Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Map EFI runtime service data as encrypted when SEV is enabled.
Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode.
- Remove the warning in the vector management code which triggered
when a managed interrupt affinity changed outside of a CPU hotplug
operation.
The warning was correct until the recent core code change that
introduced a CPU isolation feature which needs to migrate managed
interrupts away from online CPUs under certain conditions to
achieve the isolation"
* tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vector: Remove warning on managed interrupt migration
x86/ioremap: Map EFI runtime services data as encrypted for SEV
Pull perf fixes from Thomas Gleixner:
"A pile of perf fixes:
Kernel side:
- AMD uncore driver: Replace the open coded sanity check with the
core variant, which provides the correct error code and also leaves
a hint in dmesg
Tooling:
- Fix the stdio input handling with glibc versions >= 2.28
- Unbreak the futex-wake benchmark which was reduced to 0 test
threads due to the conversion to cpumaps
- Initialize sigaction structs before invoking sys_sigactio()
- Plug the mapfile memory leak in perf jevents
- Fix off by one relative directory includes
- Fix an undefined string comparison in perf diff"
* tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
tools: Fix off-by 1 relative directory includes
perf jevents: Fix leak of mapfile memory
perf bench: Clear struct sigaction before sigaction() syscall
perf bench futex-wake: Restore thread count default to online CPU count
perf top: Fix stdio interface input handling with glibc 2.28+
perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare
perf symbols: Don't try to find a vmlinux file when looking for kernel modules
perf bench: Share some global variables to fix build with gcc 10
perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files
perf env: Do not return pointers to local variables
perf tests bp_account: Make global variable static
Pull RAS fixes from Thomas Gleixner:
"Two RAS related fixes:
- Shut down the per CPU thermal throttling poll work properly when a
CPU goes offline.
The missing shutdown caused the poll work to be migrated to a
unbound worker which triggered warnings about the usage of
smp_processor_id() in preemptible context
- Fix the PPIN feature initialization which missed to enable the
functionality when PPIN_CTL was enabled but the MSR locked against
updates"
* tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix logic and comments around MSR_PPIN_CTL
x86/mce/therm_throt: Undo thermal polling properly on CPU offline
Pull kvm fixes from Paolo Bonzini:
"Bugfixes for x86 and s390"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect
KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
KVM: s390: Also reset registers in sync regs for initial cpu reset
KVM: fix Kconfig menu text for -Werror
KVM: x86: remove stale comment from struct x86_emulate_ctxt
KVM: x86: clear stale x86_emulate_ctxt->intercept value
KVM: SVM: Fix the svm vmexit code for WRMSR
KVM: X86: Fix dereference null cpufreq policy
When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter
with EVMCS GPA = 0 the host crashes because the
evmcs_gpa != vmx->nested.hv_evmcs_vmptr
condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to
false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will
happen on vmx->nested.hv_evmcs pointer dereference.
Another problematic EVMCS ptr value is '-1' but it only causes host crash
after nested_release_evmcs() invocation. The problem is exactly the same as
with '0', we mistakenly think that the EVMCS pointer hasn't changed and
thus nested.hv_evmcs_vmptr is valid.
Resolve the issue by adding an additional !vmx->nested.hv_evmcs
check to nested_vmx_handle_enlightened_vmptrld(), this way we will
always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL
and this is supposed to catch all invalid EVMCS GPAs.
Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs()
to be consistent with initialization where we don't currently
set hv_evmcs_vmptr to '-1'.
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously all fields of structure kvm_lapic_irq were not initialized
before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause
an issue when any of those fields are used for processing a request.
For example not initializing the msi_redir_hint field before passing
to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of
kvm_apic_map_get_dest_lapic(). This will specifically happen when the
kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage
value of msi_redir_hint, which should not happen as the request belongs
to APIC fixed delivery mode and we do not want to deliver the
interrupt only to the lowest priority candidate.
