reference_tracking is actually a set of 9 sub-tests. Make it explicitly so.
Also, add explicit "classifier/" prefix to BPF program section names to
let libbpf correctly guess program type. Thus, also remove explicit
bpf_prog__set_type() call.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-7-andriin@fb.com
test_progs never created a copy of subtest name, rather just stored
pointer to whatever string test provided. This is bad as that string
might be freed or modified by the end of subtest. Fix this by creating
a copy of given subtest name when subtest starts.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-6-andriin@fb.com
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
Return the maximum number of tc flower filters that can be offloaded.
Currently, this value corresponds to the number of counters supported by
the driver.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add resource_scale test suitable for Spectrum-2.
Invoke the mirror_gre test and check that the advertised scale numbers
are indeed supported.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the number of analyzers taken from the devlink command, instead of
hard-coded value, in order to make the test more generic.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_queue_stack_map.h is used only from BPF programs. Thus it should be
part of progs/ subdir. An added benefit of moving it there is that new
TEST_RUNNER_DEFINE_RULES macro-rule will properly capture dependency on
this header for all BPF objects and trigger re-build, if it changes.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-7-andriin@fb.com
Define test runner generation meta-rule that codifies dependencies
between test runner, its tests, and its dependent BPF programs. Use that
for defining test_progs and test_maps test-runners. Also additionally define
2 flavors of test_progs:
- alu32, which builds BPF programs with 32-bit registers codegen;
- bpf_gcc, which build BPF programs using GCC, if it supports BPF target.
Overall, this is accomplished through $(eval)'ing a set of generic
rules, which defines Makefile targets dynamically at runtime. See
comments explaining the need for 2 $(evals), though.
For each test runner we have (test_maps and test_progs, currently), and,
optionally, their flavors, the logic of build process is modeled as
follows (using test_progs as an example):
- all BPF objects are in progs/:
- BPF object's .o file is built into output directory from
corresponding progs/.c file;
- all BPF objects in progs/*.c depend on all progs/*.h headers;
- all BPF objects depend on bpf_*.h helpers from libbpf (but not
libbpf archive). There is an extra rule to trigger bpf_helper_defs.h
(re-)build, if it's not present/outdated);
- build recipe for BPF object can be re-defined per test runner/flavor;
- test files are built from prog_tests/*.c:
- all such test file objects are built on individual file basis;
- currently, every single test file depends on all BPF object files;
this might be improved in follow up patches to do 1-to-1 dependency,
but allowing to customize this per each individual test;
- each test runner definition can specify a list of extra .c and .h
files to be built along test files and test runner binary; all such
headers are becoming automatic dependency of each test .c file;
- due to test files sometimes embedding (using .incbin assembly
directive) contents of some BPF objects at compilation time, which are
expected to be in CWD of compiler, compilation for test file object does
cd into test runner's output directory; to support this mode all the
include paths are turned into absolute paths using $(abspath) make
function;
- prog_tests/test.h is automatically (re-)generated with an entry for
each .c file in prog_tests/;
- final test runner binary is linked together from test object files and
extra object files, linking together libbpf's archive as well;
- it's possible to specify extra "resource" files/targets, which will be
copied into test runner output directory, if it differes from
Makefile-wide $(OUTPUT). This is used to ensure btf_dump test cases and
urandom_read binary is put into a test runner's CWD for tests to find
them in runtime.
For flavored test runners, their output directory is a subdirectory of
common Makefile-wide $(OUTPUT) directory with flavor name used as
subdirectory name.
BPF objects targets might be reused between different test runners, so
extra checks are employed to not double-define them. Similarly, we have
redefinition guards for output directories and test headers.
test_verifier follows slightly different patterns and is simple enough
to not justify generalizing TEST_RUNNER_DEFINE/TEST_RUNNER_DEFINE_RULES
further to accomodate these differences. Instead, rules for
test_verifier are minimized and simplified, while preserving correctness
of dependencies.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-6-andriin@fb.com
Currently it's impossible to do `make test_progs` and have only
test_progs be built, because all the binary targets are defined in terms
of $(OUTPUT)/<binary>, and $(OUTPUT) is absolute path to current
directory (or whatever gets overridden to by user).
This patch adds simple re-directing targets for all test targets making
it possible to do simple and nice `make test_progs` (and any other
target).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-5-andriin@fb.com
test_core_reloc_kernel test captures its own process name and validates
it as part of the test. Given extra "flavors" of test_progs, this break
for anything by default test_progs binary. Fix the test to cut out
flavor part of the process name.
Fixes: ee2eb063d3 ("selftests/bpf: Add BPF_CORE_READ and BPF_CORE_READ_STR_INTO macro tests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-3-andriin@fb.com
We are building a bunch of "flavors" of test_progs, e.g., w/ alu32 flag
for Clang when building BPF object. test_progs setup is relying on
having all the BPF object files and extra resources to be available in
current working directory, though. But we actually build all these files
into a separate sub-directory. Next set of patches establishes
convention of naming "flavored" test_progs (and test runner binaries in
general) as test_progs-flavor (e.g., test_progs-alu32), for each such
extra flavor. This patch teaches test_progs binary to automatically
detect its own extra flavor based on its argv[0], and if present, to
change current directory to a flavor-specific subdirectory.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-2-andriin@fb.com
Load basic cls_bpf program.
