Trivial fix to spelling mistake, rename kfd_ioctl_dbg_unrgesiter
to kfd_ioctl_dbg_unregister
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
I noticed that the VT switch doesn't work any longer with a Dell
laptop with 1366x768 eDP when the machine is connected with a DP
monitor. It behaves as if VT were switched, but the graphics remain
frozen. Actually the keyboard works, so I could switch back to VT7
again.
I tried to track down the problem, and encountered a long story until
we reach to this error:
- The machine is booted with video=1366x768 option (the distro
installer seems to add it as default).
- Recently, drm_helper_probe_single_connector_modes() deals with
cmdline modes, and it tries to create a new mode when no
matching mode is found.
- The drm_mode_create_from_cmdline_mode() creates a mode based on
either CVT of GFT according to the given cmdline mode; in our case,
it's 1366x768.
- Since both CVT and GFT can't express the width 1366 due to
alignment, the resultant mode becomes 1368x768, slightly larger than
the given size.
- Later on, the atomic commit is performed, and in
drm_atomic_check_only(), the size of each plane is checked.
- The size check of 1366x768 fails due to the above, and eventually
the whole VT switch fails.
Back in the history, we've had a manual fix-up of 1368x768 in various
places via c09dedb7a5 ("drm/edid: Add a workaround for 1366x768 HD
panel"), but they have been all in drm_edid.c at probing the modes
from EDID. For addressing the problem above, we need a similar hack
to the mode newly created from cmdline, manually adjusting the width
when the expected size is 1366 while we get 1368 instead.
Fixes: eaf99c749d ("drm: Perform cmdline mode parsing during...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109145614.29454-1-tiwai@suse.de
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Many DRM drivers only work with an MMU, and after the patch to enable
core DRM support without MMU, we already had one fixup for many of them.
The etnaviv, armada and msm drivers were missed and have the same problem:
warning: (DRM_ETNAVIV) selects IOMMU_SUPPORT which has unmet direct dependencies (MMU)
warning: (DRM_I915 && DRM_MSM && DRM_ETNAVIV) selects SHMEM which has unmet direct dependencies (MMU)
drivers/gpu/drm/armada/armada_gem.o: In function `armada_gem_vm_fault':
armada_gem.c:(.text.armada_gem_vm_fault+0x14): undefined reference to `vm_insert_pfn'
arch/arm/mm/dma-mapping.c: In function '__iommu_alloc_remap':
arch/arm/mm/dma-mapping.c:1390:4: error: 'VM_ARM_DMA_CONSISTENT' undeclared (first use in this function)
arch/arm/mm/dma-mapping.c:1456:31: error: 'atomic_pool' undeclared (first use in this function); did you mean 'atomic_xor'?
Fixes: 011cda5899 ("drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"")
Fixes: 62a0d98a18 ("drm: allow to use mmuless SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111133357.3664191-2-arnd@arndb.de
Performing an eviction search can be very, very slow especially for a
range restricted replacement. For example, a workload like
gem_concurrent_blit will populate the entire GTT and then cause aperture
thrashing. Since the GTT is a mix of active and inactive tiny objects,
we have to search through almost 400k objects before finding anything
inside the mappable region, and as this search is required before every
operation performance falls off a cliff.
Instead of performing the full search, we do a trial replacement of the
node at a random location fitting the specified restrictions. We lose
the strict LRU property of the GTT in exchange for avoiding the slow
search (several orders of runtime improvement for gem_concurrent_blit
4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is
(later) mitigated firstly by only doing replacement if we find no
freespace and secondly by execbuf doing a PIN_NONBLOCK search first before
it starts thrashing (i.e. the random replacement will only occur from the
already inactive set of objects).
v2: Ascii-art, and check preconditionst
v3: Rephrase final sentence in comment to explain why we don't bother
with if (i915_is_ggtt(vm)) for preferring random replacement.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
When we evict from the GTT to make room for an object, the hole we
create is put onto the MRU stack inside the drm_mm range manager. On the
next search pass, we can speed up a PIN_HIGH allocation by referencing
that stack for the new hole.
v2: Pull together the 3 identical implements (ahem, a couple were
outdated) into a common routine for allocating a node and evicting as
necessary.
