Currently if an option name is ambiguous it only prints first two
matched option names but no help. It'd be better it could show all
possible names and help messages too.
Before:
$ perf report --show
Error: Ambiguous option: show (could be --show-total-period or
--show-ref-call-graph)
Usage: perf report [<options>]
After:
$ perf report --show
Error: Ambiguous option: show (could be --show-total-period or
--show-ref-call-graph)
Usage: perf report [<options>]
-n, --show-nr-samples
Show a column with the number of samples
--showcpuutilization
Show sample percentage for different cpu modes
-I, --show-info Display extended information about perf.data file
--show-total-period
Show a column with the sum of periods
--show-ref-call-graph
Show callgraph from reference event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some tools have a lot of options, so, providing a way to show help just
for some of them may come handy:
$ perf report -h --tui
Usage: perf report [<options>]
--tui Use the TUI interface
$ perf report -h --tui --showcpuutilization -b -c
Usage: perf report [<options>]
-b, --branch-stack use branch records for per branch histogram filling
-c, --comms <comm[,comm...]>
only consider symbols in these comms
--showcpuutilization
Show sample percentage for different cpu modes
--tui Use the TUI interface
$
Using it with perf bash completion is also handy, just make sure you
source the needed file:
$ . ~/git/linux/tools/perf/perf-completion.sh
Then press tab/tab after -- to see a list of options, put them after -h
and only the options chosen will have its help presented:
$ perf report -h --
--asm-raw --demangle-kernel --group
--kallsyms --pretty --stdio
--branch-history --disassembler-style --gtk
--max-stack --showcpuutilization --symbol-filter
--branch-stack --dsos --header
--mem-mode --show-info --symbols
--call-graph --dump-raw-trace --header-only
--modules --show-nr-samples --symfs
--children --exclude-other --hide-unresolved
--objdump --show-ref-call-graph --threads
--column-widths --fields --ignore-callees
--parent --show-total-period --tid
--comms --field-separator --input
--percentage --socket-filter --tui
--cpu --force --inverted
--percent-limit --sort --verbose
--demangle --full-source-path --itrace
--pid --source --vmlinux
$ perf report -h --socket-filter
Usage: perf report [<options>]
--socket-filter <n>
only show processor socket that match with this filter
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-83mcdd3wj0379jcgea8w0fxa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf top --call-graph' option is same as 'perf record'. But
'perf top' also need to receive display options in 'perf report'. To do
that, change parse_callchain_report_opt() to allow record options too.
Now perf top can receive display options like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph
<mode[,dump_size],output_type,min_percent[,print_limit],call_order[,branch]>
setup and enables call-graph (stack chain/backtrace)
recording: fp dwarf lbr, output_type (graph, flat,
fractal, or none), min percent threshold, optional
print limit, callchain order, key (function or
address), add branches
$ perf top --call-graph callee,graph,fp
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf will core dump if --per-socket/core -a are applied for perf stat.
The root cause is that cpu_map__build_map set refcnt of evlist's cpu_map
to 1. It should set refcnt for the newly created cpu_map, not evlist's
cpu_map.
Here is the example:
# perf stat -e cycles --per-socket -a sleep 1
Performance counter stats for 'system wide':
S0 36 30,196,257 cycles
S1 28 15,823,536 cycles
1.001126828 seconds time elapsed
*** Error in `./perf': corrupted double-linked list: 0x00000000021f9090 ***
======= Backtrace: =========
/lib64/libc.so.6[0x3002e7bbe7]
/lib64/libc.so.6[0x3002e7d2b5]
./perf(perf_evsel__delete+0x28)[0x485bdd]
./perf[0x4800e8]
./perf(perf_evlist__delete+0x5e)[0x482cd5]
./perf(cmd_stat+0xf25)[0x432328]
./perf[0x4768e0]
./perf[0x476ad6]
./perf[0x476b41]
./perf(main+0x1d0)[0x476db2]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3002e21b45]
./perf[0x4202c5]
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1444388363-35936-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently libtraceevent emits warning on unsupported event formats.
