Currently, the code sets the "pll" to the desired multiple
of the pixel clock manully(4*3m 8*3,etc). The valid range
of the pll is 1G-2G, however, when the pixel clock is bigger
than 167MHz, the "pll" will be set to a invalid value( > 2G),
then the "pll" will be 2GHz, thus the pixel clock will be in
correct. Change the factor to make the "pll" be set in the
(1G, 2G) range.
Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
In order to improve 4K resolution performance,
we have to enhance the HDMI driving current
when clock rate is greater than 165MHz.
Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
The mtk_hdmi_send_infoframe have to
be run after PLL and PIXEL clock of HDMI enable.
Make sure that HDMI inforframes can be sent
successfully.
Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
To make sure that the first vblank IRQ after enabling
vblank isn't too short or immediate, we have to clear
the IRQ status before enable OVL interrupt.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
MTK DRM driver didn't set the vblank_disable_allowed to
true, it cause that the irq_handler is called every
16.6 ms (every vblank) when the display didn't be updated.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
If we want to set the hardware OD to relay mode,
we have to set OD_CFG register rather than
OD_RELAYMODE; otherwise, the system will access
the wrong address.
Fixes: 7216436420 ("drm/mediatek: set mt8173 dithering function")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Pull drm fixes from Dave Airlie:
"Just had a couple of amdgpu fixes and one core fix I wanted to get out
early to fix some regressions.
I'm sure I'll have more stuff this week for -rc2"
* tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux: (22 commits)
drm: Print device information again in debugfs
drm/amd/powerplay: fix bug stop dpm can't work on Vi.
drm/amd/powerplay: notify smu no display by default.
drm/amdgpu/dpm: implement thermal sensor for CZ/ST
drm/amdgpu/powerplay: implement thermal sensor for CZ/ST
drm/amdgpu: disable smu hw first on tear down
drm/amdgpu: fix amdgpu_need_full_reset (v2)
drm/amdgpu/si_dpm: Limit clocks on HD86xx part
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amdgpu: potential NULL dereference in debugfs code
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amd/powerplay: fix static checker warnings in iceland_smc.c
drm/radeon: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: clarify UVD/VCE special handling for CG
drm/amd/amdgpu: enable clockgating only after late init
drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
drm/amdgpu/gfx8: fix CGCG_CGLS handling
drm/radeon: fix modeset tear down code
...
When handling execbuf relocations, we play a delicate dance with
pagefault. We first try to access the user pages underneath our
struct_mutex. However, if those pages were inside a GEM object, we may
trigger a pagefault and deadlock as i915_gem_fault() tries to
recursively acquire struct_mutex. Instead, we choose to disable
pagefaulting around the copy_from_user whilst inside the struct_mutex
and handle the EFAULT by falling back to a copy outside the
struct_mutex.
We however presumed that disabling pagefaults would be expensive. It is
just an operation on the local current task. Cheap enough that we can
restrict the disable/enable to the critical section around the copy, and
so avoid having to handle the atomic sections within the relocation
handling itself.
v2: Just illustrate the broken error handling rather than argue why it
is safer to ignore it, for now.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161018120251.25043-4-chris@chris-wilson.co.uk
The driver is the last users of the drm_fb_get_bpp_depth() function. It
should ideally be converted to use struct drm_mode_fb_cmd2 instead of
the legacy struct drm_mode_fb_cmd internally, but that will require
broad changes across the code base. As a first step, replace
drm_fb_get_bpp_depth() with drm_format_info() in order to stop exporting
the function to drivers.
The new DRM_ERROR() message comes from the vmw_create_dmabuf_proxy(),
vmw_kms_new_framebuffer_surface() and vmw_kms_new_framebuffer_dmabuf()
functions that currently print an error if the pixel format is
unsupported.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-12-git-send-email-laurent.pinchart@ideasonboard.com
The driver uses drm_fb_get_bpp_depth() to check whether it can support
the format requested by userspace when creating a framebuffer. This
isn't the right API, as it doesn't differentiate between RGB formats
other than on a depth and bpp basis.
