We have extra indentation level where it can be avoided by changing conditional
to the inverted one.
Do it here for three such locations in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no need to open code clamp_val() macro implementation.
Replace the corresponding lines with direct call to clamp_val().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The use of sscanf() is an overkill here. Moreover, there is no need to check
for count to be 0, since it's guaranteed by sysfs not to be.
Taking above into account, replace sscanf() with kstrtoint() calls.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are few issues with the current code:
- the error code from kstrtouint() is shadowed
- the error code from asus_wmi_set_devstate() is ignored
- the extra check against 0 for count (this is guaranteed by sysfs)
Fix these issues by doing a slight refactoring of charge_threshold_store().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Most newer ASUS laptops supports limiting the battery charge level, which
help prolonging the battery life.
Tested on a Zenbook UX430UNR.
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Notice that intel_button_array_enable() never disables the power
button which is the only one needed to wake up the system from
suspend-to-idle, so it can be safely called during suspend-to-idle
as well as during "regular" system suspend, and rearrange the
code in the driver's "suspend" and "resume" callbacks accordingly.
While at it, use pm_suspend_no_platform() to check if the current
suspend-resume cycle is suspend-to-idle, as that is the only
case when the device should be enabled while suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Both intel-hid and intel-vbtn set a wakeup_mode flag causing them
to behave in a special way during system suspend and while suspended
in their "prepare" PM callbacks and clear it in their "resume" PM
callbacks. That may cause the wakeup_mode flag to remain set after
a system suspend failure (if some other driver's "suspend" callback
returns an error before the "suspend" callback of either intel-hid
or intel-vbtn is invoked).
After commit 10a08fd65e ("ACPI: PM: Set up EC GPE for system wakeup
from drivers that need it") that also affects the "wakeup mask" bit
of the EC GPE, which may not be cleared after a failing system
suspend.
Fix this issue by adding "complete" PM callbacks to intel-hid and
intel-vbtn to clear the wakeup_mode flag and the "wakeup mask" bit
of the EC GPE if they have not been cleared earlier.
Fixes: 10a08fd65e ("ACPI: PM: Set up EC GPE for system wakeup from drivers that need it")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Darren Hart (VMware)" <dvhart@infradead.org>
Cc: Roman Kiryanov <rkir@google.com>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Darren Hart (VMware)" <dvhart@infradead.org>
Cc: Roman Kiryanov <rkir@google.com>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Darren Hart (VMware)" <dvhart@infradead.org>
Cc: Roman Kiryanov <rkir@google.com>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Darren Hart (VMware)" <dvhart@infradead.org>
Cc: Roman Kiryanov <rkir@google.com>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Previously, asus-wmi was using the AGFN interface and FAN_CTRL device
for CPU fan control. However, this code has been found to be not fully
working on some recent products, and having checked the spec, these
interfaces are marked as being removed from future products currently
in development.
The replacement appears to be the CPU_FAN device, added in spec version
8.3 (March 2014) and present on many modern Asus laptops.
Add support for this device, and use it whenever it is detected.
The older approach based on AGFN and FAN_CTRL is used as a fallback
on products that do not have such device.
Other than switching between automatic and full speed, there is
no fan speed control through this new interface.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Factor out the WLAN LED and lightbar LED presence checks into a
helper function, which will also be used by the upcoming CPU fan device
support.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The asus-wmi driver currently uses the "AGFN" interface and
the FAN_CTRL device for fan control. According to the spec, this
interface is very dated and marked as pending removal from products
currently in development.
Clean up the way that the AGFN fan is detected and handled, also
preparing the driver for the introduction of an alternate fan
control method needed to support recent Asus products.
Not anticipating further development of this interface, simplify
the code by dropping any notion of being able to control multiple
AGFN fans (this was already limited to just a single fan through only
exposing a single fan in sysfs).
Check for the presence of AGFN fans at probe time, simplifying the code
flow in asus_hwmon_sysfs_is_visible().
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The APU3+ boards have two SIM sockets, while only one of them
can be routed to the mpcie slots at a time. Selection is done
via simswap gpio.
We currently don't have a fitting subsystem for those cases yet,
so just wire it up to a LED for the time being. While this isn't
really semantically correct, it's a good compromise.
