Add a simple helper to chroot with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_chroot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to chdir with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_chdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to rmdir with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_rmdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to unlink with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_unlink.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like ksys_umount, but takes a kernel pointer for the destination path.
Switch over the umount in the init code, which just happen to work due to
the implicit set_fs(KERNEL_DS) during early init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like do_mount, but takes a kernel pointer for the destination path.
Switch over the mounts in the init code and devtmpfs to it, which
just happen to work due to the implicit set_fs(KERNEL_DS) during early
init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This mirrors do_unlinkat and will make life a little easier for
the init code to reuse the whole function with a kernel filename.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rename utimes_common to vfs_utimes and make it available outside of
utimes.c. This will be used by the initramfs unpacking code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no good reason to mess with file descriptors from in-kernel
code, switch the initrd loading to struct file based read and writes
instead.
Also Pass an explicit offset instead of ->f_pos, and to make that easier,
use file scope file structs and offsets everywhere except for
identify_ramdisk_image instead of the current strange mix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the special handling for multiple floppies in the initrd code.
No one should be using floppies for booting these days. (famous last
words..)
Includes a spelling fix from Colin Ian King <colin.king@canonical.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Just like the NFS and CIFS root code this better lives with the
driver it is tightly integrated with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a helper for struct file based chmode operations. To be used by
the initramfs code soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a helper for struct file based chown operations. To be used by
the initramfs code soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull input fixes from Dmitry Torokhov:
"A few quirks for the Elan touchpad driver, another Thinkpad is being
switched over from PS/2 to native RMI4 interface, and we gave a brand
new SW_MACHINE_COVER switch definition"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add more hardware ID for Lenovo laptops
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
Revert "Input: elants_i2c - report resolution information for touch major"
Input: elan_i2c - only increment wakeup count on touch
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
ARM: dts: n900: remove mmc1 card detect gpio
Input: add `SW_MACHINE_COVER`
Pull RISC-V fixes from Palmer Dabbelt:
"I have a few KGDB-related fixes. They're mostly fixes for build
warnings, but there's also:
- Support for the qSupported and qXfer packets, which are necessary
to pass around GDB XML information which we need for the RISC-V GDB
port to fully function.
- Users can now select STRICT_KERNEL_RWX instead of forcing it on"
* tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning
kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h
riscv: Fix "no previous prototype" compile warning in kgdb.c file
riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX
kgdb: enable arch to support XML packet.
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
Saeed Mahameed says:
====================
mlx5 fixes 2020-07-02
This series introduces some fixes to mlx5 driver.
V1->v2:
- Drop "ip -s" patch and mirred device hold reference patch.
- Will revise them in a later submission.
Please pull and let me know if there is any problem.
For -stable v5.2
('net/mlx5: Fix eeprom support for SFP module')
For -stable v5.4
('net/mlx5e: Fix 50G per lane indication')
For -stable v5.5
('net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash')
('net/mlx5e: Fix VXLAN configuration restore after function reload')
For -stable v5.7
('net/mlx5e: CT: Fix memory leak in cleanup')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull in-kernel read and write op cleanups from Christoph Hellwig:
"Cleanup in-kernel read and write operations
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
The new WARN_ONs in combination with syzcaller already found a missing
input validation in 9p. The fix should be on your way through the
maintainer ASAP".
[ This is prep-work for the real changes coming 5.9 ]
* tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc:
fs: remove __vfs_read
fs: implement kernel_read using __kernel_read
integrity/ima: switch to using __kernel_read
fs: add a __kernel_read helper
fs: remove __vfs_write
fs: implement kernel_write using __kernel_write
fs: check FMODE_WRITE in __kernel_write
fs: unexport __kernel_write
bpfilter: switch to kernel_write
autofs: switch to kernel_write
cachefiles: switch to kernel_write
Pull dma-mapping fixes from Christoph Hellwig:
- add a warning when the atomic pool is depleted (David Rientjes)
- protect the parameters of the new scatterlist helper macros (Marek
Szyprowski )
* tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping:
scatterlist: protect parameters of the sg_table related macros
dma-mapping: warn when coherent pool is depleted
Pull gfs2 fixes from Andreas Gruenbacher:
"Fix gfs2 readahead deadlocks by adding a IOCB_NOIO flag that allows
gfs2 to use the generic fiel read iterator functions without having to
worry about being called back while holding locks".
* tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Rework read and page fault locking
fs: Add IOCB_NOIO flag for generic_file_read_iter
Currently, only riscv kgdb.c uses the kgdb_has_hit_break() to identify
the kgdb breakpoint. It causes other architectures will encounter the "no
previous prototype" warnings if the compile option has W=1. Moving the
declaration of extern kgdb_has_hit_break() from risc-v kgdb.h to generic
kgdb.h to avoid generating these warnings.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The XML packet could be supported by required architecture if the
architecture defines CONFIG_HAVE_ARCH_KGDB_QXFER_PKT and implement its own
kgdb_arch_handle_qxfer_pkt(). Except for the kgdb_arch_handle_qxfer_pkt(),
the architecture also needs to record the feature supported by gdb stub
into the kgdb_arch_gdb_stub_feature, and these features will be reported
to host gdb when gdb stub receives the qSupported packet.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Device unit for port buffers size, xoff_threshold and xon_threshold is
cells. Fix a bug in driver where cell unit size was hard-coded to
128 bytes. This hard-coded value is buggy, as it is wrong for some hardware
versions.
