Commit dedfde2fe1 ("mlxsw: spectrum_dcb: Configure DSCP map as the last
rule is removed") fixed a problem in mlxsw where last DSCP rule to be
removed remained in effect when DSCP rewrite was applied.
Add a selftest that covers this problem.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These two tests have some problems in the global scope pollution and on
contrary, contain unnecessary local declarations. Fix them.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clear buffered output once test or subtests finishes even if test was
successful. Not doing this leads to accumulation of output from previous
tests and on first failed tests lots of irrelevant output will be
dumped, greatly confusing things.
v1->v2: fix Fixes tag, add more context to patch
Fixes: 3a516a0a3a ("selftests/bpf: add sub-tests support for test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Modify the existing bpf_tcp_check_syncookie test to also generate a
SYN cookie, pass the packet to the kernel, and verify that the two
cookies are the same (and both valid). Since cloned SKBs are skipped
during generic XDP, this test does not issue a SYN cookie when run in
XDP mode. We therefore only check that a valid SYN cookie was issued at
the TC hook.
Additionally, verify that the MSS for that SYN cookie is within
expected range.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests. Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.
Note this functionality needs to keep in sync with:
- dynamic_debug input/output formatting
- functions affected by set_dynamic_debug()
For example, push_dynamic_debug() transforms:
kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
to the following:
file kernel/livepatch/transition.c line 530 =_
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, using "%m" in a ksft_* format string can result in strange
output because the errno value wasn't saved before calling other libc
functions. The solution is to simply save and restore the errno before
we format the user-supplied format string.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull pidfd fixes from Christian Brauner:
"This makes setting the exit_state in exit_notify() consistent after
fixing the pidfd polling race pre-rc1. Related to the race fix, this
adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state
races.
Last, this removes an obsolete comment from the pidfd tests"
* tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: make setting exit_state consistent
pidfd: Add warning if exit_state is 0 during notification
pidfd: remove obsolete comments from test
Pull kselftest fixes from Shuah Khan:
"Minor fixes to tests and one major fix to livepatch test to add skip
handling to avoid false fail reports when livepatch is disabled"
* tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: add test skip handling
selftests: mlxsw: Fix typo in qos_mc_aware.sh
selftests/x86: fix spelling mistake "FAILT" -> "FAIL"
selftests: kmod: Fix typo in kmod.sh
Convert send_signal set of tests to be exposed as three sub-tests.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow tests to have their own set of sub-tests. Also add ability to do
test/subtest selection using `-t <test-name>/<subtest-name>` and `-n
<test-nums-set>/<subtest-nums-set>`, as an extension of existing -t/-n
selector options. For the <test-num-set> format: it's a comma-separated
list of either individual test numbers (1-based), or range of test
numbers. E.g., all of the following are valid sets of test numbers:
- 10
- 1,2,3
- 1-3
- 5-10,1,3-4
'/<subtest' part is optional, but has the same format. E.g., to select
test #3 and its sub-tests #10 through #15, use: -t 3/10-15.
Similarly, to select tests by name, use `-t verif/strobe`:
$ sudo ./test_progs -t verif/strobe
#3/12 strobemeta.o:OK
#3/13 strobemeta_nounroll1.o:OK
#3/14 strobemeta_nounroll2.o:OK
#3 bpf_verif_scale:OK
Summary: 1/3 PASSED, 0 FAILED
Example of using subtest API is in the next patch, converting
bpf_verif_scale.c tests to use sub-tests.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes how test output is printed out. By default, if test
had no errors, the only output will be a single line with test number,
name, and verdict at the end, e.g.:
#31 xdp:OK
If test had any errors, all log output captured during test execution
will be output after test completes.
It's possible to force output of log with `-v` (`--verbose`) option, in
which case output won't be buffered and will be output immediately.
To support this, individual tests are required to use helper methods for
logging: `test__printf()` and `test__vprintf()`.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make test_progs test runner own libbpf logging. Also introduce two
levels of verbosity: -v and -vv. First one will be used in subsequent
patches to enable test log output always. Second one increases verbosity
level of libbpf logging further to include debug output as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to specify either test number or test name substring to
narrow down a set of test to run.
Usage:
sudo ./test_progs -n 1
sudo ./test_progs -t attach_probe
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor test_progs to allow better control on what's being run.
