Although EHL added a third combo PHY, no PHY_MISC register was added for
PHY C. The bspec indicates that there's no need to program the "DE to
IO Comp Pwr Down" setting for this PHY that we usually need to set in
PHY_MISC.
v2:
- Add IS_ELKHARTLAKE() guards since future platforms that have a PHY C
are likely to reinstate the PHY_MISC register. (Jose)
- Use goto's to skip PHY_MISC programming & minimize code deltas. (Jose)
Bspec: 33148
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626000352.31926-4-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
I'm not entirely sure why this is, but for some reason:
921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the
pre-production laptops I have. The issue manifests as the following
messages in dmesg:
[drm] UVD and UVD ENC initialized successfully.
amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110).
And happens after about 6-10 runtime PM suspend/resume cycles (sometimes
sooner, if you're lucky!). Unfortunately I can't seem to pin down
precisely which part in psm_adjust_power_state_dynamic that is causing
the issue, but not skipping the display setting setup seems to fix it.
Hopefully if there is a better fix for this, this patch will spark
discussion around it.
Fixes: 921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disconnecting the TypeC PHY when the port is in legacy mode is not
necessary:
- BSpec doesn't specify a disconnect sequence for legacy mode.
- The use of the PHY is dedicated for the display in legacy mode.
- We keep the PHY always connected during runtime as well in legacy
mode.
We disconnect the PHY when needed during a disabling modeset for the
port, so we can also remove the disconnect call from the destroy hook.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-23-imre.deak@intel.com
Add state verification for the TypeC port mode wrt. the port's AUX power
well enabling/disabling. Also check the correctness of changing the port
mode:
- When enabling/disabling the AUX power well for a TypeC port we must hold
the TypeC port lock - the case for AUX transfers - or hold a Type C
port link reference - the case for modeset enabling/disabling.
- When changing the TypeC port mode the port's AUX power domain must be
disabled.
v2: (Ville)
- Simplify power_well_async_ref_count().
- Fix the commit log, clarifying what are the valid conditions to
enable/disable the AUX power wells.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-22-imre.deak@intel.com
The TypeC port mode needs to stay fixed whenever the port is active. Do
that by introducing a tc_link_refcount to account for active ports,
avoiding changing the port mode if a reference is held.
During the modeset commit phase we also have to reset the port mode and
update the active PLL reflecting the new port mode. We can do this only
once the port and its old PLL has been already disabled. Add the new
encoder update_prepare/complete hooks that are called around the whole
enabling sequence. The TypeC specific hooks of these will reset the port
mode, update the active PLL if the port will be active and ensure that
the port mode will stay fixed for the duration of the whole enabling
sequence by holding a tc_link_refcount.
During the port enabling, the pre_pll_enable/post_pll_disable hooks will
take/release a tc_link_refcount to ensure the port mode stays fixed
while the port is active.
Changing the port mode should also be avoided during connector detection
and AUX transfers if the port is active, we'll do that by checking the
port's tc_link_refcount.
When resetting the port mode we also have to take into account the
maximum lanes provided by the FIA. It's guaranteed to be 4 in TBT-alt
and legacy modes, but there may be less lanes available in DP-alt mode,
in which case we have to fall back to TBT-alt mode.
While at it also update icl_tc_phy_connect()'s code comment, reflecting
the current way of switching the port mode.
v2:
- Add the update_prepare/complete hooks to the encoder instead of the
connector. (Ville)
- Simplify intel_connector_needs_modeset() by removing redundant if.
(Ville)
v3:
- Fix sparse warning, marking static functions as such.
v4:
- Rebase on drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-21-imre.deak@intel.com
When enabling a TypeC port we need to reserve all the required PLLs for
it, the TBT PLL for TBT-alt and the MG PHY PLL for DP-alt/legacy sinks.
We can select the proper PLL for the current port mode from the reserved
PLLs only once we selected and locked down the port mode for the whole
duration of the port's active state. Resetting and locking down the port
mode can in turn happen only during the modeset commit phase once we
disabled the given port and the PLL it used.
To support the above reserve-and-select PLL semantic we store the
reserved PLLs along with their HW state in the CRTC state and provide a
way to select the active PLL from these. The selected PLL along with its
HW state will be pointed at by crtc_state->shared_dpll/dpll_hw_state as
in the case of other port types.
Besides reserving all required PLLs no functional changes.
v2:
- Fix releasing the ICL PLLs, not clearing the PLLs from the old
crtc_state.
- Init port_dpll to ICL_PORT_DPLL_DEFAULT closer to where port_dpll is
used for symmetry with the corresponding ICL_PORT_DPLL_MG_PHY init.
(Ville)
v3:
- Add FIXME: for clearing the ICL port PLLs from the new crtc state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-20-imre.deak@intel.com
For consistency s/intel_get_shared_dpll()/intel_reserve_shared_dplls()/
to better match intel_release_shared_dplls(). Also, pass to the
reserve/release and get_dplls/put_dplls hooks the intel_atomic_state and
CRTC object, that way these functions can look up the old or new state
as needed.
Also release the PLLs from the atomic state via a new
put_dplls->intel_unreference_shared_dpll() call chain for better
symmetry with the reservation via the
get_dplls->intel_reference_shared_dpll() call chain.
Since nothing uses the PLL returned by intel_reserve_shared_dplls(),
make it return only a bool.