v3: Detect invalid calls to i915_gem_gtt_insert()
v4: kerneldoc
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-1-chris@chris-wilson.co.uk
After rollover of the IOVA space, we want to get a low IOVA address,
otherwise the the games we play by remembering the last IOVA are
pointless. When we search for a free hole with DRM_MM_SEARCH_DEFAULT,
drm_mm will pop the next entry from the free holes stack, which will
likely be a high IOVA. By using DRM_MM_SEARCH_BELOW we can trick
drm_mm into reversing the search and provide us with a low IOVA.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Wladimir van der Laan <laanwj@gmail.com>
Start converting over from the byte count to its semantic macro, either
we want to allocate the size of a physical page in main memory or we
want the size of a virtual page in the GTT. 4096 could mean either, but
PAGE_SIZE and I915_GTT_PAGE_SIZE are explicit and should help improve
code comprehension and future changes. In the future, we may want to use
variable GTT page sizes and so have the challenge of knowing which
hardcoded values were used to represent a physical page vs the virtual
page.
v2: Look for a few more 4096s to convert, discover IS_ALIGNED().
v3: 4096ul paranoia, make fence alignment a distinct value of 4096, keep
bdw stolen w/a as 4096 until we know better.
v4: Add asserts that i915_vma_insert() start/end are aligned to GTT page
sizes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110144734.26052-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Let userspace know if its request was resubmitted due to it being
executed at the time of a global reset. In this case, the reset was for
a guilty request on another engine, and this request was an innocent
victim that will be re-executed upon restarting. However, since it was
running at the time of the reset, we can not guarantee that it suffered
no ill-effects from the reset (e.g. some context state may be lost, or
some self-modifying fragment shaders will be restarted from the final
state not their initial state), to let userspace know that it has been
corrupted set a special value on the fence->error, -EAGAIN.
If the request does hang on resubmission, the error will be overwritten
with -EIO.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-3-chris@chris-wilson.co.uk
The core provides now an ABI to userspace for generation of frame CRCs,
so implement the ->set_crc_source() callback and reuse as much code as
possible with the previous ABI implementation.
When handling the pageflip interrupt, we skip 1 or 2 frames depending on
the HW because they contain wrong values. For the legacy ABI for
generating frame CRCs, this was done in userspace but now that we have a
generic ABI it's better if it's not exposed by the kernel.
v2:
- Leave the legacy implementation in place as the ABI implementation
in the core is incompatible with it.
v3:
- Use the "cooked" vblank counter so we have a whole 32 bits.
- Make sure we don't mess with the state of the legacy CRC capture
ABI implementation.
v4:
- Keep use of get_vblank_counter as in the legacy code, will be
changed in a followup commit.
v5:
- Skip first frame or two as it's known that they contain wrong
data.
- A few fixes suggested by Emil Velikov.
v6:
- Rework programming of the HW registers to preserve previous
behavior.
v7:
- Address whitespace issue.
- Added a comment on why in the implementation of the new ABI we
skip the 1st or 2nd frames.
v9:
- Add stub for intel_crtc_set_crc_source.
v12:
- Rebased.
- Remove stub for intel_crtc_set_crc_source and instead set the
callback to NULL (Jani Nikula).
v15:
- Rebased.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
irq
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110134305.26326-2-tomeu.vizoso@collabora.com
Pull in latest drm-next from Dave Airlie to get at all the drm-misc
goodies, specifically:
- dma_fence error state handling rework (Chris needs that for error
recovery)
- crc support locking changes (Tomeu's i915 crc patches need that).
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Also update Kconfig help text, explaining things:
Cirrus is obsolete, the hardware was designed in the 90ies
and can't keep up with todays needs. More background:
https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
Better alternatives are:
- stdvga (DRM_BOCHS, qemu -vga std, default in qemu 2.2+)
- qxl (DRM_QXL, qemu -vga qxl, works best with spice)
- virtio (VIRTIO_GPU), qemu -vga virtio)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio uses normal ram as backing storage for the framebuffer, so we
should assign the address to new screen_buffer (added by commit
17a7b0b4d9) instead of screen_base.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of scheduling the work to handle the initial delayed event, use 1s
delay.
This delay should not be needed, but Optimus/nouveau will fail in a
mysterious way if the delayed event is handled as soon as possible like it
is done in drm_helper_probe_single_connector_modes() in case the poll
was enabled before.
Reverting 339fd36238 would give back the 10 sec (!) delay to handle the
delayed event. Adding 1sec delay to the poll_work is enough to work around
the issue in Optimus setups and gives shorter response on handling the
initial delayed event.