Also use argp to do argument parsing, so that it's easier to keep adding
more options.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Apprently listing header as a normal dependency for a binary output
makes it go through compilation as if it was C code. This currently
works without a problem, but in subsequent commits causes problems for
differently generated test.h for test_progs. Marking those headers as
order-only dependency solves the issue.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_flow.c: exit early unless BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG is
passed in flags. Also, set ip_proto earlier, this makes sure we have
correct value with fragmented packets.
Add selftest cases to test ipv4/ipv6 fragments and skip eth_get_headlen
tests that don't have BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG flag.
eth_get_headlen calls flow dissector with
BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG flag so we can't run tests that
have different set of input flags against it.
v2:
* sefltests -> selftests (Willem de Bruijn)
* Reword a comment about eth_get_headlen flags (Song Liu)
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Petar Penkov <ppenkov@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Software event output is only enabled by a few prog types.
This test is to ensure that all supported types are enabled for
bpf_perf_event_output successfully.
Signed-off-by: Allan Zhang <allanzhang@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix segfault in libbpf, from Andrii.
2) fix gso_segs access, from Eric.
3) tls/sockmap fixes, from Jakub and John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6_flowlabel and ipv6_flowlabel_mgr are missing from
gitignore. Quentin points out that the original
commit 3fb321fde2 ("selftests/net: ipv6 flowlabel")
did add ignore entries, they are just missing the "ipv6_"
prefix.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a skip() message function that stops the test, logs an explanation,
and sets the "skip" return code (4).
Before loading a livepatch self-test kernel module, first verify that
we've built and installed it by running a 'modprobe --dry-run'. This
should catch a few environment issues, including !CONFIG_LIVEPATCH and
!CONFIG_TEST_LIVEPATCH. In these cases, exit gracefully with the new
skip() function.
Reported-by: Jiri Benc <jbenc@redhat.com>
Suggested-by: Shuah Khan <shuah@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
libbpf's perf_buffer API supersedes trace_helper.h's helpers.
Remove those helpers after all existing users were already moved to
perf_buffer API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch test_tcpnotify test to use libbpf's perf_buffer API instead of
re-implementing portion of it.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert test_get_stack_raw_tp test to new perf_buffer API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use BPF_REG_1 for source and destination of gso_segs read,
to exercise "bpf: fix access to skb_shared_info->gso_segs" fix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The TC filters used in the test do not work with veth devices because the
outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw
netdevs since the hardware always looks at "The first Ethertype that
does not point to either: VLAN, CNTAG or configurable Ethertype".
Fix this by matching on the VLAN ID instead, but on the ingress side.
The reason why this is not performed at egress is explained in the
commit cited below.
Fixes: 541ad323db ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test did not enable IPv4 forwarding during its setup phase, which
causes the test to fail on machines where IPv4 forwarding is disabled.
Fixes: 54818c4c4b ("selftests: forwarding: Test multipath tunneling")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"sendmsg6: rewrite IP & port (C)" fails on s390, because the code in
sendmsg_v6_prog() assumes that (ctx->user_ip6[0] & 0xFFFF) refers to
leading IPv6 address digits, which is not the case on big-endian
machines.
Since checking bitwise operations doesn't seem to be the point of the
test, replace two short comparisons with a single int comparison.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add test which sends some data with MSG_MORE and then
closes the socket (never calling send without MSG_MORE).
This should make sure we clean up open records correctly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
MPX is being removed from the kernel due to a lack of support in the
toolchain going forward (gcc).
This is the smallest possible patch to fix some issues that have been
reported around running the MPX selftests. It it would also have been part
of any removal series, it is offered first.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190705175318.784C233E@viggo.jf.intel.com
For unfortunate historical reasons, the x32 syscalls and the x86_64
syscalls are not all numbered the same. As an example, ioctl() is nr 16 on
x86_64 but 514 on x32.
This has potentially nasty consequences, since it means that there are two
valid RAX values to do ioctl(2) and two invalid RAX values. The valid
values are 16 (i.e. ioctl(2) using the x86_64 ABI) and (514 | 0x40000000)
(i.e. ioctl(2) using the x32 ABI).
The invalid values are 514 and (16 | 0x40000000). 514 will enter the
"COMPAT_SYSCALL_DEFINE3(ioctl, ...)" entry point with in_compat_syscall()
and in_x32_syscall() returning false, whereas (16 | 0x40000000) will enter
the native entry point with in_compat_syscall() and in_x32_syscall()
returning true. Both are bogus, and both will exercise code paths in the
kernel and in any running seccomp filters that really ought to be
unreachable.
