Factor out helper for copying lower inode data and metadata to temp
upper inode, that is common to copy up using O_TMPFILE and workdir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On copy up of regular file using an O_TMPFILE, lock upper dir only
before linking the tempfile in place.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Bad index entries are entries whose name does not match the
origin file handle stored in trusted.overlay.origin xattr.
Bad index entries could be a result of a system power off in
the middle of copy up.
Stale index entries are entries whose origin file handle is
stale. Stale index entries could be a result of copying layers
or removing lower entries while the overlay is not mounted.
The case of copying layers should be detected earlier by the
verification of upper root dir origin and index dir origin.
Both bad and stale index entries are detected and removed
on mount.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When inodes index feature is enabled, lookup in indexdir for the index
entry of lower real inode or copy up origin inode. The index entry name
is the hex representation of the lower inode file handle.
If the index dentry in negative, then either no lower aliases have been
copied up yet, or aliases have been copied up in older kernels and are
not indexed.
If the index dentry for a copy up origin inode is positive, but points
to an inode different than the upper inode, then either the upper inode
has been copied up and not indexed or it was indexed, but since then
index dir was cleared. Either way, that index cannot be used to indentify
the overlay inode.
If a positive dentry that matches the upper inode was found, then it is
safe to use the copy up origin st_ino for upper hardlinks, because all
indexed upper hardlinks are represented by the same overlay inode as the
copy up origin.
Set the INDEX type flag on an indexed upper dentry. A non-upper dentry
may also have a positive index from copy up of another lower hardlink.
This situation will be handled by following patches.
Index lookup is going to be used to prevent breaking hardlinks on copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An index dir contains persistent hardlinks to files in upper dir.
Therefore, we must never mount an existing index dir with a differnt
upper dir.
Store the upper root dir file handle in index dir inode when index
dir is created and verify the file handle before using an existing
index dir on mount.
Add an 'is_upper' flag to the overlay file handle encoding and set it
when encoding the upper root file handle. This is not critical for index
dir verification, but it is good practice towards a standard overlayfs
file handle format for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When inodes index feature is enabled, verify that the file handle stored
in upper root dir matches the lower root dir or fail to mount.
If upper root dir has no stored file handle, encode and store the lower
root dir file handle in overlay.origin xattr.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Create the index dir on mount. The index dir will contain hardlinks to
upper inodes, named after the hex representation of their origin lower
inodes.
The index dir is going to be used to prevent breaking lower hardlinks
on copy up and to implement overlayfs NFS export.
Because the feature is not fully backward compat, enabling the feature
is opt-in by config/module/mount option.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pass in the subdir name to create and specify if subdir is persistent
or if it should be cleaned up on every mount.
Move fallback to readonly mount on failure to create dir and print of error
message into the helper.
This function is going to be used for creating the persistent 'index' dir
under workbasedir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For the case of all layers not on the same fs, try to decode the copy up
origin file handle on any of the lower layers.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Bad things can happen if several concurrent overlay mounts try to
use the same upperdir/workdir path.
Try to get the 'inuse' advisory lock on upperdir and workdir.
Fail mount if another overlay mount instance or another user
holds the 'inuse' lock on these directories.
Note that this provides no protection for concurrent overlay
mount that use overlapping (i.e. descendant) upper/work dirs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Added an i_state flag I_INUSE and helpers to set/clear/test the bit.
The 'inuse' lock is an 'advisory' inode lock, that can be used to extend
exclusive create protection beyond parent->i_mutex lock among cooperating
users.
This is going to be used by overlayfs to get exclusive ownership on upper
and work dirs among overlayfs mounts.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the new ovl_inode mutex to synchonize concurrent copy up
instead of the super block copy up workqueue.
Moving the synchronization object from the overlay dentry to
the overlay inode is needed for synchonizing concurrent copy up
of lower hardlinks to the same upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When checking for consistency in directory operations (unlink, rename,
etc.) match inodes not dentries.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We need some more space to store overlay inode data in memory,
so allocate overlay inodes from a slab of struct ovl_inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch fixes an overlay inode nlink leak in the case where
ovl_rename() renames over a non-dir.