Fixing this requires non trivial changes to the drivers internals. As a
first step, replace usage of the drm_fb_get_bpp_depth() function with an
equivalent check based on drm_format_info(). This is part of a wider
effort to remove usage of the drm_fb_get_bpp_depth() function in
drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-9-git-send-email-laurent.pinchart@ideasonboard.com
The format helpers have historically treated unsupported formats as part
of the default case, returning values that are likely wrong. We can't
change this behaviour now without risking breaking drivers in difficult
to detect ways, but we can WARN on unsupported formats to catch faulty
callers.
The only exception is the framebuffer_check() function that calls
drm_format_info() to validate the format passed from userspace. This is
a valid use case that shouldn't generate a warning.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-5-git-send-email-laurent.pinchart@ideasonboard.com
Many GEN9 boards come with on-board lspcon cards.
Fot these boards, VBT configuration should properly point out
if a particular port contains lspcon device, so that driver can
initialize it properly.
This patch adds a utility function, which checks the VBT flag
for lspcon bit, and tells us if a port is configured to have a
lspcon device or not.
V2: Fixed review comments from Ville
- Do not forget PORT_D while checking lspcon for GEN9
V3: Addressed review comments from Rodrigo
- Create a HAS_LSPCON() macro for better use case handling.
- Do not dump warnings for non-gen-9 platforms, it will be noise.
V4: Rebase
V5: Rebase
V6: Pass dev_priv to HAS_LSPCON() macro
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-4-git-send-email-shashank.sharma@intel.com
This patch adds a new file, to accommodate lspcon support
for I915 driver. These functions probe, detect, initialize
and configure an on-board lspcon device during the driver
init time.
Also, this patch adds a small structure for lspcon device,
which will provide the runtime status of the device.
V2: addressed ville's review comments
- Clean the leftover macros from previous patch set
V3: Rebase
V4: addressed ville's review comments
- make internal functions static
- remove lspcon_detect_identifier, make it inline with lspcon_probe
- remove is_lspcon_active function
- remove force check while setting a lspcon mode
V5: Rebase
V6: Pass dev_priv to IS_GEN9 check
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-3-git-send-email-shashank.sharma@intel.com
This patch adds lspcon support in dp_dual_mode helper.
lspcon is essentially a dp->hdmi dongle with dual personality.
LS mode: It works as a passive dongle, by level shifting DP++
signals to HDMI signals, in LS mode.
PCON mode: It works as a protocol converter active dongle
in pcon mode, by converting DP++ outputs to HDMI 2.0 outputs.
This patch adds support for lspcon detection and mode set
switch operations, as a dp dual mode dongle.
v2: Addressed review comments from Ville
- add adaptor id for lspcon devices (0x08), use it to identify lspcon
- change function names
old: drm_lspcon_get_current_mode/drm_lspcon_change_mode
new: drm_lspcon_get_mode/drm_lspcon_set_mode
- change drm_lspcon_get_mode type to int, to match
drm_dp_dual_mode_get_tmds_output
- change 'err' to 'ret' to match the rest of the functions
- remove pointless typecasting during call to dual_mode_read
- fix the but while setting value of data, while writing lspcon mode
- fix indentation
- change mdelay(10) -> msleep(10)
- return ETIMEDOUT instead of EFAULT, when lspcon mode change times out
- Add an empty line to separate std regs macros and lspcon regs macros
Indent bit definition
v3: Addressed review comments from Rodrigo
- change macro name from DP_DUAL_MODE_TYPE_LSPCON to
DP_DUAL_MODE_TYPE_HAS_DPCD for better readability
- change macro name from DP_DUAL_MODE_LSPCON_MODE_PCON to
DP_DUAL_MODE_LSPCON_MODE_PCON for better readability
- add comment for MCA specific offsets like 0x40 and 0x41
- remove DP_DUAL_MODE_REV_TYPE2 check while checking lspcon adapter id
v4: Addressed review comments from Ville
- Fixed indentation at few places
- s/current_mode/mode
- s/reqd_mode/mode
- remove unnecessary void* cast
- remove drm_edid.h from includes
- Add a comment for _HAS_DPCD
- Fix enum description, for lspcon_mode.
