Pull kselftest fixes from Shuah Khan:
"A fix to the Kselftest framework to save and restore errno and a fix
to livepatch to push and pop dynamic debug config"
* tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: push and pop dynamic debug config
kselftest: save-and-restore errno to allow for %m formatting
Given the increasing number of BPF selftests, it makes sense to
reduce the time to execute these tests. The ping parameters are
adjusted to reduce the time from measures 9 sec to approx 2.8 sec.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric)
create two wrapper test scripts, that start the test_xdp_vlan.sh script
with these modes.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP.
This selftest was created together with a fix for generic XDP, in commit
2972495699 ("net: fix generic XDP to handle if eth header was
mangled"). And was suppose to catch if generic XDP was broken again.
The tests are using veth and assumed that veth driver didn't support
native driver XDP, thus it used the (ip link set) 'xdp' attach that fell
back to generic-XDP. But veth gained native-XDP support in 948d4f214f
("veth: Add driver XDP"), which caused this test script to use
native-XDP.
Fixes: 948d4f214f ("veth: Add driver XDP")
Fixes: 97396ff0bc ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'flow offload' expression should not offload flows that will be subject
to ipsec, but it does.
This results in a connectivity blackhole for the affected flows -- first
packets will go through (offload happens after established state is
reached), but all remaining ones bypass ipsec encryption and are thus
discarded by the peer.
This can be worked around by adding "rt ipsec exists accept"
before the 'flow offload' rule matches.
This test case will fail, support for such flows is added in
next patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull perf tooling fixes from Thomas Gleixner:
"A set of updates for perf tools and documentation:
perf header:
- Prevent a division by zero
- Deal with an uninitialized warning proper
libbpf:
- Fix the missiong __WORDSIZE definition for musl & al
UAPI headers:
- Synchronize kernel headers
Documentation:
- Fix the memory units for perf.data size"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
libbpf: fix missing __WORDSIZE definition
perf tools: Fix perf.data documentation units for memory size
perf header: Fix use of unitialized value warning
perf header: Fix divide by zero error if f_header.attr_size==0
tools headers UAPI: Sync if_link.h with the kernel
tools headers UAPI: Sync sched.h with the kernel
tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl
tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC()
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Update tools's copy of mman.h headers
tools headers UAPI: Update tools's copy of kvm.h headers
tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open
Add use case section to fcnal-test.
Initial test is VRF based with a bridge and vlans. The commands
stem from bug reports fixed by:
a173f066c7 ("netfilter: bridge: Don't sabotage nf_hook calls from an l3mdev")
cd6428988b ("netfilter: bridge: Don't sabotage nf_hook calls for an l3mdev slave")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 netfilter tests to send tcp reset or icmp unreachable for a
port. Initial tests are VRF only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add netfilter tests to send tcp reset or icmp unreachable for a port.
Initial tests are VRF only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 runtime tests where passive (no traffic flowing) and active
(with traffic) sockets are expected to be reset on device deletes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add runtime tests where passive (no traffic flowing) and active (with
traffic) sockets are expected to be reset on device deletes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 address bind tests to fcnal-test.sh. Verifies socket binding to
local addresses for raw, tcp and udp including device and VRF cases.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add address bind tests to fcnal-test.sh. Verifies socket binding to
local addresses for raw, tcp and udp including device and VRF cases.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 udp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.udp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add udp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.udp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 tcp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.tcp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tcp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.tcp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 ping tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures.
Setup includes unreachable routes and fib rules blocking traffic.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ping tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures.
Setup includes unreachable routes and fib rules blocking traffic.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initial commit for functional test suite for fib and socket lookups.
This commit contains the namespace setup, networking config, test options
and other basic infrastructure.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add nettest - a simple program with an implementation for various networking
APIs. nettest is used for tcp, udp and raw functional tests for both IPv4
and IPv6.
Point of this command versus existing utilities:
- controlled implementation of the APIs and the order in which they
are called,
- ability to verify ingress device, local and remote addresses,
- timeout for controlled test length,
- ability to discriminate a timeout from a system call failure, and
- simplicity with test scripts.
The command returns:
0 on success,
1 for any system call failure, and
2 on timeout.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On my laptop most memcg kselftests were being skipped because it claimed
cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it
seems current systemd HEAD mounts it with the name "cgroup2" instead of
"cgroup":
% grep cgroup /proc/mounts
cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0
I can't think of a reason to need to check fs_spec explicitly
since it's arbitrary, so we can just rely on fs_vfstype.