Splitting out the x32 syscalls into their own tables, allows both bogus
invocations to return -ENOSYS. I've checked glibc, musl, and Bionic, and
all of them appear to call syscalls with their correct numbers, so this
change should have no effect on them.
There is an added benefit going forward: new syscalls that need special
handling on x32 can share the same number on x32 and x86_64. This means
that the special syscall range 512-547 can be treated as a legacy wart
instead of something that may need to be extended in the future.
Also add a selftest to verify the new behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/208024256b764312598f014ebfb0a42472c19354.1562185330.git.luto@kernel.org
Pull NTB updates from Jon Mason:
"New feature to add support for NTB virtual MSI interrupts, the ability
to test and use this feature in the NTB transport layer.
Also, bug fixes for the AMD and Switchtec drivers, as well as some
general patches"
* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
NTB: Describe the ntb_msi_test client in the documentation.
NTB: Add MSI interrupt support to ntb_transport
NTB: Add ntb_msi_test support to ntb_test
NTB: Introduce NTB MSI Test Client
NTB: Introduce MSI library
NTB: Rename ntb.c to support multiple source files in the module
NTB: Introduce functions to calculate multi-port resource index
NTB: Introduce helper functions to calculate logical port number
PCI/switchtec: Add module parameter to request more interrupts
PCI/MSI: Support allocating virtual MSI interrupts
ntb_hw_switchtec: Fix setup MW with failure bug
ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
NTB: correct ntb_dev_ops and ntb_dev comment typos
NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
NTB: ntb_hw_amd: set peer limit register
NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
...
Pull x86 fixes from Thomas Gleixner:
"A set of x86 specific fixes and updates:
- The CR2 corruption fixes which store CR2 early in the entry code
and hand the stored address to the fault handlers.
- Revert a forgotten leftover of the dropped FSGSBASE series.
- Plug a memory leak in the boot code.
- Make the Hyper-V assist functionality robust by zeroing the shadow
page.
- Remove a useless check for dead processes with LDT
- Update paravirt and VMware maintainers entries.
- A few cleanup patches addressing various compiler warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Prevent clobbering of saved CR2 value
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
x86, boot: Remove multiple copy of static function sanitize_boot_params()
x86/boot/compressed/64: Remove unused variable
x86/boot/efi: Remove unused variables
x86/mm, tracing: Fix CR2 corruption
x86/entry/64: Update comments and sanity tests for create_gap
x86/entry/64: Simplify idtentry a little
x86/entry/32: Simplify common_exception
x86/paravirt: Make read_cr2() CALLEE_SAVE
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
x86/process: Delete useless check for dead process with LDT
x86: math-emu: Hide clang warnings for 16-bit overflow
x86/e820: Use proper booleans instead of 0/1
x86/apic: Silence -Wtype-limits compiler warnings
x86/mm: Free sme_early_buffer after init
x86/boot: Fix memory leak in default_get_smp_config()
Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
Pull more KVM updates from Paolo Bonzini:
"Mostly bugfixes, but also:
- s390 support for KVM selftests
- LAPIC timer offloading to housekeeping CPUs
- Extend an s390 optimization for overcommitted hosts to all
architectures
- Debugging cleanups and improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: x86: Add fixed counters to PMU filter
KVM: nVMX: do not use dangling shadow VMCS after guest reset
KVM: VMX: dump VMCS on failed entry
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
KVM: Boost vCPUs that are delivering interrupts
KVM: selftests: Remove superfluous define from vmx.c
KVM: SVM: Fix detection of AMD Errata 1096
KVM: LAPIC: Inject timer interrupt via posted interrupt
KVM: LAPIC: Make lapic timer unpinned
KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters
KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS
kvm: x86: ioapic and apic debug macros cleanup
kvm: x86: some tsc debug cleanup
kvm: vmx: fix coccinelle warnings
x86: kvm: avoid constant-conversion warning
x86: kvm: avoid -Wsometimes-uninitized warning
KVM: x86: expose AVX512_BF16 feature to guest
KVM: selftests: enable pgste option for the linker on s390
KVM: selftests: Move kvm_create_max_vcpus test to generic code
...
