Remove compatible string "simple-mfd" in the example as we have
already added devm_of_platform_populate() in the parent driver.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the pm8998 and pmi8998 regulators as used in the MSM8998 platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The PWM controllers found in the Allwinner A64 and H5 SoCs are fully
compatible to the PWM controllers found in the A13 and H3.
Add new compatible strings for those SoCs to the binding document, so
that they can be safely used, together with a fallback string
(preferably "allwinner,sun5i-a13-pwm").
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The Timer Pulse Unit on R-Mobile A1 has registers that lie outside the
declared register block. Enlarge the register block size to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This patch adds compatible strings specific to r8a774[35], no driver
change is needed as the fallback compatible string will activate the
right code.
Also, this patch replaces the example with a DT snippet used
for adding PWM0 support to an r8a7743 based platform as the r8a7743 is
now the first platform fully compatible with this driver and its PWM DT
nodes refer to up-to-date code.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Pull "ARM: mediatek: updates for soc drivers for v4.16-next" from Matthias Brugger:
scpsy:
- mt2712: update power domains to reflect design changes in the SoC
- fix initialisation of power subdomains
- add support for mt7623a SoC
- use defines for mt2701 bus protection mask
* tag 'v4.16-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: update power domain data of MT2712
dt-bindings: soc: update MT2712 power dt-bindings
soc: mediatek: fix the mistaken pointer accessed when subdomains are added
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
soc: mediatek: avoid hardcoded value with bus_prot_mask
dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
This patch adds the device tree bindings for the Spreadtrum EIC
controller. The EIC can be seen as a special type of GPIO, which
can only be used as input mode.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull "Renesas ARM Based SoC Updates for v4.17" from Simon Horman:
01d675f159 ARM: shmobile: rcar-gen2: Add watchdog support
58adf1ba0d ARM: shmobile: Add watchdog support
* SoC
- Identify R-Car V3H (r8a77980) and M3N (r8a77965)
- Enable R-Car Gen2 regulator quirk for Stout board with H3 (r8a7790) SoC
Marek Vaust says "Regulator setup is suboptimal on H2 Stout too. The
Stout newly has two DA9210 regulators, so the quirk is extended to
handle another DA9210 at i2c address 0x70."
- Add watchdog support
This is the SoC portion of the following solution. It is not yet
enabled in DT as it is not functional without clock dependencies
in place.
Fabrizio Castro says "this series has been around for some time as RFC,
and it has collected useful comments from the community along the way.
The solution proposed by this patch set works for most R-Car Gen2 and
RZ/G1 devices, but not all of them. We now know that for some R-Car
Gen2 early revisions there is no proper software fix. Anyway, no
product has been built around early revisions, but development boards
mounting early revisions (basically prototypes) are still out there.
As a result, this series isn't enabling the internal watchdog on R-Car
Gen2 boards, developers may enable it in board specific device trees if
needed. This series has been tested by me on the iwg20d, iwg22d,
Lager, Alt, and Koelsch boards.
The problem
===========
To deal with SMP on R-Car Gen2 and RZ/G1, we install a reset vector to
ICRAM1 and we program the [S]BAR registers so that when we turn ON the
non-boot CPUs they are redirected to the reset vector installed by Linux
in ICRAM1, and eventually they continue the execution to RAM, where the
SMP bring-up code will take care of the rest. The content of the [S]BAR
registers survives a watchdog triggered reset, and as such after the
watchdog fires the boot core will try and execute the SMP bring-up code
instead of jumping to the bootrom code.
The fix
=======
The main strategy for the solution is to let the reset vector decide if
it needs to jump to shmobile_boot_fn or to the bootrom code. In a
watchdog triggered reset scenario, since the [S]BAR registers keep their
values, the boot CPU will jump into the newly designed reset vector, the
assembly routine will eventually test WOVF (a bit in register RWTCSRA
that indicates if the watchdog counter has overflown, the value of this
bit gets retained in this scenario), and jump to the bootrom code which
will in turn load up the bootloader, etc. When bringing up SMP or using
CPU hotplug, the reset vector will jump to shmobile_boot_fn instead."
* R-Car Rst
- Add support for R-Car V3H (r8a77980) and V3H (r8a77980)
* R-Car SYSC
- Mark rcar_sysc_matches[] __initconst
Geert Uytterhoeven says "This frees another 1764 bytes
(arm32/shmobile_defconfig) or 1000 bytes (arm64/renesas_defconfig) of
memory after kernel init."
- Fix power area parents
Sergei Shtylyov says "According to the figure 9.2(b) of the R-Car
Series, 3rd Generation User’s Manual: Hardware Rev. 0.80 the A2IRn and
A2SCn power areas in R8A77970 have the A3IR area as a parent, thus the
SYSC driver has those parents wrong.."
