The udata->inlen error path needs to clean up the ref
added by rxe_alloc().
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Peek at the CQ after arming it so that we can return a hint.
This avoids missed completions due to a race between posting
CQEs and arming the CQ.
For example, CM teardown waits on MAD requests to complete with
ib_cq_poll_work(). Without this fix, the last completion might be
left on the CQ, hanging the kthread doing the teardown.
The console backtraces look like this:
[ 4199.911284] Call Trace:
[ 4199.911401] [<ffffffff9657fe95>] schedule+0x35/0x80
[ 4199.911556] [<ffffffff965830df>] schedule_timeout+0x22f/0x2c0
[ 4199.911727] [<ffffffff9657f7a8>] ? __schedule+0x368/0xa20
[ 4199.911891] [<ffffffff96580903>] wait_for_completion+0xb3/0x130
[ 4199.912067] [<ffffffff960a17e0>] ? wake_up_q+0x70/0x70
[ 4199.912243] [<ffffffffc074a06d>] cm_destroy_id+0x13d/0x450 [ib_cm]
[ 4199.912422] [<ffffffff961615d5>] ? printk+0x57/0x73
[ 4199.912578] [<ffffffffc074a390>] ib_destroy_cm_id+0x10/0x20 [ib_cm]
[ 4199.912759] [<ffffffffc076098c>] rdma_destroy_id+0xac/0x340 [rdma_cm]
[ 4199.912941] [<ffffffffc076f2cc>] 0xffffffffc076f2cc
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The last_psn algorithm fails in the zero-byte case: it calculates
first_psn = N, last_psn = N-1. This makes the operation unretryable since
the res structure will fail the (first_psn <= psn <= last_psn) test in
find_resource().
While here, use BTH_PSN_MASK to mask the calculated last_psn.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
skb_out is decremented in rxe_skb_tx_dtor(), which is not called in the
loopback() path. Move the increment to the send() path rather than
rxe_xmit_packet().
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A client might post a read followed by a send. The partner receives
and acknowledges both transactions, posting an RCQ entry for the
send, but something goes wrong with the read ACK. When the client
retries the read, the partner's responder processes the duplicate
read but incorrectly resets the PSN to the value preceding the
original send. When the duplicate send arrives, the responder cannot
tell that it is a duplicate, so the responder generates a duplicate
RCQ entry, confusing the client.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A simple userspace application might poll the CQ, find a completion,
and then attempt to post a new WQE to the SQ. A spurious error can
occur if the userspace application detects a full SQ in the instant
before the kernel is able to advance the SQ consumer pointer.
This is noticeable when using single-entry SQs with ibv_rc_pingpong
if lots of kernel and userspace library debugging is enabled.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid smashing the stack when an ICRC error occurs on an IPv6 network.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It makes me nervous when we cast pointer parameters. I would estimate
that around 50% of the time, it indicates a bug. Here the cast is not
needed becaue u32 and and unsigned int are the same thing. Removing the
cast makes the code more robust and future proof in case any of the
types change.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A race condition fix added an rxe_qp structure to the stack in order
to be able to perform rollback in rxe_requester(), but the structure
is large enough to trigger the warning for possible stack overflow:
drivers/infiniband/sw/rxe/rxe_req.c: In function 'rxe_requester':
drivers/infiniband/sw/rxe/rxe_req.c:757:1: error: the frame size of 2064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This changes the rollback function to only save the psn inside
the qp, which is the only field we access in the rollback_qp
anyway.
Fixes: 3050b99850 ("IB/rxe: Fix race condition between requester and completer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Defining static data structures in a header file is wrong because
this causes the data structure to be instantiated once in every .c
file it is included in. Hence move the definition of a static
array from a header file into the only .c file in which it is used.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Declare the structure mmu_notifier_ops as const as it is only stored in
the ops field of a mmu_notifier structure. The ops field is of type
const struct mmu_notifier_ops *, so mmu_notifier_ops structures having
this property can be declared as const.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct mmu_notifier_ops i@p = {...};
@ok1@
identifier r1.i;
position p;
struct mmu_rb_handler handler;
@@
handler.mn.ops=&i@p
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct mmu_notifier_ops i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct mmu_notifier_ops i;
File size before:
text data bss dec hex filename
3566 72 16 3654 e46
drivers/infiniband/hw/hfi1/mmu_rb.o
File size after:
text data bss dec hex filename
3658 0 16 3674 e5a
drivers/infiniband/hw/hfi1/mmu_rb.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add rvt_div_round_up_mtu() and rvt_div_mtu() routines to
do the computation based on the pmtu and the log_pmtu.
