Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The three paths to build the umem_odps are kind of muddled, they are:
- As a normal ib_mr umem
- As a child in an implicit ODP umem tree
- As the root of an implicit ODP umem tree
Only the first two are actually umem's, the last is an abuse.
The implicit case can only be triggered by explicit driver request, it
should never be co-mingled with the normal case. While we are here, make
sensible function names and add some comments to make this clearer.
Link: https://lore.kernel.org/r/20190819111710.18440-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implicit ODP umems are special, they don't have any page lists, they don't
exist in the interval tree and they are never DMA mapped.
Instead of trying to guess this based on a zero length use an explicit
flag.
Further, do not allow non-implicit umems to be 0 size.
Link: https://lore.kernel.org/r/20190819111710.18440-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ODP depends on the several device capabilities, among them is the ability
to send UMR WQEs with that modify atomic and entity size of the MR.
Therefore, only if all conditions to send such a UMR WQE are met then
driver can report that ODP is supported. Use this check of conditions
in all places where driver needs to know about ODP support.
Also, implicit ODP support depends on ability of driver to send UMR WQEs
for an indirect mkey. Therefore, verify that all conditions to do so are
met when reporting support.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order. A stale TID RDMA data packet
could lead to TidErr if the TID entries have been released by duplicate
data packets generated from retries, and subsequently erroneously force
the qp into error state in the current implementation.
Since the payload has already been dropped by hardware, the packet can
be simply dropped and it is no longer necessary to put the qp into
error state.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192058.105923.72324.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
the sender could receive stale TID RDMA NAK packets that contain newer
KDETH PSNs and older Verbs PSNs. If not dropped, these packets could
cause the incorrect rewinding of the software flows and the incorrect
completion of TID RDMA WRITE requests, and eventually leading to memory
corruption and kernel crash.
The current code drops stale TID RDMA ACK/NAK packets solely based
on KDETH PSNs, which may lead to erroneous processing. This patch
fixes the issue by also checking the Verbs PSN. Addition checks are
added before rewinding the TID RDMA WRITE DATA packets.
Fixes: 9e93e967f7 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192033.105923.44192.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'insmod hns_roce_hw_v2.ko', the
calltrace is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_v2_init_eq_table+0x1324/0x1948
[hns_roce_hw_v2]
Read of size 8 at addr ffff8020e7a10608 by task insmod/256
CPU: 0 PID: 256 Comm: insmod Tainted: G O 5.2.0-rc4 #1
Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_v2_init_eq_table+0x1324/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 256:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_v2_init_eq_table+0x764/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8020e7a10600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff8020e7a10600, ffff8020e7a10680)
The buggy address belongs to the page:
page:ffff7fe00839e840 refcount:1 mapcount:0 mapping:ffff802340020200 index:0x0
flags: 0x5fffe00000000200(slab)
raw: 5fffe00000000200 dead000000000100 dead000000000200 ffff802340020200
raw: 0000000000000000 0000000081000100 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8020e7a10500: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff8020e7a10580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8020e7a10600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8020e7a10680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8020e7a10700: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'rmmod hns_roce_hw_v2', the calltrace
is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_table_mhop_put+0x584/0x828
[hns_roce]
Read of size 8 at addr ffff802185e08300 by task rmmod/270
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_table_mhop_put+0x584/0x828 [hns_roce]
hns_roce_table_put+0x174/0x1a0 [hns_roce]
hns_roce_mr_free+0x124/0x210 [hns_roce]
hns_roce_dereg_mr+0x90/0xb8 [hns_roce]
ib_dealloc_pd_user+0x60/0xf0
ib_mad_port_close+0x128/0x1d8
ib_mad_remove_device+0x94/0x118
remove_client_context+0xa0/0xe0
disable_device+0xfc/0x1c0
__ib_unregister_device+0x60/0xe0
ib_unregister_device+0x24/0x38
hns_roce_exit+0x3c/0x138 [hns_roce]
__hns_roce_hw_v2_uninit_instance.isra.30+0x28/0x50 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance+0x44/0x60 [hns_roce_hw_v2]
hclge_uninit_client_instance+0x15c/0x238 [hclge]
hnae3_uninit_client_instance+0x84/0xa8 [hnae3]
hnae3_unregister_client+0x84/0x158 [hnae3]
hns_roce_hw_v2_exit+0x14/0x20 [hns_roce_hw_v2]
__arm64_sys_delete_module+0x20c/0x308
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 255:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_init_hem_table+0x20c/0x428 [hns_roce]
hns_roce_init+0x214/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
0xffff200009c00014
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff802185e06300
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes to the right of
8192-byte region [ffff802185e06300, ffff802185e08300)
The buggy address belongs to the page:
page:ffff7fe008617800 refcount:1 mapcount:0 mapping:ffff802340020e00 index:0x0
compound_mapcount: 0
flags: 0x5fffe00000010200(slab|head)
raw: 5fffe00000010200 dead000000000100 dead000000000200 ffff802340020e00
raw: 0000000000000000 00000000803e003e 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff802185e08200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff802185e08280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff802185e08300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff802185e08380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff802185e08400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When exiting "for loop", the actual value of pi will be
increased by 1, which is compatible with the next calculation.
But when pi is equal to "ci + hr_cq-> ib_cq.cqe", the "break"
was called and the pi is actual value, it will lead one cqe
still existing, so the "==" should be modify to ">".
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-5-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging tip of mlx5-next in order to get changes related to adding
XRQ support to the DEVX interface needed prior to the following two
patches.
Signed-off-by: Doug Ledford <dledford@redhat.com>
