Pull sound updates from Takashi Iwai:
"As shown in diffstat and logs, it was again a busy development cycle
at this time, too. The most significant changes are still on-going
refactoring / modernization works for ASoC core and drivers, but there
are lots of other changes as well. Here we go, some highlights below:
ASoC:
- Quite a lot of cleanup / refactoring of ASoC core and APIs; most of
them are systematic, but also including cleanups and modernization
- A bulk of updates for some ASoC platforms, Freescale, sunxi and
Intel SST/SOF
- Initial support for Sound Open Firmware on i.MX8
- Removal of deprecated w90x900 and nuc900 drivers
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
7ULP and 8MQ, Meson G12A and NXP UDA1334
USB-audio:
- More validations of descriptor units for hardening against bugs
reported by fuzzers
- PCM device assignment workaround for a past call-order change
- Scarlett Gen2 mixer interface, a few more more quirks
HD-audio:
- Support for audio component with AMD/ATI and Nvidia HDMI codecs
- Clean up HD-audio core and remove indirect access ops for Intel SOF
- DMIC detection at probe; it would make systems automatically
falling back to SST/SOF driver on devices that need DMIC handling.
Needs a new Kconfig to set, and beware that it's still new and a
bit experimental
FireWire:
- Lots of code refactoring and cleanups"
* tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits)
ASoC: sdm845: remove unneeded semicolon
ASoC: fsl_sai: Implement set_bclk_ratio
ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name
ASoC: wcd9335: remove redundant use of ret variable
ALSA: firewire-tascam: check intermediate state of clock status and retry
ALSA: firewire-tascam: handle error code when getting current source of clock
ASoC: hdmi-codec: Add an op to set callback function for plug event
ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF
ASoC: rt5677: Remove magic number register writes
ASoC: soc-core: self contained soc_unbind_aux_dev()
ASoC: soc-core: add soc_unbind_aux_dev()
ASoC: soc-core: self contained soc_bind_aux_dev()
ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais()
ASoC: soc-core: self contained soc_probe_link_dais()
ASoC: soc-core: add new soc_link_init()
ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai()
ASoC: soc-core: self contained soc_remove_link_dais()
ASoC: soc-core: self contained soc_remove_link_components()
ASoC: soc-core: self contained soc_probe_link_components()
ASoC: rt1308: make array pd static const, makes object smaller
...
We should only select SND_INTEL_NHLT when ACPI is defined. This was
done for the legacy HDAudio driver but not for DSP-enabled cases,
leading to compilation errors with randconfig.
Fix by aligning on the same solution.
For the Skylake driver this is overkill since there is a top-level
dependency on ACPI, but it doesn't hurt and it's better to have
consistency.
Fixes: 68b953aeb5 ('ASoC: SOF: Intel: hda: fixup HDaudio topology name with DMIC number')
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190829214213.11653-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Apart from Haswell machines, all other devices have their private data
set to snd_soc_acpi_mach instance.
Changes for HSW/ BDW boards introduced with series:
https://patchwork.kernel.org/cover/10782035/
added support for dai_link platform_name adjustments within card probe
routines. These take for granted private_data points to
snd_soc_acpi_mach whereas for Haswell, it's sst_pdata instead. Change
private context of platform_device - representing machine board - to
address this.
Fixes: e87055d732 ("ASoC: Intel: haswell: platform name fixup support")
Fixes: 7e40ddcf97 ("ASoC: Intel: bdw-rt5677: platform name fixup support")
Fixes: 2d067b2807 ("ASoC: Intel: broadwell: platform name fixup support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-2-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit a182ecd380 ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Link: https://lore.kernel.org/r/20190815171300.30126-1-daniel.stuart14@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit a182ecd380 ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Link: https://lore.kernel.org/r/20190815171300.30126-1-daniel.stuart14@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LARGE_CONFIG_GET is mainly used to retrieve requested module parameters
but it may also carry TX payload with them. Update its implementation to
account for both TX and RX data.
First reply.header carries total payload size within data_off_sizefield.
Make use of reply.header to realloc returned buffer with correct size.
Failure of IPC request is permissive - error-payload may be returned, an
informative data why GET for given param failed - and thus function
should not collapse before entire processing is finished. Caller is
responsible for checking returned payload and bytes parameters.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190808181549.12521-3-cezary.rojewski@intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HD-audio drivers access to the mmio registers indirectly via the
corresponding bus->io_ops callbacks. This is because some platform
(notably Tegra SoC) requires the word-aligned access. But it's rather
a rare case, and other platforms suffer from the penalties by indirect
calls unnecessarily.
