The insecure_elasticity setting is an ugly wart brought out by
users who need to insert duplicate objects (that is, distinct
objects with identical keys) into the same table.
In fact, those users have a much bigger problem. Once those
duplicate objects are inserted, they don't have an interface to
find them (unless you count the walker interface which walks
over the entire table).
Some users have resorted to doing a manual walk over the hash
table which is of course broken because they don't handle the
potential existence of multiple hash tables. The result is that
they will break sporadically when they encounter a hash table
resize/rehash.
This patch provides a way out for those users, at the expense
of an extra pointer per object. Essentially each object is now
a list of objects carrying the same key. The hash table will
only see the lists so nothing changes as far as rhashtable is
concerned.
To use this new interface, you need to insert a struct rhlist_head
into your objects instead of struct rhash_head. While the hash
table is unchanged, for type-safety you'll need to use struct
rhltable instead of struct rhashtable. All the existing interfaces
have been duplicated for rhlist, including the hash table walker.
One missing feature is nulls marking because AFAIK the only potential
user of it does not need duplicate objects. Should anyone need
this it shouldn't be too hard to add.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sample use case of how this is encoded:
user space via tuntap (or a connected VM/Machine/container)
encodes the tcindex TLV.
Sample use case of decoding:
IFE action decodes it and the skb->tc_index is then used to classify.
So something like this for encoded ICMP packets:
.. first decode then reclassify... skb->tcindex will be set
sudo $TC filter add dev $ETH parent ffff: prio 2 protocol 0xbeef \
u32 match u32 0 0 flowid 1:1 \
action ife decode reclassify
...next match the decode icmp packet...
sudo $TC filter add dev $ETH parent ffff: prio 4 protocol ip \
u32 match ip protocol 1 0xff flowid 1:1 \
action continue
... last classify it using the tcindex classifier and do someaction..
sudo $TC filter add dev $ETH parent ffff: prio 5 protocol ip \
handle 0x11 tcindex classid 1:1 \
action blah..
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fanotify_get_response() calls fsnotify_remove_event() when it finds that
group is being released from fanotify_release() (bypass_perm is set).
However the event it removes need not be only in the group's notification
queue but it can have already moved to access_list (userspace read the
event before closing the fanotify instance fd) which is protected by a
different lock. Thus when fsnotify_remove_event() races with
fanotify_release() operating on access_list, the list can get corrupted.
Fix the problem by moving all the logic removing permission events from
the lists to one place - fanotify_release().
Fixes: 5838d4442b ("fanotify: fix double free of pending permission events")
Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We must do it this way, because e.g. POD X3 won't play any sound unless
the host listens on the bulk EP, so we cannot export it only via libusb.
The driver currently doesn't use the bulk EP messages in other way,
in future it could e.g. sense/modify volume(s).
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
imx-drm active plane reconfiguration, cleanup, FSU/IC/IRT/VDIC support
- add active plane reconfiguration support (v4),
use the atomic_disable callback
- stop calling disable_plane manually in the plane destroy path
- let mode cleanup destroy mode objects on driver unbind
- drop deprecated load/unload drm_driver ops
- add exclusive fence to plane state, so the atomic helper can
wait on them, remove the open-coded fence wait from imx-drm
- add low level deinterlacer (VDIC) support
- add support for channel linking via the frame synchronisation unit (FSU)
- add queued image conversion support for memory-to-memory scaling, rotation,
and color space conversion, using IC and IRT.