Fixes: 339fd36238 ("drm: drm_probe_helper: Fix output_poll_work scheduling")
Cc: stable@vger.kernel.org # v4.9
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[danvet: Add FIXME to the comment to make it stick out more.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109143158.21917-1-peter.ujfalusi@ti.com
Declare exynos_drm_crtc_ops structures as const as they are only passed
as an argument to the function exynos_drm_crtc_create. This argument is
of type const struct exynos_drm_crtc_ops *, so exynos_drm_crtc_ops
structures having this property can be declared const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct exynos_drm_crtc_ops i@p={...};
@ok@
position p;
identifier r.i;
@@
exynos_drm_crtc_create(...,&i@p,...)
@bad@
position p!={r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
+const
struct exynos_drm_crtc_ops i;
File size before:
text data bss dec hex filename
5008 280 0 5288 14a8 exynos/exynos5433_drm_decon.o
File size after:
text data bss dec hex filename
5120 176 0 5296 14b0 exynos/exynos5433_drm_decon.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483984493-25284-1-git-send-email-bhumirks@gmail.com
The fence size/alignment is a combination of the vma size plus object
tiling parameters. Those parameters are rarely changed, making the fence
size/alignemnt roughly constant for the lifetime of the VMA. We can
simplify subsequent calculations by precalculating the size/alignment
required for GGTT vma taking fencing into account (with an update if we
do change the tiling or stride).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-4-chris@chris-wilson.co.uk
Single drm bridge fix.
* tag 'drm-misc-fixes-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc:
drm/bridge: analogix dp: Fix runtime PM state on driver bind
Back to regular -misc pulls with reasonable sizes:
- dma_fence error clarification (Chris)
- drm_crtc_from_index helper (Shawn), pile more patches on the m-l to roll
this out to drivers
- mmu-less support for fbdev helpers from Benjamin
- piles of kerneldoc work
- some polish for crc support from Tomeu and Benjamin
- odd misc stuff all over
* tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
dma-fence: Introduce drm_fence_set_error() helper
dma-fence: Wrap querying the fence->status
dma-fence: Clear fence->status during dma_fence_init()
drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"
drm: Change the return type of the unload hook to void
drm: add more document for drm_crtc_from_index()
drm: remove useless parameters from drm_pick_cmdline_mode function
drm: crc: Call wake_up_interruptible() each time there is a new CRC entry
drm: allow to use mmuless SoC
drm: compile drm_vm.c only when needed
fbmem: add a default get_fb_unmapped_area function
drm: crc: Wait for a frame before returning from open()
drm: Move locking into drm_debugfs_crtc_crc_add
drm/imx: imx-tve: Remove unused variable
Revert "drm: nouveau: fix build when LEDS_CLASS=m"
drm: Add kernel-doc for drm_crtc_commit_get/put
drm/atomic: Fix outdated comment.
drm: reference count event->completion
gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
drm: Document deprecated load/unload hook
...
More 4.11 stuff, holidays edition (i.e. not much):
- docs and cleanups for shared dpll code (Ander)
- some kerneldoc work (Chris)
- fbc by default on gen9+ too, yeah! (Paulo)
- fixes, polish and other small things all over gem code (Chris)
- and a few small things on top
Plus a backmerge, because Dave was enjoying time off too.
* tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel: (275 commits)
drm/i915: Update DRIVER_DATE to 20170109
drm/i915: Drain freed objects for mmap space exhaustion
drm/i915: Purge loose pages if we run out of DMA remap space
drm/i915: Fix phys pwrite for struct_mutex-less operation
drm/i915: Simplify testing for am-I-the-kernel-context?
drm/i915: Use range_overflows()
drm/i915: Use fixed-sized types for stolen
drm/i915: Use phys_addr_t for the address of stolen memory
drm/i915: Consolidate checks for memcpy-from-wc support
drm/i915: Only skip requests once a context is banned
drm/i915: Move a few more utility macros to i915_utils.h
drm/i915: Clear ret before unbinding in i915_gem_evict_something()
drm/i915/guc: Exclude the upper end of the Global GTT for the GuC
drm/i915: Move a few utility macros into a separate header
drm/i915/execlists: Reorder execlists register enabling
drm/i915: Assert that we do create the deferred context
drm/i915: Assert all timeline requests are gone before fini
drm/i915: Revoke fenced GTT mmapings across GPU reset
drm/i915: enable FBC on gen9+ too
drm/i915: actually drive the BDW reserved IDs
...