This patch initializes all the fields of kvm_lapic_irq based on the
values of ioapic redirect_entry object before passing it on to
kvm_bitmap_or_dest_vcpus().
Fixes: 7ee30bc132 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Set level to false since the value doesn't really matter. Suggested
by Vitaly Kuznetsov. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.
The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.
[1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
BGRT is for displaying seamless OEM logo from booting to login screen;
however, this mechanism does not always work well on all configurations
and the OEM logo can be displayed multiple times. This looks worse than
without BGRT enabled.
This patch adds a kernel parameter to disable BGRT in boot time. This is
easier than re-compiling a kernel with CONFIG_ACPI_BGRT disabled.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1
is not supported[*], i.e. intercepting ENCLS to inject a #UD is
unnecessary.
Avoiding ENCLS-exiting even when it is reported as supported by the CPU
works around a reported issue where SGX is "hard" disabled after an S3
suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
are enumerated as unsupported. While the root cause of the S3 issue is
unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
workaround for what is most likely a hardware or firmware issue. As a
bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
vmcs02.
Note, SGX must be disabled in BIOS to take advantage of this workaround
[*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
cleared. Soft disabled meaning disabling SGX without clearing the
primary CPUID bit (in leaf 0x7) and without poking into non-SGX
CPU paths, e.g. for the VMCS controls.
Fixes: 0b665d3040 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
Reported-by: Toni Spets <toni.spets@iki.fi>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g++ insists that function declaration must start with extern "C"
(which asmlinkage expands to).
gcc doesn't care.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The kbuild test robot reported compile issue on x86 in one of
the following patches that adds <linux/kallsyms.h> include into
<linux/bpf.h>, which is picked up by init_32.c object.
The problem is that <linux/kallsyms.h> defines global function
is_kernel_text which colides with the static function of the
same name defined in init_32.c:
$ make ARCH=i386
...
>> arch/x86/mm/init_32.c:241:19: error: redefinition of 'is_kernel_text'
static inline int is_kernel_text(unsigned long addr)
^~~~~~~~~~~~~~
In file included from include/linux/bpf.h:21:0,
from include/linux/bpf-cgroup.h:5,
from include/linux/cgroup-defs.h:22,
from include/linux/cgroup.h:28,
from include/linux/hugetlb.h:9,
from arch/x86/mm/init_32.c:18:
include/linux/kallsyms.h:31:19: note: previous definition of 'is_kernel_text' was here
static inline int is_kernel_text(unsigned long addr)
Renaming the init_32.c is_kernel_text function to __is_kernel_text.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-03-12
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 161 insertions(+), 15 deletions(-).
The main changes are:
1) Andrii fixed two bugs in cgroup-bpf.
2) John fixed sockmap.
3) Luke fixed x32 jit.
4) Martin fixed two issues in struct_ops.
5) Yonghong fixed bpf_send_signal.
6) Yoshiki fixed BTF enum.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The vector management code assumes that managed interrupts cannot be
migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE()
which triggers when a managed interrupt vector association on a online CPU
is cleared. The CPU offline code uses a different mechanism which cannot
trigger this.
This assumption is not longer correct because the new CPU isolation feature
which affects the placement of managed interrupts must be able to move a
managed interrupt away from an online CPU.
There are two reasons why this can happen:
1) When the interrupt is activated the affinity mask which was
established in irq_create_affinity_masks() is handed in to
the vector allocation code. This mask contains all CPUs to which
the interrupt can be made affine to, but this does not take the
CPU isolation 'managed_irq' mask into account.
When the interrupt is finally requested by the device driver then the
affinity is checked again and the CPU isolation 'managed_irq' mask is
taken into account, which moves the interrupt to a non-isolated CPU if
possible.
2) The interrupt can be affine to an isolated CPU because the
non-isolated CPUs in the calculated affinity mask are not online.
Once a non-isolated CPU which is in the mask comes online the
interrupt is migrated to this non-isolated CPU
In both cases the regular online migration mechanism is used which triggers
the WARN_ON_ONCE() in free_moved_vector().