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
On APUx we have also mpcie2/mpcie3 reset pins. To make it possible to reset
the ports from the userspace, add the definition to this platform
device. The gpio can then be exported by the legancy gpio subsystem to
toggle the mpcie reset pin.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Acked-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array.
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
There's a wmi event generated by dell-wmi when pressing keyboard backlight
toggle key:
[1224178.355650] dell_wmi: Unknown key with type 0x0011 and code 0x01e3 pressed
This event is for notification purposes, let's ignore it.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There's a wmi event generated by dell-wmi when pressing keyboard backlight
toggle key:
[1224203.948894] dell_wmi: Unknown key with type 0x0011 and code 0x01e2 pressed
This event is for notification purposes, let's ignore it.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The acpi_dev_get_first_match_dev() helper will find and return
an ACPI device pointer of the first registered device in the system
by its HID.
Use it instead of open coded variant.
Cc: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
acpi_has_method() is unnecessary within __query_block() and should be
removed to avoid extra work.
wc_status is initialized to AE_ERROR before the acpi_has_method() call.
acpi_has_method() and acpi_execute_simple_method() failing due to the
method not existing will result in the same outcome from __query_block().
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360). It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.
For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.
While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).
[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
are there to prevent the EC GPE from being disabled by the
acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
systems with either intel-hid or intel-vbtn this change doesn't
affect any interactions with the hardware or platform firmware.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The keycode KEY_RESTART is more appropriate for the front button,
as most people use it for things like restart or factory reset.
Signed-off-by: Enrico Weigelt <info@metux.net>
Fixes: f8eb0235f6 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Kernel crashes during suspend due to wrong conversion in
suspend and resume functions.
Use the proper helper to get ishtp_cl_device instance.
Cc: <stable@vger.kernel.org> # 5.2.x: b12bbdc5: HID: intel-ish-hid: fix wrong driver_data usage
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Do not use the surfacepro3_button driver on newer Microsoft Surface
models, only use it on the Surface Pro 3 and 4. Newer models (5th, 6th
and possibly future generations) use the same device as the Surface Pro
4 to represent their volume and power buttons (MSHW0040), but their
actual implementation is significantly different. This patch ensures
that the surfacepro3_button driver is only used on the Pro 3 and 4
models, allowing a different driver to bind on other models.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The SPI bus creates a device with the modalias of "xo1.75-ec". This
fixes XO-1.75 EC driver autoloading
Fixes: 0c3d931b3a ("Platform: OLPC: Add XO-1.75 EC driver")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Asus WMI spec indicates that the function being controlled here
is called "Fan Boost Mode". The user-facing documentation also calls it
this.
The spec uses the term "fan mode" is used to refer to other things,
including functionality expected to appear on future products.
We missed this before as we are not dealing with the most readable of
specs, and didn't forsee any confusion around shortening the name.
Rename "fan mode" to "fan boost mode" to improve consistency with the
spec and to avoid a future naming conflict.
There is no interface breakage here since this has yet to be included
in an official kernel release. I also updated the kernel version listed
under ABI accordingly.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Pull rst conversion of docs from Mauro Carvalho Chehab:
"As agreed with Jon, I'm sending this big series directly to you, c/c
him, as this series required a special care, in order to avoid
conflicts with other trees"
* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
docs: kbuild: fix build with pdf and fix some minor issues
docs: block: fix pdf output
docs: arm: fix a breakage with pdf output
docs: don't use nested tables
docs: gpio: add sysfs interface to the admin-guide
docs: locking: add it to the main index
docs: add some directories to the main documentation index
docs: add SPDX tags to new index files
docs: add a memory-devices subdir to driver-api
docs: phy: place documentation under driver-api
docs: serial: move it to the driver-api
docs: driver-api: add remaining converted dirs to it
docs: driver-api: add xilinx driver API documentation
docs: driver-api: add a series of orphaned documents
docs: admin-guide: add a series of orphaned documents
docs: cgroup-v1: add it to the admin-guide book
docs: aoe: add it to the driver-api book
docs: add some documentation dirs to the driver-api book
docs: driver-model: move it to the driver-api book
docs: lp855x-driver.rst: add it to the driver-api book
...
