32 bit:
- increase alignment from 4 to 8 for .parainstructions
- increase alignment from 4 to 8 for .altinstructions
64 bit:
- move ALIGN() outside output section for .altinstructions
None of the above should result in any functional change.
[ Impact: refactor and unify linker script ]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1240991249-27117-10-git-send-email-sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
32-bit:
- Move definition of __init_begin outside output_section
because it covers more than one section
- Move ALIGN() for end-of-section inside .smp_locks output section.
Same effect but the intent is better documented that
we need both start and end aligned.
64-bit:
- Move ALIGN() outside output section in .init.setup
- Deleted unused __smp_alt_* symbols
None of the above should result in any functional change.
[ Impact: refactor and unify linker script ]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1240991249-27117-9-git-send-email-sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For 64 bit the following functional changes are introduced:
- .data.page_aligned has moved
- .data.cacheline_aligned has moved
- .data.read_mostly has moved
- ALIGN() moved out of output section for .data.cacheline_aligned
- ALIGN() moved out of output section for .data.page_aligned
Notice that 32 bit and 64 bit has different location of _edata.
.data_nosave is 32 bit only as 64 bit is special due to PERCPU.
[ Impact: 32-bit: cleanup, 64-bit: use 32-bit linker script ]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1240991249-27117-7-git-send-email-sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
32 bit x86 had a dedicated .text.head output section,
whereas 64 bit had it all in a single output section.
In the unified version the dedicated .text.head output section
was kept to have full control over the head code.
32 bit:
- Moved definition of _stext to the linker script.
The definition is located _after_ .text.page_aligned as this
is what 32 bit did before.
The ALIGN(8) was introduced so we hit the exact same address
(on the tested config) before and after the move.
I assume that it is a bug that _stext did not cover the
.text.page_aligned section - if this is true it can be fixed
in a follow-up patch (and the ugly ALIGN() can be dropped).
[ Impact: 64-bit: cleanup, 32-bit: use the 64-bit linker script ]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1240991249-27117-5-git-send-email-sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Beautify vmlinux_32.lds.S:
- Use tabs for indent
- Located curly braces like in C code
- Rearranged a few comments
To see actual differences use "git diff -b" which
ignore 'whitespace' changes.
The beautification is done to prepare a unification
of the _32 and _64 variants of the linker scripts.
[ Impact: cleanup ]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1240991249-27117-1-git-send-email-sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The patch adds kernel parameter intel_iommu=pt to set up pass through
mode in context mapping entry. This disables DMAR in linux kernel; but
KVM still runs on VT-d and interrupt remapping still works.
In this mode, kernel uses swiotlb for DMA API functions but other VT-d
functionalities are enabled for KVM. KVM always uses multi level
translation page table in VT-d. By default, pass though mode is disabled
in kernel.
This is useful when people don't want to enable VT-d DMAR in kernel but
still want to use KVM and interrupt remapping for reasons like DMAR
performance concern or debug purpose.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Weidong Han <weidong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Make actual use of the device parameter passed down to
io_apic_set_pci_routing() - to have the IRQ descriptor
on the home node of the device.
If no device has been passed down, we assume it's a platform
device and use the boot node ID for the IRQ descriptor.
[ Impact: optimization, make IO-APIC code more NUMA aware ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F6557E.3080101@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The original feature of migrating irq_desc dynamic was too fragile
and was causing problems: it caused crashes on systems with lots of
cards with MSI-X when user-space irq-balancer was enabled.
We now have new patches that create irq_desc according to device
numa node. This patch removes the leftover bits of the dynamic balancer.
[ Impact: remove dead code ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F654AF.8000808@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We will have systems with 2 and more sockets 8cores/2thread,
but we treat them as multi chassis - while they could have
a stable TSC domain.
Use DMI check instead.
[ Impact: do not turn possibly stable TSCs off incorrectly ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
LKML-Reference: <49F5532A.5000802@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Beautify vmlinux_64.lds.S:
- Use tabs for indent
- Located curly braces like in C code
- Rearranged a few comments
There is no functional changes in this patch
The beautification is done to prepare a unification
of the _32 and the _64 variants of the linker scripts.
[ Impact: cleanup ]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20090426210742.GA3464@uranus.ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, hpet: Stop soliciting hpet=force users on ICH4M
x86: check boundary in setup_node_bootmem()
uv_time: add parameter to uv_read_rtc()
x86: hpet: fix periodic mode programming on AMD 81xx
x86: more than 8 32-bit CPUs requires X86_BIGSMP
x86: avoid theoretical spurious NMI backtraces with CONFIG_CPUMASK_OFFSTACK=y
x86: fix boot crash in NMI watchdog with CONFIG_CPUMASK_OFFSTACK=y and flat APIC
x86-64: fix FPU corruption with signals and preemption
x86/uv: fix for no memory at paddr 0
docs, x86: add nox2apic back to kernel-parameters.txt
x86: mm/numa_32.c calculate_numa_remap_pages should use __init
x86, kbuild: make "make install" not depend on vmlinux
x86/uv: fix init of cpu-less nodes
x86/uv: fix init of memory-less nodes
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/irq: mark NUMA_MIGRATE_IRQ_DESC broken
x86, irq: Remove IRQ_DISABLED check in process context IRQ move
The current mm interface is asymetric. One function allocates a locked
buffer, another function only refunds the memory.
Change this to have two functions for accounting and refunding locked
memory, respectively; and do the actual buffer allocation in ptrace.
[ Impact: refactor BTS buffer allocation code ]
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090424095143.A30265@sedona.ch.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The debug store selftest code uses a stack-allocated buffer, which is
not necessarily correctly aligned.
For tests using a buffer to hold a single entry, the buffer that is
passed to ds_request must already be suitably aligned.
