This can save users much troubles. As they do not
actually need to care whether swSMU or traditional
powerplay routine should be used.
V2: apply the fixes to vi.c and cik.c also
V3: squash in oops fix
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SOC15_REG_OFFSET() macro needs to dereference adev->reg_offset[IP]
pointer, which is sometimes NULL when there are fewer than 8 sdma engines.
Avoid that by not initializing the array regardless.
v2: squash in warning fixes
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge Intel Gen9 graphics fix from Akeem Abodunrin:
"Insufficient control flow in certain data structures for some Intel
Processors with Intel Processor Graphics may allow an unauthenticated
user to potentially enable information disclosure via local access
This provides mitigation for Gen9 hardware. Note that Gen8 is not
impacted due to a previously implemented workaround.
The mitigation involves using an existing hardware feature to forcibly
clear down all EU state at each context switch"
* tag 'Intel-CVE-2019-14615' of emailed bundle from Akeem G Abodunrin <akeem.g.abodunrin@intel.com>:
drm/i915/gen9: Clear residual context state on context switch
If 'CONFIG_DRM_I915_CAPTURE_ERROR' not configured, there is an error
when compile the kernel:
drivers/gpu/drm/i915/gt/intel_reset.c:
In function intel_gt_handle_error:
drivers/gpu/drm/i915/gt/intel_reset.c:1233:3:
error: too few arguments to function i915_capture_error_state
i915_capture_error_state(gt->i915);
^~~~~~~~~~~~~~~~~~~~~~~~
In file included
from ./drivers/gpu/drm/i915/i915_drv.h:97:0,
from ./drivers/gpu/drm/i915/display/intel_display_types.h:46,
from drivers/gpu/drm/i915/gt/intel_reset.c:10:
./drivers/gpu/drm/i915/i915_gpu_error.h:267:20: note: declared here
static inline void i915_capture_error_state(struct drm_i915_private *dev_priv,
Fixes: 742379c0c4 ("drm/i915: Start chopping up the GPU error capture")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113081942.15982-1-zhangxiaoxu5@huawei.com
If 'CONFIG_DRM_I915_CAPTURE_ERROR' not configured, there are some
errors like:
drivers/gpu/drm/i915/i915_irq.o:
In function `i915_vma_capture_finish':
./drivers/gpu/drm/i915/i915_gpu_error.h:312:
multiple definition of `i915_vma_capture_finish'
drivers/gpu/drm/i915/i915_drv.o:
./drivers/gpu/drm/i915/i915_gpu_error.h:312: first defined here
So, add 'static inline' on the defineation of the 'i915_vma_capture_finish'
Fixes: d713e3ab93fdc("drm/i915: Correct typo in i915_vma_compress_finish stub")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113104009.13274-1-zhangxiaoxu5@huawei.com
Since zap firmware can be device specific, allow for a firmware-name
property in the zap node to specify which firmware to load, similarly to
the scheme used for dsp/wifi/etc.
v2: only need a single error msg when we can't load from firmware-name
specified path, and fix comment [Bjorn A.]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Life is usually easier when we pass around intel_ types instead
of drm_ types. In this case it might not be, but I think being
consistent is a good thing anyway. Also some of this might get
cleaned up a bit more later as we keep propagating the intel_
types further.
@find@
identifier F =~ "^intel_attached_.*";
identifier C;
@@
F(struct drm_connector *C)
{
...
}
@@
identifier find.F;
identifier find.C;
@@
F(
- struct drm_connector *C
+ struct intel_connector *connector
)
{
<...
- C
+ &connector->base
...>
}
@@
identifier find.F;
expression C;
@@
- F(C)
+ F(to_intel_connector(C))
@@
expression C;
@@
- to_intel_connector(&C->base)
+ C
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
The Rockship DRM GEM code uses vmap()/vunmap() so vmalloc header must be
included to avoid warnings like (on IA64, compile tested):
drivers/gpu/drm/rockchip/rockchip_drm_gem.c: In function ‘rockchip_gem_alloc_iommu’:
drivers/gpu/drm/rockchip/rockchip_drm_gem.c:134:20: error:
implicit declaration of function ‘vmap’ [-Werror=implicit-function-declaration]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1577779956-7612-1-git-send-email-krzk@kernel.org
There seems to be some undocumented bandwidth
bottleneck/dependency which scales with CDCLK,
causing FIFO underruns when CDCLK is too low,
even when it's correct from BSpec point of view.
Currently for TGL platforms we calculate
min_cdclk initially based on pixel_rate divided
by 2, accounting for also plane requirements,
however in some cases the lowest possible CDCLK
doesn't work and causing the underruns.
We've found experimentally that raising cdclk to
at least pixel_rate (rather than pixel_rate/2)
eliminates these underruns, so let's use this as a
temporary workaround until the hardware team
can suggest a more precise remedy.
Explicitly stating here that this seems to be currently
rather a Hack, than final solution.
v2: Use clamp operation instead of min(Matt Roper)
v3: - Fixed commit message(Matt Roper)
- Now using pixel_rate instead of max_cdclk(Jani Nikula)
- Switched to max from clamp(Ville Syrjälä)
Hopefully this hybrid satisfies everyone :)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/402
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109220547.23817-1-stanislav.lisovskiy@intel.com
With gcc -O3 in combination with the structleak plug, the compiler can
inline very aggressively, leading to rather large stack usage:
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c: In function 'td028ttec1_prepare':
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c:233:1: error: the frame size of 2768 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
}
Marking jbt_reg_write_*() as noinline avoids the case where
multiple instances of this function get inlined into the same
stack frame and each one adds a copy of 'tx_buf'.
The compiler is clearly making some bad decisions here, but I
did not open a new bug report as this only happens in combination
with the structleak plugin.
This fixes mmtom ("init/Kconfig: enable -O3 for all arches")
Link: https://lore.kernel.org/lkml/CAK8P3a3jAnFZA3GFRtdYdg1-i-oih3pOQzkkrK-X3BGsFrMiZQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fix indent]
Link: https://patchwork.freedesktop.org/patch/msgid/20200108135116.3687988-1-arnd@arndb.de
With the db845c running AOSP, I see the following error on every
frame on the home screen:
[drm:dpu_plane_atomic_check:915] [dpu error]plane33 invalid src 2880x1620+0+470 line:2560
This is due to the error paths in atomic_check using
DPU_ERROR_PLANE(), and the drm_hwcomposer using atomic_check
to decide how to composite the frame (thus it expects to see
atomic_check to fail).
In order to avoid spamming the logs, this patch converts the
DPU_ERROR_PLANE() calls to DPU_DEBUG_PLANE() calls in
atomic_check.
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.
Hans de Goede (changes in v2):
Rename the function from drm_connector_init_panel_orientation_property
to drm_connector_set_panel_orientation[_with_quirk] and pass in the
panel-orientation to set.
Beside the rename, also make the function set the passed in value
only once, if the value was set before (to a value other then
DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
This change is preparation for allowing the user to override the
panel-orientation for any connector from the kernel commandline.
When the panel-orientation is overridden this way, then we must ignore
the panel-orientation detection done by the driver.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200105155120.96466-1-hdegoede@redhat.com
[why]
Compilation error "undefined reference to `__udivdi3'" was
thrown on i386 architecture.
[how]
Use div_u64 for unsigned long division instead of a divide operator.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