Case #1 could have been addressed by taking the isolation mask into
account, but that would require a massive code change in the activation
logic and the eventual migration event was accepted as a reasonable
tradeoff when the isolation feature was developed. But even if #1 would be
addressed, #2 would still trigger it.
Of course the warning in free_moved_vector() was overlooked at that time
and the above two cases which have been discussed during patch review have
obviously never been tested before the final submission.
So keep it simple and remove the warning.
[ tglx: Rewrote changelog and added a comment to free_moved_vector() ]
Fixes: 11ea68f553 ("genirq, sched/isolation: Isolate from handling managed interrupts")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com
Pull crypto fix from Herbert Xu:
"Fix a build problem with x86/curve25519"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/curve25519 - support assemblers with no adx support
Both call sites that access kmmio_ctx, access kmmio_ctx with interrupts
disabled. There is no need to use get_cpu_var() which additionally
disables preemption.
Use this_cpu_ptr() to access the kmmio_ctx variable of the current CPU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200205143426.2592512-1-bigeasy@linutronix.de
Enable the sampling check in kernel/events/core.c::perf_event_open(),
which returns the more appropriate -EOPNOTSUPP.
BEFORE:
$ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (l3_request_g1.caching_l3_cache_accesses).
/bin/dmesg | grep -i perf may provide additional information.
With nothing relevant in dmesg.
AFTER:
$ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true
Error:
l3_request_g1.caching_l3_cache_accesses: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
Fixes: c43ca5091a ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200311191323.13124-1-kim.phillips@amd.com
Every time a new architecture defines the IMA architecture specific
functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
include file needs to be updated. To avoid this "noise", this patch
defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
the different architectures to select it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Philipp Rudo <prudo@linux.ibm.com> (s390)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Family 19h CPUs are Zen-based and still share most architectural
features with Family 17h CPUs, and therefore still need to call
init_amd_zn() e.g., to set the RECLAIM_DISTANCE override.
init_amd_zn() also sets X86_FEATURE_ZEN, which today is only used
in amd_set_core_ssb_state(), which isn't called on some late
model Family 17h CPUs, nor on any Family 19h CPUs:
X86_FEATURE_AMD_SSBD replaces X86_FEATURE_LS_CFG_SSBD on those
later model CPUs, where the SSBD mitigation is done via the
SPEC_CTRL MSR instead of the LS_CFG MSR.
Family 19h CPUs also don't have the erratum where the CPB feature
bit isn't set, but that code can stay unchanged and run safely
on Family 19h.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200311191451.13221-1-kim.phillips@amd.com
The "Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 4:
Model-Specific Registers" has the following table for the values from
freq_desc_byt:
000B: 083.3 MHz
001B: 100.0 MHz
010B: 133.3 MHz
011B: 116.7 MHz
100B: 080.0 MHz
Notice how for e.g the 83.3 MHz value there are 3 significant digits, which
translates to an accuracy of a 1000 ppm, where as a typical crystal
oscillator is 20 - 100 ppm, so the accuracy of the frequency format used in
the Software Developer’s Manual is not really helpful.
As far as we know Bay Trail SoCs use a 25 MHz crystal and Cherry Trail
uses a 19.2 MHz crystal, the crystal is the source clock for a root PLL
which outputs 1600 and 100 MHz. It is unclear if the root PLL outputs are
used directly by the CPU clock PLL or if there is another PLL in between.
This does not matter though, we can model the chain of PLLs as a single PLL
with a quotient equal to the quotients of all PLLs in the chain multiplied.
So we can create a simplified model of the CPU clock setup using a
reference clock of 100 MHz plus a quotient which gets us as close to the
frequency from the SDM as possible.
For the 83.3 MHz example from above this would give 100 MHz * 5 / 6 = 83
and 1/3 MHz, which matches exactly what has been measured on actual
hardware.
Use a simplified PLL model with a reference clock of 100 MHz for all Bay
and Cherry Trail models.
