The Cubietruck Plus has an HDMI connector tied to the HDMI output of the
SoC.
Enables display output via HDMI on the Cubietruck Plus. The connector
device node is named "hdmi-connector" as there is also a display port
connector, which is tied to the MIPI DSI output of the SoC through a
MIPI-DSI-to-DP bridge. This part is not supported yet.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Remove the num-lanes property to avoid the driver setting the
link width.
On FSL Layerscape SoCs, the number of lanes assigned to PCIe
controller is not fixed, it is determined by the selected SerDes
protocol in the RCW (Reset Configuration Word).
The PCIe link training is completed automatically through the selected
SerDes protocol - the link width set-up is updated by hardware after
power on reset, so the num-lanes property is not needed for Layerscape
PCIe.
The current num-lanes property was added erroneously, which actually
indicates the maximum lanes the PCIe controller can support up to,
instead of the lanes assigned to the PCIe controller. The link width set
by SerDes protocol will be overridden by the num-lanes property, hence
the subsequent re-training will fail when the assigned lanes do not
match the value in the num-lanes property.
Remove the property to fix the issue.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Support for the USB regulator of AB8500 was removed in
commit 41a06aa738 ("regulator: ab8500: Remove USB regulator").
However, the configuration was never removed from the device tree.
It does no longer have any effect, remove it from the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some Ux500 devices use the newer AB8505 PMIC instead of AB8500.
Although they are very similar, there are subtle differences
like the number of regulators or the available GPIO pins.
At the moment, ste-dbx5x0.dtsi always configures the AB8500 PMIC.
To support devices with AB8505, it is necessary to split the
AB8500-specific parts into a separate .dtsi file. Boards can then
select the PMIC by including either ste-ab8500.dtsi or ste-ab8505.dtsi.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Swift contains an eMMC device attached to the second SDHCI controller.
Reviewed-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
In preparation to update to bu21013_tp driver properly annotate GPIOs
property (the INT GPIOs are active low, not open drain), and also define
interrupt lines so we do not have to have special conversion in the driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable support for the ARM Performance Monitor Units in the Cortex-A7
CPU cores on RZ/G1C by adding a device node for the PMU.
New Linux output:
hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
The EVB contains two slots. Enable one of them for testing purposes.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The AST2400 and AST2500 both share the same SD controller, at the same
location in the physical address space and the same hardware interrupt,
with the same clock configurations.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Hook up HSCIF serial devices that are part of the CPG/MSTP Clock Domain
to the SYSC "always-on" PM Domain, for a more consistent
device-power-area description in DT.
Cfr. commit 751e29bbb6 ("ARM: dts: r8a7779: Use SYSC "always-on"
PM Domain").
Fixes: 055d15a88f ("ARM: dts: r8a7779: Add HSCIF0/1 device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Since commit fe2585e9c2 ("doc: dt: mtd: support partitions in a
special 'partitions' subnode") and commit 5cfdedb7b9 ("mtd: ofpart:
move ofpart partitions to a dedicated dt node") the partitioning should
be within a partitions sub-node.
Baseboard device trees following that scheme will get a dtc warning due
to the predefined #address-cells and #size-cells properties:
arch/arm/boot/dts/imx6qdl.dtsi:171.26-189.5: Warning (avoid_unnecessary_addr_size): /soc/gpmi-nand@112000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
I found no upstream imx6 baseboard using the old partitioning scheme, so
we can drop the two properties to avoid such warnings.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the phy-node and mdio bus to the fec-node, represented as is on
hardware.
This commit includes micrel,led-mode that is set to the default
value, prepared for someone who wants to change this.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Prepare FlexCAN use on SODIMM 55/63 178/188. Those SODIMM pins are
compatible for CAN bus use with several modules from the Colibri
family.
Add Better drivestrength and also add flexcan2.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Force HS200 by masking bit 63 of the SDHCI capability register.
The i.MX ESDHC driver uses SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. With
that the stack checks bit 63 to descide whether HS400 is available.
Using sdhci-caps-mask allows to mask bit 63. The stack then selects
HS200 as operating mode.