Change divides in qib, hfi1 to use the new inlines.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some parts of the code don't use the standard release
wrapper rvt_put_qp() for decrementing and testing
the refcount to then try to use a resource.
Replace this code with the standard driver wrapper.
Fixes: Commit 4d6f85c3fa ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In sc_buffer_alloc(), the sc->alloc_lock is released
before calling sc_release_update(), and it is reacquired
after the function call. This causes CPU lock trading.
Fix it by not dropping the lock before calling
sc_release_update().
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The s_cur_sge field in the qp structure holds a pointer to the
SGE of the currently processed WQE. It assumes the protection
of the RVT_S_BUSY flag to prevent the changing of this field
while the send engine is using it. This scheme works as long
as there is only one instance of the send engine running at a
time.
Scaling of the send engine to multiple cores would break this
assumption as there could be multiple instances of the send engine
running on different CPUs. This opens a window where the QP's
RVT_S_BUSY flag is not set but the send engine is still running.
To prevent accidental changing of the s_cur_sge pointer, the QP's
dependence on it is removed. The SGE pointer is now stored in the
verbs_txreq, which is a per-packet data structure. This ensures
that each individual packet has it's own pointer, which is setup
while the RVT_S_BUSY flag is set.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Low power QSFP AOC cables require a different SerDes
Tx PLL bandwidth setting than the default. The
8051 firmware does not know the details, so the driver
needs to tell the firmware through a special setting.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The qp->s_cur_size field assumes that the S_BUSY bit protects
the field from modification after the slock is dropped. Scaling the
send engine to multiple cores would break that assumption.
Correct the issue by carrying the payload size in the txreq structure.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously tools like hfi1stats had to access these counters through
debugfs, which often caused permission issue for non-root users. It is
not always acceptable to change the debugfs mounting permission due
to security concerns. When exposed under the IB stats interface, the
counters are universally readable by default.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Split rdmavt traces into separate files to preserve the original
hierarchy since only one trace sub system may now be defined per header
file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For the received packets with payload less or equal 8DWS
RxDmaDataFifoRdUncErr is not reported. There is set RHF.EccErr
if the header is not suppressed. When such packet is detected
on the send side the header suppression mechanism is disabled
by clearing SH bit in the packet header.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Both the 8051 memory and LCB register access require multiple
steps and coordination with the driver. This cannot be safely
done with resource0 alone.
The 8051 memory is exported read-only. LCB is exported read/write.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
qp->r_aflags is already protected by qp->r_lock, therefore,
test_and_clear_bit() doesn't need to be atomic. Profile
shows this function call is costly.
Change the test_and_clear_bit() call to use the non-atomic
variant.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When reading multiple dc8051 data memory locations
at once, the read enabled field must be toggled
at every address change. Do that by writing only
the address first, then writing the enable.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix to return error code -ENOMEM from the __get_free_page() error
handling case instead of 0, as done elsewhere in this function.
Fixes: 05eb23893c ("cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove check for zero 'pages' of unallocated pbles calculated in
add_pble_pool(); as it can never be true.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fail the connect and return the proper error code if a client
is started with local IP address and there is no corresponding
loopback listener.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IRD is not populated on connect request and application is
getting 0 for the value. Fill in the correct value on
connect request.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the TOS field in IP header with the value passed in
from application. If there is mismatch between the remote
client's TOS and listener, set the listener Tos to the higher
of the two values.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add NULL check for ibqp event handler before calling it to report
QP events, as it might not initialized.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use list_for_each_entry_safe macro for the IPv6 addr list
as IPv6 addresses can be deleted while going through the
list.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Disable listeners and disconnect all connected QPs on
a netdev interface down event. On an interface up event,
the listeners are re-enabled.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On i40iw device close, disconnect all connected QPs by moving
them to error state; and block further QPs, PDs and CQs from
being created. Additionally, make sure all resources have been
freed before deallocating the ibdev as part of the device close.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to allow each independent memory region to
be configured for 2MB page size in addition to 4KB
page size.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to use physically mapped WQ's and MR's if determined
that the OS registered user-memory for the region is physically
contiguous. This feature will eliminate the need for unnecessarily
setting up and using PBL's when not required.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The SQ head is incorrectly incremented when the number
of WQEs required is greater than the number available.
The fix is to use the I40IW_RING_MOV_HEAD_BY_COUNT
macro. This checks for the SQ full condition first and
only if SQ has room for the request, then we move the
head appropriately.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The flush_code variable in i40iw_bld_terminate_hdr() is obsolete and
the check to set qp->sq_flush is unreachable. Currently flush code is
populated in setup_term_hdr() and both SQ and RQ are flushed always
as part of the tear down flow.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