Load raw_tracepoint program and attach to kfree_skb raw tracepoint.
Trigger cls_bpf via prog_test_run.
At the end of test_run kernel will call kfree_skb
which will trigger trace_kfree_skb tracepoint.
Which will call our raw_tracepoint program.
Which will take that skb and will dump it into perf ring buffer.
Check that user space received correct packet.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-12-ast@kernel.org
Fix O= and KBUILD_OUTPUT handling for relative paths.
export KBUILD_OUTPUT=../kselftest_size
make TARGETS=size kselftest-all
or
make O=../kselftest_size TARGETS=size kselftest-all
In both of these cases, targets get built in ../kselftest_size which is
a one level up from the size test directory.
make[1]: Entering directory '/mnt/data/lkml/kselftest_size'
make --no-builtin-rules INSTALL_HDR_PATH=$BUILD/usr \
ARCH=x86 -C ../../.. headers_install
INSTALL ../kselftest_size/usr/include
gcc -static -ffreestanding -nostartfiles -s get_size.c -o ../kselftest_size/size/get_size
/usr/bin/ld: cannot open output file ../kselftest_size/size/get_size: No such file or directory
collect2: error: ld returned 1 exit status
make[3]: *** [../lib.mk:138: ../kselftest_size/size/get_size] Error 1
make[2]: *** [Makefile:143: all] Error 2
make[1]: *** [/mnt/data/lkml/linux_5.4/Makefile:1221: kselftest-all] Error 2
make[1]: Leaving directory '/mnt/data/lkml/kselftest_size'
make: *** [Makefile:179: sub-make] Error 2
Use abs_objtree exported by the main Makefile.
Reported-by: Tim Bird <Tim.Bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Tim Bird <tim.bird@sony.com>
Acked-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Added TDC test cases for Ethernet LAYERED_OP operations:
- set single source Ethernet MAC
- set single destination Ethernet MAC
- set single invalid destination Ethernet MAC
- set Ethernet type
- invert source/destination/type fields
- add operation on Ethernet type field
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently couple of files that are write only were added to netdevsim
debugfs. Don't read these files and avoid error.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Add a bunch of tests validating CO-RE is handling field existence
relocation. Relaxed CO-RE relocation mode is activated for these new
tests to prevent libbpf from rejecting BPF object for no-match
relocation, even though test BPF program is not going to use that
relocation, if field is missing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-6-andriin@fb.com
Add a test that checks that if pid namespaces are configured the fdinfo
file of a pidfd contains an NSpid: entry containing the process id in
the current and additionally all nested namespaces. In the case that
a pidfd is from a pid namespace not in the same namespace hierarchy as
the process accessing the fdinfo file, ensure the 'NSpid' shows 0 for
that pidfd, analogous to the 'Pid' entry.
Signed-off-by: Christian Kellner <christian@kellner.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191014162034.2185-2-ckellner@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Given lots of selftests won't work without recent enough Clang/LLVM that
fully supports BTF, there is no point in maintaining outdated BTF
support detection and fall-back to pahole logic. Just assume we have
everything we need.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-3-andriin@fb.com
Given BPF programs rely on libbpf's bpf_helper_defs.h, which is
auto-generated during libbpf build, libbpf build has to happen before
we attempt progs/*.c build. Enforce it as order-only dependency.
Fixes: 24f25763d6 ("libbpf: auto-generate list of BPF helper definitions")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-2-andriin@fb.com
Pull powerpc fixes from Michael Ellerman:
"Fix a kernel crash in spufs_create_root() on Cell machines, since the
new mount API went in.
Fix a regression in our KVM code caused by our recent PCR changes.
Avoid a warning message about a failing hypervisor API on systems that
don't have that API.
A couple of minor build fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Desnes A. Nunes do
Rosario, Emmanuel Nicolet, Jordan Niethe, Laurent Dufour, Stephen
Rothwell"
* tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
spufs: fix a crash in spufs_create_root()
powerpc/kvm: Fix kvmppc_vcore->in_guest value in kvmhv_switch_to_host
selftests/powerpc: Fix compile error on tlbie_test due to newer gcc
powerpc/pseries: Remove confusing warning message.
powerpc/64s/radix: Fix build failure with RADIX_MMU=n
Alexei Starovoitov says:
====================
pull-request: bpf 2019-10-12
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) a bunch of small fixes. Nothing critical.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic tests to verify functionality of netdevsim reporters.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test virtual server via NAT.
Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# ipvs.sh: PASS
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Test virutal server via directing routing for IPv4.
Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Add tests checking that verifier does proper constant propagation for
read-only maps. If constant propagation didn't work, skipp_loop and
part_loop BPF programs would be rejected due to BPF verifier otherwise
not being able to prove they ever complete. With constant propagation,
though, they are succesfully validated as properly terminating loops.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191009201458.2679171-3-andriin@fb.com
Added test case for layered IP operation for a single source IP4/IP6
address and a single destination IP4/IP6 address.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
similar to commit 2c57da356800 ("selftests: kvm: fix sync_regs_test with
newer gccs") and commit 204c91eff7 ("KVM: selftests: do not blindly
clobber registers in guest asm") we better do not rely on gcc leaving
r11 untouched. We can write the simple ucall inline and have the guest
code completely as small assembler function.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.
This will avoid the following compiling error:
tlbie_test.c: In function 'main':
tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