This prevents rare communication errors with minimal effect on
performance:
sdhci-esdhc-imx 30b60000.usdhc: warning! HS400 strobe DLL
status REF not lock!
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Recent changes to the atheros at803x driver caused
ethernet to stop working on this board.
In particular commit 6d4cd041f0
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e5
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.
This now prevents ethernet from working on this board.
It used to work before those commits, because the
AR8031 comes out of reset with RX delay enabled, and
the at803x driver didn't touch the delay configuration
at all when "rgmii" mode was selected, and because
arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup()
unconditionally enables TX delay.
Since above commits ar8031_phy_fixup() also has no
effect anymore, and the end-result is that all delays
are disabled in the phy, no ethernet.
Update the device tree to restore functionality.
Signed-off-by: André Draszik <git@andred.net>
CC: Ilya Ledvich <ilya@compulab.co.il>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit 1f45e8c6d0.
This 100 ms mystery delay is not on downstream kernels and no longer
seems needed on upstream kernels either [1]. Presumably something in the
meantime has made things better. A few possibilities for patches that
have landed in the meantime that could have made this better are
commit 3157694d8c ("pwm-backlight: Add support for PWM delays
proprieties."), commit 5fb5caee92 ("pwm-backlight: Enable/disable
the PWM before/after LCD enable toggle."), and commit 6d5922dd0d
("ARM: dts: rockchip: set PWM delay backlight settings for Veyron")
Let's revert and get our 100 ms back.
[1] https://lkml.kernel.org/r/2226970.BAPq4liE1j@diego
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[rebased on top of the recent veyron display cleanup]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There might be headless setups of the Compute Module without HDMI,
so better enable HDMI at board level. Btw this allows moving HDMI
base definition into upcoming bcm2835-common.dtsi.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes for omap variants for v5.3-rc cycle
We have another fix to disable voltage switching for am57xx SDIO as
the bootrom cannot handle all the voltages after a reset that thought
I had already sent a pull request for earlier but forgot. And we also
update dra74x iodelay configuration for mmc3 to use the recommended
values.
Then I noticed we had introduced few new boot warnings with the various
recent ti-sysc changes and wanted to fix those. I also noticed we still
have too many warnings to be able to spot the real ones easily and fixed
up few of those. Sure some of the warnings have been around for a long
time and few of the fixes could have waited for the merge window, but
having more usable dmesg log level output is a valuable.
Other fixes are IO size correction for am335x UARTs that cause issues
for at least FreeBSD using the same device tree file that checks that
the child IO range is not larger than the parent has.
For omap1 ams-delta keyboard we need to fix a irq ack that broke with
all the recent gpio changes.
And there are also few static checker warning fixes for recent am335x
PM changes and ti-sysc driver and one switch fall-though update.
* tag 'omap-for-v5.3/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: pm33xx: Make two symbols static
soc: ti: pm33xx: Fix static checker warnings
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: dts: Fix incomplete dts data for am3 and am4 mmc
bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
ARM: dts: dra74x: Fix iodelay configuration for mmc3
ARM: dts: am335x: Fix UARTs length
ARM: OMAP2+: Fix omap4 errata warning on other SoCs
ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
ARM: dts: Fix flags for gpio7
bus: ti-sysc: Fix using configured sysc mask value
bus: ti-sysc: Fix handling of forced idle
ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
ARM: dts: am57xx: Disable voltage switching for SD card
Link: https://lore.kernel.org/r/pull-1565844391-332885@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARMv7 Vexpress DTS updates for v5.4
Couple of updates adding missing: SPDX GPL-2.0 license identifier
and newline at the end of the file
* tag 'vexpress-dt-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: Add missing newline at end of file
ARM: dts: vexpress: add missing SPDX GPL-2.0 license identifier
Link: https://lore.kernel.org/r/20190814172425.26089-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
There are two PSU on i2c11. PSU0's address is 0x58, PSU1's address is
`0x59`, not `0x5a`.