This patch is an attempt to optimize and cleanup for this situation.
Now the special aligned access is used only when a new kconfig
CONFIG_SND_HDA_ALIGNED_MMIO is set. And the HD-audio core itself
provides the aligned MMIO access helpers instead of the driver side.
If Kconfig isn't set (as default), the standard helpers like readl()
or writel() are used directly.
A couple of places in ASoC Intel drivers have the access via io_ops
reg_writel(), and they are replaced with the direct writel() calls.
And now with this patch, the whole bus->io_ops becomes empty, so it's
dropped completely. The bus initialization functions are changed
accordingly as well to drop the whole bus->io_ops.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio core allocates and releases pages via driver's specific
dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This
was because some platforms require the uncached pages and the handling
of page flags had to be done locally in the driver code.
Since the recent change in ALSA core memory allocator, we can simply
pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only
difference became about this type to be passed to the core allocator.
That is, it's good time for cleaning up the mess.
This patch changes the allocation code in HD-audio core to call the
core allocator directly so that we get rid of dma_alloc_pages and
dma_free_pages io_ops. If a driver needs the uncached pages, it has
to set bus->dma_type right after the bus initialization.
This is merely a code refactoring and shouldn't bring any behavior
changes.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct ipc_message contains fields: header, tx_data and tx_size which
represent TX i.e. request while RX is represented by rx_data and rx_size
with reply's header equivalent missing.
Reply header may contain some vital information including, but not
limited to, received payload size. Some IPCs have entire payload found
within RX header instead. Content and value of said header is context
dependent and may vary between firmware versions and target platform.
Current model does not allow such IPCs to function at all.
Rather than appending yet another parameter to an already long list of
such for sst_ipc_tx_message_XXXs, declare message container in form of
struct sst_ipc_message and add them to parent's ipc_message declaration.
Align haswell, baytrail and skylake with updated request-reply model and
modify their reply processing functions to save RX header within message
container. Despite the range of changes, status quo is achieved.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723144341.21339-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v5.3
A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.
The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.
As per FW Interface Modules Configuration, init instance IPC request
requires base initial module configuration. This configuration structure
is made of:
- cpc (chunks per cycle)
- ibs (input buffer size)
- obs (output buffer size)
- is_pages (memory pages required)
- audio_fmt (self explanatory)
Skylake topology accepts following tokens: MCPS, CPS and CPC. All of
these are directly connected. Moreover, assigning one of these allows
to calculate the remaining two. In simplest scenario and assuming 1ms
scheduling, following is true:
CPS = CPC times 1000
MCPS = CPS times 1000 000
Note: these calculations vary depending on scenario and scheduling
requirements.
Given the current implementation, userspace is allowed to provide
different values for all three causing informational chaos. On top of
that, struct skl_base_cfg which represents base module configuration,
incorrectly takes CPS param instead of CPC.
This ambiguity may lead to user unintentionally providing improper
values to DSP firmware and thus impacting module scheduling in
unexpected fashion. Fix by making MCPS and CPS topology params obsolete
and relying solely on CPC value.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As per FW team recommendation we should not disable notifications.
By default, all notifications are enabled in DSP firmware. These
notifications provide a vital information whenever an error occurs.
Currently, driver disables them during boot sequences. By doing so,
Skylake may silently ignore severe stream errors.
Correct that by removing permissive code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The entire logic for MCPS calculation and DSP scheduling is found
within DSP firmware. Currently driver implements simplistic, inaccurate
logic itself which may prevent pipeline creation despite firmware being
completely fine its parameters.
Remove that logic and leave the MCPS calculation to DSP alone.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As both modules are core part of Skylake driver and none can live
without the other, combine snd_soc_skl_ipc and snd_soc_skl.
It's highly probable IPC module was to be treated as an interface for
platform specific code implementations e.g.: possibility of existence of
BXT specific code without SKL one. However, most funtionalities are
being inherited from one DSP firmware to another, and thus this
assumption fails.
skl-sst, bxt-sst and cnl-sst are not individuals pointing respectively
to SKL (cAVS 1.5), BXT (cAVS 1.5+) & CNL (cAVS 1.8) standalone
implementations. Code found within these is shared among all platforms
whenever necessary to avoid code duplication and reduce development
burden.
Merge also helps in cleaning up internal code in future changes.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
