Additional checks for valid DAIs expose a corner case, where existing
BE dailinks get modified, e.g. HDMI links are tagged with
dpcm_capture=1 even if the DAIs are for playback.
This patch makes those changes conditional and flags configuration
issues when a BE dailink is has no_pcm=0 but dpcm_playback or
dpcm_capture=1 (which makes no sense).
As discussed on the alsa-devel mailing list, there are redundant flags
for dpcm_playback, dpcm_capture, playback_only, capture_only. This
will have to be cleaned-up in a future update. For now only correct
and flag problematic configurations.
Fixes: 218fe9b7ec ("ASoC: soc-core: Set dpcm_playback / dpcm_capture")
Suggested-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have bit field to control snd_soc_card.
Let's add "probed" field on it instead of local variable.
One note here is that soc_cleanup_card_resources()
will be called as (A) formal cleanup or as (B) error handling,
thus, it needs to distinguish these.
In (A) case, card will have "instantiated" flag if all probe
callback functions were called without error.
Thus, snd_soc_unbind_card() is using it to judging card was probed.
But this this patch removes it, because it is no longer needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1v4zv36.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Decrease the dmesg verbosity to remove unnecessary logs on SoundWire
platforms, and conversely add more information to help the community
and downstream distros with HDaudio/SOF support (DMIC detection and card
instanciation are the most prevalent issues on GitHub).
Pierre-Louis Bossart (3):
ASoC: codecs: rt1308-sdw: reduce verbosity
ASoC: SOF: Intel: hda: reduce verbosity on SoundWire detection
ASoC: SOF: Intel: hda: log number of microphones detected in NHLT
tables
Ranjani Sridharan (1):
ASoC: soc-core: Add dynamic debug logs in soc_dai_link_sanity_check()
sound/soc/codecs/rt1308-sdw.c | 4 ++--
sound/soc/soc-core.c | 18 +++++++++++++++---
sound/soc/sof/intel/hda.c | 10 ++++++----
3 files changed, 23 insertions(+), 9 deletions(-)
base-commit: dd8e871d4e
--
2.20.1
ALSA SoC is currently categorizing CPU/Codec DAIs,
and it works well.
But modern devices require more complex connections,
for example Codec to Codec, etc, and future devices will
enable to more complex connections.
Because of these background, CPU/Codec DAIs categorizing is
no longer good much to modern device.
Currently, rtd has both CPU/Codec DAIs pointer.
rtd->cpu_dais = [][][][][][][][][]
rtd->codec_dais = [][][][][][][][][]
This patch merges these into DAIs pointer.
rtd->dais = [][][][][][][][][][][][][][][][][][]
^cpu_dais ^codec_dais
|--- num_cpus ---|--- num_codecs --|
Then, we can merge for_each_rtd_cpu/codec_dais() from this patch.
- for_each_rtd_cpu_dais() {
- ...
- }
- for_each_rtd_codec_dais() {
- ...
- }
+ for_each_rtd_dais() {
+ ...
+ }
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wo7kolfa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes,
which results in the ASoC card probe failing.
Introduce a flag to be set in machine drivers to prevent the probe
from stopping in case of incomplete topologies or missing routes. This
flag is for backwards compatibility only and shall not be used for
newer machine drivers.
Example with an HDaudio card with a bad topology:
[ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19
with the disable_route_checks set:
[ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: disable_route_checks set, ignoring errors on
add_routes
Fixes: daa480bde6 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200309192744.18380-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC core supports multiple codec DAIs but supports only a CPU DAI.
To support multiple cpu DAIs, add cpu_dai and num_cpu_dai in
snd_soc_dai_link and snd_soc_pcm_runtime structures similar to
support for codec_dai. This is intended as a preparatory patch to
eventually support the unification of the Codec and CPU DAI.
Inline with multiple codec DAI approach, add support to allocate,
init, bind and probe multiple cpu_dai on init if driver specifies
that. Also add support to loop over multiple cpu_dai during
suspend and resume.
This is intended as a preparatory patch to eventually unify the CPU
and Codec DAI into DAI components.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Link: https://lore.kernel.org/r/20200225133917.21314-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit b2354e4009.
This change might have been desirable to ensure the uniqueness of
the component name. It would have helped to better support linux
devices which register multiple components, something is which more
common than initially thought.
However, some card driver are directly using dev_name() to fill the
component names of the dai_link which is a problem if want to change
the way ASoC generates the component names.
Until we figure out the appropriate way to deal with this, revert the
change and keep the names as they were. There might be a couple of warning
related to debugfs (which were already present before the change) but it
is still better than breaking working audio cards.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200219102526.692126-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure each ASoC component is registered with a unique name.
The component is derived from the device name. If a device registers more
than one component, the component names will be the same.
This usually brings up a warning about the debugfs directory creation of
the component since directory already exists.
In such case, start numbering the component of the device so the names
don't collide anymore.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200214134704.342501-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, querying the dai_name will stop of the first component
matching the dt node. This does not allow a device (single dt node) to
provide several ASoC components which could then be used through DT.