Pass a suitably aligned portion of the bigger buffer.
[ Impact: fix hw-branch-tracer self-test failure ]
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Cc: markus.t.metzger@gmail.com
LKML-Reference: <20090424094309.A30145@sedona.ch.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/ptrace.c
Merge reason: fix the conflict above, and also pick up the CONFIG_BROKEN
dependency change from upstream so that we can remove it
here.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The HPET in the ICH4M is not documented in the data sheet
because it was not officially validated.
While it is fine for hackers to continue to use "hpet=force"
to enable the hardware that they have, it is not prudent to
solicit additional "hpet=force" users on this hardware.
[ Impact: remove hpet=force syslog message on old-ICH systems ]
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <alpine.LFD.2.00.0904231918510.15843@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The earlier patch to change the poller to a separate function subtly
broke the boot logging logic. This could lead to machine checks
getting logged at boot even when disabled or defaulting to off
on some systems. Fix that.
[ Impact: bug fix - avoid spurious MCE in log ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The polling timer while running per CPU still uses a global next_interval
variable, which lead to some CPUs either polling too fast or too slow.
This was not a serious problem because all errors get picked up eventually,
but it's still better to avoid it. Turn next_interval into a per cpu variable.
v2: Fix check_interval == 0 case (Hidetoshi Seto)
[ Impact: minor bug fix ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
uv_read_rtc() is referenced by read member of struct clocksource clocksource_uv.
In include/linux/clocksource.h, read of struct clocksource is declared as:
cycle_t (*read)(struct clocksource *cs)
This got introduced recently in:
8e19608: clocksource: pass clocksource to read() callback
But arch/x86/kernel/uv_time.c was not properly converted by that pach.
This patch adds a dummy parameter (struct clocksource type) to uv_read_rtc() to
fix the incompatible reference in clocksource_uv, and add a NULL parameter in
all places where uv_read_rtc() gets called.
[ Impact: cleanup, address compiler warning ]
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hugh@veritas.com>
LKML-Reference: <49EF3614.1050806@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Dimitri Sivanich <sivanich@sgi.com>
(See http://bugzilla.kernel.org/show_bug.cgi?id=12961)
It partially reverts commit c23e253e67
(x86: hpet: stop HPET_COUNTER when programming periodic mode)
HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL
cleared) to T0_CMP register to set the period in periodic mode.
With this patch HPET_COUNTER is still stopped but not reset when HPET
is programmed in periodic mode. This should help to avoid races when
HPET is programmed in periodic mode and fixes a boot time hang that
I've observed on a machine when using 1000HZ.
[ Impact: fix boot time hang on machines with AMD 81xx chipset ]
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Jeff Mahoney <jeffm@suse.com>
LKML-Reference: <20090421180037.GA2763@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When interrupt-remapping is enabled, we are relying on
setup_IO_APIC_irqs() to configure remapped entries in the
IO-APIC, which comes little bit later after enabling
interrupt-remapping.
Meanwhile, restoration of old io-apic entries after enabling
interrupt-remapping will not make the interrupts through
io-apic functional anyway.
So remove the unnecessary reinit_intr_remapped_IO_APIC() step.
The longer story:
When interrupt-remapping is enabled, IO-APIC entries need to be
setup in the re-mappable format (pointing to
interrupt-remapping table entries setup by the OS). This
remapping configuration is happening in the same place where we
traditionally configure IO-APIC (i.e., in
setup_IO_APIC_irqs()).
So when we enable interrupt-remapping successfully, there is no
need to restore old io-apic RTE entries before we actually do a
complete configuration shortly in setup_IO_APIC_irqs(). Old
IO-APIC RTE's may be in traditional format (non re-mappable) or
in re-mappable format pointing to interrupt-remapping table
entries setup by BIOS. Restoring both of these will not make
IO-APIC functional. We have to rely on setup_IO_APIC_irqs() for
proper configuration by OS.
So I am removing this unnecessary and broken step.
[ Impact: remove unnecessary/broken IO-APIC setup step ]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Weidong Han <weidong.han@intel.com>
Cc: dwmw2@infradead.org
LKML-Reference: <20090420200450.552359000@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pass clocksource pointer to the read() callback for clocksources. This
allows us to share the callback between multiple instances.
[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fcef8576d8 converted backtrace_mask to a
cpumask_var_t, and assumed check_nmi_watchdog was called before
nmi_watchdog_tick was ever called. Steven's oops shows I was wrong.
This is something of a bandaid: I'm not sure we *should* be calling
nmi_watchdog_tick before check_nmi_watchdog. Note that gcc eliminates
this test for the CONFIG_CPUMASK_OFFSTACK=n case.
[ Impact: fix boot crash in rare configs ]
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <alpine.DEB.2.00.0904202113520.10097@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In 64bit signal delivery path, clear_used_math() was happening before saving
the current active FPU state on to the user stack for signal handling. Between
clear_used_math() and the state store on to the user stack, potentially we
can get a page fault for the user address and can block. Infact, while testing
we were hitting the might_fault() in __clear_user() which can do a schedule().
At a later point in time, we will schedule back into this process and
resume the save state (using "xsave/fxsave" instruction) which can lead
to DNA fault. And as used_math was cleared before, we will reinit the FP state
in the DNA fault and continue. This reinit will result in loosing the
FPU state of the process.
Move clear_used_math() to a point after the FPU state has been stored
onto the user stack.
This issue is present from a long time (even before the xsave changes
and the x86 merge). But it can easily be exposed in 2.6.28.x and 2.6.29.x
series because of the __clear_user() in this path, which has an explicit
__cond_resched() leading to a context switch with CONFIG_PREEMPT_VOLUNTARY.
[ Impact: fix FPU state corruption ]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org> [2.6.28.x, 2.6.29.x]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