Pull i2c updates from Wolfram Sang:
"New stuff from the I2C world:
- in the core, getting irqs from ACPI is now similar to OF
- new driver for MediaTek MT7621/7628/7688 SoCs
- bcm2835, i801, and tegra drivers got some more attention
- GPIO API cleanups
- cleanups in the core headers
- lots of usual driver updates"
* 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits)
i2c: mt7621: Fix platform_no_drv_owner.cocci warnings
i2c: cpm: remove casting dma_alloc
dt-bindings: i2c: sun6i-p2wi: Fix the binding example
dt-bindings: i2c: mv64xxx: Fix the example compatible
i2c: i801: Documentation update
i2c: i801: Add support for Intel Tiger Lake
i2c: i801: Fix PCI ID sorting
dt-bindings: i2c-stm32: document optional dmas
i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support
i2c: core: Tidy up handling of init_irq
i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
i2c: core: Move ACPI IRQ handling to probe time
i2c: acpi: Factor out getting the IRQ from ACPI
i2c: acpi: Use available IRQ helper functions
i2c: core: Allow whole core to use i2c_dev_irq_from_resources
eeprom: at24: modify a comment referring to platform data
dt-bindings: i2c: omap: Add new compatible for J721E SoCs
dt-bindings: i2c: mv64xxx: Add YAML schemas
dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
...
There are lots of documents under Documentation/*.txt and a few other
orphan documents elsehwere that belong to the driver-API book.
Move them to their right place.
Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts
Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rename the laptops documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Pull x86 platform driver updates from Andy Shevchenko:
"Gathered a bunch of x86 platform driver changes. It's rather big,
since includes two big refactors and completely new driver:
- ASUS WMI driver got a big refactoring in order to support the TUF
Gaming laptops. Besides that, the regression with backlight being
permanently off on various EeePC laptops has been fixed.
- Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
X axis being inverted. This has been fixed.
- Intel PMC core driver has been extended to be ACPI enumerated if
the DSDT provides device with _HID "INT33A1". This allows to
convert the driver to be pure platform and support new hardware
purely based on ACPI DSDT.
- From now on the Intel Speed Select Technology is supported thru a
corresponding driver. This driver provides an access to the
features of the ISST, such as Performance Profile, Core Power, Base
frequency and Turbo Frequency.
- Mellanox platform drivers has been refactored and now extended to
support more systems, including new coming ones.
- The OLPC XO-1.75 platform is now supported.
- CB4063 Beckhoff Automation board is using PMC clocks, provided via
pmc_atom driver, for ethernet controllers in a way that they can't
be managed by the clock driver. The quirk has been extended to
cover this case.
- Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
the information of Chuwi Hi10 Air has been fixed to cover more
models based on the same platform.
- Xiaomi notebooks have WMI interface enabled. Thus, the driver to
support it has been provided. It required some extension of the
generic WMI library, which allows to propagate opaque context to
the ->probe() of the individual drivers.
This release includes debugfs clean up from Greg KH for several
drivers that drop return code check and make debugfs absence or
failure non-fatal.
Also miscellaneous fixes here and there, mostly for Acer WMI and
various Intel drivers"
* tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
platform/x86: Fix PCENGINES_APU2 Kconfig warning
tools/power/x86/intel-speed-select: Add .gitignore file
platform/x86: mlx-platform: Fix error handling in mlxplat_init()
platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"
platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds
platform/x86: asus-wmi: Use dev_get_drvdata()
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/x86: mlx-platform: Add more reset cause attributes
platform/x86: mlx-platform: Modify DMI matching order
platform/x86: mlx-platform: Add regmap structure for the next generation systems
platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation
platform/x86: mlx-platform: Move regmap initialization before all drivers activation
MAINTAINERS: Update for Intel Speed Select Technology
tools/power/x86: A tool to validate Intel Speed Select commands
platform/x86: ISST: Restore state on resume
platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface
platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs
platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI
platform/x86: ISST: Add Intel Speed Select mmio interface
platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
...
Add the missing platform_device_unregister() before return
from mlxplat_init() in the error handling case.
Fixes: 6b266e91a0 ("platform/x86: mlx-platform: Move regmap initialization before all drivers activation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
