Commit 99e98d3fb1 ("cpuidle: Consolidate disabled state checks")
overlooked the fact that the imx6q and tegra20 cpuidle drivers use
the "disabled" field in struct cpuidle_state for quirks which trigger
after the initialization of cpuidle, so reading the initial value of
that field is not sufficient for those drivers.
In order to allow them to implement the quirks without using the
"disabled" field in struct cpuidle_state, introduce a new helper
function and modify them to use it.
Fixes: 99e98d3fb1 ("cpuidle: Consolidate disabled state checks")
Reported-by: Len Brown <lenb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Prevent a NULL pointer dereference in the X2APIC code in case of a
CPU hotplug failure.
- Prevent boot failures on HP superdome machines by invalidating the
level2 kernel pagetable entries outside of the kernel area as
invalid so BIOS reserved space won't be touched unintentionally.
Also ensure that memory holes are rounded up to the next PMD
boundary correctly.
- Enable X2APIC support on Hyper-V to prevent boot failures.
- Set the paravirt name when running on Hyper-V for consistency
- Move a function under the appropriate ifdef guard to prevent build
warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/acpi: Move get_cmdline_acpi_rsdp() under #ifdef guard
x86/hyperv: Set pv_info.name to "Hyper-V"
x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu
x86/hyperv: Make vapic support x2apic mode
x86/boot/64: Round memory hole size up to next PMD page
x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
Pull RISC-V fixes from Paul Walmsley:
"Some RISC-V fixes:
- Fix the virtual memory layout so the fixaddr region doesn't overlap
with other regions. (This was originally intended to go in as part
of an earlier patch, but I inadvertently dropped it during a
rebase)
- Add the DT chosen/stdout-path property to the HiFive Unleashed DT
file. This is so "earlycon" can be specified with no arguments on
the kernel command line, and the correct UART will be automatically
selected.
And two cleanup patches:
- Simplify the code in our breakpoint trap handler.
- Drop a comment in our TLB flush code that has caused some
confusion"
* tag 'riscv/for-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: fix virtual address overlapped in FIXADDR_START and VMEMMAP_START
riscv: tlbflush: remove confusing comment on local_flush_tlb_all()
riscv: dts: HiFive Unleashed: add default chosen/stdout-path
riscv: remove the switch statement in do_trap_break()
When building with "EXTRA_CFLAGS=-Wall" gcc warns:
arch/x86/boot/compressed/acpi.c:29:30: warning: get_cmdline_acpi_rsdp defined but not used [-Wunused-function]
get_cmdline_acpi_rsdp() is only used when CONFIG_RANDOMIZE_BASE and
CONFIG_MEMORY_HOTREMOVE are both enabled, so any build where one of these
config options is disabled has this issue.
Move the function under the same ifdef guard as the call site.
[ tglx: Add context to the changelog so it becomes useful ]
Fixes: 41fa1ee9c6 ("acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1569719633-32164-1-git-send-email-zhenzhong.duan@oracle.com
Pull arm64 fixes from Will Deacon:
"The main thing here is a long-awaited workaround for a CPU erratum on
ThunderX2 which we have developed in conjunction with engineers from
Cavium/Marvell.
At the moment, the workaround is unconditionally enabled for affected
CPUs at runtime but we may add a command-line option to disable it in
future if performance numbers show up indicating a significant cost
for real workloads.
Summary:
- Work around Cavium/Marvell ThunderX2 erratum #219
- Fix regression in mlock() ABI caused by sign-extension of TTBR1 addresses
- More fixes to the spurious kernel fault detection logic
- Fix pathological preemption race when enabling some CPU features at boot
- Drop broken kcore macros in favour of generic implementations
- Fix userspace view of ID_AA64ZFR0_EL1 when SVE is disabled
- Avoid NULL dereference on allocation failure during hibernation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tags: Preserve tags for addresses translated via TTBR1
arm64: mm: fix inverted PAR_EL1.F check
arm64: sysreg: fix incorrect definition of SYS_PAR_EL1_F
arm64: entry.S: Do not preempt from IRQ before all cpufeatures are enabled
arm64: hibernate: check pgd table allocation
arm64: cpufeature: Treat ID_AA64ZFR0_EL1 as RAZ when SVE is not enabled
arm64: Fix kcore macros after 52-bit virtual addressing fallout
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
Pull Xtensa fixes from Max Filippov:
- fix {get,put}_user() for 64bit values
- fix warning about static EXPORT_SYMBOL from modpost
- fix PCI IO ports mapping for the virt board
- fix pasto in change_bit for exclusive access option
* tag 'xtensa-20191017' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix change_bit in exclusive access option
xtensa: virt: fix PCI IO ports mapping
xtensa: drop EXPORT_SYMBOL for outs*/ins*
xtensa: fix type conversion in __get_user_[no]check
xtensa: clean up assembly arguments in uaccess macros
xtensa: fix {get,put}_user() for 64bit values
Workaround for Cavium/Marvell ThunderX2 erratum #219.
