
affect many things, which are independent and depend on platform. We
need to do more fine grained checks in the code paths for each
component, and so the maximum values in mode_config should just be "big
enough" to cover all use cases.
Change the maximum width & height to 8192.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add writeback specific dispc functions to dispc_ops so that omapdrm can
use them. Also move 'enum dss_writeback_channel' to the public
omapdss.h for omapdrm.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
WB has additional scaling limits when the output color format is one of
the YUV formats. These limits are not handled at the moment, causing
bad scaling and/or NULL dereference crash.
This patchs adds the check so that dispc returns an error for bad
scaling request.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When using WB capture from interlaced source, we need to halve the
picture heights correctly.
Unfortunately the current dispc_ovl_setup_common() doesn't deal with
interlace very neatly, so the end result is a bit messy.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Vertical blanking needs to be halved on interlace modes. WBDELAYCOUNT
was calculated without such halving, resulting in WBUNCOMPLETE errors.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
For HDMI, WBDELAYCOUNT starts counting at the start of vsync, not at the
start of vfp.
This patch adjusts the wbdelay for HDMI accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We need to know the WB channel-in in wb_setup() to be able to configure
WB properly for capture mode. At the moment channel-in is set
separately.
This patch moves channel-in to wb_setup().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In dispc_set_ovl_common() we need to initialize pclk to a valid
value when we use WB in capture mode (i.e. mem_2_mem is false).
Otherwise dispc_ovl_calc_scaling() fails.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When dispc_wb_setup() calls dispc_ovl_setup_common() it does not
check for failure but instead keeps on partially setting up WB.
This causes the WB H/W to be partially initialized and yield
unexpected behavior.
Make sure return code is successful before proceeding.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add HPD support to the DVI connector driver. The code is almost
identical to the HPD code in the HDMI connector driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Do not try to init the fbdev if either num_crtcs or num_connectors is 0.
In this case we do not have display so the fbdev init would fail anyways.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_fbdev_init() and omap_fbdev_free() use priv->fbdev directly.
However, omap_fbdev_init() returns the fbdev, and omap_drv.c also
assigns the return value to priv->fbdev. This is slightly confusing.
Clean this up by removing the omap_fbdev_init() return value, as we
don't care whether fbdev init succeeded or not. Also change omap_drv.c
to call omap_fbdev_free() always, and omap_fbdev_free() does the check
if fbdev was initialized.
While at it, rename omap_fbdev_free() to omap_fbdev_fini() to better
match the "init" counterpart.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If we have no crtcs/connectors, fbdev init goes fine, but
omap_fbdev_create() is never called. This means that omap_fbdev->bo is
NULL and omap_fbdev_free() crashes.
Add a check to omap_fbdev_free() to handle the NULL case.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fix sparse warning:
drivers/gpu/drm/omapdrm/omap_fbdev.c:83:9: warning: Initializer entry defined twice
drivers/gpu/drm/omapdrm/omap_fbdev.c:91:10: also defined here
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fix sparse warning:
drivers/gpu/drm/omapdrm/dss/dispc.c:387:9: warning: context imbalance in 'mgr_fld_write' - different lock contexts for basic block
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The venc private data structure is currently stored as a global
variable. While no platform with multiple VENC encoders currently exists
nor is planned, this doesn't comply with the kernel device model and
should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The sdi private data structure is currently stored as a global
variable. While no platform with multiple SDI encoders currently exists
nor is planned, this doesn't comply with the kernel device model and
should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The omap_hdmi private data structure is currently stored as a global
variable. While no platform with multiple HDMI5 encoders currently
exists nor is planned, this doesn't comply with the kernel device model
and should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The omap_hdmi private data structure is currently stored as a global
variable. While no platform with multiple HDMI4 encoders currently
exists nor is planned, this doesn't comply with the kernel device model
and should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dispc private data structure is currently stored as a global
variable. While no platform with multiple DISPC currently exists
nor is planned, this doesn't comply with the kernel device model and
should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).
In order to allow the omapdrm side to call the dispc_ops with a DISPC
pointer, we also introduce a new function dss_get_dispc() to retrieve
the DISPC corresponding to the DSS.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dss_device is the top-level component in the omapdss driver. Give
the omapdrm driver access to the dss_device pointer in order to obtain
pointers to all other components from it. This requires a new global
variable in the omapdss driver that will be removed when merging the
omapdrm and omapdss drivers, but will already allow removal of several
other global variables.
As this partly duplicates the omapdss_is_initialized() API, reimplement
it as an inline function wrapping omapdss_get_dss().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dss_mgr_ops operations implemented by the omapdrm side have to look
up the omap_crtc objects from global variables as they are only passed a
channel number. In order to remove global variables in the omapdrm
driver pass the omap_drm_private pointer to the dss_mgr_ops. This
requires storing a pointer to the omap_drm_private in a global variable
on the DSS side as a temporary measure until the omapdrm and omapdss
drivers get merged.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dss_mgr_*() functions take a channel argument to identify the
channel they operate on. This prevents the functions from accessing
driver data structures without resorting to global variables. In an
effort to remove global variables, pass the omap_dss_device pointer
associated with the channel instead. This will be used to look up the
omap_drm_private data structure to pass to the dss_mgr_ops.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_display_init_dispc() and dsi_display_uninit_dispc() functions
take a channel argument that is reduntant as it is always identical to
the dsi->output.dispc_channel. Remove the argument and use the field
directly in the functions to avoid misuse.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_data structure stores a pointer to a struct platform_device. The
driver only uses the dev member of the platform device structure. Store
the struct device pointer instead and use it directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_bind() function receives a pointer to a struct device that it
casts to a struct platform_device, only to use the platform device's dev
field through the code. Use the dev pointer directly.
While at it rename the struct platform_device pointer dsidev to pdev to
make it more explicit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_get_dsidrv_data() and dsi_get_dsidev_from_dssdev() inline
functions convert a struct omap_dss_device pointer to the corresponding
struct platform_device, and a struct platform_device pointer to the
corresponding struct dsi_data. They are nearly always called together
without any use of the intermediate platform_device, so combine them
into a single function.
In the three locations where only dsi_get_dsidrv_data() is used, call
dev_get_drvdata() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Internal dsi functions take a pointer to the DSI platform_device and
then cast it to a dsi_data pointer. That's pointless as the caller
already has the dsi_data pointer. Pass it directly instead of the
platform_device pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