Driver to read cell size from SBCAM register and translate bytes to cell
units accordingly.
In order to fix the bug, this patch exposes SBCAM (Shared buffer
capabilities mask) layout and defines.
If SBCAM.cap_cell_size is valid, use it for all bytes to cells
calculations. If not valid, fallback to 128.
Cell size do not change on the fly per device. Instead of issuing SBCAM
access reg command every time such translation is needed, cache it in
mlx5e_dcbx as part of mlx5e_dcbnl_initialize(). Pass dcbx.port_buff_cell_sz
as a param to every function that needs bytes to cells translation.
While fixing the bug, move MLX5E_BUFFER_CELL_SHIFT macro to
en_dcbnl.c, as it is only used by that file.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order for no_refcnt and is_data to be the lowest order two
bits in the 'val' we have to pad out the bitfield of the u8.
Fixes: ad0f75e5f5 ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.
Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9
is a much better minimum version to target.
We have a number of workarounds for actual bugs in pre-4.9 gcc versions
(including things like internal compiler errors on ARM), but we also
have some syntactic workarounds for lacking features.
In particular, raising the minimum to 4.9 means that we can now just
assume _Generic() exists, which is likely the much better replacement
for a lot of very convoluted built-time magic with conditionals on
sizeof and/or __builtin_choose_expr() with same_type() etc.
Using _Generic also means that you will need to have a very recent
version of 'sparse', but thats easy to build yourself, and much less of
a hassle than some old gcc version can be.
The latest (in a long string) of reasons for minimum compiler version
upgrades was commit 5435f73d5c ("efi/x86: Fix build with gcc 4").
Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on
old RHEL versions persumably also don't build their own kernels anyway.
And maybe they should cross-built or just have a little side affair with
a newer compiler?
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshiaki pointed out that we now have two very similar functions to extract
the L3 protocol number in the presence of VLAN tags. And Daniel pointed out
that the unbounded parsing loop makes it possible for maliciously crafted
packets to loop through potentially hundreds of tags.
Fix both of these issues by consolidating the two parsing functions and
limiting the VLAN tag parsing to a max depth of 8 tags. As part of this,
switch over __vlan_get_protocol() to use skb_header_pointer() instead of
pskb_may_pull(), to avoid the possible side effects of the latter and keep
the skb pointer 'const' through all the parsing functions.
v2:
- Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT)
Reported-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: d7bf2ebebc ("sched: consistently handle layer3 header accesses in the presence of VLANs")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an IOCB_NOIO flag that indicates to generic_file_read_iter that it
shouldn't trigger any filesystem I/O for the actual request or for
readahead. This allows to do tentative reads out of the page cache as
some filesystems allow, and to take the appropriate locks and retry the
reads only if the requested pages are not cached.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.
sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.
The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.
This bug seems to be introduced since the beginning, commit
d979a39d72 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b229
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: Daniël Sonck <dsonck92@gmail.com>
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Tested-by: Cameron Berkenpas <cam@neo-zeon.de>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add brackets to protect parameters of the recently added sg_table related
macros from side-effects.
Fixes: 709d6d73c7 ("scatterlist: add generic wrappers for iterating over sgtable objects")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d26 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull PCI fix from Bjorn Helgaas:
"Fix a pcie_find_root_port() simplification that broke power management
because it didn't handle the edge case of finding the Root Port of a
Root Port itself (Mika Westerberg)""
* tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Make pcie_find_root_port() work for Root Ports
Pull block fixes from Jens Axboe:
- Use kvfree_sensitive() for the block keyslot free (Eric)
- Sync blk-mq debugfs flags (Hou)
- Memory leak fix in virtio-blk error path (Hou)
* tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
virtio-blk: free vblk-vqs in error path of virtblk_probe()
block/keyslot-manager: use kvfree_sensitive()
blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
Commit 6ae72bfa65 ("PCI: Unify pcie_find_root_port() and
pci_find_pcie_root_port()") broke acpi_pci_bridge_d3() because calling
pcie_find_root_port() on a Root Port returned NULL when it should return
the Root Port, which in turn broke power management of PCIe hierarchies.
Rework pcie_find_root_port() so it returns its argument when it is already
a Root Port.
[bhelgaas: test device only once, test for PCIe]
Fixes: 6ae72bfa65 ("PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()")
Link: https://lore.kernel.org/r/20200622161248.51099-1-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull security subsystem fixes from James Morris:
"Two simple fixes for v5.8:
- Fix hook iteration and default value for inode_copy_up_xattr
(KP Singh)
- Fix the key_permission LSM hook function type (Sami Tolvanen)"
* tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: Fix hook iteration and default value for inode_copy_up_xattr
security: fix the key_permission LSM hook function type
