Using the three functions we can print the dceip, vbios and data struct
for bandwidth calculations. This is useful for debugging bandwidth
calculation issues without a debugger
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't attempt to read EDID in atomic_check. We really shouldn't
even be modifying the connector object, or any other non-state object,
but this is a start at least.
Moving EDID cleanup to dm_dp_mst_connector_destroy from
dm_dp_destroy_mst_connector to ensure the EDID is still available for
headless mode.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some DP panel not detected intermittently due to read dpcd
caps failed when doing hot plug.
[root cause] DC_HPD_CONNECT_INT_DELAY is set to 0, not delay
after HPD toggle and read dpcd data, while some panel need 4ms defer
to read.
[solution] Add a retry when read failed.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Report 64-bit doorbells as HSA_CAP_DOORBELL_TYPE_2_0 in topology
* Report cache information in topology (duplicates GFXv8 info for now)
* Add device info for Vega10 support in KFD
Raven is not enabled at this time as it needs additional changes in
DQM to work with a single SDMA engine.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Report failure to enable atomics only on GPUs that require them.
This allows GPUs that don't require atomics to function, but can
benefit if they are available. This is the case for Vega10, which
doesn't use atomics for basic functioning of the MEC, AQL and HWS
microcode. So it can work without atomics. But shader programs can
still use atomic instructions on systems that support PCIe atomics.
Signed-off-by: welu <Wei.Lu2@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
kq->queue->properties.write_ptr is a GPU address which can'd be
derefenced in the kernel. Use kq->wptr_kernel instead, which is the
kernel CPU address of the same buffer.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Missed a spot in previous cleanup commit:
Remove gotos that do not feature any common cleanup, and use gotos
instead of repeating cleanup commands.
According to kernel.org: "The goto statement comes in handy when a
function exits from multiple locations and some common work such as
cleanup has to be done. If there is no cleanup needed then just return
directly."
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allocate doorbells according to the doorbell routing information on
SOC15 ASICs (Vega10 and later). On older ASICs we continue to use the
queue_id as the doorbell ID to maintain compatibility with the Thunk.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Use bit-rotate for better clarity and remove _MASK from the #defines as
these represent mmap types.
Centralize all the parsing of the mmap offset in kfd_mmap and add device
parameter to doorbell and reserved_mem map functions.
Encode gpu_id into upper bits of vm_pgoff. This frees up the lower bits
for encoding the the doorbell ID on Vega10.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is needed for Vega10 and later ASICs to let KFD know which
doorbells can be used for SDMA and CP queues respectively.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Joe Perches noted that we have a few source files that for some
inexplicable reason (read: I'm too lazy to even go look at the history)
are marked executable:
drivers/gpu/drm/amd/amdgpu/vce_v4_0.c
drivers/net/ethernet/cadence/macb_ptp.c
A simple git command line to show executable C/asm/header files is this:
git ls-files -s '*.[chsS]' | grep '^100755'
and then you can fix them up with scripting by just feeding that output
into:
| cut -f2 | xargs chmod -x
and commit it.
Which is exactly what this commit does.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kfifo: fix inaccurate comment
tools/thermal: tmon: fix for segfault
net: Spelling s/stucture/structure/
edd: don't spam log if no EDD information is present
Documentation: Fix early-microcode.txt references after file rename
tracing: Block comments should align the * on each line
treewide: Fix typos in printk
GenWQE: Fix a typo in two comments
treewide: Align function definition open/close braces
amdgpu driver checks vgacon_text_force() after some initializations
but without cleaning up. This will result in leaks.
Move the check of vgacon_text_force() to the beginning of
amdgpu_init() for fixing it and also for optimization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also remove code duplication in write and read regs functions.
This also fixes potential missing unlock in amdgpu_debugfs_regs_write
in case get_user would fail.
v2: Add SRBM mutex locking.
v3: Fix TO counter and fix comment location.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit bbaf1871ea1d7b7021e350a3e8bb1ec8408c2030.
Felix reports this commit causes regression.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power value is wrong reported by customer. It is a regression by
commit a7c7bc4c0c
Author: Rex Zhu <Rex.Zhu@amd.com>
Date: Mon Mar 27 15:32:59 2017 +0800
drm/amd/powerplay: reduce sample period time
for power readings.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The theoretical sampling period is from 50ms to 4sec, original 2sec
is long but correct, and 20ms is too short. change it to more
reasonable 200ms.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port the atomfirmware.h and populates the
updated pptable to SMU.With the new parameters
in the new pptable, the ACG SS feature is enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem: When unbind and then bind back the device KIQ hangs on Vega
after mapping KCQs request.
Fix: Adding deinitialzie code from CAIL during HW fini solves the
hang.
v2: use srbm_mutex around soc15_grbm_select()
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This has a static checker warning because "frev" and "crev" can be
uninitialized if "info" is NULL. I just changed the order of the checks
so that we check "info" first.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sriov still wants these error messags on timeout. So, for sriov
use case, the timeout setting on compute rings is kept.
-v2: clean the code
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