* tag 'imx-drm-next-2016-09-19' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Add queued image conversion support
gpu: ipu-v3: Add ipu_rot_mode_is_irt()
gpu: ipu-v3: fix a possible NULL dereference
drm/imx: parallel-display: detach bridge or panel on unbind
drm/imx: imx-ldb: detach bridge on unbind
drm/imx: imx-ldb: detach panel on unbind
gpu: ipu-v3: Add FSU channel linking support
gpu: ipu-v3: Add Video Deinterlacer unit
drm/imx: add exclusive fence to plane state
drm/imx: fold ipu_plane_disable into ipu_disable_plane
drm/imx: don't destroy mode objects manually on driver unbind
drm/imx: drop deprecated load/unload drm_driver ops
drm/imx: don't call disable_plane in plane destroy path
drm/imx: Add active plane reconfiguration support
drm/imx: Use DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET flag
drm/imx: ipuv3-crtc: Use the callback ->atomic_disable instead of ->disable
gpu: ipu-v3: Do not wait for DMFC FIFO to clear when disabling DMFC channel
- refactor the sseu code (Imre)
- refine guc dmesg output (Dave Gordon)
- more vgpu work
- more skl wm fixes (Lyude)
- refactor dpll code in prep for upfront link training (Jim Bride et al)
- consolidate all platform feature checks into intel_device_info (Carlos Santa)
- refactor elsp/execlist submission as prep for re-submission after hang
recovery and eventually scheduling (Chris Wilson)
- allow synchronous gpu reset handling, to remove tricky/impossible/fragile
error recovery code (Chris Wilson)
- prep work for nonblocking (execlist) submission, using fences to track
depencies and drive elsp submission (Chris Wilson)
- partial error recover/resubmission of non-guilty batches after hangs (Chris Wilson)
- full dma-buf implicit fencing support (Chris Wilson)
- dp link training fixes (Jim, Dhinkaran, Navare, ...)
- obey dp branch device pixel rate/bpc/clock limits (Mika Kahola), needed for
many vga dongles
- bunch of small cleanups and polish all over, as usual
[airlied: printing macros collided]
* tag 'drm-intel-next-2016-09-19' of git://anongit.freedesktop.org/drm-intel: (163 commits)
drm/i915: Update DRIVER_DATE to 20160919
drm: Fix DisplayPort branch device ID kernel-doc
drm/i915: use NULL for NULL pointers
drm/i915: do not use 'false' as a NULL pointer
drm/i915: make intel_dp_compute_bpp static
drm: Add DP branch device info on debugfs
drm/i915: Update bits per component for display info
drm/i915: Check pixel rate for DP to VGA dongle
drm/i915: Read DP branch device SW revision
drm/i915: Read DP branch device HW revision
drm/i915: Cleanup DisplayPort AUX channel initialization
drm: Read DP branch device id
drm: Helper to read max bits per component
drm: Helper to read max clock rate
drm: Drop VGA from bpc definitions
drm: Add missing DP downstream port types
drm/i915: Add ddb size field to device info structure
drm/i915/guc: general tidying up (submission)
drm/i915/guc: general tidying up (loader)
drm/i915: clarify PMINTRMSK/pm_intr_keep usage
...
More radeon and amdgpu changes for 4.9. Highlights:
- Initial SI support for amdgpu (controlled by a Kconfig option)
- misc ttm cleanups
- runtimepm fixes
- S3/S4 fixes
- power improvements
- lots of code cleanups and optimizations
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (151 commits)
drm/ttm: remove cpu_address member from ttm_tt
drm/radeon/radeon_device: remove unused function
drm/amdgpu: clean function declarations in amdgpu_ttm.c up
drm/amdgpu: use the new ring ib and dma frame size callbacks (v2)
drm/amdgpu/vce3: add ring callbacks for ib and dma frame size
drm/amdgpu/vce2: add ring callbacks for ib and dma frame size
drm/amdgpu/vce: add common ring callbacks for ib and dma frame size
drm/amdgpu/uvd6: add ring callbacks for ib and dma frame size
drm/amdgpu/uvd5: add ring callbacks for ib and dma frame size
drm/amdgpu/uvd4.2: add ring callbacks for ib and dma frame size
drm/amdgpu/sdma3: add ring callbacks for ib and dma frame size
drm/amdgpu/sdma2.4: add ring callbacks for ib and dma frame size
drm/amdgpu/cik_sdma: add ring callbacks for ib and dma frame size
drm/amdgpu/si_dma: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx8: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx7: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx6: add ring callbacks for ib and dma frame size
drm/amdgpu/ring: add an interface to get dma frame and ib size
drm/amdgpu/sdma3: drop unused functions
drm/amdgpu/gfx6: drop gds_switch callback
...
Install the callbacks via the state machine. It uses the multi instance
infrastructure of the hotplug code to handle each interface.
virtscsi_set_affinity() is removed from virtscsi_init() because
virtscsi_cpu_notif_add() (the function which registers the instance) is invoked
right after it and the cpuhp_state_add_instance() functions invokes the startup
callback on all online CPUs.
The same thing can not be applied virtscsi_cpu_notif_remove() because
virtscsi_remove_vqs() invokes virtscsi_set_affinity() with affinity = false as
argument but the old CPU_DEAD state invoked the function with affinity = true
(which does not match the DEAD callback).