This change let the search go on if the xlate function of the component
returns an error, giving the possibility to another component to match
and return the dai_name.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200213155159.3235792-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Historically, CPU and Codec were implemented different, but now it is
merged as Component.
ALSA SoC is supporting suspend/resume at DAI and Component level.
The method is like below.
1) Suspend/Resume all CPU DAI if bus-control was 0
2) Suspend/Resume all Component
3) Suspend/Resume all CPU DAI if bus-control was 1
Historically 2) was Codec special operation.
Because CPU and Codec were merged into Component,
CPU suspend/resume has 3 chance to suspend(= 1/2/3), but
Codec suspend/resume has 1 chance (= 2).
Here, DAI side suspend/resume is caring bus-control, but no driver
which is supporting suspend/resume is setting bus-control.
This means 3) was never used.
Here, used parameter for suspend/resume component->dev and dai->dev are
same pointer.
For that reason, we can merge DAI and Component suspend/resume.
One note is that we should use 2), because it is caring BIAS level.
This patch removes 1) and 3).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1zvx7i8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC need to care pinctrl_pm_select_xxx().
It is called at soc-core and soc-pcm.
soc-pcm is controlling it for activate DAI.
soc-core is controlling it for whole system
(= suspend/resume/probe/poweroff).
If we focus to soc-core side, it need to care about BIAS level.
Then, snd_soc_suspend() only is controlling it by Component base (a).
Other functions are DAI base (b).
(a) pinctrl_pm_select_xxx(component->dev, xxx);
(b) pinctrl_pm_select_xxx(dai->dev, xxx);
Because of these unbalance, the code is confusable.
Here, dai->dev and component->dev are same pointer.
Thus, we can replace it component base.
One note here is that it cared DAI (= CPU/Codec) pin before this patch,
after this patch, it cares Component (= CPU/Codec/Platform) pin.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874kx4t4v6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_suspend() are doing below for pinctrl_pm_select_sleep_state()
int snd_soc_suspend(struct device *dev)
{
...
for_each_card_components(card, component) {
...
(1) pinctrl_pm_select_sleep_state(component->dev);
}
for_each_card_rtds(card, rtd) {
...
(2) pinctrl_pm_select_sleep_state(cpu_dai->dev);
}
}
(1) is called for all component (CPU/Codec/Platform), and
(2) is called for CPU DAIs.
Here, component->dev is same as dai->dev.
This means, it is called in duplicate on CPU case.
This patch removes (2).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zhkt4vc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is using struct snd_soc_rtdcom_list to
connecting component to rtd by using list_head.
struct snd_soc_rtdcom_list {
struct snd_soc_component *component;
struct list_head list; /* rtd::component_list */
};
struct snd_soc_pcm_runtime {
...
struct list_head component_list; /* list of connected components */
...
};
The CPU/Codec/Platform component which will be connected to rtd (a)
is indicated via dai_link at snd_soc_add_pcm_runtime()
int snd_soc_add_pcm_runtime(...)
{
...
/* Find CPU from registered CPUs */
rtd->cpu_dai = snd_soc_find_dai(dai_link->cpus);
...
(a) snd_soc_rtdcom_add(rtd, rtd->cpu_dai->component);
...
/* Find CODEC from registered CODECs */
(b) for_each_link_codecs(dai_link, i, codec) {
rtd->codec_dais[i] = snd_soc_find_dai(codec);
...
(a) snd_soc_rtdcom_add(rtd, rtd->codec_dais[i]->component);
}
...
/* Find PLATFORM from registered PLATFORMs */
(b) for_each_link_platforms(dai_link, i, platform) {
for_each_component(component) {
...
(a) snd_soc_rtdcom_add(rtd, component);
}
}
}
It shows, it is possible to know how many components will be
connected to rtd by using
dai_link->num_cpus
dai_link->num_codecs
dai_link->num_platforms
If so, we can use component pointer array instead of list_head,
in such case, code can be more simple.
This patch removes struct snd_soc_rtdcom_list that is only
of temporary value, and convert to pointer array.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a76wt4wm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error path of soc_new_pcm_runtime() invokes soc_free_pcm_runtime()
that may cause a few problems. First off, it calls list_del() for
rtd->list that may not be initialized. Similarly,
snd_soc_pcm_component_free() traverses over the component list that
may not be initialized, either. Such access to the uninitialized list
head would lead to either a BUG_ON() or a memory corruption.
This patch fixes the access to uninitialized list heads by
initializing the list heads properly at the beginning before those
error paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204151454.21643-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When converting a normal link to a DPCM link we need
to set dpcm_playback / dpcm_capture otherwise playback/capture
streams will not be created resulting in errors like this:
[ 36.039111] sai1-wm8960-hifi: ASoC: no backend playback stream
Fixes: a655de808c ("ASoC: core: Allow topology to override machine driver FE DAI link config")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20191204151333.26625-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