This has been tested on the following models:
CPU freq before: CPU freq after:
Intel N2840 2165.800 MHz 2166.667 MHz
Intel Z3736 1332.800 MHz 1333.333 MHz
Intel Z3775 1466.300 MHz 1466.667 MHz
Intel Z8350 1440.000 MHz 1440.000 MHz
Intel Z8750 1600.000 MHz 1600.000 MHz
This fixes the time drifting by about 1 second per hour (20 - 30 seconds
per day) on (some) devices which rely on the tsc_msr.c code to determine
the TSC frequency.
Reported-by: Vipul Kumar <vipulk0511@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-3-hdegoede@redhat.com
According to the "Intel 64 and IA-32 Architectures Software Developer's
Manual Volume 4: Model-Specific Registers" on Cherry Trail (Airmont)
devices the 4 lowest bits of the MSR_FSB_FREQ mask indicate the bus freq
unlike on e.g. Bay Trail where only the lowest 3 bits are used.
This is also the reason why MAX_NUM_FREQS is defined as 9, since Cherry
Trail SoCs have 9 possible frequencies, so the lo value from the MSR needs
to be masked with 0x0f, not with 0x07 otherwise the 9th frequency will get
interpreted as the 1st.
Bump MAX_NUM_FREQS to 16 to avoid any possibility of addressing the array
out of bounds and makes the mask part of the cpufreq struct so it can be
set it per model.
While at it also log an error when the index points to an uninitialized
part of the freqs lookup-table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-2-hdegoede@redhat.com
Modern x86 laptops are starting to use GPIO pins as interrupts more
and more, e.g. touchpads and touchscreens have almost all moved away
from PS/2 and USB to using I2C with a GPIO pin as interrupt.
Modern x86 laptops also have almost all moved to using s2idle instead
of using the system S3 ACPI power state to suspend.
The Intel and AMD pinctrl drivers do not define irq_retrigger handlers
for the irqchips they register, this is causing edge triggered interrupts
which happen while suspended using s2idle to get lost.
One specific example of this is the lid switch on some devices, lid
switches used to be handled by the embedded-controller, but now the
lid open/closed sensor is sometimes directly connected to a GPIO pin.
On most devices the ACPI code for this looks like this:
Method (_E00, ...) {
Notify (LID0, 0x80) // Status Change
}
Where _E00 is an ACPI event handler for changes on both edges of the GPIO
connected to the lid sensor, this event handler is then combined with an
_LID method which directly reads the pin. When the device is resumed by
opening the lid, the GPIO interrupt will wake the system, but because the
pinctrl irqchip doesn't have an irq_retrigger handler, the Notify will not
happen. This is not a problem in the case the _LID method directly reads
the GPIO, because the drivers/acpi/button.c code will call _LID on resume
anyways.
But some devices have an event handler for the GPIO connected to the
lid sensor which looks like this:
Method (_E00, ...) {
if (LID_GPIO == One)
LIDS = One
else
LIDS = Zero
Notify (LID0, 0x80) // Status Change
}
And the _LID method returns the cached LIDS value, since on open we
do not re-run the edge-interrupt handler when we re-enable IRQS on resume
(because of the missing irq_retrigger handler), _LID now will keep
reporting closed, as LIDS was never changed to reflect the open status,
this causes userspace to re-resume the laptop again shortly after opening
the lid.
The Intel GPIO controllers do not allow implementing irq_retrigger without
emulating it in software, at which point we are better of just using the
generic HARDIRQS_SW_RESEND mechanism rather then re-implementing software
emulation for this separately in aprox. 14 different pinctrl drivers.
Select HARDIRQS_SW_RESEND to solve the problem of edge-triggered GPIO
interrupts not being re-triggered on resume when they were triggered during
suspend (s2idle) and/or when they were the cause of the wakeup.