- Add support for R-Car V3H (r8a77980) and V3H (r8a77980)
* tag 'renesas-soc-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: rcar-gen2: Add watchdog support
ARM: shmobile: Add watchdog support
ARM: shmobile: rcar-gen2: Fix error check in regulator quirk
soc: renesas: rcar-rst: Add support for R-Car M3-N
ARM: shmobile: stout: enable R-Car Gen2 regulator quirk
soc: renesas: rcar-sysc: Add R-Car M3-N support
soc: renesas: Identify R-Car M3-N
soc: renesas: rcar-sysc: add R8A77980 support
dt-bindings: power: add R8A77980 SYSC power domain definitions
soc: renesas: r8a77970-sysc: fix power area parents
soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2
soc: renesas: rcar-rst: add R8A77980 support
soc: renesas: identify R-Car V3H
soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
Pull "Allwinner core changes for 4.17" from Maxime Ripard:
Here is our bunch of changes for mach-sunxi for this release cycle. This is
basically only about bringing the SMP support to the A80, which has a bug
in hardware and cannot use PSCI like the other SoCs we have.
* tag 'sunxi-core-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sunxi: mc-smp: Split out SoC-specific device node lookup sequence
ARM: sunxi: mc-smp: Use DT enable-method for sun9i A80 SMP
ARM: sunxi: mc-smp: Fix "lookback" typo
ARM: sun9i: smp: Support cpu0 hotplug
dt-bindings: ARM: sunxi: Document A80 SoC secure SRAM usage by SMP hotplug
ARM: sun9i: smp: Support CPU/cluster power down and hotplugging for cpu1~7
ARM: sun9i: Support SMP bring-up on A80
Some qcom platforms make some GPIOs or pins unavailable for use
by non-secure operating systems, and thus reading or writing the
registers for those pins will cause access control issues.
Introduce a DT property to describe the set of GPIOs that are
available for use so that higher level OSes are able to know what
pins to avoid reading/writing.
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Pyra-Handheld originally used the tca6424 but recently we have
replaced it by the pin and package compatible pcal6524. So let's
add this to the bindings and the driver.
And while we are at it, the pcal9555a does not have a compatible entry
either but is already supported by the device id table.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Allwinner H6 SoC has two pin controllers, one main controller
(called CPUX-PORT in user manual) and one controller in CPUs power
domain (called CPUS-PORT in user manual).
This commit introduces support for the main pin controller on H6.
The pin bank A and B are not wired out and hidden from the SoC's
documents, however it's shown that the "ATE" (an AC200 chip
co-packaged with the H6 die) is connected to the main SoC die via these
pin banks. The information about these banks is just copied from the BSP
pinctrl driver, but re-formatted to fit the mainline pinctrl driver
format. The GPIO functions are dropped, as they're impossible to use --
except a GPIO&IRQ only pin (PB20) which might be the IRQ of ATE.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull "Freescale arm64 device tree fixups for 4.17" from Shawn Guo:
- It reverts a couple of patches that "fix" DTC warnings on IFC memory
controller in a wrong way. We will start over agagin to address the
DTC warnings later.
* tag 'imx-dt64-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
Revert "dt-bindings: ifc: Fix the unit address format in the examples"
Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings"
Pull "Second set of dts changes for omap variants for v4.17" from Tony Lindgren:
This series of patches configures few new drivers and adds
omap5 specific nodes:
- Enable USB OTG mode for xhci on am437x
- A series of changes to configure aux control module instance
on omap5 mostly to get the audio clocks configured
- A series of changes to update droid4 for MDM6600 modem USB PHY
and UART1 pinctrl
* tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: Configure uart1 pins
ARM: dts: omap4-droid4: Configure MDM6600 USB PHY
ARM: dts: omap4-droid4: Fix USB PHY port naming
ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040
ARM: dts: omap5: add fref_xtal_ck support
ARM: dts: omap5: add support for control module wkup pad config
dt-bindings: omap5: ctrl: Support for control module wkup pad config
ARM: dts: am43xx: Enable dual-role mode for USB1
Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
* tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus
ARM: dts: sun8i-h3: Add Mali node
ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards
ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
ARM: dts: sunxi: h3/h5: Add HDMI pipeline
ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi
ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl
ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
ARM: dts: nanopi-neo-air: Add WiFi / eMMC
Pull "Allwinner arm64 DT changes for 4.17" from Maxime Ripard:
We've had for this release a pretty good progress on the arm64 front as
well:
- The A64 now has SPDIF support
- The H6 is now supported (even though at an early stage)
- The TERES-I laptop from Olimex has seen some early support as well
* tag 'sunxi-dt64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Add support for TERES-I laptop
arm64: dts: allwinner: a64: add simplefb for A64 SoC
arm64: dts: allwinner: a64: Add watchdog
arm64: dts: allwinner: a64: Add i2c0 pins
arm64: allwinner: h6: add support for Pine H64 board
arm64: allwinner: h6: add the basical Allwinner H6 DTSI file
arm64: dts: sunxi: Switch MMC nodes away from cd-inverted property
arm64: dts: allwinner: a64: Add DAI nodes
arm64: dts: allwinner: a64: Add SPDIF to the Pine64
arm64: dts: allwinner: a64: Add SPDIF to the A64
arm64: dts: allwinner: a64: Add the SPDIF block and pin
