The generated files udpgso* shouldn't be part of TEST_PROGS, they are
used by udpgso.sh and udpgsp_bench.sh. They should be added to the
TEST_GEN_FILES to get installed without being added to the main
run_kselftest.sh script.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test fails to work if reverse-path filtering is in effect on the
mirrored-to host interface, or for all interfaces.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of hand-managing the sysctl set and restore, use the wrappers
sysctl_set() and sysctl_restore() to do the bookkeeping automatically.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two helper functions: sysctl_set() to change the value of a given
sysctl setting, and sysctl_restore() to change it back to what it was.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit a511858c75 ("selftests: fib_tests: Allow user to run
a specific test"), allow user to run only a subset of the tests using
the TESTS environment variable.
This is useful when not all the tests can pass on a given system.
Example:
# export TESTS="ping_ipv4 ping_ipv6"
# ./bridge_vlan_aware.sh
TEST: ping [PASS]
TEST: ping6 [PASS]
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We sometimes observe failures in the test due to too large discrepancy
between the measured and expected ratios. For example:
TEST: ECMP [FAIL]
Too large discrepancy between expected and measured ratios
INFO: Expected ratio 1.00 Measured ratio 1.11
Fix this by allowing an up to 15% deviation between both ratios.
Another possibility is to increase the number of generated flows, but
this will prolong the execution time of the test, which is already quite
high.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After prior kernel change, mmap() on TCP socket only reserves VMA.
We have to use getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...)
to perform the transfert of pages from skbs in TCP receive queue into such VMA.
struct tcp_zerocopy_receive {
__u64 address; /* in: address of mapping */
__u32 length; /* in/out: number of bytes to map/mapped */
__u32 recv_skip_hint; /* out: amount of bytes to skip */
};
After a successful getsockopt(...TCP_ZEROCOPY_RECEIVE...), @length contains
number of bytes that were mapped, and @recv_skip_hint contains number of bytes
that should be read using conventional read()/recv()/recvmsg() system calls,
to skip a sequence of bytes that can not be mapped, because not properly page
aligned.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These tests set up mirroring in a situation that the configuration is
incorrect, i.e. mirrored packets, if any, are not supposed to reach
destination tunnel device. Then the configuration is rectified and
mirroring is checked to have started working.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when a mirror to gretap or ip6gretap netdevice is configured,
changes to neighbors are reflected.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test for mirroring to a gretap and an ip6gretap netdevices such
that the mirroring action is triggered by a flower match.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test mirroring to a gretap and an ip6gretap netdevice with a bound
device, where the tunnel device and the bound device are in different
VRFs (an overlay / underlay configuration).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test mirror to a gretap and an ip6gretap netdevice such that the remote
address of the tunnel is reachable through a next-hop route.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To simplify implementation of mirror-to-gretap tests, extend lib.sh with
several new functions that might potentially be useful more
broadly (although right now the mirroring tests will be the only
client).
Also add mirror_lib.sh with code useful for mirroring tests,
mirror_gre_lib.sh with code specifically useful for mirror-to-gretap
tests, and mirror_gre_topo.sh that primes a given test with a good
baseline topology that the test can then tweak to its liking.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Script in_netns.sh is a utility function and not its own test so it
shouldn't be part of the TEST_PROGS. The in_netns.sh get used by
run_afpackettests.
To install in_netns.sh without being added to the main run_kselftest.sh
script use the TEST_GEN_PROGS_EXTENDED variable.
Fixes: 5ff9c1a3dd ("selftests: net: add in_netns.sh to TEST_PROGS")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send udp data between a source and sink, optionally with udp gso.
The two processes are expected to be run on separate hosts.
A script is included that runs them together over loopback in a
single namespace for functionality testing.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corked sockets take a different path to construct a udp datagram than
the lockless fast path. Test this alternate path.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Connected sockets use path mtu instead of device mtu.
Test this path by inserting a route mtu that is lower than the device
mtu. Verify that the path mtu for the connection matches this lower
number, then run the same test as in the connectionless case.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate udp gso, including edge cases (such as min/max gso sizes).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a reference program showing how mmap() can be used
on TCP flows to implement receive zero copy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Script in_netns.sh isn't installed.
--------------------
running psock_fanout test
--------------------
./run_afpackettests: line 12: ./in_netns.sh: No such file or directory
[FAIL]
--------------------
running psock_tpacket test
--------------------
./run_afpackettests: line 22: ./in_netns.sh: No such file or directory
[FAIL]
In current code added in_netns.sh to be installed.
