In NPIV environment, a NPIV host may use a queue pair created by base host
or other NPIVs, so the check for a queue pair created by this NPIV is not
correct, and can cause an abort to fail, which in turn means the NVME
command not returned. This leads to hang in nvme_fc layer in
nvme_fc_delete_association() which waits for all I/Os to be returned, which
is seen as hang in the application.
Link: https://lore.kernel.org/r/20200331104015.24868-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qlt_free_session_done() tries to post async PRLO / LOGO, and waits for the
completion of these async commands. If UNLOADING is set, this is doomed to
timeout, because the async logout command will never complete.
The only way to avoid waiting pointlessly is to fail posting these commands
in the first place if the driver is in UNLOADING state. In general,
posting any command should be avoided when the driver is UNLOADING.
With this patch, "rmmod qla2xxx" completes without noticeable delay.
Link: https://lore.kernel.org/r/20200421204621.19228-3-mwilck@suse.com
Fixes: 45235022da ("scsi: qla2xxx: Fix driver unload by shutting down chip")
Acked-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The purpose of the UNLOADING flag is to avoid port login procedures to
continue when a controller is in the process of shutting down. It makes
sense to set this flag before starting session teardown.
Furthermore, use atomic test_and_set_bit() to avoid the shutdown being run
multiple times in parallel. In qla2x00_disable_board_on_pci_error(), the
test for UNLOADING is postponed until after the check for an already
disabled PCI board.
Link: https://lore.kernel.org/r/20200421204621.19228-2-mwilck@suse.com
Fixes: 45235022da ("scsi: qla2xxx: Fix driver unload by shutting down chip")
Reviewed-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/qla2xxx/qla_dbg.c:2542:7: warning: The scope of the variable 'pbuf'
can be reduced. [variableScope]
drivers/scsi/qla2xxx/qla_init.c:3615:6: warning: Variable 'rc' is assigned a
value that is never used. [unreadVariable]
drivers/scsi/qla2xxx/qla_isr.c:81:11-29: WARNING: dma_alloc_coherent use in
rsp_els already zeroes out memory, so memset is not needed
drivers/scsi/qla2xxx/qla_mbx.c:4889:15-33: WARNING: dma_alloc_coherent use in
els_cmd_map already zeroes out memory, so memset is not needed
[mkp: added newline after variable declaration]
Link: https://lore.kernel.org/r/20200403084018.30766-2-njavali@marvell.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull block fixes from Jens Axboe:
"Here's a set of fixes that should go into this merge window. This
contains:
- NVMe pull request from Christoph with various fixes
- Better discard support for loop (Evan)
- Only call ->commit_rqs() if we have queued IO (Keith)
- blkcg offlining fixes (Tejun)
- fix (and fix the fix) for busy partitions"
* tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block:
block: fix busy device checking in blk_drop_partitions again
block: fix busy device checking in blk_drop_partitions
nvmet-rdma: fix double free of rdma queue
blk-mq: don't commit_rqs() if none were queued
nvme-fc: Revert "add module to ops template to allow module references"
nvme: fix deadlock caused by ANA update wrong locking
nvmet-rdma: fix bonding failover possible NULL deref
loop: Better discard support for block devices
loop: Report EOPNOTSUPP properly
nvmet: fix NULL dereference when removing a referral
nvme: inherit stable pages constraint in the mpath stack device
blkcg: don't offline parent blkcg first
blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it
nvme-tcp: fix possible crash in recv error flow
nvme-tcp: don't poll a non-live queue
nvme-tcp: fix possible crash in write_zeroes processing
nvmet-fc: fix typo in comment
nvme-rdma: Replace comma with a semicolon
nvme-fcloop: fix deallocation of working context
nvme: fix compat address handling in several ioctls
The original patch was to resolve the lldd being able to be unloaded
while being used to talk to the boot device of the system. However, the
end result of the original patch is that any driver unload while a nvme
controller is live via the lldd is now being prohibited. Given the module
reference, the module teardown routine can't be called, thus there's no
way, other than manual actions to terminate the controllers.
Fixes: 863fbae929 ("nvme_fc: add module to ops template to allow module references")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
For N2N, fc_port struct is created during report id acquisition. At
later time, the loop resync (fabric, n2n, loop) would trigger the rest
of the login using the created fc_port struct. The loop resync logic
can trigger another fc_port allocation if the 1st allocation was not
able to execute. This patch prevents the 2nd allocation trigger.
Link: https://lore.kernel.org/r/20200226224022.24518-15-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit e4e3a2ce95 ("scsi: qla2xxx: Add ability to autodetect SFP
type") takes a heavy handed approach to BPM (Buffer Plus Management)
enablement:
1) During hardware initialization, if an LR-capable transceiver is
recognized, the driver schedules a disruptive post-initialization
chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the
firmware. This chip-reset will result in (short-term) path-loss to
all fc-rports and their attached SCSI devices.
2) LR-detection is triggered during any link-up event, resulting in a
refresh and potential chip-reset
Based on firmware-team guidance, upon LR-capable transceiver
recognition, the driver's hardware initialization code will now
re-execute firmware with the new BPM settings, then continue on with
driver initialization. To address the second issue, the driver
performs LR-capable detection upon the driver receiving a
transceiver-insertion asynchronous event from firmware. No short-term
path loss is needed with this new semantic.
Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following sparse warnings:
drivers/scsi/qla2xxx/qla_mbx.c:120:21: warning: restricted pci_channel_state_t degrades to integer
drivers/scsi/qla2xxx/qla_mbx.c:120:37: warning: restricted pci_channel_state_t degrades to integer
>From include/linux/pci.h:
enum pci_channel_state {
/* I/O channel is in normal state */
pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};
Link: https://lore.kernel.org/r/20200220043441.20504-4-bvanassche@acm.org
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the SCSI core does not reuse the tag of the SCSI command that is
being aborted by .eh_abort() before .eh_abort() has finished it is not
necessary to check from inside that callback whether or not the SCSI
command has already completed. Instead, rely on the firmware to return an
error code when attempting to abort a command that has already
completed. Additionally, rely on the firmware to return an error code when
attempting to abort an already aborted command.
In qla2x00_abort_srb(), use blk_mq_request_started() instead of
sp->completed and sp->aborted.
Link: https://lore.kernel.org/r/20200220043441.20504-2-bvanassche@acm.org
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does the following to improve RDP processing:
- Rename field port_id to d_id in ELS and PUREX iocb structs to match FW
spec.
- Remove redundant comments from ELS and PUREX iocb structs.
- Refactor fields in ELS iocb struct for error subcode common access.
- Properly use error subcode fields in rdp processing routine.
- Add print logs for alloc failure in purex rdp processing routine.
Link: https://lore.kernel.org/r/20200212214436.25532-13-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
