Driver Changes:
- Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on
Iris Plus 655 and 4K screen (Chris)
- Add Wa_14011059788 for Tigerlake (Matt A)
- Add per ctx batchbuffer wa for timestamp for Gen12 (Mika)
- Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption (Mika)
- Enable DP Display Audio WA (Uma, Jani)
- Update forcewake firmware ranges for Icelake (Radhakrishna)
- Add missing deinitialization cases of load failure for display (Jose)
- Implement TC cold sequences for Icelake and Tigerlake (Jose)
- Unbreak enable_dpcd_backlight modparam (Lyude)
- Move the late flush_submission in retire to the end (Chris)
- Demote "Reducing compressed framebufer size" message to info (Peter)
- Push MST link retraining to the hotplug work (Ville)
- Hold obj->vma.lock over for_each_ggtt_vma() (Chris)
- Fix timeout handling during TypeC AUX power well enabling for ICL (Imre)
- Fix skl+ non-scaled pfit modes (Ville)
- Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris)
- Sanitize GT first before poisoning HWSP (Chris)
- Fix up clock RPS frequency readout (Chris)
- Avoid reusing the same logical CCID (Chris)
- Avoid dereferencing a dead context (Chris)
- Always enable busy-stats for execlists (Chris)
- Apply the aggressive downclocking to parking (Chris)
- Restore aggressive post-boost downclocking (Chris)
- Scrub execlists state on resume (Chris)
- Add debugfs attributes for LPSP (Ansuman)
- Improvements to kernel selftests (Chris, Mika)
- Add tiled blits selftest (Zbigniew)
- Fix error handling in __live_lrc_indirect_ctx_bb() (Dan)
- Add pre/post plane updates for SAGV (Stanislav)
- Add ICL PG3 PW ID for EHL (Anshuman)
- Fix Sphinx build duplicate label warning (Jani)
- Error log non-zero audio power refcount after unbind (Jani)
- Remove object_is_locked assertion from unpin_from_display_plane (Chris)
- Use single set of AUX powerwell ops for gen11+ (Matt R)
- Prefer drm_WARN_ON over WARN_ON (Pankaj)
- Poison residual state [HWSP] across resume (Chris, Tvrtko)
- Convert request-before-CS assertion to debug (Chris)
- Carefully order virtual_submission_tasklet (Chris)
- Check carefully for an idle engine in wait-for-idle (Chris)
- Only close vma we open (Chris)
- Trace RPS events (Chris)
- Use the RPM config register to determine clk frequencies (Chris)
- Drop rq->ring->vma peeking from error capture (Chris)
- Check preempt-timeout target before submit_ports (Chris)
- Check HWSP cacheline is valid before acquiring (Chris)
- Use proper fault mask in interrupt postinstall too (Matt R)
- Keep a no-frills swappable copy of the default context state (Chris)
- Add atomic helpers for bandwidth (Stanislav)
- Refactor setting dma info to a common helper from device info (Michael)
- Refactor DDI transcoder code for clairty (Ville)
- Extend PG3 power well ID to ICL (Anshuman)
- Refactor PFIT code for readability and future extensibility (Ville)
- Clarify code split between intel_ddi.c and intel_dp.c (Ville)
- Move out code to return the digital_port of the aux ch (Jose)
- Move rps.enabled/active and use of RPS interrupts to flags (Chris)
- Remove superfluous inlines and dead code (Jani)
- Re-disable -Wframe-address from top-level Makefile (Nick)
- Static checker and spelling fixes (Colin, Nathan)
- Split long lines (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430124904.GA100924@jlahtine-desk.ger.corp.intel.com
drm-misc-next for 5.8:
UAPI Changes:
Cross-subsystem Changes:
* MAINTAINERS: restore alphabetical order; update cirrus driver
* Dcomuentation: document visionix, chronteli, ite vendor prefices; update
documentation for Chrontel CH7033, IT6505, IVO, BOE,
Panasonic, Chunghwa, AUO bindings; convert dw_mipi_dsi.txt