This requires
008f1d60fe ("x86/apic/vector: Force interupt handler invocation to irq context")
c16816acd0 ("genirq: Add protection against unsafe usage of generic_handle_irq()")
to protect the APIC based interrupts from being wreckaged by a software
resend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200123210242.53367-1-hdegoede@redhat.com
The dmidecode program fails to properly decode the SMBIOS data supplied
by OVMF/UEFI when running in an SEV guest. The SMBIOS area, under SEV, is
encrypted and resides in reserved memory that is marked as EFI runtime
services data.
As a result, when memremap() is attempted for the SMBIOS data, it
can't be mapped as regular RAM (through try_ram_remap()) and, since
the address isn't part of the iomem resources list, it isn't mapped
encrypted through the fallback ioremap().
Add a new __ioremap_check_other() to deal with memory types like
EFI_RUNTIME_SERVICES_DATA which are not covered by the resource ranges.
This allows any runtime services data which has been created encrypted,
to be mapped encrypted too.
[ bp: Move functionality to a separate function. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org> # 5.3
Link: https://lkml.kernel.org/r/2d9e16eb5b53dc82665c95c6764b7407719df7a0.1582645327.git.thomas.lendacky@amd.com
fmod_ret progs are emitted as:
start = __bpf_prog_enter();
call fmod_ret
*(u64 *)(rbp - 8) = rax
__bpf_prog_exit(, start);
test eax, eax
jne do_fexit
That 'test eax, eax' is working by accident. The compiler is free to use rax
inside __bpf_prog_exit() or inside functions that __bpf_prog_exit() is calling.
Which caused "test_progs -t modify_return" to sporadically fail depending on
compiler version and kconfig. Fix it by using 'cmp [rbp - 8], 0' instead of
'test eax, eax'.
Fixes: ae24082331 ("bpf: Introduce BPF_MODIFY_RETURN")
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200311003906.3643037-1-ast@kernel.org
We have had a hard coded limit of 32 machine check records since the
dawn of time. But as numbers of cores increase, it is possible for
more than 32 errors to be reported before a user process reads from
/dev/mcelog. In this case the additional errors are lost.
Keep 32 as the minimum. But tune the maximum value up based on the
number of processors.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200218184408.GA23048@agluck-desk2.amr.corp.intel.com
Add a new structure (hv_msi_entry), which is also defined in the TLFS,
to describe the msi entry for HVCALL_RETARGET_INTERRUPT. The structure
is needed because its layout may be different from architecture to
architecture.
Also add a new generic interface hv_set_msi_entry_from_desc() to allow
different archs to set the msi entry from msi_desc.
No functional change, only preparation for the future support of virtual
PCI on non-x86 architectures.
Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Currently, retarget_msi_interrupt and other structures it relys on are
defined in pci-hyperv.c. However, those structures are actually defined
in Hypervisor Top-Level Functional Specification [1] and may be
different in sizes of fields or layout from architecture to
architecture. Let's move those definitions into x86's tlfs header file
to support virtual PCI on non-x86 architectures in the future. Note that
"__packed" attribute is added to these structures during the movement
for the same reason as we use the attribute for other TLFS structures in
the header file: make sure the structures meet the specification and
avoid anything unexpected from the compilers.
Additionally, rename struct retarget_msi_interrupt to
hv_retarget_msi_interrupt for the consistent naming convention, also
mirroring the name in TLFS.
[1]: https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Currently HVCALL_RETARGET_INTERRUPT and HV_PARTITION_ID_SELF are defined
in pci-hyperv.c. However, similar to other hypercall related
definitions, it makes more sense to put them in the tlfs header file.
Besides, these definitions are arch-dependent, so for the support of
virtual PCI on non-x86 archs in the future, move them into arch-specific
tlfs header file.
Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Sathyanarayanan reported that the PCI-E AER error injection mechanism
can result in a NULL pointer dereference in apic_ack_edge():
BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
RIP: 0010:apic_ack_edge+0x1e/0x40
Call Trace:
handle_edge_irq+0x7d/0x1e0
generic_handle_irq+0x27/0x30
aer_inject_write+0x53a/0x720
It crashes in irq_complete_move() which dereferences get_irq_regs() which
is obviously NULL when this is called from non interrupt context.