This is not so critical, because overlay inode doesn't rely on
nlink dropping to zero for inode deletion.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Both in memory or on disk, generic filesystems record i_blocks with
512bytes sized sector count, also VFS sub module such as disk quota
follows this rule, but f2fs records it with 4096bytes sized block
count, this difference leads to that once we use dquota's function
which inc/dec iblocks, it will make i_blocks of f2fs being inconsistent
between in memory and on disk.
In order to resolve this issue, this patch changes to make in-memory
i_blocks of f2fs recording sector count instead of block count,
meanwhile leaving on-disk i_blocks recording block count.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't set CP_TRIMMED_FLAG for non-zoned block device or discard
unsupported device, it can avoid to trigger unneeded checkpoint for
that kind of device.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, filesystems allow truncate(2) on an encrypted file without
the encryption key. However, it's impossible to correctly handle the
case where the size being truncated to is not a multiple of the
filesystem block size, because that would require decrypting the final
block, zeroing the part beyond i_size, then encrypting the block.
As other modifications to encrypted file contents are prohibited without
the key, just prohibit truncate(2) as well, making it fail with ENOKEY.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Codes related to sysfs and procfs are dispersive and mixed with sb
related codes, but actually these codes are independent from others,
so split them from super.c, and reorgnize and manger them in sysfs.c.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes incorrect error number in error path of fill_super.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If fault injection functionality is enabled, show additional injection
rate in ->show_options.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It is better to use variable name "inline_dentry" instead of "dentry_blk"
when data type is "struct f2fs_inline_dentry". This patch has no functional
changes, just to make code more readable especially when call the function
make_dentry_ptr_inline() and f2fs_convert_inline_dir().
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With fault_injection option, generic/361 of fstests will complain us
with below message:
Call Trace:
get_node_page+0x12/0x20 [f2fs]
f2fs_iget+0x92/0x7d0 [f2fs]
f2fs_fill_super+0x10fb/0x15e0 [f2fs]
mount_bdev+0x184/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
mount_fs+0x39/0x150
vfs_kern_mount+0x67/0x110
do_mount+0x1bb/0xc70
SyS_mount+0x83/0xd0
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
Since mkfs loop device in f2fs partition can be failed silently due to
checkpoint error injection, so root inode page can be corrupted, in order
to avoid needless panic, in get_node_page, it's better to leave message
and return error to caller, and let fsck repaire it later.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We will never persist newly allocated nat entries during checkpoint(), so
we don't need to track such nat entries in nat dirty list in order to
avoid:
- more latency during traversing dirty list;
- sorting nat sets incorrectly due to recording wrong entry_cnt in nat
entry set.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Recently, discard related codes have changed a lot, so add f2fs_bug_on to
detect potential bug.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently in F2FS, page faults and operations that truncate the pagecahe
or data blocks, are completely unsynchronized. This can result in page
fault faulting in a page into a range that we are changing after
truncating, and thus we can end up with a page mapped to disk blocks that
will be shortly freed. Filesystem corruption will shortly follow.
This patch fixes the problem by creating new rw semaphore i_mmap_sem in
f2fs_inode_info and grab it for functions removing blocks from extent tree
and for read over page faults. The mechanism is similar to that in ext4.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The index of segment which the next nat block is in has only one different
bit than the current one, so to get the next nat address, we can simply
alter that one bit.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mount fs with option noflush_merge, boot failed for illegal address
fcc in function f2fs_issue_flush:
if (!test_opt(sbi, FLUSH_MERGE)) {
ret = submit_flush_wait(sbi);
atomic_inc(&fcc->issued_flush); -> Here, fcc illegal
return ret;
}
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For example,
f2fs_create
- new_node_page is failed
- handle_failed_inode
- skip to add it into orphan list, since ni.blk_addr == NULL_ADDR
: set_inode_flag(inode, FI_FREE_NID)
f2fs_evict_inode
- EIO due to fault injection
- f2fs_bug_on() is triggered
So, we don't need to call f2fs_bug_on in this case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
clear_prefree_segments() issues small discards after discarding full
segments. These small discards may not be section aligned, so not zone
aligned on a zoned block device, causing __f2fs_iissue_discard_zone() to fail.
Fix this by not issuing small discards for a volume mounted with the BLKZONED
feature enabled.