* errata/tx2-219:
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
Sign-extending TTBR1 addresses when converting to an untagged address
breaks the documented POSIX semantics for mlock() in some obscure error
cases where we end up returning -EINVAL instead of -ENOMEM as a direct
result of rewriting the upper address bits.
Rework the untagged_addr() macro to preserve the upper address bits for
TTBR1 addresses and only clear the tag bits for user addresses. This
matches the behaviour of the 'clear_address_tag' assembly macro, so
rename that and align the implementations at the same time so that they
use the same instruction sequences for the tag manipulation.
Link: https://lore.kernel.org/stable/20191014162651.GF19200@arrakis.emea.arm.com/
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
When detecting a spurious EL1 translation fault, we have the CPU retry
the translation using an AT S1E1R instruction, and inspect PAR_EL1 to
determine if the fault was spurious.
When PAR_EL1.F == 0, the AT instruction successfully translated the
address without a fault, which implies the original fault was spurious.
However, in this case we return false and treat the original fault as if
it was not spurious.
Invert the return value so that we treat such a case as spurious.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 42f91093b0 ("arm64: mm: Ignore spurious translation faults taken from the kernel")
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The 'F' field of the PAR_EL1 register lives in bit 0, not bit 1.
Fix the broken definition in 'sysreg.h'.
Fixes: e8620cff99 ("arm64: sysreg: Add some field definitions for PAR_EL1")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Preempting from IRQ-return means that the task has its PSTATE saved
on the stack, which will get restored when the task is resumed and does
the actual IRQ return.
However, enabling some CPU features requires modifying the PSTATE. This
means that, if a task was scheduled out during an IRQ-return before all
CPU features are enabled, the task might restore a PSTATE that does not
include the feature enablement changes once scheduled back in.
* Task 1:
PAN == 0 ---| |---------------
| |<- return from IRQ, PSTATE.PAN = 0
| <- IRQ |
+--------+ <- preempt() +--
^
|
reschedule Task 1, PSTATE.PAN == 1
* Init:
--------------------+------------------------
^
|
enable_cpu_features
set PSTATE.PAN on all CPUs
Worse than this, since PSTATE is untouched when task switching is done,
a task missing the new bits in PSTATE might affect another task, if both
do direct calls to schedule() (outside of IRQ/exception contexts).
Fix this by preventing preemption on IRQ-return until features are
enabled on all CPUs.
This way the only PSTATE values that are saved on the stack are from
synchronous exceptions. These are expected to be fatal this early, the
exception is BRK for WARN_ON(), but as this uses do_debug_exception()
which keeps IRQs masked, it shouldn't call schedule().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
[james: Replaced a really cool hack, with an even simpler static key in C.
expanded commit message with Julien's cover-letter ascii art]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
change_bit implementation for XCHAL_HAVE_EXCLUSIVE case changes all bits
except the one required due to copy-paste error from clear_bit.
Cc: stable@vger.kernel.org # v5.2+
Fixes: f7c34874f0 ("xtensa: add exclusive atomics support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This patch fixes the virtual address layout in pgtable.h. The virtual
address of FIXADDR_START and VMEMMAP_START should not be overlapped.
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: fixed patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
* Removes mediatek,physpeed property from dtsi that is useless in PHYLINK
* Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
* Set gmac1 to gmii mode that connect to a internal gphy
Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virt device tree incorrectly uses 0xf0000000 on both sides of PCI IO
ports address space mapping. This results in incorrect port address
assignment in PCI IO BARs and subsequent crash on attempt to access
them. Use 0 as base address in PCI IO ports address space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
HAVE_FAST_GUP enables the lockless quick page table walker for simple
cases, and is a nice optimization for some random loads that can then
use get_user_pages_fast() rather than the more careful page walker.
However, for some unexplained reason, it seems to be subtly broken on
sparc64. The breakage is only with some compiler versions and some
hardware, and nobody seems to have figured out what triggers it,
although there's a simple reprodicer for the problem when it does
trigger.