After these changes, `make TARGETS=cgroup kselftest` actually runs the
cgroup v2 tests in more cases.
Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To run the dirty_log_test on s390x, we have to make sure that we
access the dirty log bitmap with little endian byte ordering and
we have to properly align the memslot of the guest.
Also all dirty bits of a segment are set once on s390x when one
of the pages of a segment are written to for the first time, so
we have to make sure that we touch all pages during the first
iteration to keep the test in sync here.
DEFAULT_GUEST_TEST_MEM needs an adjustment, too. On some s390x
distributions, the ELF binary is linked to address 0x80000000,
so we have to avoid that our test region overlaps into this area.
0xc0000000 seems to be a good alternative that should work on x86
and aarch64, too.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-4-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The way we exit from a guest to userspace is very specific to the
architecture: On x86, we use PIO, on aarch64 we are using MMIO and on
s390x we're going to use an instruction instead. The possibility to
select a type via the ucall_type_t enum is currently also completely
unused, so the code in ucall.c currently looks more complex than
required. Let's split this up into architecture specific ucall.c
files instead, so we can get rid of the #ifdefs and the unnecessary
ucall_type_t handling.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-2-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Since commit 05f415715c ("rcu: Speed up expedited GPs when interrupting
RCU reader") in v5.0 and through v5.1, booting with the threadirqs kernel
boot parameter caused self-deadlocks, which can be reproduced using the
following command on an 8-CPU system:
tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --configs "TREE03" --bootargs "threadirqs"
This commit therefore adds the threadirqs kernel boot parameter to
the TREE03 rcutorture scenario in order to more quickly detect future
similar bugs.
Link: http://lkml.kernel.org/r/20190626135447.y24mvfuid5fifwjc@linutronix.de
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Joel Fernandes <joel@joelfernandes.org>
The kvm-test-1-run.sh script says 'test -z "last_ts"' which always
evaluates to true (AKA zero) regardless of the value of the last_ts shell
variable. This commit therefore inserts the needed dollar sign ("$").
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Ignore SOL_TCP:TCP_CONGESTION in getsockopt and always override
SOL_TCP:TCP_CONGESTION with "cubic" in setsockopt hook.
Call setsockopt(SOL_TCP, TCP_CONGESTION) with short optval ("nv")
to make sure BPF program has enough buffer space to replace it
with "cubic".
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add 2 tests that check JIT code generation to jumps to 1st insn.
1st test is similar to syzbot reproducer.
The backwards branch is never taken at runtime.
2nd test has branch to 1st insn that executes.
The test is written as two bpf functions, since it's not possible
to construct valid single bpf program that jumps to 1st insn.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
introduced backwards-compatibility issue, manifesting itself as -E2BIG
error returned on program load due to unknown non-zero btf_fd attribute
value for BPF_PROG_LOAD sys_bpf() sub-command.
This patch fixes bug by ensuring that we only ever associate BTF FD with
program if there is a BTF.ext data that was successfully loaded into
kernel, which automatically means kernel supports func_info/line_info
and associated BTF FD for progs (checked and ensured also by BTF
sanitization code).
Fixes: 5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit simplifies life a bit by making all of the scripts in
tools/memory-model/scripts be executable.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Michael reported an issue with perf bench numa failing with binding to
cpu0 with '-0' option.
# perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd
# Running 'numa/mem' benchmark:
# Running main, "perf bench numa numa-mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd"
binding to node 0, mask: 0000000000000001 => -1
perf: bench/numa.c:356: bind_to_memnode: Assertion `!(ret)' failed.
Aborted (core dumped)
This happens when the cpu0 is not part of node0, which is the benchmark
assumption and we can see that's not the case for some powerpc servers.
Using correct node for cpu0 binding.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190801142642.28004-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Having static variable `cpus` in libbpf_num_possible_cpus function
without guarding it with mutex makes this function thread-unsafe.
If multiple threads accessing this function, in the current form; it
leads to incrementing the static variable value `cpus` in the multiple
of total available CPUs.
Used local stack variable to calculate the number of possible CPUs and
then updated the static variable using WRITE_ONCE().
Changes since v1:
* added stack variable to calculate cpus
* serialized static variable update using WRITE_ONCE()
* fixed Fixes tag
Fixes: 6446b31555 ("bpf: add a new API libbpf_num_possible_cpus()")
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The -d command line argument to tdc requires the name of a physical device
on the system where the tests will be run. If -d has not been used, tdc
will skip tests that require a physical device.