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: virtualization@lists.linux-foundation.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160906170457.32393-11-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch enables prepending appearance value to scan response data.
It also adds support for setting appearance value through mgmt command.
If currently advertised instance has apperance flag set it is expired
immediately.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
While the subsystem version information are purely informational,
increase the minor number due to the addition of user channel and
management control monitoring suppport. It is helpful for debugging
purposes to see the version numbers change.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This command is used to retrieve the current state and basic
information of a controller. It is typically used right after
getting the response to the Read Controller Index List command
or an Index Added event (or its extended counterparts).
When any of the values in the EIR_Data field changes, the event
Extended Controller Information Changed will be used to inform
clients about the updated information.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Instead of keeping a version string around, use version and revision
numbers and then stringify them for use as module parameter.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of hiding everything behind a general managment events flag,
introduce indivdual flags that allow fine control over which events are
send to a given management channel.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds support for tracing all management commands and events via the
monitor interface.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This sends new notifications to the monitor support whenever a
management channel has been opened or closed. This allows tracing of
control channels really easily.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The mgmt version information will be also needed for the control
changell tracing feature. This provides a helper to pack them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To further allow unique identification and tracking of control socket,
store cookie and comm information when binding the socket.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Commit 5177a83827 ("Bluetooth: Add debugfs fields for hardware and
firmware info") introduced hci_set_hw_info() and hci_set_fw_info().
These functions use kvasprintf_const() but are not marked with a
__printf attribute. Adding such an attribute helps detecting issues
related to printf-formatting at build time.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The led_trigger field in hci_dev should be conditional based on if
CONFIG_BT_LEDS is set or not.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Right now LSM_AUDIT_DATA_PATH type contains "struct path" in union "u"
of common_audit_data. This information is used to print path of file
at the same time it is also used to get to dentry and inode. And this
inode information is used to get to superblock and device and print
device information.
This does not work well for layered filesystems like overlay where dentry
contained in path is overlay dentry and not the real dentry of underlying
file system. That means inode retrieved from dentry is also overlay
inode and not the real inode.
SELinux helpers like file_path_has_perm() are doing checks on inode
retrieved from file_inode(). This returns the real inode and not the
overlay inode. That means we are doing check on real inode but for audit
purposes we are printing details of overlay inode and that can be
confusing while debugging.
Hence, introduce a new type LSM_AUDIT_DATA_FILE which carries file
information and inode retrieved is real inode using file_inode(). That
way right avc denied information is given to user.
For example, following is one example avc before the patch.
type=AVC msg=audit(1473360868.399:214): avc: denied { read open } for
pid=1765 comm="cat"
path="/root/.../overlay/container1/merged/readfile"
dev="overlay" ino=21443
scontext=unconfined_u:unconfined_r:test_overlay_client_t:s0:c10,c20
tcontext=unconfined_u:object_r:test_overlay_files_ro_t:s0
tclass=file permissive=0
It looks as follows after the patch.
type=AVC msg=audit(1473360017.388:282): avc: denied { read open } for
pid=2530 comm="cat"
path="/root/.../overlay/container1/merged/readfile"
dev="dm-0" ino=2377915
scontext=unconfined_u:unconfined_r:test_overlay_client_t:s0:c10,c20
tcontext=unconfined_u:object_r:test_overlay_files_ro_t:s0
tclass=file permissive=0
Notice that now dev information points to "dm-0" device instead of
"overlay" device. This makes it clear that check failed on underlying
inode and not on the overlay inode.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
[PM: slight tweaks to the description to make checkpatch.pl happy]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, the layout driver selection code always chooses the first one
from the list. That's not really ideal however, as the server can send
the list of layout types in any order that it likes. It's up to the
client to select the best one for its needs.
This patch adds an ordered list of preferred driver types and has the
selection code sort the list of available layout drivers according to it.
Any unrecognized layout type is sorted to the end of the list.
For now, the order of preference is hardcoded, but it should be possible
to make this configurable in the future.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The Version One default inline threshold is still 1KB. But allow
testing with thresholds up to 64KB.
This maximum is somewhat arbitrary. There's no fundamental
architectural limit I'm aware of, but it's good to keep the size of
Receive buffers reasonable. Now that Send can use a s/g list, a
Send buffer is only as large as each RPC requires. Receive buffers
are always the size of the inline threshold, however.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Send an RDMA-CM private message on connect, and look for one during
a connection-established event.