The problem was introduced with the conversion to the generic GUP code
in commit 7b9afb86b6 ("sparc64: use the generic get_user_pages_fast
code"), but nothing looks obviously wrong in that conversion. It may be
a compiler bug that just hits us with the code reorganization. Or it
may be something very specific to sparc64.
This disables HAVE_FAST_GUP entirely. That makes things like futexes a
bit slower, but at least they work. If we can figure out the trigger,
that would be lovely, but it's been three months already..
Link: https://lore.kernel.org/lkml/20190717215956.GA30369@altlinux.org/
Fixes: 7b9afb86b6 ("sparc64: use the generic get_user_pages_fast code")
Reported-by: Dmitry V Levin <ldv@altlinux.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Requested-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull parisc fixes from Helge Deller:
- Fix a parisc-specific fallout of Christoph's
dma_set_mask_and_coherent() patches (Sven)
- Fix a vmap memory leak in ioremap()/ioremap() (Helge)
- Some minor cleanups and documentation updates (Nick, Helge)
* 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove 32-bit DMA enforcement from sba_iommu
parisc: Fix vmap memory leak in ioremap()/iounmap()
parisc: prefer __section from compiler_attributes.h
parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define
MAINTAINERS: Add hp_sdc drivers to parisc arch
Check that the per-cpu cluster mask pointer has been set prior to
clearing a dying cpu's bit. The per-cpu pointer is not set until the
target cpu reaches smp_callin() during CPUHP_BRINGUP_CPU, whereas the
teardown function, x2apic_dead_cpu(), is associated with the earlier
CPUHP_X2APIC_PREPARE. If an error occurs before the cpu is awakened,
e.g. if do_boot_cpu() itself fails, x2apic_dead_cpu() will dereference
the NULL pointer and cause a panic.
smpboot: do_boot_cpu failed(-22) to wakeup CPU#1
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:x2apic_dead_cpu+0x1a/0x30
Call Trace:
cpuhp_invoke_callback+0x9a/0x580
_cpu_up+0x10d/0x140
do_cpu_up+0x69/0xb0
smp_init+0x63/0xa9
kernel_init_freeable+0xd7/0x229
? rest_init+0xa0/0xa0
kernel_init+0xa/0x100
ret_from_fork+0x35/0x40
Fixes: 023a611748 ("x86/apic/x2apic: Simplify cluster management")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191001205019.5789-1-sean.j.christopherson@intel.com
Now that there's Hyper-V IOMMU driver, Linux can switch to x2apic mode
when supported by the vcpus.
However, the apic access functions for Hyper-V enlightened apic assume
xapic mode only.
As a result, Linux fails to bring up secondary cpus when run as a guest
in QEMU/KVM with both hv_apic and x2apic enabled.
According to Michael Kelley, when in x2apic mode, the Hyper-V synthetic
apic MSRs behave exactly the same as the corresponding architectural
x2apic MSRs, so there's no need to override the apic accessors. The
only exception is hv_apic_eoi_write, which benefits from lazy EOI when
available; however, its implementation works for both xapic and x2apic
modes.
Fixes: 29217a4746 ("iommu/hyper-v: Add Hyper-V stub IOMMU driver")
Fixes: 6b48cb5f83 ("X86/Hyper-V: Enlighten APIC access")
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191010123258.16919-1-rkagan@virtuozzo.com
There is a bug in create_safe_exec_page(), when page table is allocated
it is not checked that table is allocated successfully:
But it is dereferenced in: pgd_none(READ_ONCE(*pgdp)). Check that
allocation was successful.
Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Will Deacon <will@kernel.org>
If CONFIG_ARM64_SVE=n then we fail to report ID_AA64ZFR0_EL1 as 0 when
read by userspace, despite being required by the architecture. Although
this is theoretically a change in ABI, userspace will first check for
the presence of SVE via the HWCAP or the ID_AA64PFR0_EL1.SVE field
before probing the ID_AA64ZFR0_EL1 register. Given that these are
reported correctly for this configuration, we can safely tighten up the
current behaviour.
Ensure ID_AA64ZFR0_EL1 is treated as RAZ when CONFIG_ARM64_SVE=n.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Fixes: 06a916feca ("arm64: Expose SVE2 features for userspace")
Signed-off-by: Will Deacon <will@kernel.org>
Custom outs*/ins* implementations are long gone from the xtensa port,
remove matching EXPORT_SYMBOLs.