Of course the pointer could be checked, but that just papers over the real
issue. Invoking the low level interrupt handling mechanism from random code
can wreckage the fragile interrupt affinity mechanism of x86 as interrupts
can only be moved in interrupt context or with special care when a CPU goes
offline and the move has to be enforced.
In the best case this triggers the warning in the MSI affinity setter, but
if the call happens on the correct CPU it just corrupts state and might
prevent further interrupt delivery for the affected device.
Mark the APIC interrupts as unsuitable for being invoked in random contexts.
This prevents the AER injection from proliferating the wreckage, but that's
less broken than the current state of affairs and more correct than just
papering over the problem by sprinkling random checks all over the place
and silently corrupting state.
Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200306130623.684591280@linutronix.de
The following commit:
223e3ee56f ("efi/x86: add headroom to decompressor BSS to account for setup block")
added headroom to the PE image to account for the setup block, which
wasn't used for the decompression buffer.
Now that the decompression buffer is located at the start of the image,
and includes the setup block, this is no longer required.
Add a check to make sure that the head section of the compressed kernel
won't overwrite itself while relocating. This is only for
future-proofing as with current limits on the setup and the actual size
of the head section, this can never happen.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-19-ardb@kernel.org
code32_start is meant for 16-bit real-mode bootloaders to inform the
kernel where the 32-bit protected mode code starts. Nothing in the
protected mode kernel except the EFI stub uses it.
efi_main() currently returns boot_params, with code32_start set inside it
to tell efi_stub_entry() where startup_32 is located. Since it was invoked
by efi_stub_entry() in the first place, boot_params is already known.
Return the address of startup_32 instead.
This will allow a 64-bit kernel to live above 4Gb, for example, and it's
cleaner as well.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-13-ardb@kernel.org
More EFI updates for v5.7
- Incorporate a stable branch with the EFI pieces of Hans's work on
loading device firmware from EFI boot service memory regions
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current x32 BPF JIT is incorrect for JMP32 JSET BPF_X when the upper
32 bits of operand registers are non-zero in certain situations.
The problem is in the following code:
case BPF_JMP | BPF_JSET | BPF_X:
case BPF_JMP32 | BPF_JSET | BPF_X:
...
/* and dreg_lo,sreg_lo */
EMIT2(0x23, add_2reg(0xC0, sreg_lo, dreg_lo));
/* and dreg_hi,sreg_hi */
EMIT2(0x23, add_2reg(0xC0, sreg_hi, dreg_hi));
/* or dreg_lo,dreg_hi */
EMIT2(0x09, add_2reg(0xC0, dreg_lo, dreg_hi));
This code checks the upper bits of the operand registers regardless if
the BPF instruction is BPF_JMP32 or BPF_JMP64. Registers dreg_hi and
dreg_lo are not loaded from the stack for BPF_JMP32, however, they can
still be polluted with values from previous instructions.
The following BPF program demonstrates the bug. The jset64 instruction
loads the temporary registers and performs the jump, since ((u64)r7 &
(u64)r8) is non-zero. The jset32 should _not_ be taken, as the lower
32 bits are all zero, however, the current JIT will take the branch due
the pollution of temporary registers from the earlier jset64.
mov64 r0, 0
ld64 r7, 0x8000000000000000
ld64 r8, 0x8000000000000000
jset64 r7, r8, 1
exit
jset32 r7, r8, 1
mov64 r0, 2
exit
The expected return value of this program is 2; under the buggy x32 JIT
it returns 0. The fix is to skip using the upper 32 bits for jset32 and
compare the upper 32 bits for jset64 only.
All tests in test_bpf.ko and selftests/bpf/test_verifier continue to
pass with this change.
We found this bug using our automated verification tool, Serval.
Fixes: 69f827eb6e ("x32: bpf: implement jitting of JMP32")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200305234416.31597-1-luke.r.nels@gmail.com