to YAML; remove todo item for drm_display_mode.hsync removal;
Core Changes:
* drm: add devm_drm_dev_alloc() for managed allocations of drm_device;
use DRM_MODESET_LOCK_ALL_*() in mode-object code; remove
drm_display_mode.hsync; small cleanups of unused variables,
compiler warnings and static functions
* drm/client: dual-lincensing: GPL-2.0 or MIT
* drm/mm: optimize tree searches in rb_hole_addr()
Driver Changes:
* drm/{many}: use devm_drm_dev_alloc(); don't use drm_device.dev_private
* drm/ast: don't double-assign to drm_crtc_funcs.set_config; drop
drm_connector_register()
* drm/bochs: drop drm_connector_register()
* drm/bridge: add support for Chrontel ch7033; fix stack usage with
old gccs; return error pointer in drm_panel_bridge_add()
* drm/cirrus: Move to tiny
* drm/dp_mst: don't use 2nd sideband tx slot; revert "Remove single tx
msg restriction"
* drm/lima: support runtime PM;
* drm/meson: limit modes wrt chipset
* drm/panel: add support for Visionox rm69299; fix clock on
boe-tv101wum-n16; fix panel type for AUO G101EVN10;
add support for Ivo M133NFW4 R0; add support for BOE
NV133FHM-N61; add support for AUO G121EAN01.4, G156XTN01.0,
G190EAN01
* drm/pl111: improve vexpress init; fix module auto-loading
* drm/stm: read number of endpoints from device tree
* drm/vboxvideo: use managed PCI functions; drop DRM_MTRR_WC
* drm/vkms: fix use-after-free in vkms_gem_create(); enable cursor
support by default
* fbdev: use boolean values in several drivers
* fbdev/controlfb: fix COMPILE_TEST
* fbdev/w100fb: fix double-free bug
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507072503.GA10979@linux-uq9g
drm-misc-next for 5.8:
UAPI Changes:
- drm: error out with EBUSY when device has existing master
- drm: rework SET_MASTER and DROP_MASTER perm handling
Cross-subsystem Changes:
- mm: export two symbols from slub/slob
- fbdev: savage: fix -Wextra build warning
- video: omap2: Use scnprintf() for avoiding potential buffer overflow
Core Changes:
- Remove drm_pci.h
- drm_pci_{alloc/free)() are now legacy
- Introduce managed DRM resourcesA
- Allow drivers to subclass struct drm_framebuffer
- Introduce struct drm_afbc_framebuffer and helpers
- fbdev: remove return value from generic fbdev setup
- Introduce simple-encoder helper
- vram-helpers: set fence on plane
- dp_mst: ACT timeout improvements
- dp_mst: Remove drm_dp_mst_has_audio()
- TTM: ttm_trace_dma_{map/unmap}() cleanups
- dma-buf: add flag for PCIP2P support
- EDID: Various improvements
- Encoder: cleanup semantics of possible_clones and possible_crtcs
- VBLANK documentation updates
- Writeback documentation updates
Driver Changes:
- Convert several drivers to i2c_new_client_device()
- Drop explicit drm_mode_config_cleanup() calls from drivers
- Auto-release device structures with drmm_add_final_kfree()
- Init bfdev console after registering DRM device
- Make various .debugfs functions return 0 unconditionally; ignore errors
- video: Use scnprintf() to avoid buffer overflows
- Convert drivers to simple encoders
- drm/amdgpu: note that we can handle peer2peer DMA-buf
- drm/amdgpu: add support for exporting VRAM using DMA-buf v3
- drm/kirin: Revert change to register connectors
- drm/lima: Add optional devfreq and cooling device support
- drm/lima: Various improvements wrt. task handling
- drm/panel: nt39016: Support multiple modes and 50Hz
- drm/panel: Support Leadtek LTK050H3146W
- drm/rockchip: Add support for afbc
- drm/virtio: Various cleanups
- drm/hisilicon/hibmc: Enforce 128-byte stride alignment
- drm/qxl: Fix notify port address of cursor ring buffer
- drm/sun4i: Improvements to format handling
- drm/bridge: dw-hdmi: Various improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 5.7-rc1.