This patch is intended to better document what the -d option does and how
it is used.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build bot reports some recent TLS tests are failing
with CONFIG_TLS=n. Correct the expected return code
and skip TLS installation if not supported.
Tested with CONFIG_TLS=n and CONFIG_TLS=m.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: cf32526c88 ("selftests/tls: add a test for ULP but no keys")
Fixes: 65d41fb317 ("selftests/tls: add a bidirectional test")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit dedfde2fe1 ("mlxsw: spectrum_dcb: Configure DSCP map as the last
rule is removed") fixed a problem in mlxsw where last DSCP rule to be
removed remained in effect when DSCP rewrite was applied.
Add a selftest that covers this problem.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These two tests have some problems in the global scope pollution and on
contrary, contain unnecessary local declarations. Fix them.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takshak said in the original submission:
With different bpf attach_flags available to attach bpf programs specially
with BPF_F_ALLOW_OVERRIDE and BPF_F_ALLOW_MULTI, the list of effective
bpf-programs available to any sub-cgroups really needs to be available for
easy debugging.
Using BPF_F_QUERY_EFFECTIVE flag, one can get the list of not only attached
bpf-programs to a cgroup but also the inherited ones from parent cgroup.
So a new option is introduced to use BPF_F_QUERY_EFFECTIVE query flag here
to list all the effective bpf-programs available for execution at a specified
cgroup.
Reused modified test program test_cgroup_attach from tools/testing/selftests/bpf:
# ./test_cgroup_attach
With old bpftool:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/
ID AttachType AttachFlags Name
271 egress multi pkt_cntr_1
272 egress multi pkt_cntr_2
Attached new program pkt_cntr_4 in cg2 gives following:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2
ID AttachType AttachFlags Name
273 egress override pkt_cntr_4
And with new "effective" option it shows all effective programs for cg2:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2 effective
ID AttachType AttachFlags Name
273 egress override pkt_cntr_4
271 egress override pkt_cntr_1
272 egress override pkt_cntr_2
Compared to original submission use a local flag instead of global
option.
We need to clear query_flags on every command, in case batch mode
wants to use varying settings.
v2: (Takshak)
- forbid duplicated flags;
- fix cgroup path freeing.
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Clear buffered output once test or subtests finishes even if test was
successful. Not doing this leads to accumulation of output from previous
tests and on first failed tests lots of irrelevant output will be
dumped, greatly confusing things.
v1->v2: fix Fixes tag, add more context to patch
Fixes: 3a516a0a3a ("selftests/bpf: add sub-tests support for test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Modify the existing bpf_tcp_check_syncookie test to also generate a
SYN cookie, pass the packet to the kernel, and verify that the two
cookies are the same (and both valid). Since cloned SKBs are skipped
during generic XDP, this test does not issue a SYN cookie when run in
XDP mode. We therefore only check that a valid SYN cookie was issued at
the TC hook.
Additionally, verify that the MSS for that SYN cookie is within
expected range.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync updated documentation for bpf_redirect_map.
Sync the bpf_tcp_gen_syncookie helper function definition with the one
in tools/uapi.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests. Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.
Note this functionality needs to keep in sync with:
- dynamic_debug input/output formatting
- functions affected by set_dynamic_debug()
For example, push_dynamic_debug() transforms:
kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
to the following:
file kernel/livepatch/transition.c line 530 =_
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, using "%m" in a ksft_* format string can result in strange
output because the errno value wasn't saved before calling other libc
functions. The solution is to simply save and restore the errno before
we format the user-supplied format string.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull pidfd fixes from Christian Brauner:
"This makes setting the exit_state in exit_notify() consistent after
fixing the pidfd polling race pre-rc1. Related to the race fix, this
adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state
races.
Last, this removes an obsolete comment from the pidfd tests"
* tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: make setting exit_state consistent
pidfd: Add warning if exit_state is 0 during notification
pidfd: remove obsolete comments from test
Pull kselftest fixes from Shuah Khan:
"Minor fixes to tests and one major fix to livepatch test to add skip
handling to avoid false fail reports when livepatch is disabled"
* tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: add test skip handling
selftests: mlxsw: Fix typo in qos_mc_aware.sh
selftests/x86: fix spelling mistake "FAILT" -> "FAIL"
selftests: kmod: Fix typo in kmod.sh