v5: Rebase
v6: Rebase
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476720277-16298-1-git-send-email-shashank.sharma@intel.com
Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's
relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which
are the two YUV pixel formats we support only), otherwise, we are likely to
trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is
probably not YU12 or YV12.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150
Fixes: c6c1f9bc79 ("drm/imx: Add active plane reconfiguration support")
Cc: stable@vger.kernel.org # 4.8
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We added active plane reconfiguration support by forcing a full modeset
operation. So, looking at old_plane_state->fb to determine whether we need
to set u/v offset(aka, u/vbo for IPUv3) in ipu_plane_atomic_set_base()
or not is no more correct. Instead, we should do that only when we don't
need modeset.
Fixes: c6c1f9bc79 ("drm/imx: Add active plane reconfiguration support")
Cc: stable@vger.kernel.org # 4.8
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We added active plane reconfiguration support by forcing a full modeset
operation. So, looking at old_plane_state->fb to determine whether we need to
switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base()
or not is no more correct. Instead, we should do that only when we don't need
modeset, otherwise, we initialize the two EBA buffers with the buffer address.
Fixes: c6c1f9bc79 ("drm/imx: Add active plane reconfiguration support")
Cc: stable@vger.kernel.org # 4.8
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
gcc warns about the timestamp in drm_wait_vblank being possibly
used without an initialization:
drivers/gpu/drm/drm_irq.c: In function 'drm_crtc_send_vblank_event':
drivers/gpu/drm/drm_irq.c:992:24: error: 'now.tv_usec' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/drm_irq.c:1069:17: note: 'now.tv_usec' was declared here
drivers/gpu/drm/drm_irq.c:991:23: error: 'now.tv_sec' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This can happen if drm_vblank_count_and_time() returns 0 in its
error path. To sanitize the error case, I'm changing that function
to return a zero timestamp when it fails.
Fixes: e6ae8687a8 ("drm: idiot-proof vblank")
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161017221355.1861551-6-arnd@arndb.de
If the allocation fails the current code returns success. If
copy_from_user() fails it returns the number of bytes remaining instead
of -EFAULT.
Fixes: d5b1a78a77 ("drm/vc4: Add support for drawing 3D frames.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Adds files and directories to debugfs for controlling and reading frame
CRCs, per CRTC:
dri/0/crtc-0/crc
dri/0/crtc-0/crc/control
dri/0/crtc-0/crc/data
Drivers can implement the set_crc_source callback() in drm_crtc_funcs to
start and stop generating frame CRCs and can add entries to the output
by calling drm_crtc_add_crc_entry.
v2:
- Lots of good fixes suggested by Thierry.
- Added documentation.
- Changed the debugfs layout.
- Moved to allocate the entries circular queue once when frame
generation gets enabled for the first time.
v3:
- Use the control file just to select the source, and start and stop
capture when the data file is opened and closed, respectively.
- Make variable the number of CRC values per entry, per source.
- Allocate entries queue each time we start capturing as now there
isn't a fixed number of CRC values per entry.
- Store the frame counter in the data file as a 8-digit hex number.
- For sources that cannot provide useful frame numbers, place
XXXXXXXX in the frame field.
v4:
- Build only if CONFIG_DEBUG_FS is enabled.
- Use memdup_user_nul.
- Consolidate calculation of the size of an entry in a helper.
- Add 0x prefix to hex numbers in the data file.
- Remove unnecessary snprintf and strlen usage in read callback.
v5:
- Made the crcs array in drm_crtc_crc_entry fixed-size
- Lots of other smaller improvements suggested by Emil Velikov
v7:
- Move definition of drm_debugfs_crtc_crc_add to drm_internal.h
v8:
- Call debugfs_remove_recursive when we fail to create the minor
device
v9:
- Register the debugfs directory for a crtc from
drm_crtc_register_all()
v10:
- Don't let debugfs failures interrupt CRTC registration (Emil
Velikov)
v11:
- Remove extra brace that broke compilation. Sorry!
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