This fixes the following build warnings issued by modpost since commit
15bfc2348d ("modpost: check for static EXPORT_SYMBOL* functions"):
WARNING: "insb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insl" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsl" [vmlinux] is a static EXPORT_SYMBOL
Cc: stable@vger.kernel.org
Fixes: d38efc1f15 ("xtensa: adopt generic io routines")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
__get_user_[no]check uses temporary buffer of type long to store result
of __get_user_size and do sign extension on it when necessary. This
doesn't work correctly for 64-bit data. Fix it by moving temporary
buffer/sign extension logic to __get_user_asm.
Don't do assignment of __get_user_bad result to (x) as it may not always
be integer-compatible now and issue warning even when it's going to be
optimized. Instead do (x) = 0; and call __get_user_bad separately.
Zero initialize __x in __get_user_asm and use '+' constraint for its
assembly argument, so that its value is preserved in error cases. This
may add at most 1 cycle to the fast path, but saves an instruction and
two padding bytes in the fixup section for each use of this macro and
works for both misaligned store and store exception.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Numeric assembly arguments are hard to understand and assembly code that
uses them is hard to modify. Use named arguments in __check_align_*,
__get_user_asm and __put_user_asm. Modify macro parameter names so that
they don't affect argument names. Use '+' constraint for the [err]
argument instead of having it as both input and output.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Sven noticed that calling ioremap() and iounmap() multiple times leads
to a vmap memory leak:
vmap allocation for size 4198400 failed:
use vmalloc=<size> to increase size
It seems we missed calling vunmap() in iounmap().
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org> # v3.16+
Remove a confusing comment on our local_flush_tlb_all()
implementation. Per an internal discussion with Andrew, while it's
true that the fence.i is not necessary, it's not the case that an
sfence.vma implies a fence.i. We also drop the section about
"flush[ing] the entire local TLB" to better align with the language in
section 4.2.1 "Supervisor Memory-Management Fence Instruction" of the
RISC-V Privileged Specification v20190608.
Fixes: c901e45a99 ("RISC-V: `sfence.vma` orderes the instruction cache")
Reported-by: Alan Kao <alankao@andestech.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Add a default "stdout-path" to the kernel DTS file, as is present in many
of the board DTS files elsewhere in the kernel tree. With this line
present, earlyconsole can be enabled by simply passing "earlycon" on the
kernel command line. No specific device details are necessary, since the
kernel will use the stdout-path as the default.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
First of all, on short copies __copy_{to,from}_user() return the amount
of bytes left uncopied, *not* -EFAULT. get_user() and put_user() are
expected to return -EFAULT on failure.
Another problem is get_user(v32, (__u64 __user *)p); that should
fetch 64bit value and the assign it to v32, truncating it in process.
Current code, OTOH, reads 8 bytes of data and stores them at the
address of v32, stomping on the 4 bytes that follow v32 itself.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Pull USB fixes from Greg KH:
"Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for
years as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues"
* tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
USB: yurex: fix NULL-derefs on disconnect
USB: iowarrior: use pr_err()
USB: iowarrior: drop redundant iowarrior mutex
USB: iowarrior: drop redundant disconnect mutex
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: chaoskey: fix use-after-free on release
USB: adutux: fix use-after-free on release
USB: ldusb: fix NULL-derefs on driver unbind
USB: legousbtower: fix use-after-free on release
usb: cdns3: Fix for incorrect DMA mask.
usb: cdns3: fix cdns3_core_init_role()
usb: cdns3: gadget: Fix full-speed mode
USB: usb-skeleton: drop redundant in-urb check
USB: usb-skeleton: fix use-after-free after driver unbind
USB: usb-skeleton: fix NULL-deref on disconnect
usb:cdns3: Fix for CV CH9 running with g_zero driver.
usb: dwc3: Remove dev_err() on platform_get_irq() failure
usb: dwc3: Switch to platform_get_irq_byname_optional()
...
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also a couple of updates for new Intel
models (which are technically hw-enablement, but to users it's a fix
to perf behavior on those new CPUs - hope this is fine), an AUX
inheritance fix, event time-sharing fix, and a fix for lost non-perf
NMI events on AMD systems"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf/x86/cstate: Add Tiger Lake CPU support
perf/x86/msr: Add Tiger Lake CPU support
perf/x86/intel: Add Tiger Lake CPU support
perf/x86/cstate: Update C-state counters for Ice Lake
perf/x86/msr: Add new CPU model numbers for Ice Lake
perf/x86/cstate: Add Comet Lake CPU support
perf/x86/msr: Add Comet Lake CPU support
perf/x86/intel: Add Comet Lake CPU support
perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp
perf/core: Fix corner case in perf_rotate_context()
perf/core: Rework memory accounting in perf_mmap()
perf/core: Fix inheritance of aux_output groups
perf annotate: Don't return -1 for error when doing BPF disassembly
perf annotate: Return appropriate error code for allocation failures
perf annotate: Fix arch specific ->init() failure errors
perf annotate: Propagate the symbol__annotate() error return
perf annotate: Fix the signedness of failure returns
perf annotate: Propagate perf_env__arch() error
perf evsel: Fall back to global 'perf_env' in perf_evsel__env()
perf tools: Propagate get_cpuid() error
...
