We need to take care of the vop status when use
rockchip_drm_crtc_mode_config, if vop is disabled,
the function would failed, that is terrible.
Save output_type and output_mode into rockchip_crtc_state,
it's nice to make them into atomic.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: John Keeping <john@metanate.com>
We were accidentally returning PTR_ERR(NULL) which means success when we
wanted to return a negative error code.
Fixes: 412d4ae6b7 ('drm/rockchip: hdmi: add Innosilicon HDMI support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yakir Yang <ykk@rock-chips.com>
arm_iommu_attach_device() takes its own reference to the mapping we give
it. Since we do not keep a reference to the mapping ourselves, we must
release it before returning.
Also fix the error path, which fails to release the mapping if it has
called arm_iommu_detach_device() since that clears archdata.mapping.
Signed-off-by: John Keeping <john@metanate.com>
The call to arm_iommu_detach_device() on the previous line sets
dev->archdata.mapping to NULL so this call is always a no-op.
Signed-off-by: John Keeping <john@metanate.com>
There shouldn't be any other driver support necessary, since none of
the driver-specific ioctls ever required auth, and none of them deal
with modesetting.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We could possibly save a bit of power by not requesting gamma
conversion when the ramp happens to be 1:1, but at least if all the
CRTCs are off the SRAM will be disabled.
This should fix brightness sliders in a lot of fullscreen games.
Signed-off-by: Eric Anholt <eric@anholt.net>
This patch adds support for software clock gating to UVD 5
and UVD 6 blocks with a preliminary commented out hardware
gating routine.
Currently hardware gating does not work so it's not activated.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The values of all but the RADEON_HPD_NONE members of the radeon_hpd_id
enum transform 1:1 into bit positions within the 'enabled' bitset as
assembled by evergreen_hpd_init():
enabled |= 1 << radeon_connector->hpd.hpd;
However, if ->hpd.hpd happens to equal RADEON_HPD_NONE == 0xff, UBSAN
reports
UBSAN: Undefined behaviour in drivers/gpu/drm/radeon/evergreen.c:1867:16
shift exponent 255 is too large for 32-bit type 'int'
[...]
Call Trace:
[<ffffffff818c4d35>] dump_stack+0xbc/0x117
[<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
[<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e
[<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
[<ffffffffa0ba7f2e>] ? atom_execute_table+0x3e/0x50 [radeon]
[<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158
[<ffffffffa0b87700>] ? radeon_get_pll_use_mask+0x130/0x130 [radeon]
[<ffffffff81219930>] ? wake_up_klogd_work_func+0x60/0x60
[<ffffffff8121a35e>] ? vprintk_default+0x3e/0x60
[<ffffffffa0c603c4>] evergreen_hpd_init+0x274/0x2d0 [radeon]
[<ffffffffa0c603c4>] ? evergreen_hpd_init+0x274/0x2d0 [radeon]
[<ffffffffa0bd196e>] radeon_modeset_init+0x8ce/0x18d0 [radeon]
[<ffffffffa0b71d86>] radeon_driver_load_kms+0x186/0x350 [radeon]
[<ffffffffa03b6b16>] drm_dev_register+0xc6/0x100 [drm]
[<ffffffffa03bc8c4>] drm_get_pci_dev+0xe4/0x490 [drm]
[<ffffffff814b83f0>] ? kfree+0x220/0x370
[<ffffffffa0b687c2>] radeon_pci_probe+0x112/0x140 [radeon]
[...]
=====================================================================
radeon 0000:01:00.0: No connectors reported connected with modes
At least on x86, there should be no user-visible impact as there
1 << 0xff == 1 << (0xff & 31) == 1 << 31
holds and 31 > RADEON_MAX_HPD_PINS. Thus, this patch is a cosmetic one.
All of the above applies analogously to evergreen_hpd_fini(),
r100_hpd_init(), r100_hpd_fini(), r600_hpd_init(), r600_hpd_fini(),
rs600_hpd_init() and rs600_hpd_fini()
Silence UBSAN by checking ->hpd.hpd for RADEON_HPD_NONE before oring it
into the 'enabled' bitset in the *_init()- or the 'disabled' bitset in
the *_fini()-functions respectively.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is to fix fatal page fault error that occured if:
job is signaled/released after its timeout work is already
put to the global queue (in this case the cancel_delayed_work
will return false), which will lead to NX-protection error
page fault during job_timeout_func.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two callbacks to scheduler to maintain jobs, and invoked for
job timeout calculations. Now TDR measures time gap from
job is processed by hw.
v2:
fix typo
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
original time out detect routine is incorrect, cuz it measures
the gap from job scheduled, but we should only measure the
gap from processed by hw.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the mirror_list will be used for later time out detect
feature. This is needed to properly detect a GPU
timeout with the scheduler.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for those jobs submitted through scheduler, do not
free it immediately after scheduled, instead free it
in global workqueue by its sched fence signaling
callback function.
v2:
call uf's bo_undef after job_run()
call job's sync free after job_run()
no static inline __amdgpu_job_free() anymore, just use
kfree(job) to replace it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consolidate job initialization in one place rather than
duplicating it in multiple places.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, like when freezing for hibernation, we need to be
able to force hard reset even if no engine are stuck. This patch
add a bool option to current asic reset callback to allow to force
hard reset on asic that supports it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