Signed-off-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
DTS updates for the Gemini platform:
- Fix up some pin config confusion
- Use redboot partition parsing on the SL93512r
- Mount root on mtdblock3 by default
* tag 'gemini-dts-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: Mount root from mtdblock3
ARM: dts: gemini: Switch to redboot partition parsing
ARM: dts: gemini: Fix up confused pin settings
Link: https://lore.kernel.org/r/CACRpkdarsQNfXgXMQKfYwOyiqhKY67gKd3ufQ+wexwO3v=LE5w@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT updates for v5.4, round 1
Highlights:
----------
MPU part:
-Add FMC2 NAND controller support on stm32mp157c-ev1.
-Add M4 remoteproc support:
-Add support in stm32mp157c.dtsi.
-Declare copro reserved memories region on stm32mp157 EV1 and DK1
boards.
-Enable M4 copro support on stm32mp157 EV1 and DK1.
-Add booster for ADC on stm32mp157c.
-Add audio codec support on stm32mp157 DK1.
MCU part:
-Remove fixed regulator unit address on stm32429i-eval used by ADC.
-Add missing vdd-supply required by ADC on stm32429i-eval and
stm32h743i-eval.
-Add pwm cells on f746 and f429.
* tag 'stm32-dt-for-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits)
ARM: dts: stm32: remove useless pinctrl entries in stm32mp157-pinctrl
ARM: dts: stm32: add phy-dsi-supply property on stm32mp157c-ev1
ARM: dts: stm32: add audio codec support on stm32mp157a-dk1 board
ARM: dts: stm32: add syscfg to ADC on stm32mp157c
ARM: dts: stm32: add pwm cells to stm32f746
ARM: dts: stm32: add pwm cells to stm32f429
ARM: dts: stm32: add pwm cells to stm32mp157c
ARM: dts: stm32: fix -Wall W=1 compilation in stm32mp157 pinctrl for mcan
ARM: dts: stm32: add booster for ADC analog switches on stm32mp157c
ARM: dts: stm32: enable m4 coprocessor support on STM32MP157a-dk1
ARM: dts: stm32: declare copro reserved memories on STM32MP157a-dk1
ARM: dts: stm32: enable m4 coprocessor support on STM32MP157c-ed1
ARM: dts: stm32: declare copro reserved memories on STM32MP157c-ed1
ARM: dts: stm32: add m4 remoteproc support on STM32MP157c
ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval
ARM: dts: stm32: add missing vdda-supply to adc on stm32429i-eval
ARM: dts: stm32: remove fixed regulator unit address on stm32429i-eval
ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1
ARM: dts: stm32: add FMC2 NAND controller pins muxing on stm32mp157c-ev1
ARM: dts: stm32: add FMC2 NAND controller support on stm32mp157c
...
Link: https://lore.kernel.org/r/482a2a40-a246-6654-7e3b-8e38b137752f@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This are some DTS changes for the Ux500 for the v5.4 kernel cycle:
- Update the CoreSight blocks to use the latest and greatest
bindings
- Push the thermal driver config down to the main SoC DTSI
as it applies to all ASICs.
- Set a pull-up on the ST UIB right.
* tag 'ux500-dts-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500: set pull-up on STUIB STMPE IRQ line
ARM: dts: ux500: Fix up the thermal nodes
ARM: dts: ste: Update coresight DT bindings
Link: https://lore.kernel.org/r/CACRpkdbKX7a15SC-zwxmH_ygGzOKrn0h-pzzm22UpRcLRfRVNA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DRM subsystem graphics drivers require more granular
definition of the connection between display drivers and
panels, and a proper panel compatible. This utilizes the
bindings merged to the DRM subsystem to properly define
the display on the NSPIRE devices.
We also do away with the undocumented DT binding
"lcd-type".
We add both the clocks to the CLCD block so the driver
have full control over its clocking.
Link: https://lore.kernel.org/r/20190810074230.6492-1-linus.walleij@linaro.org
Cc: Daniel Tang <dt.tangr@gmail.com>
Cc: Fabian Vogt <fabian@ritter-vogt.de>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This makes use of the am335x-osd335x-common.dtsi file that contains the
common device tree components for Octavo Systems AM335x System-in-
Package that is used on the BeagleBone Blue.
This has two minor side-effects:
1. pinmux_i2c0_pins is renamed to pinmux-i2c0-pins
2. the 1000MHz cpufreq operating point is enabled
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This allows to remove the console= entry in the kernel command line.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
