Here is a small patch which tries to fulfill a point in the perf todo
list:
* Make pressing 'V' multiple times to go on cycling thru various
verbosity levels in 'perf top', so that info that is present in
'perf top -v' can be obtained without having to restart the tool
(acme).
After a small grep in the code, the max verbosity level seems 3; so,
we cycle at 4; I did not dare define a MAX_VERBOSE_LEVEL constant.
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161012214823.14324-2-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the jit_buf_desc contains unwinding information, it is emitted as
eh_frame unwinding sections in the DSOs generated by perf inject.
The unwinding information is required to unwind of JITed code which do
not maintain the frame pointer register during function calls. It can
be emitted by V8 / Chromium when the --perf_prof_unwinding_info is
passed to V8.
The eh_frame and eh_frame_hdr sections are emitted immediately after the
.text.
The .eh_frame is aligned at a 8-byte boundary, and .eh_frame_hdr at a
4-byte one. Since size of the .eh_frame is required to be a multiple of
the word size, which means there will never be additional padding
between it and the .eh_frame_hdr on machines where the word size is 4 or
8 bytes.
However, additional padding might be inserted between .text and
.eh_frame to reach the correct alignment, which will always be 8 bytes,
also on 32bit machines. The reasoning behind this choice is that 4 extra
bytes of padding worst case are not a large cost for the advantage of
removing word-size dependent offset calculations when emitting the
jitdump.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-8-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This record is intended to provide unwinding information in the
eh_frame format. This is required to unwind JITed code which
does not maintain the frame pointer register during function calls.
The eh_frame unwinding information can be emitted by V8 / Chromium
when the --perf_prof_unwinding_info is passed.
A record of type jr_code_unwinding_info comes before the jr_code_load
it referred to and contains both the .eh_frame and .eh_frame_hdr.
The fields in the header have the following meaning:
* unwinding_size: size of the eh_frame and eh_frame_hdr, necessary
for distinguishing the content from the padding.
* eh_frame_hdr_size: as the name says.
* mapped_size: size of the payload that was in memory at runtime.
typically unwinding_size if the .eh_frame_hdr and .eh_frame were
mapped, or 0 if they weren't. It should always be the former case,
since the .eh_frame is guaranteed to be mapped in memory. However,
certain JITs might want to inject an .eh_frame_hdr with an empty LUT
to trigger fp-based unwinding fallback in libunwind. The only part
of the .eh_frame_hdr that libunwind reads from remote memory is the
LUT, and since there is none, mapping the unwinding info in memory
is not necessary, and 0 in this field signifies that it wasn't.
This practical hack allows to save bytes in code memory for those
JIT compilers that might or might not maintain a valid frame pointer.
The payload that follows is assumed to contain first the .eh_frame and
then the .eh_header_hdr, with no padding between the two.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-7-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the build dependencies on the jitdump support in
perf. As it stands jitdump was wrongfully made dependent 100% on using
DWARF. However, the dwarf dependency, only exist if generating the
source line table in genelf_debug.c. The rest of the support does not
need DWARF.
This patch removes the dependency on DWARF for the entire jitdump
support. It keeps it only for the genelf_debug.c support.
Signed-off-by: Maciej Debski <maciejd@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-3-git-send-email-eranian@google.com
Fixes: e12b202f8f ("perf jitdump: Build only on supported archs")
[ Make it build only if NO_LIBELF isn't defined, as jitdump.o will only be built in that case ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the loop body isn't executed at all, then the 'ret' local variable,
that is uninitialized will be used as the return value.
This triggers this error on Alpine Linux:
CC /tmp/build/perf/util/demangle-java.o
CC /tmp/build/perf/util/demangle-rust.o
CC /tmp/build/perf/util/jitdump.o
CC /tmp/build/perf/util/genelf.o
util/jitdump.c: In function 'jit_process':
util/jitdump.c:622:3: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
fprintf(stderr, "injected: %s (%d)\n", path, ret);
^
util/jitdump.c:584:6: note: 'ret' was declared here
int ret;
^
FLEX /tmp/build/perf/util/parse-events-flex.c
/ $ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-alpine-linux-musl/5.3.0/lto-wrapper
Target: x86_64-alpine-linux-musl
Configured with: /home/buildozer/aports/main/gcc/src/gcc-5.3.0/configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info
+--build=x86_64-alpine-linux-musl --host=x86_64-alpine-linux-musl --target=x86_64-alpine-linux-musl --with-pkgversion='Alpine 5.3.0' --enable-checking=release
+--disable-fixed-point --disable-libstdcxx-pch --disable-multilib --disable-nls --disable-werror --disable-symvers --enable-__cxa_atexit --enable-esp
+--enable-cloog-backend --enable-languages=c,c++,objc,java,fortran,ada --disable-libssp --disable-libmudflap --disable-libsanitizer --enable-shared
+--enable-threads --enable-tls --with-system-zlib
Thread model: posix
gcc version 5.3.0 (Alpine 5.3.0)
But this so far got under the radar, not causing any build problem, till the
"perf jit: enable jitdump support without dwarf" gets applied, when the above
problem takes place, some combination of inlining or whatever, the problem
is real, so fix it by initializing the variable to zero.