Highlights:
- i915 enables Tigerlake by default
- i915 and amdgpu have initial OLED backlight support
[ Jani Nikula pipes up and points out that we've had a bunch of
"initial support" code for a long time already, but only now
Lyude made it actually work on real world machines ]
- vmwgfx add support to enable OpenGL 4 userspace
- zero length arrays are mostly removed.
Detailed summary:
new driver:
- tidss: TI Keystone platform display subsystem
core:
- new drm device warn macros
- mode config valid for memory constrained devices
- bridge bus format negotation
- consolidated fake vblank event handling
- dma_alloc related cleanups
- drop get_crtc callback
- dp: DP1.4 EDID corruption test
- EDID CEA detailed timings improvements
- relicense some code to dual GPL2/MIT
- convert core vblank support to per-crtc support
- rework drm_global_mutex
- bridge rework to allow omap_dss custom driver removeal
- remove drm_fb_helper connector interrfaces
- zero-length array removal
scheduler:
- support for modifying the sched list
- revert job distribution optimization
- helper to pick least loaded scheduler
- race condition fix
mst:
- various fixes
- remove register_connector callback
i915:
- uapi to allows userspace specific CS ring buffer sizes
- Tigerlake enablement patches + Tigerlake enabled by default
- new sysfs entries for engine properties
- display/logging refactors
- eDP/DP fixes for DPCD
- Gen7 back to aliasing-ppgtt
- Gen8+ irq refactor
- Avoid globals
- GEM locking fixes and simplifications
- Ice Lake and Elkhart Lake fixes and workarounds
- Baytrail/Haswell instability fix
- GVT - VFIO edid better support
amdgpu:
- Rework VM update handling in preparation for HMM support
- drm load/unload removal fixups
- USB-C PD firmware updates
- HDCP srm support
- Navi/renoir PM watermark fixes
- OLED panel support
- Optimize debugging vram access
- Use BACO for runtime pm
- DC clock programming optimizations and fixes
- PSP fw loading sequence updates
- Drop DRIVER_USE_AGP
- Remove legacy drm load and unload callbacks
- ACP Kconfig fix
- Lots of fixes across the driver
amdkfd:
- runtime pm support
- more gfx config details in amdgpu
radeon:
- drop DRIVER_USE_AGP
vmwgfx:
- Disable DMA when SEV encryption in use
- Shader Model 5 support - needed for GL4 support
msm:
- DPU resource manager refactor
- dpu using atomic global state
mediatek:
- MT8183 DPI support
etnaviv:
- out-of-bounds read fix
- expose feature flags for GC400 STM32MP1 SoC
- runtime suspend entry fix
- dma32 zone fix
hisilicon:
- mode selection fixes
meson:
- YUV420 support
lima:
- add support for heap buffers
tinydrm:
- removal of owner field
- explicit DT dependency removal
- YAML schema conversion
tegra:
- misc cleanups
tidss:
- new driver
virtio:
- better batching of notifications to host
- memory handling reworked
- shmem + gpu context fixes
hibmc:
- add gamma_set support
- improve DPMS support
pl111:
- Integrator IM-PD1 support
sun4i:
- LVDS support for A20 + A33
- DSI panel handling improvements"
* tag 'drm-next-2020-04-01' of git://anongit.freedesktop.org/drm/drm: (1537 commits)
drm/i915/display: Fix mode private_flags comparison at atomic_check
drm/i915/gt: Stage the transfer of the virtual breadcrumb
drm/i915/gt: Select the deepest available parking mode for rc6
drm/i915: Avoid live-lock with i915_vma_parked()
drm/i915/gt: Treat idling as a RPS downclock event
drm/i915/gt: Cancel a hung context if already closed
drm/i915: Use explicit flag to mark unreachable intel_context
drm/amdgpu: don't try to reserve training bo for sriov (v2)
drm/amdgpu/smu11: add support for SMU AC/DC interrupts
drm/amdgpu/swSMU: handle manual AC/DC notifications
drm/amdgpu/swSMU: handle DC controlled by GPIO for navi1x
drm/amdgpu/swSMU: set AC/DC mode based on the current system state (v2)
drm/amdgpu/swSMU: correct the bootup power source for Navi1X (v2)
drm/amdgpu/swSMU: use the smu11 power source helper for navi1x
drm/amdgpu/smu11: add a helper to set the power source
drm/amd/swSMU: add callback to set AC/DC power source (v2)
drm/scheduler: fix rare NULL ptr race
drm/amdgpu: fix the coverage issue to clear ArcVPGRs
drm/amd/display: Fix pageflip event race condition for DCN.
