Various cleanups to the DRM core initialization and exit handlers:
- Register chrdev last: Once register_chrdev() returns, open() will
succeed on the given chrdevs. This is usually not an issue, as no
chardevs are registered, yet. However, nodes can be created by
user-space via mknod(2), even though such major/minor combinations are
unknown to the kernel. Avoid calling into drm_stub_open() in those
cases.
Again, drm_stub_open() would just bail out as the inode is unknown,
but it's really non-obvious if you hack on drm_stub_open().
- Unify error-paths into just one label. All the error-path helpers can
be called even though the constructors were not called yet, or failed.
Hence, just call all cleanups unconditionally.
- Call into drm_global_release(). This is a no-op, but provides
debugging helpers in case there're GLOBALS left on module unload. This
function was unused until now.
- Use DRM_ERROR() instead of printk(), and also print the error-code on
failure (even if it is static!).
- Don't throw away error-codes of register_chrdev()!
- Don't hardcode -1 as errno. This is just plain wrong.
- Order exit-handlers in the exact reverse order of initialization
(except if the order actually matters for syncing-reasons, which is
not the case here, though).
v2:
- Call drm_core_exit() directly from the init-error-handler. Requires to
drop __exit annotation, though.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-7-dh.herrmann@gmail.com
The drm_core.h header contains a set of constants meant to be used
throughout DRM. However, as it turns out, they're each used just once and
don't bring any benefit. They're also grossly mis-named and lack
name-spacing. This patch inlines them, or moves them into drm_internal.h
as appropriate:
- CORE_AUTHOR and CORE_DESC are inlined into corresponding MODULE_*()
macros. It's just confusing having to follow 2 pointers when trying to
find the definition of these fields. Grep'ping for MODULE_AUTHOR()
should reveal the full information, if there's no strong reason not to.
- CORE_NAME, CORE_DATE, CORE_MAJOR, CORE_MINOR, and CORE_PATCHLEVEL are
inlined into the sysfs 'version' attribute. They're stripped
everywhere else (which is just some printk() statements). CORE_NAME
just doesn't make *any* sense, as we hard-code it in many places,
anyway. The other constants are outdated and just serve
binary-compatibility purposes. Hence, inline them in 'version' sysfs
attribute (we might even try dropping it..).
- DRM_IF_MAJOR and DRM_IF_MINOR are moved into drm_internal.h as they're
only used by the global ioctl handlers. Furthermore, versioning
interfaces breaks backports and as such is deprecated, anyway. We just
keep them for historic reasons. I doubt anyone will ever modify them
again.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-6-dh.herrmann@gmail.com
Each DRM file-context caches the EUID of the process that opened the file.
It is used exclusively for debugging purposes in /proc/dri/ and friends.
Note, however, that we can already fetch the EUID from
priv->pid->task->creds. The pointer-chasing will not hurt us, since it is
only about debugging, anyway.
Since we already are in an rcu-read-side, we can use __task_cred() rather
than task_cred_xxx().
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-2-dh.herrmann@gmail.com
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an
unaligned 64 bit field (modifier). This get packed differently between
32 bit and 64 bit modes on architectures that can handle unaligned 64
bit access (X86 and IA64). Other architectures pack the structs the
same and don't need the compat wrapper. Use the same condition for
drm_mode_fb_cmd2 as we use for drm_update_draw.
Note that only the modifier will be packed differently between compat
and non-compat versions.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
[seanpaul added not at bottom of commit msg re: modifier]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just random misc stuff that Sean/Sumit&Archit picked up while I relaxed.
Well except for one commit:
* tag 'topic/drm-misc-2016-09-19' of git://anongit.freedesktop.org/drm-intel:
drm: Only use compat ioctl for addfb2 on X86/IA64
drm/qxl: squash lines for simple wrapper functions
drm/bridge: analogix_dp: squash lines for simple wrapper functions
drm/radeon: squash lines for simple wrapper functions
drm/amdgpu: squash lines for simple wrapper functions
dma-buf/sync-file: Avoid enable fence signaling if poll(.timeout=0)
drm/fence: allow fence waiting to be interrupted by userspace
drm: Move property validation to a helper, v2.
drm/bridge: adv7511: add support for the 2nd chip
The change adds support of internal HDMI I2C master controller, this
subdevice is used by default, if "ddc-i2c-bus" DT property is omitted.
The main purpose of this functionality is to support reading EDID from
an HDMI monitor on boards, which don't have an I2C bus connected to
DDC pins.
The current implementation does not support "I2C Master Interface
Extended Read Mode" to read data addressed by non-zero segment
pointer, this means that if EDID has more than 1 extension blocks,
EDID reading operation won't succeed, in my practice all tested HDMI
monitors have at maximum one extension block.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This change is needed to properly lock I2C bus driver, which serves
DDC.
The change fixes an overflow over zero of I2C bus driver user counter:
root@imx6q:~# lsmod
Not tainted
dw_hdmi_ahb_audio 4082 0 - Live 0xbf02c000
dw_hdmi_imx 3498 0 - Live 0xbf00d000
dw_hdmi 16398 2 dw_hdmi_ahb_audio,dw_hdmi_imx, Live 0xbf004000
i2c_imx 16687 0 - Live 0xbf017000
root@imx6q:~# rmmod dw_hdmi_imx
root@imx6q:~# lsmod
Not tainted
dw_hdmi_ahb_audio 4082 0 - Live 0xbf02c000
dw_hdmi 16398 1 dw_hdmi_ahb_audio, Live 0xbf004000
i2c_imx 16687 -1 - Live 0xbf017000
^^
root@imx6q:~# rmmod i2c_imx
rmmod: ERROR: Module i2c_imx is in use
Note that prior to this change put_device() coupled with
of_find_i2c_adapter_by_node() was missing on error path of
dw_hdmi_bind(), added i2c_put_adapter() there along with the change.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When CONFIG_PM is not set, we get a warning about an unused function:
drivers/gpu/drm/exynos/exynos_drm_gsc.c:1219:12: error: 'gsc_clk_ctrl' defined but not used [-Werror=unused-function]
static int gsc_clk_ctrl(struct gsc_context *ctx, bool enable)
^~~~~~~~~~~~
This removes the two #ifdef checks in this file and instead marks the
functions as __maybe_unused, which is a more reliable way of doing the
same, allowing better build coverage and avoiding the warning above.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The dot clock divider is 7 bits wide, and the divider range is 1 ~ 127,
or 6 ~ 127 if phase offsets are used. The 0 register value also
represents a divider of 1 or bypass.
Make the end condition of the for loop inclusive of 127 in the
round_rate callback.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
When reading back the divider set in the register, we mask off the
bits that aren't part of the divider. Unfortunately the mask used
here was not converted from the field width.
Fix this by converting the field width to a proper bit mask.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Move code from system sleep pm to runtime pm callbacks to ensure proper
driver state preservation when device is under power domain. Then, use
generic helpers for using runtime pm for system sleep pm.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use generic helpers instead of open-coding usage of runtime pm for system
sleep pm, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use generic helpers instead of open-coding usage of runtime pm for system
sleep pm, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