Pull EFI fixes from Ingo Molnar:
"Misc EFI fixes all across the map: CPER error report fixes, fixes to
TPM event log parsing, fix for a kexec hang, a Sparse fix and other
fixes"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/tpm: Fix sanity check of unsigned tbl_size being less than zero
efi/x86: Do not clean dummy variable in kexec path
efi: Make unexported efi_rci2_sysfs_init() static
efi/tpm: Only set 'efi_tpm_final_log_size' after successful event log parsing
efi/tpm: Don't traverse an event log with no events
efi/tpm: Don't access event->count when it isn't mapped
efivar/ssdt: Don't iterate over EFI vars if no SSDT override was specified
efi/cper: Fix endianness of PCIe class code
Pull x86 fixes from Ingo Molnar:
"A handful of fixes: a kexec linking fix, an AMD MWAITX fix, a vmware
guest support fix when built under Clang, and new CPU model number
definitions"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Comet Lake to the Intel CPU models header
lib/string: Make memzero_explicit() inline instead of external
x86/cpu/vmware: Use the full form of INL in VMWARE_PORT
x86/asm: Fix MWAITX C-state hint value
Pull x86 license tag fixlets from Ingo Molnar:
"Fix a couple of SPDX tags in x86 headers to follow the canonical
pattern"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Use the correct SPDX License Identifier in headers
Pull RISC-V fixes from Paul Walmsley:
- Fix several bugs in the breakpoint trap handler
- Drop an unnecessary loop around calls to preempt_schedule_irq()
* tag 'riscv/for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: entry: Remove unneeded need_resched() loop
riscv: Correct the handling of unexpected ebreak in do_trap_break()
riscv: avoid sending a SIGTRAP to a user thread trapped in WARN()
riscv: avoid kernel hangs when trapped in BUG()
Pull MIPS fixes from Paul Burton:
- Build fixes for CONFIG_OPTIMIZE_INLINING=y builds in which the
compiler may choose not to inline __xchg() & __cmpxchg().
- A build fix for Loongson configurations with GCC 9.x.
- Expose some extra HWCAP bits to indicate support for various
instruction set extensions to userland.
- Fix bad stack access in firmware handling code for old SNI
RM200/300/400 machines.
* tag 'mips_fixes_5.4_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Disable Loongson MMI instructions for kernel build
MIPS: elf_hwcap: Export userspace ASEs
MIPS: fw: sni: Fix out of bounds init of o32 stack
MIPS: include: Mark __xchg as __always_inline
MIPS: include: Mark __cmpxchg as __always_inline
Pull powerpc fixes from Michael Ellerman:
"Fix a kernel crash in spufs_create_root() on Cell machines, since the
new mount API went in.
Fix a regression in our KVM code caused by our recent PCR changes.
Avoid a warning message about a failing hypervisor API on systems that
don't have that API.
A couple of minor build fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Desnes A. Nunes do
Rosario, Emmanuel Nicolet, Jordan Niethe, Laurent Dufour, Stephen
Rothwell"
* tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
spufs: fix a crash in spufs_create_root()
powerpc/kvm: Fix kvmppc_vcore->in_guest value in kvmhv_switch_to_host
selftests/powerpc: Fix compile error on tlbie_test due to newer gcc
powerpc/pseries: Remove confusing warning message.
powerpc/64s/radix: Fix build failure with RADIX_MMU=n
Pull xen fixes from Juergen Gross:
- correct panic handling when running as a Xen guest
- cleanup the Xen grant driver to remove printing a pointer being
always NULL
- remove a soon to be wrong call of of_dma_configure()
* tag 'for-linus-5.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Stop abusing DT of_dma_configure API
xen/grant-table: remove unnecessary printing
x86/xen: Return from panic notifier
Comet Lake is the new 10th Gen Intel processor. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Kaby Lake.
Share hswult_cstates with Kaby Lake.
Update the comments for Comet Lake.
Kaby Lake is missed in the comments for some Residency Counters. Update
the comments for Kaby Lake as well.
The External Design Specification (EDS) is not published yet. It comes
from an authoritative internal source.
The patch has been tested on real hardware.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