drm/[radeon|amdgpu]: Remove HAINAN board from max_sclk override check
...
With this we can drop the final kfree from the release function.
The mock device in the selftests needed it's pci_device split
up from the drm_device. In the future we could simplify this again
by allocating the pci_device as a managed allocation too.
v2: I overlooked that i915_driver_destroy is also called in the
unwind code of the error path. There we need a drm_dev_put.
Similar for the mock object.
Now the problem with that is that the drm_driver->release callbacks
for both the real driver and the mock one assume everything has been
set up. Hence going through that path for a partially set up driver
will result in issues. Quickest fix is to disable the ->release() hook
until the driver is fully initialized, and keep the onion unwinding.
Long term would be cleanest to move everything over to drmm_ release
actions, but that's a lot of work for a big driver like i915. Plus
more core work needed first anyway.
v3: Fix i915_drm pointer wrangling in mock_gem_device. Also switch
over to start using drm_dev_put() to clean up even on the error path.
Aside I think the current error path is leaking the allocation.
v4: more fixes for intel-gfx-ci, some if it damage from v3 :-/
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-9-daniel.vetter@ffwll.ch
For two reasons:
- The driver core clears this already for us after we're unloaded in
__device_release_driver().
- It's way too late, the drm_device ->release callback might massively
outlive the underlying physical device, since a drm_device can be
kept alive by open drm_file or well really anything else userspace
is still hanging onto. So if we clear this ourselves, we should
clear it in the pci ->remove callback, not in the drm_device
->release callback.
Looking at git history this was fixed in the driver core with
commit 0998d06310
Author: Hans de Goede <hdegoede@redhat.com>
Date: Wed May 23 00:09:34 2012 +0200
device-core: Ensure drvdata = NULL when no driver is bound
v2: Cite the core fix in the commit message (Chris).
v3: Fix commit message and unused variable warning (Jani).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-3-daniel.vetter@ffwll.ch
UAPI Changes:
On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties
GVT Changes:
VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.
i915 Changes:
- new UAPI to allow userspace to specify CS ring buffer size on construction
(I915_CONTEXT_PARAM_RINGSIZE) - (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
registers, removing garbage warns, and some other code polishing (Jani, Lucas,
Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314001535.GA2969344@intel.com
Commit 60c6a14b48 ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
[backported to v5.6-rc3]
Fixes: 60c6a14b48 ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Tested-by: Ross Zwisler <zwisler@google.com>
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20200227205540.126135-1-jose.souza@intel.com
(cherry picked from commit df1a5bfc16)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace the sole remaining I915_WRITE() in i915_drv.c with
intel_uncore_write(), although it might be better to keep the entire
file void of direct register access.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225111509.21879-3-jani.nikula@intel.com
- A backmerge of drm-next solving conflicts on i915/gt/intel_lrc.c
- Clean up shadow batch after I915_EXEC_SECURE
- Drop assertion that active->fence is unchanged
Here goes drm-intel-next-2020-02-25:
- A backmerge of drm-next solving conflicts on i915/gt/intel_lrc.c
- Clean up shadow batch after I915_EXEC_SECURE
- Drop assertion that active->fence is unchanged
drm-intel-next-2020-02-24-1:
- RC6 fixes - Chris
- Add extra slice common debug register - Lionel
- Align virtual engines uabi_class/instance with i915_drm.h - Tvrtko
- Avoid potential division by zero in computing CS timestamp - Chris
- Avoid using various globals - Michal Winiarski, Matt Auld
- Break up long lists of GEM object reclaim - Chris
- Check that the vma hasn't been closed before we insert it - Chris
- Consolidate SDVO HDMI force_dvi handling - Ville
- Conversion to new logging and warn macros and functions - Pankaj, Wambul, Chris
- DC3CO fixes - Jose
- Disable use of hwsp_cacheline for kernel_context - Chris
- Display IRQ pre/post uninstall refactor - Jani
- Display port sync refactor for robustness and fixes - Ville, Manasi
- Do not attempt to reprogram IA/ring frequencies for dgfx - Chris
- Drop alpha_support for good in favor of force_probe - Jani
- DSI ACPI related fixes and refactors - Vivek, Jani, Rajat
- Encoder refactor for flexibility to add more information, especiallly DSI related - Jani, Vandita
- Engine workarounds refactor for robustness around resue - Daniele
- FBC simplification and tracepoints
- Various fixes for build - Jani, Kees Cook, Chris, Zhang Xiaoxu
- Fix cmdparser - Chris
- Fix DRM_I915_GEM_MMAP_OFFFSET - Chris
- Fix i915_request flags - Chris
- Fix inconsistency between pfit enable and scaler freeing - Stanislav
- Fix inverted warn_on on display code - Chris
- Fix modeset locks in sanitize_watermarks - Ville
- Fix OA context id overlap with idle context id - Umesh
- Fix pipe and vblank enable for MST - Jani
- Fix VBT handling for timing parameters - Vandita
- Fixes o kernel doc - Chris, Ville
- Force full modeset whenever DSC is enabled at probe - Jani
- Various GEM locking simplification and fixes - Jani , Chris, Jose
- Including some changes in preparation for making GEM execbuf parallel - Chris
- Gen11 pcode error codes - Matt Roper
- Gen8+ interrupt handler refactor - Chris
- Many fixes and improvements around GuC code - Daniele, Michal Wajdeczko
- i915 parameters improvements sfor flexible input and better debugability - Chris, Jani
- Ice Lake and Elkhart Lake Fixes and workarounds - Matt Roper, Jose, Vivek, Matt Atwood
- Improvements on execlists, requests and other areas, fixing hangs and also
improving hang detection, recover and debugability - Chris
- Also introducing offline GT error capture - Chris
- Introduce encoder->compute_config_late() to help MST - Ville
- Make dbuf configuration const - Jani
- Few misc clean ups - Ville, Chris
- Never allow userptr into the new mapping types - Janusz
- Poison rings after use and GTT scratch pages - Chris
- Protect signaler walk with RCU - Chris
- PSR fixes - Jose
- Pull sseu context updates under gt - Chris
- Read rawclk_freq earlier - Chris
- Refactor around VBT handling to allow geting information through the encoder - Jani
- Refactor l3cc/mocs availability - Chris
- Refactor to use intel_connector over drm_connector - Ville
- Remove i915_energy_uJ from debugfs - Tvrtko
- Remove lite restore defines - Mika Kuoppala
- Remove prefault_disable modparam - Chris
- Many selftests fixes and improvements - Chris
- Set intel_dp_set_m_n() for MST slaves - Jose
- Simplify hot plug pin handling and other fixes around pin and polled modes - Ville
- Skip CPU synchronization on dma-buf attachments - chris
- Skip global serialization of clear_range for bxt vtd - Chris
- Skip rmw for marked register - Chris
- Some other GEM Fixes - Chris
- Some small changes for satisfying static code analysis - Colin, Chris
- Suppress warnings for unused debugging locals
- Tiger Lake enabling, including re-enable -f RPS, workarounds and other display fixes and changes - Chris, Matt Roper, Mika Kuoppala, Anshuman, Jose, Radhakrishna, Rafael.