However it'd be better to see them only -v option is given. To do that,
it needs to override the warning() function which is used in the
libtracevent. Thus add set_warning_routine() same as set_die_routine()
and check the verbose flag in our warning routine.
Before:
# perf test 5
5: parse events tests :
Warning: [kvmmmu:kvm_mmu_get_page] bad op token {
Warning: [kvmmmu:kvm_mmu_sync_page] bad op token {
Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token {
Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token {
Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined
...
Ok
After:
# perf test 5
5: parse events tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445268229-1601-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
unw_word_t is uint64_t even on 32-bit MIPS. Cast it to uintptr_t before
the cast to void *p to get rid of the following errors:
util/unwind-libunwind.c: In function 'access_mem':
util/unwind-libunwind.c:464:4: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
util/unwind-libunwind.c:475:2: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
cc1: all warnings being treated as errors
make[3]: *** [util/unwind-libunwind.o] Error 1
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1443379079-29133-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not as the first attempt at finding a vmlinux for the running kernel,
this way we get a more informative filename to present in tools, it will
check that the build-id is the same as the one previously loaded in the
DSO in dso->build_id, reading from /sys/kernel/notes, for instance.
E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc
kernel function, in the first line:
Before:
scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
After:
scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux
And:
# ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
# file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
/root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
#
The same as:
# file /lib/modules/4.3.0-rc1+/build/vmlinux
/lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
Furthermore:
# sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux
# sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
[root@zoo new]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we dont fail properly when pattern matching fails to find any
tracepoint.
Current behaviour:
$ perf record -e 'sched:krava*' sleep 1
WARNING: event parser found nothinginvalid or unsupported event: 'sched:krava*'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
This patch change:
$ perf record -e 'sched:krava*' sleep 1
event syntax error: 'sched:krava*'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/krava* not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444073477-3181-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sorting on 'symbol' gives to broad a resolution as it can cover a range
of IP address. Use the iaddr instead to get proper sorting on IP
addresses. Need to use the 'mem_sort' feature of perf record.
New sort option is: symbol_iaddr, header label is 'Code Symbol'.
$ perf mem report --stdio -F +symbol_iaddr
# Overhead Samples Code Symbol Local Weight
# ........ ............ ........................ ............
#
54.08% 1 [k] nmi_handle 192
4.51% 1 [k] finish_task_switch 16
3.66% 1 [.] malloc 13
3.10% 1 [.] __strcoll_l 11
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow probing on kernel modules when 'perf' is built without debuginfo
support.
Currently perf-probe --module requires linking with libdw, but this
doesn't make sense.
E.g.
----
# make NO_DWARF=1
# ./perf probe -m pcspkr pcspkr_event%return
Error: unknown switch `m'
----
With this patch
----
# ./perf probe -m pcspkr pcspkr_event%return
Added new event:
probe:pcspkr_event (on pcspkr_event%return in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151002125832.18617.78721.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some PMUs, like the 'intel_bts' one can be used as an event name, i.e.:
$ perf record -e intel_bts:// usleep 1
Is a valid event name.
But the code printing such PMUs was not honouring the 'event_glob'
parameter, so the following line was always appearing:
$ intel_bts// [Kernel PMU event]
Fix it:
$ [acme@felicio linux]$ perf list data
List of pre-defined events (to be used in -e):
uncore_imc/data_reads/ [Kernel PMU event]
uncore_imc/data_writes/ [Kernel PMU event]
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ajb71858n7q7ao77b8pyy74w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch f9db0d0f1b ("perf callchain: Allow disabling call graphs
per event") added an ability to enable/disable callchain recording per
event. But it had a problem when the enablement setting is changed at
'perf report' time using -g/--call-graph option.
For example, the following scenario will get a segfault.
