If the imx-sdma driver is built as a module, the fsl-sai device doesn't
disable on probing failure, which causes the warning in the next probing:
==================================================================
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable!
==================================================================
Disabling the device properly fixes the issue.
Fixes: 812ad463e0 ("ASoC: fsl_sai: Add support for runtime pm")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20200205160436.3813642-1-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two asrc module in imx8qm & imx8qxp, each module has
different clock configuration, and the DMA type is EDMA.
So in this patch, we define the new clocks, refine the clock map,
and include struct fsl_asrc_soc_data for different soc usage.
The EDMA channel is fixed with each dma request, one dma request
corresponding to one dma channel. So we need to request dma
channel with dma request of asrc module.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/f33dfe3157b5ab200e09ccbf9ab73d31fac6664b.1575452454.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The output divider should align with the output sample
rate, if use ideal sample rate, there will be a lot of overload,
which would cause underrun.
The maximum divider of asrc clock is 1024, but there is no
judgement for this limitation in driver, which may cause the divider
setting not correct.
For non-ideal ratio mode, the clock rate should divide the sample
rate with no remainder, and the quotient should be less than 1024.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/23c634e4bf58afce5b3ae67f5f42e8d1cae2639a.1572252307.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") removed
fsl_dma_ops but left a usage, leading to a build error for some
configs, eg. mpc85xx_defconfig:
sound/soc/fsl/fsl_dma.c: In function ‘fsl_soc_dma_probe’:
sound/soc/fsl/fsl_dma.c:905:18: error: ‘fsl_dma_ops’ undeclared (first use in this function)
dma->dai.ops = &fsl_dma_ops;
^~~~~~~~~~~
Remove the usage to fix the build.
Fixes: 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191025051353.2878-1-mpe@ellerman.id.au
Signed-off-by: Mark Brown <broonie@kernel.org>
There are several problems in the error handling in fsl_mqs_probe().
1) "ret" isn't initialized on some paths. GCC has a feature which
warns about uninitialized variables but the code initializes "ret"
to zero at the start of the function so the checking is turned off.
2) "gpr_np" is a pointer so initializing it to zero is confusing and
generates a Sparse warning.
3) of_parse_phandle() doesn't return error pointers on error, it returns
NULL.
4) If devm_snd_soc_register_component() fails then the function should
free the "gpr_np".
Fixes: 9e28f6532c ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191004102208.GB823@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
MQS (medium quality sound), is used to generate medium quality
audio via a standard digital output pin. It can be used to
connect stereo speakers or headphones simply via power amplifier
stages without an additional DAC chip. It only accepts 2-channel,
LSB-valid 16bit, MSB shift-out first, frame sync asserting with
the first bit of the frame, data shifted with the posedge of
bit clock, 44.1 kHz or 48 kHz signals from SAI1 in left justified
format; and it provides the SNR target as no more than 20dB for
the signals below 10 kHz. The signals above 10 kHz will have
worse THD+N values.
MQS provides only simple audio reproduction. No internal pop,
click or distortion artifact reduction methods are provided.
The MQS receives the audio data from the SAI1 Tx section.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/74dfc73a92d2df4213225abe7d2a3db82672fe0f.1568367274.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The test case is
arecord -Dhw:0 -d 10 -f S16_LE -r 48000 -c 2 temp.wav &
aplay -Dhw:0 -d 30 -f S16_LE -r 48000 -c 2 test.wav
There will be error after end of arecord:
aplay: pcm_write:2051: write error: Input/output error
Capture and Playback work in parallel in master mode, one
substream stops, the other substream is impacted, the
reason is that clock is disabled wrongly.
The clock's reference count is not increased when second
substream starts, the hw_param() function returns in the
beginning because first substream is enabled, then in end
of first substream, the hw_free() disables the clock.
This patch is to move the clock enablement to the place
before checking of the device enablement in hw_param().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1567012817-12625-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SAI IP supports up to 8 data lines. The configuration of
supported number of data lines is decided at SoC integration
time.
This patch adds definitions for all related data TX/RX registers:
* TDR0..7, Transmit data register
* TFR0..7, Transmit FIFO register
* RDR0..7, Receive data register
* RFR0..7, Receive FIFO register
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-50-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
commit d8893261a7 ("ASoC: fsl: imx-audmix: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit d8893261a7 ("ASoC: fsl: imx-audmix: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
