There is one issue relates to Coarse Power Gating(CPG) on KBL NUC in GVT-g,
vgpu can't get the correct default context by updating the registers before
inhibit context submission. It always get back the hardware default value
unless the inhibit context submission happened before the 1st time
forcewake put. With this wrong default context, vgpu will run with
incorrect state and meet unknown issues.
The solution is initialize these mmios by adding lri command in ring buffer
of the inhibit context, then gpu hardware has no chance to go down RC6 when
lri commands are right being executed, and then vgpu can get correct
default context for further use.
v3:
- fix code fault, use 'for' to loop through mmio render list(Zhenyu)
v4:
- save the count of engine mmio need to be restored for inhibit context and
refine some comments. (Kevin)
v5:
- code rebase
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
No functional change. This defination will also be used in future patchesi.
v4:
- refine patch description (Kevin)
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We don't know how many page tables will be shadowed. It varies
considerably corresponding to guest load. Radix tree is a better
choice for us. Since Page Frame Number is used as key so most of
the bits are common.
Here is some performance data (duration in us) of looking up a
element:
Before: (aka. ppgtt_find_shadow_page)
0.308 0.292 0.246 0.432 0.143 ... 0.311 0.225 0.382 0.199 0.325
After: (aka. intel_vgpu_find_spt_by_mfn)
0.106 0.106 0.107 0.106 0.105 0.107 ... 0.107 0.109 0.105 0.108
This time I didn't get the early data of hash table. The data is
measured when desktop is shown.
As last change, the overall benchmark almost is not changed, but
we get better scalability.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch provide generic page_track infrastructure for write-protected
guest page. The old page_track logic gets rewrote and now stays in a new
standalone page_track.c. This page track infrastructure can be both used
by vGUC and GTT shadowing.
The important change is that it uses radix tree instead of hash table.
We don't have a predictable number of pages that will be tracked.
Here is some performance data (duration in us) of looking up a element:
Before: (aka. intel_vgpu_find_tracked_page)
0.091 0.089 0.090 ... 0.093 0.091 0.087 ... 0.292 0.285 0.292 0.291
After: (aka. intel_vgpu_find_page_track)
0.104 0.105 0.100 0.102 0.102 0.100 ... 0.101 0.101 0.105 0.105
The hash table has good performance at beginning, but turns bad with
more pages being tracked even no 3D applications are running. As
expected, radix tree has stable duration and very quick.
The overall benchmark (tested with Heaven Benchmark) marginally improved
since this is not the bottleneck. What we benefit more from this change
is scalability.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Don't extend page_track to mpt layer. Keep MPT simple and clean.
Meanwhile remove gtt.n_tracked_guest_page which doesn't make much
sense.
v2: clean up gtt.n_tracked_guest_page.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The kvmgt's implementation of mpt api {set,unset}_wp_page is not real
write-protection - the data get written before invoke this two api.
As discussed, change the mpt api to match the real behavior.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The target structure of some functions is struct intel_vgpu_ppgtt_spt and
their names are xxx_shadow_page. It should be xxx_shadow_page_table. Let's
use short name 'spt' instead to reduce the length. As well as the hash
table name.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is a another big one and the GVT shadow page management code is
heavily refined.
The new code only use struct intel_vgpu_ppgtt_spt to represent a vgpu
shadow page table - w/ or wo/ a guest page associated with. A pure shadow
page (no guest page associated) will be used to shadow splited 2M huge
gtt. In this case, the spt.guest_page.gfn should be a zero.
To search a existed shadow page table, we have two new interfaces:
- intel_vgpu_find_spt_by_gfn(), find a spt by guest gfn. It must not
be a pure spt.
- intel_vgpu_find_spt_by_mfn, Find the spt using shadow page mfn in
shadowed PTE.
The oos_page management is remained as what is was.
v2: Split some changes into small standalone patches.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Make the shadow PTE population code clear. Later we will add huge gtt
support based on this.
v2:
- rebase to latest code.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Factor out these two interfaces so we can kill some duplicated code in
scheduler.c.
v2:
- rename to intel_vgpu_{get,put}_ppgtt_mm
- refine handle_g2v_notification
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This add a new macro gvt_vdbg_mm() to print more verbose logs for
gtt shadowing. The added verbose logs are very useful for debugging.
gvt_vdbg_mm() only comes into effect if VERBOSE_DEBUG is defined by
the developer.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Separate ggtt and ppgtt since they are different. A little more code but
straightforward.
And move these helpers to gtt.c since that is the only client.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
If we manage an object with a reference count, then its life cycle
must flow the reference count operations. Meanwhile, change the
operation functions to generic name *put* and *get*.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is a big one and the GVT shadow graphic memory management code is
heavily refined. The new code is more straightforward with less code.
The struct intel_vgpu_mm is restructured to be clearly defined, use
accurate names and some of the original fields are removed which are
really redundant.
Now we only manage ppgtt mm object with mm->ppgtt_mm.lru_list. No need
to mix ppgtt and ggtt together, since one vGPU only has one ggtt object.
v4: Don't invoke ppgtt_free_all_shadow_page before intel_vgpu_destroy_all_ppgtt_mm.
v3: Add GVT_RING_CTX_NR_PDPS to avoid confusing about the PDPs.
v2: Split some changes into small standalone patches.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Platforms before Gen11 were sharing lanes between port-A & port-E.