- Track hw reported context runtime - Tvrtko
- Update bug filling URL - Jani
- Use async bind for PIN_USER into bsw/bxt ggtt - Chris
- Use the kernel_context to measuer the breadcrumb size - Chris
- Userptr fixes and robustness for big pages - Matt Auld
- Various Display refactors and clean-ups, specially around logs and use of drm_i915_private - Jani, Ville
- Various display refactors and fixes, especially around cdclk, modeset, and encoder - Chris, Jani
- Various eDP/DP fixes around DPCD - Lyude
- Various fixes and refactors for better Display watermark handling - Ville, Stanislav
- Various other display refactors - Ville
- Various refactor for better handling of display plane states - Ville
- Wean off drm_pci_alloc/drm_pci_free - Chris
- Correctly terminate connector iteration- Ville
- Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt - Chris
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225185853.GA3282832@intel.com
Commit 60c6a14b48 ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
Fixes: 60c6a14b48 ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Tested-by: Ross Zwisler <zwisler@google.com>
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
drm-misc-next for 5.7:
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Move vga switcheroo and dsm handler register later in
i915_driver_register(), and unregister in i915_driver_unregister(). The
dsm handler unregister is a nop, and is only added for completeness.
My unsubstantiated suspicion is that the vga switcheroo state change
would not work as early as we register the hooks currently. In any case
exposing the interfaces to the world only after we've got everything set
up seems prudent.
Also replace the error handling in vga switcheroo register with a simple
error message. This is done at the same time due to lack of error
propagation from i915_driver_register().
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211162802.16180-1-jani.nikula@intel.com
VBLANK callbacks in struct drm_driver are deprecated in favor of their
equivalents in struct drm_crtc_funcs. Convert i915 over.
The callback struct drm_driver.get_scanout_position() is deprecated
in favor of struct drm_crtc_helper_funcs.get_scanout_position().
i915 doesn't use CRTC helpers. Instead pass i915's implementation of
get_scanout_position() to DRM core's
drm_crtc_vblank_helper_get_vblank_timestamp_internal().
v3:
* rename dcrtc to _crtc
* use intel_ prefix for i915_crtc_get_vblank_timestamp()
* update for drm_crtc_vblank_helper_get_vblank_timestamp_internal()
v2:
* use DRM's implementation of get_vblank_timestamp()
* simplify function names
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-8-tzimmermann@suse.de
Converts various instances of the printk drm logging macros to the
struct drm_device based logging macros in the drm/i915 folder using the
following coccinelle script that transforms based on the existence of
the struct drm_i915_private device pointer:
@@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were fixed manually.
Instances of the DRM_DEBUG macro were not converted due to lack of a
consensus of an analogous struct drm_device based macro.
References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131093416.28431-2-wambui.karugax@gmail.com
The file is not part of the global drm resource and can be released
prior to take the global mutex to drop the open_count (and potentially
close) the drm device. As the global mutex is indeed global, not only
within the device but across devices, a slow file release mechanism can
bottleneck the entire system.
However, inside drm_close_helper() there are a number of dev->driver
callbacks that take the drm_device as the first parameter... Worryingly
some of those callbacks may be (implicitly) depending on the global
mutex.
v2: Drop the debug message for the open-count, it's included with the
drm_file_free() debug message -- and for good measure make that up as
reading outside of the mutex.
v3: Separate the calling of the filp cleanup outside of
drm_global_mutex into a new drm_release_noglobal() hook, so that we can
phase the transition. drm/savage relies on the global mutex, and there
may be more, so be cautious.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124125627.125042-1-chris@chris-wilson.co.uk
In commit d03b224f42 ("drm/i915/gt: Apply sanitiization just before
resume") the GT sanitization was pulled into the resume path as we need
to know the backend in order to do a full reset prior to resume.
However, it is still imperative that we scrub existing GPU state before
clobbering in our early setup, so restore a minimal GPU reset at the
start of our init sequence.
Fixes: d03b224f42 ("drm/i915/gt: Apply sanitiization just before resume")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191228111255.3086901-1-chris@chris-wilson.co.uk