Fixes: cc30c93fa0 ("selftests/net: ignore background traffic in psock_fanout")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add multipath tests for onlink flag: one test with onlink added to
both nexthops, then tests with onlink added to only 1 nexthop.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that MTU configured from userspace is used on
link creation and changes, and that when it's not passed from
userspace, it's calculated properly from the MTU of the lower
layer.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as pmtu_vti4_link_add_mtu test, but for IPv6.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that MTU given on vti link creation is actually
configured, and that tunnel is not created with an invalid MTU
value.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that PMTU exceptions are created only when
needed on IPv4 routes with vti and xfrm, and their PMTU value is
checked as well.
We can't adopt the same approach as test_pmtu_vti6_exception()
here, because on IPv4 administrative MTU changes won't be
reflected directly on PMTU.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as pmtu_vti4_default_mtu, but on IPv6 with vti6.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that the MTU assigned by default to a vti (IPv4)
interface created on top of veth is simply veth's MTU minus the
length of the encapsulated IPv4 header.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce list of tests and their descriptions, and loop on it
in main body.
Tests will now just take care of calling setup with a list of
"units" they need, and return 0 on success, 1 on failure, 2 if
the test had to be skipped.
Main script body will take care of displaying results and
cleaning up after every test. Introduce guard variable so that
we don't clean up twice in case of interrupts or unexpected
failures.
The pmtu_vti6_exception test can now run its third step even if
the previous one failed, as we can return values from it.
Also introduce support to display test descriptions, and display
aligned OK/FAIL/SKIP test outcomes. Buffer error strings so that
in case of failure we can display them right under the outcome
for each test.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
...so that it can be used for any iproute command output.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In 7af137b72131 ("selftests: net: Introduce first PMTU test") I
accidentally assumed route_get_* helpers would run from a single
namespace. Make them a bit more generic, by passing the
namespace command prefix as a parameter instead.
Fixes: 7af137b72131 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David suggests it's more intuitive to return non-zero on
failures, and zero on success.
No need to introduce tail 'return 0' in functions, they will
return the exit code of the last command anyway.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add series of tests for valid and invalid nexthop specs for IPv6.
$ TEST=fib_nexthop_test ./fib_tests.sh
...
IPv6 nexthop tests
TEST: Directly connected nexthop, unicast address [ OK ]
TEST: Directly connected nexthop, unicast address with device [ OK ]
TEST: Gateway is linklocal address [ OK ]
TEST: Gateway is linklocal address, no device [ OK ]
TEST: Gateway can not be local unicast address [ OK ]
TEST: Gateway can not be local unicast address, with device [ OK ]
TEST: Gateway can not be a local linklocal address [ OK ]
TEST: Gateway can be local address in a VRF [ OK ]
TEST: Gateway can be local address in a VRF, with device [ OK ]
TEST: Gateway can be local linklocal address in a VRF [ OK ]
TEST: Redirect to VRF lookup [ OK ]
TEST: VRF route, gateway can be local address in default VRF [ OK ]
TEST: VRF route, gateway can not be a local address [ OK ]
TEST: VRF route, gateway can not be a local addr with device [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a user to run just a specific fib test by setting the TEST
environment variable.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace 'ip -netns testns' with the alias IP. Shortens the line lengths
and makes running the commands manually a bit easier.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some users want to be able to run the tests without a configuration file
which is useful when one needs to test both virtual and physical
interfaces on the same machine.
Move the defines that set the type of interface to create and whether to
create it away from the optional configuration file to the library like
the rest of the defines.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Returning 0 gives a false sense of success when the required modules did
not even manage to be initialized and register the required net devices.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already return an error when some dependencies (e.g., 'jq') are
missing so lets be consistent and do that for all.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the VLAN-aware bridge test, test the VLAN-unaware bridge and
make sure that ping, FDB learning and flooding work as expected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We miss CONFIG_* fragments so test fib-onlink-tests.sh can do:
ip li add lisa type vrf table 1101
ip li add veth1 type veth peer name veth2
And the follow message occurs if it isn't enabled:
Configuring interfaces
RTNETLINK answers: Operation not supported
This enables for NET_NRF (and friends) and VETH so we can create a vrf
table and veth.
Fixes: 153e1b84f4 ("selftests: Add FIB onlink tests")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the "ok" action test so it checks that packet that is okayed does not
continue to be processed by other rules. Fix error message as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One single test implemented so far: test_pmtu_vti6_exception
checks that the PMTU of a route exception, caused by a tunnel
exceeding the link layer MTU, is affected by administrative
changes of the tunnel MTU. Creation of the route exception is
checked too.
Requested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