This limitation is no more there.
Changes since V1:
- optimize the code (Shashank/Jani)
- create helper function to get max lanes (ville)
Changes since V2:
- Include BIOS fail fix-up in same helper function (ville)
Changes since V3:
- remove confusing if/else (jani)
- group intel_encoder initialization
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206060855.30026-1-mahesh1.kumar@intel.com
Enabling FBC on a plane having a Y-offset that isn't divisible by 4 may
cause pipe FIFO underruns and flickers, so disable FBC on such a config.
I tried the followings to work around the issue:
- enable each HW work around in ILK_DPFC_CHICKEN
- disable each compression algorithm in ILK_DPFC_CONTROL
- disable low-power watermarks
None of the above got rid of the problem. I haven't found this issue in
the Bspec/WA database either.
Besides the igt testcase below (yet to be merged) an easy way to
reproduce the issue is to enable a plane with FBC and a plane Y-offset
not aligned to 4 and then just enable/disable FBC in a loop, keeping the
plane enabled.
I could trigger the problem on BXT/GLK/SKL/CNL, so assume for now that it's
only present on GEN9 and GEN10.
v2: (Ville)
- Run the test/apply the WA on CNL as well.
- Use IS_GEN() instead of INTEL_GEN().
- Fix spelling.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Testcase: igt/kms_plane/plane-clipping-pipe-A-planes
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301134457.13974-1-imre.deak@intel.com
Turns out the VLV/CHV fixed function sprite CSC expects full range
data as input. We've been feeding it limited range data to it all
along. To expand the data out to full range we'll use the color
correction registers (brightness, contrast, and saturation).
On CHV pipe B we were actually doing the right thing already because we
progammed the custom CSC matrix to do expect limited range input. Now
that well pre-expand the data out with the color correction unit, we
need to change the CSC matrix to operate with full range input instead.
This should make the sprite output of the other pipes match the sprite
output of pipe B reasonably well. Looking at the resulting pipe CRCs,
there can be a slight difference in the output, but as I don't know
the formula used by the fixed function CSC of the other pipes, I don't
think it's worth the effort to try to match the output exactly. It
might not even be possible due to difference in internal precision etc.
One slight caveat here is that the color correction registers are single
bufferred, so we should really be updating them during vblank, but we
still don't have a mechanism for that, so just toss in another FIXME.
v2: Rebase
v3: s/bri/brightness/ s/con/contrast/ (Shashank)
v4: Clarify the constants and math (Shashank)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: "Tang, Jun" <jun.tang@intel.com>
Reported-by: "Tang, Jun" <jun.tang@intel.com>
Cc: stable@vger.kernel.org
Fixes: 7f1f3851fe ("drm/i915: sprite support for ValleyView v4")
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-5-ville.syrjala@linux.intel.com
v2: Rebase.
v3:
* Remove DPF, it has been removed from SKL+.
* Fix -internal rebase wrt. execlists interrupt handling.
v4: Rebase.
v5:
* Updated for POR changes. (Daniele Ceraolo Spurio)
* Merged with irq handling fixes by Daniele Ceraolo Spurio:
* Simplify the code by using gen8_cs_irq_handler.
* Fix interrupt handling for the upstream kernel.
v6:
* Remove early bringup debug messages (Tvrtko)
* Add NB about arbitrary spin wait timeout (Tvrtko)
v7 (from Paulo):
* Don't try to write RO bits to registers.
* Don't check for PCH types that don't exist. PCH interrupts are not
here yet.
v9:
* squashed in selector and shared register handling (Daniele)
* skip writing of irq if data is not valid (Daniele)
* use time_after32 (Chris)
* use I915_MAX_VCS and I915_MAX_VECS (Daniele)
* remove fake pm interrupt handling for later patch (Mika)
v10:
* Direct processing of banks. clear banks early (Chris)
* remove poll on valid bit, only clear valid bit (Mika)
* use raw accessors, better naming (Chris)
v11:
* adapt to raw_reg_[read|write]
* bring back polling the valid bit (Daniele)
v12:
* continue if unset intr_dw (Daniele)
* comment the usage of gen8_de_irq_handler bits (Daniele)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-2-mika.kuoppala@linux.intel.com
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Driver Changes:
- Lift alpha_support protection from Cannonlake (Rodrigo)
* Meaning the driver should mostly work for the hardware we had
at our disposal when testing
* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)
- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)
- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)
* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20180221
drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
drm/i915: Move the policy for placement of the GGTT vma into the caller
drm/i915: Also check view->type for a normal GGTT view
drm/i915: Drop WaDoubleCursorLP3Latency:ivb
drm/i915: Set the primary plane pipe select bits on gen4
drm/i915: Don't set cursor pipe select bits on g4x+
drm/i915: Assert that we don't overflow frontbuffer tracking bits
drm/i915: Track number of pending freed objects
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
drm/i915: Clear the in-use marker on execbuf failure
drm/i915: Prune gen8_gt_irq_handler
drm/i915: Track GT interrupt handling using the master iir
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
drm/i915: Release connector iterator on a digital port conflict.
drm/i915/execlists: Remove too early assert
drm/i915: Assert that we always complete a submission to guc/execlists
drm: move read_domains and write_domain into i915
...
