gvt-next-2016-10-27
- Resolve current left build issue with ACPI=n and 32bit kernel
- TLB workaround from Arkadiusz
- vGPU reset fix from Ping
- workload scheduler nesting sleep fix from Changbin
- more misc fixes for sparse warnings and cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We cannot use blocking method mutex_lock inside a wait loop.
Here we invoke pick_next_workload() which needs acquire a
mutex in our "condition" experssion. Then we go into a another
of the going-to-sleep sequence and changing the task state.
This is a dangerous. Let's rewrite the wait sequence to avoid
nested sleeping.
v2: fix do...while loop exit condition (zhenyu)
v3: rebase to gvt-staging branch
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
throw error message in elsp emulation handler basing on execlist
submit result. guest will trigger tdr process for recovering, gvt
just follow guest's desire.
v2: populate error to top of mmio emulation logic, comments from
zhenyu
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Full vGPU reset need to release all the shadow PPGGT pages to avoid
unnecessary write-protect and also should re-initialize pvinfo after
resetting vregs to keep pvinfo correct.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
the value of last_mclk_dpm_enable_mask will be changed if
other clients(vce,dal) trigger set power state between enable
and disable uvd dpm.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The i2c adapter is only relevant for some peer device types, so
let's clear the pdt if it's still the same as the old_pdt when we
tear down the i2c adapter.
I don't really like this design pattern of updating port->whatever
before doing the accompanying changes and passing around old_whatever
to figure stuff out. Would make much more sense to me to the pass the
new value around and only update the port->whatever when things are
consistent. But let's try to work with what we have right now.
Quoting a follow-up from Ville:
"And naturally I forgot to amend the commit message w.r.t. this guy
[the change in drm_dp_destroy_port]. We don't really need to do this
here, but I figured I'd try to be a bit more consistent by having it,
just to avoid accidental mistakes if/when someone changes this stuff
again later."
v2: Clear port->pdt in the caller, if needed (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com> (v1)
Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com
The fbdev helper code keeps around two lists of connectors. One is the
list of all connectors it could use, and that list already holds
references for all the connectors. However the other list, or rather
lists, is the one actively being used. That list is tracked per-crtc
and currently doesn't hold any extra references. Let's grab those
extra references to avoid oopsing when the connector vanishes. The
list of all possible connectors should get updated when the hpd happens,
but the list of actively used connectors would not get updated until
the next time the fb-helper picks through the set of possible connectors.
And so we need to hang on to the connectors until that time.
Since we need to clean up in drm_fb_helper_crtc_free() as well,
let's pull the code to a common place. And while at it let's
pull in up the modeset->mode cleanup in there as well. The case
of modeset->fb is a bit less clear. I'm thinking we should probably
hold a reference to it, but for now I just slapped on a FIXME.
v2: Cleanup things drm_fb_helper_crtc_free() too (Chris)
v3: Don't leak modeset->connectors (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com> (v1)
Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com
Pass the framebuffer size in .16 fixed point coordinates to
drm_rect_rotate() since that's what the source coordinates are as well
at this stage. We used to do this part of the computation in integer
coordinates, but that got changed when moving the computation to
happen in the check phase of the operation. Unfortunately I forgot
to shift up the fb width and height appropriately.
With the bogus size we ended up with some negative fb offset, which when
added to the vma offset caused out scanout to start at an offset earlier
than we inteded. Eg. when testing on my SKL I saw a row of incorrect
tiles at the top of my screen.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
On my APL the LSPCON firmware resumes in PCON mode as opposed to the
expected LS mode. It also appears to be in a state where AUX DPCD reads
will succeed but return garbage recovering only after a few hundreds of
milliseconds. After the recovery time DPCD reads will result in the
correct values and things will continue to work. If I2C over AUX is
attempted during this recovery time (implying an AUX write transaction)
the firmware won't recover and will stay in this broken state.
As a workaround check if the firmware is in PCON state after resume and
if so wait until the correct DPCD values are returned. For this we
compare the branch descriptor with the one we cached during init time.
If the firmware was in the LS state, we skip the w/a and continue as
before.
v2:
- Use the DP descriptor value cached in intel_dp. (Jani)
- Get to intel_dp using container_of(), instead of a cached ptr.
(Shashank)
- Use usleep_range() instead of msleep().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98353
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-9-git-send-email-imre.deak@intel.com
When modeset occurs and the LS_CLK is set to some special values in DP
mode, the N/M need to be set manually if audio is playing. Otherwise the
first several seconds may be silent in audio playback.
The relationship of Maud and Naud is expressed in the following
equation:
Maud/Naud = 512 * fs / f_LS_Clk
Please refer VESA DisplayPort Standard spec for details.
v2 by Jani:
- organize Maud/Naud table according to DP 1.4 spec
- add 64k and 128k audio rates
- update HSW_AUD_M_CTS_ENABLE register when Maud not found
- remove extra checks for port clock
- simplify Maud/Naud lookup
- reset patch author back to Libin
Cc: "Zhang, Keqiao" <keqiao.zhang@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477407258-30599-3-git-send-email-jani.nikula@intel.com
Since 4.7 kernel, we've seen the error messages like
kernel: [TTM] Buffer eviction failed
kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001)
kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO
on QXL when switching and accessing on VT. The culprit was the
generic deferred_io code (qxl driver switched to it since 4.7).
There is a race between the dirty clip update and the call of
callback.
In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock,
while it kicks off the update worker outside the spinlock. Meanwhile
the update worker clears the dirty clip in the spinlock, too. Thus,
when drm_fb_helper_dirty() is called concurrently, schedule_work() is
called after the clip is cleared in the first worker call.
This patch addresses it by validating the clip before calling the
dirty fb callback.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98322
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1003298
Fixes: eaa434defa ('drm/fb-helper: Add fb_deferred_io support')
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161020150530.5787-1-tiwai@suse.de
We do not need to set up a fence for the rotated view.
Display does not need it and no one can access it.
v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d098d ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
This fixes a regression in all these drivers since the cache
mode tracking was fixed for mixed mappings. It uses the new
arch API to add the VRAM range to the PAT mapping tracking
tables.
Fixes: 87744ab383 (mm: fix cache mode tracking in vm_insert_mixed())
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The current_vgpu will set to NULL after stopping the scheduler when
the reset is triggered by current vgpu, so here need change the
judgement condition for current vgpu detection.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The emulation handler for MMIO GDRST miss vreg write in it, as result
the vreg cannot update correspondingly.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are
pinned in mappable aperture portion of GGTT and for ringbuffer pages
allocated from Stolen memory, access can only be done through GMADR BAR.
In case of GuC based submission, updates done in ringbuffer via GMADR
may not get committed to memory by the time the Command streamer starts
reading them, resulting in fetching of stale data.
For Host based submission, such problem is not there as the write to Ring
Tail or ELSP register happens from the Host side prior to submission.
Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already
enforces the ordering between outstanding GMADR writes & new GTTMADR access.
MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to
registers within GT is contained within GT, so ordering is not enforced
resulting in a race, which can manifest in form of a hang.
To ensure the flush of in-flight GMADR writes, a POSTING READ is done to
GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(),
which takes care of GMADR writes from User space to GEM buffers, but not the
ringbuffer writes from KMD.
This WA is needed on all recent HW.
v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie
in any forcewake domain range and so the overhead of spinlock & search
in the forcewake table is avoidable. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413323-1880-1-git-send-email-akash.goel@intel.com
This way the driver can decide if it is valuable to evict a BO or not.
The current implementation is added as default to all existing drivers.
v2: fix some typos found during internal testing
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
