This patch serves the initial support to identify and list SDT events in
binaries. When programs containing SDT markers are compiled, gcc with
the help of assembler directives identifies them and places them in the
section ".note.stapsdt".
To find these markers from the binaries, one needs to traverse through
this section and parse the relevant details like the name, type and
location of the marker. Also, the original location could be skewed due
to the effect of prelinking. If that is the case, the locations need to
be adjusted.
The functions in this patch open a given ELF, find out the SDT section,
parse the relevant details, adjust the location (if necessary) and
populate them in a list.
A typical note entry in ".note.stapsdt" section is as follows :
|--nhdr.n_namesz--|
------------------------------------
| nhdr | "stapsdt" |
----- |----------------------------------|
| | <location> <base_address> |
| | <semaphore> |
nhdr.n_descsize | "provider_name" "note_name" |
| | <args> |
----- |----------------------------------|
| nhdr | "stapsdt" |
|...
The above shows an excerpt from the section ".note.stapsdt". 'nhdr' is
a structure which has the note name size (n_namesz), note description
size (n_desc_sz) and note type (n_type).
So, in order to parse the note note info, we need nhdr to tell us where
to start from. As can be seen from <sys/sdt.h>, the name of the SDT
notes given is "stapsdt". But this is not the identifier of the note.
After that, we go to description of the note to find out its location, the
address of the ".stapsdt.base" section and the semaphore address.
Then, we find the provider name and the SDT marker name and then follow the
arguments.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736022628.27797.1201368329092908163.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current method for inserting symbols is to use the symbols__insert()
function. However symbols__insert() does not update the dso symbol
cache. This causes problems in the following scenario:
1. symbol not found at addr using dso__find_symbol
2. symbol inserted at addr using the existing symbols__insert function
3. symbol still not found at addr using dso__find_symbol() because cache isn't
updated. This is undesired behavior.
The undesired behavior in (3) is addressed by creating a new function,
dso__insert_symbol() to both insert the symbol and update the symbol
cache if necessary.
If dso__insert_symbol() is used in (2) instead of symbols__insert(),
then the undesired behavior in (3) is avoided.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462937209-6032-2-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ppc64le functions have a Global Entry Point (GEP) and a Local Entry
Point (LEP). While placing a probe, we always prefer the LEP since it
catches function calls through both the GEP and the LEP. In order to do
this, we fixup the function entry points during elf symbol table lookup
to point to the LEPs. This works, but breaks 'perf test kallsyms' since
the symbols loaded from the symbol table (pointing to the LEP) do not
match the symbols in kallsyms.
To fix this, we do not adjust all the symbols during symbol table load.
Instead, we note down st_other in a newly introduced arch-specific
member of perf symbol structure, and later use this to adjust the probe
trace point.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/6be7c2b17e370100c2f79dd444509df7929bdd3e.1460451721.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fprintf_sym() and fprintf_callchain() methods now allow users to
change the existing behaviour of showing "[unknown]" as the name of
unresolved symbols to instead show "[0x123456]", i.e. its address.
The current patch doesn't change tools to use this facility, the results
from 'perf trace' and 'perf script' cotinue like:
70.109 ( 0.001 ms): qemu-system-x8/10153 poll(ufds: 0x7f2d93ffe870, nfds: 1) = 0 Timeout
[unknown] (/usr/lib64/libc-2.22.so)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
start_thread+0xca (/usr/lib64/libpthread-2.22.so)
__clone+0x6d (/usr/lib64/libc-2.22.so)
The next patch will make 'perf trace' use the new formatting.
Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fja1ods5vqpg42mdz09xcz3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the hierarchical view, entries will be grouped and sorted on the
first key, and then on the second key, and so on. Add the
he->hroot_{in,out} fields to keep the lower level entries. Actually this
can share space, in a union, with callchain's 'sorted_root' since the
hroots are only used by non-leaf entries and callchain is only used by
leaf entries.
