Firmware loading interface for GVT-g golden HW state has been broken
before. This patch fixes GVT-g firmware loading interface. A user should
apply this patch if he wants to load GVT-g golden HW state from firmware
interface.
Fixes: 579cea5 ("drm/i915/gvt: golden virtual HW state management")
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The scanout surface size is the smaller of max texture size and
max STDU size.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Most of the display servers today use a single surface to represent the
entire desktop even if it's stretched across multiple screens.
For vmwgfx with STDU, the maximum surface size is limited to the
maximum texture size on the host. On a 2D VM, this limits our
ability to support configurations with more than one 4K monitor.
To get past this limitation, we will now allow using a large DMA buf
as the framebuffer, and take care of blitting contents from this DMA buf
to the display buffer.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
The callbacks we need to provide to many resources are very similar, so
provide a simple resource type with a number of helpers for these
callbacks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This reverts commit 2d8e60e8b0 ("drm/vmwgfx: Replace numeric
parameter like 0444 with macro")
The commit belongs to the series of 1285 patches sent to LKML on
2016-08-02, it changes the representation of file permissions from the
octal value "0600" to "S_IRUSR | S_IWUSR".
The general consensus was that the changes does not increase
readability, quite the opposite; 0600 is easier to parse mentally than
S_IRUSR | S_IWUSR.
It also causes argument inconsistency, due to commit 04319d89fb
("drm/vmwgfx: Add an option to change assumed FB bpp") that added
another call to module_param_named() where the permissions are written
as 0600.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
vmw_ldu_crtc_helper_commit() is not called if
drm_atomic_crtc_needs_modeset() decides nothing related to CRTC timing has
changed.
So a better place for this code is in vmw_ldu_primary_plane_atomic_update()
since we will need to update ld->fb every time the FB is updated.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Pinning fbdev's FB at the start of VRAM prevents X from pinning
its FB. Since for ldu, the fb would be pinned anyway during a
mode set, just skip pinning it in fbdev.
This is not the best solution, but since ldu is not used much
anymore, it seems like a reasonable workaround.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
We can no longer make the assumption that vmw_stdu_update_st() will
be called when there's a valid display surface attached. So
instead of using display_srf for width and height, make a record of
these paremeters when the screen target is first defined.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Now that the legacy path has been tested, turn on the
DRIVER_ATOMIC flag so user mode driver can start going through
the Atomic path.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Switch over to internal atomic API. This completes the atomic
internal atomic switch for all the Display Units.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Switch over to using internal atomic API for mode set.
This removes the legacy set_config API, replacing it with
drm_atomic_helper_set_config(). The DRM helper will use various
vmwgfx-specific atomic functions to set a mode.
DRIVER_ATOMIC capability flag is not yet set, so the user mode
will still use the legacy mode set IOCTL.
v2:
* Avoid a clash between page-flip pinning and setcrtc pinning, modify
the page-flip code to use the page-flip helper and the atomic callbacks.
To enable this, we will need to add a wrapper around atomic_commit.
* Add vmw_kms_set_config() to work around vmwgfx xorg driver bug
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
1. When unsetting a mode, num_connector should be set to zero
2. The pixel_format field needs to be initialized as newer DRM internal
functions checks this field
3. Take the drm_modeset_lock_all() because vmw_fb_kms_detach() can
change current mode
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
This connects the main state object check and commit function.
v2
* Use drm_atomic_helper_commit() rather than a vmwgfx-specific one
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.
v2
Use drm_atomic_helper_best_encoder() rather than a vmwgfx-specific one
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Refactor previous FB and cursor plane update code into their
atomic counterparts: check, update, prepare, cleanup, and disable.
These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.
v2:
* Removed unnecessary pinning of cursor surface
* Added a few function headers
v3:
* Set clip region equal to the destination region
* Fixed surface pinning policy
* Enable SVGA mode in vmw_sou_primary_plane_prepare_fb
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Atomic mode set requires us to refactor existing vmw_stdu_crtc_set_config
code into sections that check the validity of the new mode, and sections
that actually program the hardware state.
vmw_du_crtc_atomic_check() takes CRTC-related checking code. In a later
patch, vmw_du_primary_plane_atomic_check() will take framebuffer-related
checking code.
These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.
v2:
* The state->num_connector is actually the total number of potential
connectors, not just the one associated with the display unit.
The proper one to check is ->connector_mask.