Both sides can communicate their various implementation limits.
Implementations that don't support this sideband protocol ignore it.
Once the client knows the server's inline threshold maxima, it can
adjust the use of Reply chunks, and eliminate most use of Position
Zero Read chunks. Moderately-sized I/O can be done using a pure
inline RDMA Send instead of RDMA operations that require memory
registration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Introduce data structure used by both client and server to exchange
implementation details during RDMA/CM connection establishment.
This is an experimental out-of-band exchange between Linux
RPC-over-RDMA Version One implementations, replacing the deprecated
CCP (see RFC 5666bis). The purpose of this extension is to enable
prototyping of features that might be introduced in a subsequent
version of RPC-over-RDMA.
Suggested by Christoph Hellwig and Devesh Sharma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently there's a hidden and indirect mechanism for finding the
rpcrdma_req that goes with an rpc_rqst. It depends on getting from
the rq_buffer pointer in struct rpc_rqst to the struct
rpcrdma_regbuf that controls that buffer, and then to the struct
rpcrdma_req it goes with.
This was done back in the day to avoid the need to add a per-rqst
pointer or to alter the buf_free API when support for RPC-over-RDMA
was introduced.
I'm about to change the way regbuf's work to support larger inline
thresholds. Now is a good time to replace this indirect mechanism
with something that is more straightforward. I guess this should be
considered a clean up.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For xprtrdma, the RPC Call and Reply buffers are involved in real
I/O operations.
To start with, the DMA direction of the I/O for a Call is opposite
that of a Reply.
In the current arrangement, the Reply buffer address is on a
four-byte alignment just past the call buffer. Would be friendlier
on some platforms if that was at a DMA cache alignment instead.
Because the current arrangement allocates a single memory region
which contains both buffers, the RPC Reply buffer often contains a
page boundary in it when the Call buffer is large enough (which is
frequent).
It would be a little nicer for setting up DMA operations (and
possible registration of the Reply buffer) if the two buffers were
separated, well-aligned, and contained as few page boundaries as
possible.
Now, I could just pad out the single memory region used for the pair
of buffers. But frequently that would mean a lot of unused space to
ensure the Reply buffer did not have a page boundary.
Add a separate pointer to rpc_rqst that points right to the RPC
Reply buffer. This makes no difference to xprtsock, but it will help
xprtrdma in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprtrdma needs to allocate the Call and Reply buffers separately.
TBH, the reliance on using a single buffer for the pair of XDR
buffers is transport implementation-specific.
Instead of passing just the rq_buffer into the buf_free method, pass
the task structure and let buf_free take care of freeing both
XDR buffers at once.
There's a micro-optimization here. In the common case, both
xprt_release and the transport's buf_free method were checking if
rq_buffer was NULL. Now the check is done only once per RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprtrdma needs to allocate the Call and Reply buffers separately.
TBH, the reliance on using a single buffer for the pair of XDR
buffers is transport implementation-specific.
Transports that want to allocate separate Call and Reply buffers
will ignore the "size" argument anyway. Don't bother passing it.
The buf_alloc method can't return two pointers. Instead, make the
method's return value an error code, and set the rq_buffer pointer
in the method itself.
This gives call_allocate an opportunity to terminate an RPC instead
of looping forever when a permanent problem occurs. If a request is
just bogus, or the transport is in a state where it can't allocate
resources for any request, there needs to be a way to kill the RPC
right there and not loop.
This immediately fixes a rare problem in the backchannel send path,
which loops if the server happens to send a CB request whose
call+reply size is larger than a page (which it shouldn't do yet).
One more issue: looks like xprt_inject_disconnect was incorrectly
placed in the failure path in call_allocate. It needs to be in the
success path, as it is for other call-sites.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: there is some XDR initialization logic that is common
to the forward channel and backchannel. Move it to an XDR header
so it can be shared.
rpc_rqst::rq_buffer points to a buffer containing big-endian data.
Update its annotation as part of the clean up.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use a setup function to call into the NFS layer to test an rpc_xprt
for session trunking so as to not leak the rpc_xprt_switch into
the nfs layer.
Search for the address in the rpc_xprt_switch first so as not to
put an unnecessary EXCHANGE_ID on the wire.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Give the NFS layer access to the rpc_xprt_switch_add_xprt function
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