It also adds the 'parent_he' and 'depth' fields which can be used by browsers.
This patch only implements collapsing part which creates internal
entries for each sort key. These need to be sorted by output_sort stage
and to be displayed properly in the later patch(es).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the root user tries to read a file owned by some other user we get:
# ls -la perf.data
-rw-------. 1 acme acme 20032 Nov 12 15:50 perf.data
# perf report
File perf.data not owned by current user or root (use -f to override)
# perf report -f | grep -v ^# | head -2
30.96% ls [kernel.vmlinux] [k] do_set_pte
28.24% ls libc-2.20.so [.] intel_check_word
#
That wasn't happening when the symbol code tried to read a JIT map,
where the same check was done but no forcing was possible, fix it.
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/2380
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting yup the symbols library we setup several filter lists,
for dsos, comms, symbols, etc, and there is code that, if there are
filters, do certain operations, like recalculate the number of non
filtered histogram entries in the top/report TUI.
But they were considering just the "Zoom" filters, when they need to
take into account as well the above mentioned filters (perf top --comms,
--dsos, etc).
So store in symbol_conf.has_filter true if any of those filters is in
place.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f5edfmhq69vfvs1kmikq1wep@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf probe tries to add a probe in a binary using symbol name, it
sometimes failed since some symbols were discard during loading dso.
When it resolves an address to symbol, it'd be better to have just one
symbol at given address. But for finding address from symbol, it'd be
better to keep all names (including aliases).
So allow tools to state that they want to allow aliases via
symbol_conf.allow_aliases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073127.6904.3232.stgit@localhost.localdomain
[ Original patch passwd allow_alias to many functions, use symbol_conf.allow_aliases instead ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently branch stacks can be only shown as edge histograms for
individual branches. I never found this display particularly useful.
This implements an alternative mode that creates histograms over
complete branch traces, instead of individual branches, similar to how
normal callgraphs are handled. This is done by putting it in front of
the normal callgraph and then using the normal callgraph histogram
infrastructure to unify them.
This way in complex functions we can understand the control flow that
lead to a particular sample, and may even see some control flow in the
caller for short functions.
Example (simplified, of course for such simple code this is usually not
needed), please run this after the whole patchkit is in, as at this
point in the patch order there is no --branch-history, that will be
added in a patch after this one:
tcall.c:
volatile a = 10000, b = 100000, c;
__attribute__((noinline)) f2()
{
c = a / b;
}
__attribute__((noinline)) f1()
{
f2();
f2();
}
main()
{
int i;
for (i = 0; i < 1000000; i++)
f1();
}
% perf record -b -g ./tsrc/tcall
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ]
% perf report --no-children --branch-history
...
54.91% tcall.c:6 [.] f2 tcall
|
|--65.53%-- f2 tcall.c:5
| |
| |--70.83%-- f1 tcall.c:11
| | f1 tcall.c:10
| | main tcall.c:18
| | main tcall.c:18
| | main tcall.c:17
| | main tcall.c:17
| | f1 tcall.c:13
| | f1 tcall.c:13
| | f2 tcall.c:7
| | f2 tcall.c:5
| | f1 tcall.c:12
| | f1 tcall.c:12
| | f2 tcall.c:7
| | f2 tcall.c:5
| | f1 tcall.c:11
| |
| --29.17%-- f1 tcall.c:12
| f1 tcall.c:12
| f2 tcall.c:7
| f2 tcall.c:5
| f1 tcall.c:11
| f1 tcall.c:10
| main tcall.c:18
| main tcall.c:18
| main tcall.c:17
| main tcall.c:17
| f1 tcall.c:13
| f1 tcall.c:13
| f2 tcall.c:7
| f2 tcall.c:5
| f1 tcall.c:12
The default output is unchanged.
This is only implemented in perf report, no change to record or anywhere
else.
This adds the basic code to report:
- add a new "branch" option to the -g option parser to enable this mode
- when the flag is set include the LBR into the callstack in machine.c.