* Add the check to only allow plane state to be the same as crtc state
(Thanks to mlankhorst)
* Make sure to turn on SVGA mode before using VRAM. SVGA mode is
disabled in master_drop if dbdev is not running.
v3:
* Moved dot clock override to crtc_atomic_check
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Add connector handling functions. Start tracking is_implicity in
the connector state. Eventually, this field should be tracked
exclusively in a connector state.
Now that plane and connector states have been created, we can also
activate the code that use CRTC state.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Add plane state handling functions.
We have to keep track of a few plane states so we cannot use the
DRM helper for this.
Created vmw_plane_state along with functions to reset, duplicate,
and destroty it.
v2
* Removed cursor clean up special case
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Create and Add CRTC state. We currently do not track any properties
or custom states so we can technically use the DRM helpers. Creating
this code just to make potential future additions easier.
Most of the new code will be compiled but not enabled until
plane/connector state handling code is also in place.
This is the first of a series to enable atomic mode set for vmwgfx.
The atomic enabling effort was done in collaboration with Thomas
Hellstrom and the VMware Graphics Team.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Universal support is prerequisite for atomic mode set.
Explicitly create planes for the cursor and the primary FB. With
a functional cursor plane, the DRM will no longer use the legacy
cursor_set2 and cursor_move entry points.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Make i915_gem_wait_for_idle() be a little heavier in order to try and
guarantee that the GPU is indeed idle (by checking each engine
individually is idle, i.e. all writes are complete and the rings
stopped) after waiting for in-flight requests to be completed.
v2: And return the final error.
v3: Break the wait_for() out from under the WARN -- the macro expansion
is hideous and unreadable in the warning message
v4: If wait_for_engine() fails the result is catastrophic, mark the
device as wedged and wait for the repair team.
References: https://bugs.freedesktop.org/show_bug.cgi?id=98836
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Michał Winiarski pointed out that the debugging infrastructure (such as
trace_dma_fence_release) likes to pretty print the timeline name, long
after we have freed the timeline. Our timelines currently live as part of
the GTT (due to the strict ordering we currently use through each) which
belong to the context. We aim to free the context and release its
hardware resources as soon as we able to (i.e. when the last
fence/request using it has been signaled and retired). As the
.get_timeline_name is purely a debug feature, rather than extending the
lifetime of the context, or splitting it into many different release
phases just to keep the name around, replace the timeline name with a
constant after the fence has been signaled. This avoids the potential
use-after-free.
Reported-by: Krzysztof Olinski <krzysztof.e.olinski@intel.com>
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170330111614.29757-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 05506b5be0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The variable info is never NULL, which is checked by the caller. This
patch removes the redundant info NULL check logic.
Fixes: 695fbc08d8 ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit 865f03d42e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From commit d1a513be1f ("drm/i915/gvt: add resolution definition for vGPU
type"), small type has been restricted to small resolution, so not
require larger high GM size any more. Change to smaller 384M for more
VM creation with vGPU enabled which still perform reasonable workload.
Fixes: d1a513be1f ("drm/i915/gvt: add resolution definition for vGPU type")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit bf39ec335e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unlocking is dangerous. In this case we combine an early update to the
out-of-queue request, because we know that it will be inserted into the
correct FIFO priority-ordered slot when it becomes ready in the future.
However, given sufficient enthusiasm, it may become ready as we are
continuing to reschedule, and so may gazump the FIFO if we have since
dropped its spinlock. The result is that it may be executed too early,
before its dependencies.
v2: Move all work into the second phase over the topological sort. This
removes the shortcut on the out-of-rbtree request to ensure that we only
adjust its priority after adjusting all of its dependencies.
Fixes: 20311bd350 ("drm/i915/scheduler: Execute requests in order of priorities")
Testcase: igt/gem_exec_whisper
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327202143.7972-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit a79a524e92)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Just one vc4 fix from Eric, cc: stable
* tag 'drm-misc-fixes-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc:
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
drm/i915 fixes for v4.11-rc5
* tag 'drm-intel-fixes-2017-03-29' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Restore marking context objects as dirty on pinning
drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
drm/i915/gvt: set shadow entry to scratch page while p2m failed
drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
drm/i915/gvt: fix wrong offset when loading RCS mocs
drm/i915/gvt: add write handler for mmio mbctl
drm/i915/kvmgt: Hold struct kvm reference
One small fix for radeon.
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
a single fix to keep fence seqnos of completed jobs monotonically
increasing, as expected in various locations of the driver code. Also
tagged for stable.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: (re-)protect fence allocation with GPU mutex