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maciej Debski <maciejd@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/r/20161013200437.GA12815@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It can be useful to specify branch type state per event, for example if
we want to collect both software trace points and last branch PMU events
in a single collection. Currently this doesn't work because the software
trace point errors out with -b.
There was already a branch-type parameter to configure branch sample
types per event in the parser, but it was stubbed out. This patch
implements the necessary plumbing to actually enable it.
Now:
$ perf record -e sched:sched_switch,cpu/cpu-cycles,branch_type=any/ ...
works.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476306127-19721-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change Intel PT and BTS to pass up the length and the instruction
bytes of the decoded or sampled instruction in the perf sample.
The decoder already knows this information, we just need to pass it
up. Since it is only a couple of movs it is not very expensive.
Handle instruction cache too. Make sure ilen is always initialized.
Used in the next patch.
[Adrian: re-base on top (and adjust for) instruction buffer size tidy-up]
[Adrian: add BTS support and adjust commit message accordingly]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/1475847747-30994-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy instruction buffer size usage in preparation for copying the
instruction bytes onto samples.
The instruction buffer is presently used for debugging, so rename its
size macro from INTEL_PT_INSN_DBG_BUF_SZ to INTEL_PT_INSN_BUF_SZ, and
use it everywhere.
Note that the maximum instruction size is 15 which is a less efficient size
to copy than 16, which is why a separate buffer size is used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1475847747-30994-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display global shared cachelines related stats table as part of the
stdio output or when --stats option is speicified:
$ perf c2c report --stats
...
=================================================
Global Shared Cache Line Event Information
=================================================
Total Shared Cache Lines : 1384
Load HITs on shared lines : 5995
Fill Buffer Hits on shared lines : 1726
L1D hits on shared lines : 1943
L2D hits on shared lines : 0
LLC hits on shared lines : 1360
Locked Access on shared lines : 1993
Store HITs on shared lines : 1504
Store L1D hits on shared lines : 1446
Total Merged records : 3527
Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-p0gty8ctbdzisrniwqxhqmhq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display global stats table as part of the stdio output
or when --stats option is speicified:
$ perf c2c report --stats
=================================================
Trace Event Information
=================================================
Total records : 41237
Locked Load/Store Operations : 4075
Load Operations : 20526
Loads - uncacheable : 0
Loads - IO : 0
Loads - Miss : 552
Loads - no mapping : 31
Load Fill Buffer Hit : 7333
Load L1D hit : 6398
Load L2D hit : 144
Load LLC hit : 4889
Load Local HITM : 1185
Load Remote HITM : 838
Load Remote HIT : 52
Load Local DRAM : 183
Load Remote DRAM : 106
Load MESI State Exclusive : 289
Load MESI State Shared : 0
Load LLC Misses : 1179
LLC Misses to Local DRAM : 15.5%
LLC Misses to Remote DRAM : 9.0%
LLC Misses to Remote cache (HIT) : 4.4%
LLC Misses to Remote cache (HITM) : 71.1%
Store Operations : 20711
Store - uncacheable : 0
Store - no mapping : 1
Store L1D Hit : 20158
Store L1D Miss : 552
No Page Map Rejects : 7
Unable to parse data source : 0
Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-qkyvao3qsrnwazf0w1jvsh7z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set resort/display fields for both cachelines and single cacheline
displays.
Cachelines are sorted on:
rmt_hitm
will be made configurable in following patches.
Following fields are display for cachelines:
dcacheline
tot_recs
percent_hitm
tot_hitm,lcl_hitm,rmt_hitm
stores,stores_l1hit,stores_l1miss
dram_lcl,dram_rmt
ld_llcmiss
tot_loads
ld_fbhit,ld_l1hit,ld_l2hit
ld_lclhit,ld_rmthit
The single cacheline is sort by:
offset,rmt_hitm,lcl_hitm
will be made configurable in following patches.
Following fields are display for each cacheline:
percent_rmt_hitm
percent_lcl_hitm
percent_stores_l1hit
percent_stores_l1miss
offset
pid
tid
mean_rmt
mean_lcl
mean_load
cpucnt
symbol
dso
node
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-0rclftliywdq9qr2sjbugb6b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the single cacheline output:
node
It displays nodes hits related to cacheline accesses.
The node filed comes in 3 flavors:
- node IDs separated by ','
- node IDs with stats for each ID, in following format:
Node{cpus %hitms %stores}
- node IDs with list of affected CPUs in following format:
Node{cpu list}
User can switch the flavor with -N option (-NN,-NNN).
It will be available in TUI to switch this with 'n' key.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-6742e6g0r7n63y5wc4rrgxx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