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull documentation updates from Jonathan Corbet:
"There has been a fair amount of activity in the docs tree this time
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates"
* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
scripts/kernel-doc: handle DECLARE_HASHTABLE
Documentation: atomic_ops.txt is core-api/atomic_ops.rst
Docs: clean up some DocBook loose ends
Make the main documentation title less Geocities
Docs: Use kernel-figure in vidioc-g-selection.rst
Docs: fix table problems in ras.rst
Docs: Fix breakage with Sphinx 1.5 and upper
Docs: Include the Latex "ifthen" package
doc/kokr/howto: Only send regression fixes after -rc1
docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
doc: Document suitability of IBM Verse for kernel development
Doc: fix a markup error in coding-style.rst
docs: driver-api: i2c: remove some outdated information
Documentation: DMA API: fix a typo in a function name
Docs: Insert missing space to separate link from text
doc/ko_KR/memory-barriers: Update control-dependencies example
Documentation, kbuild: fix typo "minimun" -> "minimum"
docs: Fix some formatting issues in request-key.rst
doc: ReSTify keys-trusted-encrypted.txt
doc: ReSTify keys-request-key.txt
...
ext4_inode_info->i_data is the storage area for 4 types of data:
a) Extents data
b) Inline data
c) Block map
d) Fast symlink data (symlink length < 60)
Extents data case is positively identified by EXT4_INODE_EXTENTS flag.
Inline data case is also obvious because of EXT4_INODE_INLINE_DATA
flag.
Distinguishing c) and d) however requires additional logic. This
currently relies on i_blocks count. After subtracting external xattr
block from i_blocks, if it is greater than 0 then we know that some
data blocks exist, so there must be a block map.
This logic got broken after ea_inode feature was added. That feature
charges the data blocks of external xattr inodes to the referencing
inode and so adds them to the i_blocks. To fix this, we could subtract
ea_inode blocks by iterating through all xattr entries and then check
whether remaining i_blocks count is zero. Besides being complicated,
this won't change the fact that the current way of distinguishing
between c) and d) is fragile.
The alternative solution is to test whether i_size is less than 60 to
determine fast symlink case. ext4_symlink() uses the same test to decide
whether to store the symlink in i_data. There is one caveat to address
before this can work though.
If an inode's i_nlink is zero during eviction, its i_size is set to
zero and its data is truncated. If system crashes before inode is removed
from the orphan list, next boot orphan cleanup may find the inode with
zero i_size. So, a symlink that had its data stored in a block may now
appear to be a fast symlink. The solution used in this patch is to treat
i_size = 0 as a non-fast symlink case. A zero sized symlink is not legal
so the only time this can happen is the mentioned scenario. This is also
logically correct because a i_size = 0 symlink has no data stored in
i_data.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Pull tty/serial updates from Greg KH:
"Here is the large tty/serial patchset for 4.13-rc1.
A lot of tty and serial driver updates are in here, along with some
fixups for some __get/put_user usages that were reported. Nothing
huge, just lots of development by a number of different developers,
full details in the shortlog.
All of these have been in linux-next for a while"
* tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
tty: serial: lpuart: add a more accurate baud rate calculation method
tty: serial: lpuart: add earlycon support for imx7ulp
tty: serial: lpuart: add imx7ulp support
dt-bindings: serial: fsl-lpuart: add i.MX7ULP support
tty: serial: lpuart: add little endian 32 bit register support
tty: serial: lpuart: refactor lpuart32_{read|write} prototype
tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
serial: imx-serial - move DMA buffer configuration to DT
serial: imx: Enable RTSD only when needed
serial: imx: Remove unused members from imx_port struct
serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout
serial: 8250: Fix THRE flag usage for CAP_MINI
tty/serial: meson_uart: update to stable bindings
dt-bindings: serial: Add bindings for the Amlogic Meson UARTs
serial: Delete dead code for CIR serial ports
serial: sirf: make of_device_ids const
serial/mpsc: switch to dma_alloc_attrs
tty: serial: Add Actions Semi Owl UART earlycon
dt-bindings: serial: Document Actions Semi Owl UARTs
tty/serial: atmel: make the driver DT only
...
UUID/GUID updates:
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