While at it also clarify the reserve/release function docbook headers
making it clear that multiple DPLLs will be reserved/released and
whether the new or old atomic CRTC state is affected.
This refactoring is also a preparation for a follow-up change that needs
to reserve multiple DPLLs.
Kudos to Ville for the idea to pass intel_atomic_state around, to make
things clearer locally where an object's old/new atomic state is
required.
No functional changes.
v2:
- Fix checkpatch issue: typo in code comment.
v3:
- Rebase on drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-17-imre.deak@intel.com
We must keep the TypeC port mode fixed for the duration of the connector
detection and each AUX transfers. Add a new TypeC lock holding it around
these two sequences. For consistency also hold the lock during the port
mode sanitization.
Whenever resetting the port mode (only during the detection for now) the
port's AUX power domain must be disabled already. Flush the async power
domain disabling work to ensure this.
A follow-up patch will make the port mode changing more robust by
postponing the change for active ports.
v2:
- Fix checkpatch issue: missing annotation for tc_lock.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-15-imre.deak@intel.com
For using the correct AUX power domains we have to sanitize the TypeC
port mode early, so move that before encoder sanitization. To do this
properly read out the actual port mode instead of just relying on the
VBT legacy port flag (which can be incorrect).
We also verify that the PHY is connected as expected if the port is
active. In case the port is inactive we connect the PHY in case of a
legacy port - as we did so far. The PHY will be connected during
detection for DP-alt mode - as it was done so far. For TBT-alt mode
nothing needs to be done to connect the PHY.
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Detect TCCOLD any time PORT_TX_DFLEXDPCSSS is read. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-14-imre.deak@intel.com
Based on a recent BSpec update (Index/21750) we must handle the TCCOLD
event associated with the DP-alt mode. We can detect this event by
reading an invalid all-1s value from FIA registers.
After detecting TCCOLD we will:
- fall back to TBT-alt mode when attempting to switch to DP-alt mode
- conclude that nothing is connected during live status detection
- WARN when already in unsafe mode, since then TCCOLD is unexpected
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Use 0xffffffff instead of -1 as invalid FIA reg value.
(José, Ville)
- Check for TCCOLD in icl_tc_phy_status_complete() too. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-12-imre.deak@intel.com
Factor out helpers reading/parsing the TypeC specific registers, making
current users of them clearer and letting us use them later.
While at it also:
- Simplify icl_tc_phy_connect() with an early return in legacy mode.
- Simplify the live status check using one bitmask for all HPD bits.
- Remove a micro-optimisation of the repeated safe-mode clearing.
- Make sure we fix the legacy port flag in all cases.
Except for the last two, no functional changes.
v2:
- Don't do reg reads at variable declarations. (Jani)
- Prevent constant truncated compiler warning when assigning the
valid_hpd_mask. (Nick)
- s/intel_tc_port_get_lane_info/intel_tc_port_get_lane_mask/ (Ville)
v3:
- Make valid_hpd_mask init clear. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-10-imre.deak@intel.com
When using an I2S source using a different clock source (usually the I2S
audio HW uses dedicated PLLs, different from the HDMI PHY PLL), fixed
CTS values will cause some frequent audio drop-out and glitches as
reported on Amlogic, Allwinner and Rockchip SoCs setups.
Setting the CTS in automatic mode will let the HDMI controller generate
automatically the CTS value to match the input audio clock.
The DesignWare DW-HDMI User Guide explains:
For Automatic CTS generation
Write "0" on the bit field "CTS_manual", Register 0x3205: AUD_CTS3
The DesignWare DW-HDMI Databook explains :
If "CTS_manual" bit equals 0b this registers contains "audCTS[19:0]"
generated by the Cycle time counter according to specified timing.
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085147.26971-1-narmstrong@baylibre.com
In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
which attach to the DSI host via mipi_dsi_attach() at probe time, the
ADV7533 bridge device does not. Instead it defers this to the point that
the upstream device connects to its bridge via drm_bridge_attach().
The generic Synopsys MIPI DSI host driver does not register it's own
drm_bridge until the MIPI DSI has attached. But it does not call
drm_bridge_attach() on the downstream device until the upstream device
has attached. This leads to a chicken and the egg failure and the DRM
pipeline does not complete.
Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
the Synopsys MIPI DSI host registers it's bridge such that it is
available for the upstream device to connect to.
Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627151740.2277-1-matt.redfearn@thinci.com
Putting a large drm_connector object on the stack can lead to warnings
in some configuration, such as:
drivers/gpu/drm/selftests/test-drm_cmdline_parser.c:18:12: error: stack frame size of 1040 bytes in function 'drm_cmdline_test_res' [-Werror,-Wframe-larger-than=]
static int drm_cmdline_test_res(void *ignored)
Since the object is never modified, just declare it as 'static const'
and allow this to be passed down.
Fixes: b7ced38916 ("drm/selftests: Add command line parser selftests")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628121712.1928142-1-arnd@arndb.de
Opencode all macros used from the deprecated drm_os_linux.h header file.
The DRM_WAIT_ON used 3 * HZ as timeout.
This was translated to 3000 msec.
The return value of mga_driver_fence_wait() was not
used, so make it return void to simplify code a bit.
v2:
- fixed timeout to 3000 msec (original value was 3 * Hz)
- drop unused return value from mga_driver_fence_wait()
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190623103542.30697-2-sam@ravnborg.org