$ perf record -ag sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.500 MB perf.data (2555 samples) ]
$ perf report -g none
perf: Segmentation fault
-------- backtrace --------
perf[0x53a98a]
/usr/lib/libc.so.6(+0x335af)[0x7f4e91df95af]
This is because callchain_param.sort() callback was not set but it
tried to call the function as it had the PERF_SAMPLE_CALLCHAIN bit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: f9db0d0f1b ("perf callchain: Allow disabling call graphs per event")
Link: http://lkml.kernel.org/r/1443587640-24242-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the user doesn't specify any event, try the most precise "cycles"
available, i.e. start by "cycles:ppp" and go on removing "p" till it
works.
E.g.
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (11 samples) ]
$ perf evlist
cycles:pp
$ perf evlist -v
cycles:pp: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
$ grep 'model name' /proc/cpuinfo | head -1
model name : Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz
$
When 'cycles' appears explicitely is specified this will not be tried,
i.e. the user has full control of the level of precision to be used:
$ perf record -e cycles usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (9 samples) ]
$ perf evlist
cycles
$ perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2:
1, comm_exec: 1
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://www.youtube.com/watch?v=nXaxk27zwlk
Link: http://lkml.kernel.org/n/tip-b1ywebmt22pi78vjxau01wth@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe shows more precisely message when it finds given
%return target function is inlined.
Without this fix:
----
# ./perf probe -V getname_flags%return
Return probe must be on the head of a real function.
Debuginfo analysis failed.
Error: Failed to show vars.
----
With this fix:
----
# ./perf probe -V getname_flags%return
Failed to find "getname_flags%return",
because getname_flags is an inlined function and has no return point.
Debuginfo analysis failed.
Error: Failed to show vars.
----
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164137.3733.55055.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe --list will get a segfault if the first kprobe event is on a
module and the second or latter one is on the kernel.
e.g.
----
# ./perf probe -q -m pcspkr pcspkr_event
# ./perf probe -q vfs_read
# ./perf probe -l
Segmentation fault (core dumped)
----
This is because the debuginfo_cache fails to handle NULL module name,
which causes segfault on strcmp. (Note that strcmp("something", NULL)
always causes segfault)
To fix this debuginfo_cache__open always translates the NULL module name
to "kernel" (this is correct, because NULL module name means opening the
debuginfo for the kernel)
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event@drivers/input/misc/pcspkr.c
in pcspkr)
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164135.3733.23993.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf probe always failed to find appropriate line numbers because of
failing to find .text start address offset from debuginfo.
e.g.
----
# ./perf probe -m pcspkr pcspkr_event:5
Added new events:
probe:pcspkr_event (on pcspkr_event:5 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5 in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event_1 -aR sleep 1
# ./perf probe -l
Failed to find debug information for address ffffffffa031f006
Failed to find debug information for address ffffffffa031f016
probe:pcspkr_event (on pcspkr_event+6 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event+22 in pcspkr)
----
This fixes the above issue as below.
1. Get the relative address of the symbol in .text by using
map->start.
2. Adjust the address by adding the offset of .text section
in the kernel module binary.
With this fix, perf probe -l shows lines correctly.
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164132.3733.24643.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to remove dot suffix (e.g. .const, .isra) from the second or latter
events which has suffix numbers.
Since the previous commit 35a23ff928 ("perf probe: Cut off the gcc
optimization postfixes from function name") didn't care about the suffix
numbered events, therefore we'll have an error when we add additional
events on the same dot suffix functions.
e.g.
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Failed to write event: Invalid argument
Error: Failed to add events.
----
This fixes above issue as below:
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Added new events:
probe:get_sigframe (on get_sigframe.isra.2.constprop.3)
probe:get_sigframe_1 (on get_sigframe.isra.2.constprop.3)
You can now use it in all perf tools, such as:
perf record -e probe:get_sigframe_1 -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164130.3733.26573.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