The rest of the history code is unchanged and doesn't know the
difference between LBR entry and normal call entry.
- detect overlaps with the callchain
- remove small loop duplicates in the LBR
Current limitations:
- The LBR flags (mispredict etc.) are not shown in the history
and LBR entries have no special marker.
- It would be nice if annotate marked the LBR entries somehow
(e.g. with arrows)
v2: Various fixes.
v3: Merge further patches into this one. Fix white space.
v4: Improve manpage. Address review feedback.
v5: Rename functions. Better error message without -g. Fix crash without
-b.
v6: Rebase
v7: Rebase. Use NO_ENTRY in memset.
v8: Port to latest tip. Move add_callchain_ip to separate
patch. Skip initial entries in callchain. Minor cleanups.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to define bfd_demangle() to either a wrapper for
cplus_demangle() or to a stub when NO_DEMANGLE is defined.
That is at odds with using bfd.h for some other reason, as it defines
bfd_demangle() and then if code that wants to use symbol.h, where the
above stubbing/wrapping is done, and bfd.h for other reasons, we end up
with a build error where bfd_demangle() is found to be redefined.
Avoid that by moving the stubbing/wrapping to symbol-elf.c, that is the
only user of such function. If we ever get to a point where there are
more valid users, we can then introduce a header for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6wzjpe2fy9xtgchshulixlzw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf record finishes a session, it pre-processes samples in order
to write build-id info from DSOs that had samples.
During this process it'll call map__load() for the kernel map, and it
ends up calling dso__load_vmlinux_path() which replaces dso->long_name.
But this function checks kernel's build-id before searching vmlinux path
so it'll end up with a cryptic name, the pathname for the entry in the
~/.debug cache, which can be confusing to users.
This patch adds a flag to skip the build-id check during record, so
that it'll have the original vmlinux path for the kernel dso->long_name,
not the entry in the ~/.debug cache.
Before:
# perf record -va sleep 3
mmap size 528384B
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ]
Looking at the vmlinux_path (7 entries long)
Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols
After:
# perf record -va sleep 3
mmap size 528384B
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ]
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some C++ symbols have very long name and they make column length longer.
Most of them are about parameters including templates and we can ignore
such info most of time IMHO.
This patch passes DMGL_NO_OPTS by default when calling bfd_demangle().
One can still see full symbols with -v/--verbose option.
before:
JS_CallFunctionValue(JSContext*, JSObject*, JS::Value, unsigned int, JS::Value*, JS::Value*)
after:
JS_CallFunctionValue
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently vmlinux_path__init() only tries to find vmlinux file from
current directory, /boot and some canonical directories with version
number of the running kernel. This can be a problem when reporting old
data recorded on a kernel version not running currently.
We can use --symfs option for this but it's annoying for user to do it
always. As we already have the info in the perf.data file, it can be
changed to use it for the search automatically.
Before:
$ perf report
...
# Samples: 4K of event 'cpu-clock'
# Event count (approx.): 1067250000
#
# Overhead Command Shared Object Symbol
# ........ .......... ................. ..............................
71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction
After:
# Overhead Command Shared Object Symbol
# ........ .......... ................. ....................
71.87% swapper [kernel.kallsyms] [k] native_safe_halt
This requires to change signature of symbol__init() to receive struct
perf_session_env *.
Reported-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --percentage option is for controlling overhead percentage
displayed. It can only receive either of "relative" or "absolute".
"relative" means it's relative to filtered entries only so that the
sum of shown entries will be always 100%. "absolute" means it retains
the original value before and after the filter is applied.
$ perf report -s comm
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
6.11% as
4.35% sh
4.14% make
1.13% fixdep
...
$ perf report -s comm -c cc1,gcc --percentage absolute
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
$ perf report -s comm -c cc1,gcc --percentage relative
# Overhead Command
# ........ ............
#
90.69% cc1
9.31% gcc
Note that it has zero effect if no filter was applied.
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
