It appears these don't map to PBDMAs (at least on Kepler, it may or may
be valid for Fermi - this hasn't been checked), but to runlists.
This drops the NVKM_ENGINE_FIFO data from the entries too, as resetting
all of PFIFO is *not* the way to handle such faults.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
With the addition of PTOP-specified reset bits, it makes more sense to
move the definitions here rather than in individual subdev
implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When we start communicating with the pmu a bit more, the current code is
a real issue. I encountered a dead lock here, while testing my dynamic
reclocking code
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In case of successful suspend, devinit will have to be run and this is
the behavior currently hardcoded. However, as FD bug 94725 suggests,
there might be cases where runtime suspend leaves the GPU powered, and
in such cases devinit should not be run on resume.
On GF100+ we have a reliable way to know whether we need to run devinit.
Use it instead of blindly trusting the flag set by nvkm_devinit_fini().
The code around the NvForcePost also needs to be slightly reworked in
order to keep working.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Suggested-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Originally DSS only had DSI PLLs, and thus the DPI driver has functions
and variables that refer to DSI or DSI PLL. Now we support DSI, VIDEO
and HDMI PLLs, so it's time to remove the DSI references from the code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Type A and B PLLs require a bit different calculations for the clock
rates. DPI driver supports only type A PLLs.
This patch adds support for the type B PLL.
Type B PLLs are simpler than type A, as type B can produce a good clock
for almost any rate. Thus we can just ask it to produce the pixel clock
and use one as LCK and PCK dividers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
dss_pll_calc_b() takes HDMI TMDS clock rate as a parameter. To make
dss_pll_calc_b() usable for non-HDMI users, change the function to take
clkout rate as parameter, and also change the current users of
dss_pll_calc_b() to accommodate that.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Move hdmi_pll_compute(), used to calculate the config for HDMI PLL, from
hdmi_pll.c to pll.c, with the name of dss_pll_calc_b(), to make it
available to non-HDMI users.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add a "_a" postfix to the type A PLL calc functions, to differentiate
them from the type B PLL calculations which we will add shortly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
To make it possible to use HDMI PLL for other video outputs than HDMI,
the HDMI PLL code needs to do runtime_get/put for the HDMI IP, so that
the IP (include the PLL) is enabled.
To do that we also need to store the HDMI pdev in the hdmi_pll_data.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DPI driver uses a fixed clkout index, 0. This has worked fine as the
first clkout is usually used.
To generalize the code and to support additional clock sources, change
the code to use dss_pll_get_clkout_idx_for_src() to get the clkout
index.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We can clean up the DPI driver's clock source handling by using the
dss_clk_source instead of only a dss_pll pointer.
This will also make it possible to use additional clock sources, like
PLL1_3 or HDMI_PLL, which the code did not support earlier.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
With the new PLL helpers, we can clean up the dispc_fclk_rate(). This
will also make dispc_fclk_rate() support clock sources it didn't support
earlier.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
With the new PLL helpers, we can clean up the dispc_mgr_lclk_rate().
This will also make dispc_mgr_lclk_rate() support clock sources it
didn't support earlier.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add two PLL helper functions:
dss_pll_find_by_src() which returns the dss_pll for the given
dss_clk_source.
dss_pll_get_clkout_idx_for_src() which returns the clkout index for the
given dss_clk_source.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The code to set the clock muxes for DISPC's LCD clock inputs is very
confusing. Especially on DRA7, there's an additional clock muxing that
needs to be done, which at the moment is done in dpi.c using
dss_ctrl_pll_set_control_mux().
Clean this all up by:
- Using dss_clk_source instead of dss_pll_id, as dss_pll_id doesn't
specify the clock source quite correctly.
- Splitting the dss_select_lcd_clk_source() up into DSS version specific
helper functions.
- Using dss_ctrl_pll_set_control_mux() from the helper functions, so
that dpi.c doesn't have to call it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DSS uses two types of PLLs, type A (DSI & Video) and type B (HDMI). The
two types behave slightly differently, but we don't have the type of the
PLL available anywhere for the driver.
This patch adds an enum for the PLL type and a field in the PLL's HW
data to store it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
enum dss_clk_source does not have values for all clock sources available
on OMAP4+ DSS versions. Add the missing clock sources.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The names of the enum dss_clk_source's values are legacy names, only
correct for OMAP3 DSS. Rename the names to more generic ones.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Now that there is no "non-generic" version of the function to get the
clock source name, lets rename dss_get_generic_clk_source_name() to
dss_get_clk_source_name().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We have two functions to return a name for clock sources for debugging
purposes: dss_feat_get_clk_source_name() and
dss_get_generic_clk_source_name().
The former is supposed to return a DSS IP version specific name for the
clock source, and the latter is supposed to return a more generic name.
All this seems a bit pointless, so let's remove the former one.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
'enum omap_dss_clk_source' is internal to dss. Let's rename it to
'dss_clk_source' match our naming convention.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
At the moment 'enum omap_dss_clk_source' is in omapdss.h, shared by
omapdrm and omapfb. We're about to improve the omapdrm clock code, so we
need to make a separate copy of the enum for each driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
