Intel has an architectural guarantee that the TLB entry causing
a page fault gets invalidated automatically. This means
we should be able to drop the local TLB invalidation.
Because of the way other areas of the page fault code work,
chances are good that all x86 CPUs do this. However, if
someone somewhere has an x86 CPU that does not invalidate
the TLB entry causing a page fault, this one-liner should
be easy to revert.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
The function ptep_set_access_flags() is only ever invoked to set access
flags or add write permission on a PTE. The write bit is only ever set
together with the dirty bit.
Because we only ever upgrade a PTE, it is safe to skip flushing entries on
remote TLBs. The worst that can happen is a spurious page fault on other
CPUs, which would flush that TLB entry.
Lazily letting another CPU incur a spurious page fault occasionally is
(much!) cheaper than aggressively flushing everybody else's TLB.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.
Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Conflicts:
arch/x86/kernel/ptrace.c
Pull the latest RCU tree from Paul E. McKenney:
" The major features of this series are:
1. A first version of no-callbacks CPUs. This version prohibits
offlining CPU 0, but only when enabled via CONFIG_RCU_NOCB_CPU=y.
Relaxing this constraint is in progress, but not yet ready
for prime time. These commits were posted to LKML at
https://lkml.org/lkml/2012/10/30/724, and are at branch rcu/nocb.
2. Changes to SRCU that allows statically initialized srcu_struct
structures. These commits were posted to LKML at
https://lkml.org/lkml/2012/10/30/296, and are at branch rcu/srcu.
3. Restructuring of RCU's debugfs output. These commits were posted
to LKML at https://lkml.org/lkml/2012/10/30/341, and are at
branch rcu/tracing.
4. Additional CPU-hotplug/RCU improvements, posted to LKML at
https://lkml.org/lkml/2012/10/30/327, and are at branch rcu/hotplug.
Note that the commit eliminating __stop_machine() was judged to
be too-high of risk, so is deferred to 3.9.
5. Changes to RCU's idle interface, most notably a new module
parameter that redirects normal grace-period operations to
their expedited equivalents. These were posted to LKML at
https://lkml.org/lkml/2012/10/30/739, and are at branch rcu/idle.
6. Additional diagnostics for RCU's CPU stall warning facility,
posted to LKML at https://lkml.org/lkml/2012/10/30/315, and
are at branch rcu/stall. The most notable change reduces the
default RCU CPU stall-warning time from 60 seconds to 21 seconds,
so that it once again happens sooner than the softlockup timeout.
7. Documentation updates, which were posted to LKML at
https://lkml.org/lkml/2012/10/30/280, and are at branch rcu/doc.
A couple of late-breaking changes were posted at
https://lkml.org/lkml/2012/11/16/634 and
https://lkml.org/lkml/2012/11/16/547.
8. Miscellaneous fixes, which were posted to LKML at
https://lkml.org/lkml/2012/10/30/309, along with a late-breaking
change posted at Fri, 16 Nov 2012 11:26:25 -0800 with message-ID
<20121116192625.GA447@linux.vnet.ibm.com>, but which lkml.org
seems to have missed. These are at branch rcu/fixes.
9. Finally, a fix for an lockdep-RCU splat was posted to LKML
at https://lkml.org/lkml/2012/11/7/486. This is at rcu/next. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Create a new subsystem that probes on kernel boundaries
to keep track of the transitions between level contexts
with two basic initial contexts: user or kernel.
This is an abstraction of some RCU code that use such tracking
to implement its userspace extended quiescent state.
We need to pull this up from RCU into this new level of indirection
because this tracking is also going to be used to implement an "on
demand" generic virtual cputime accounting. A necessary step to
shutdown the tick while still accounting the cputime.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
[ paulmck: fix whitespace error and email address. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now NO_BOOTMEM version free_all_bootmem_node() does not really
do free_bootmem at all, and it only call register_page_bootmem_info_node
instead.
That is confusing, try to kill that free_all_bootmem_node().
Before that, this patch will remove numa_free_all_bootmem().
That function could be replaced with register_page_bootmem_info() and
free_all_bootmem();
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-43-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
after_bootmem has different meaning in 32bit and 64bit.
32bit: after bootmem is ready
64bit: after bootmem is distroyed
Let's merget them make 32bit the same as 64bit.
for 32bit, it is mixing alloc_bootmem_pages, and alloc_low_page under
after_bootmem is set or not set.
alloc_bootmem is just wrapper for memblock for x86.
Now we have alloc_low_page() with memblock too. We can drop bootmem path
now, and only alloc_low_page only.
At the same time, we make alloc_low_page could handle real after_bootmem
for 32bit, because alloc_bootmem_pages could fallback to use slab too.
At last move after_bootmem set position for 32bit the same as 64bit.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-40-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
During test patch that adjust page_size_mask to map small range ram with
big page size, found page table is setup wrongly for 32bit. And
native_pagetable_init wrong clear pte for pmd with large page support.
1. add more comments about why we are expecting pte.
2. add BUG checking, so next time we could find problem earlier
when we mess up page table setup again.
3. max_low_pfn is not included boundary for low memory mapping.
We should check from max_low_pfn instead of +1.
4. add print out when some pte really get cleared, or we should use
WARN() to find out why above max_low_pfn get mapped? so we could
fix it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-35-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
On 32bit, before patcheset that only set page table for ram, we only
call that one time.
Now, we are calling that during every init_memory_mapping if we have holes
under max_low_pfn.
We should only call it one time after all ranges under max_low_page get
mapped just like we did before.
Also that could avoid the risk to run out of pgt_buf in BRK.
Need to update page_table_range_init() to count the pages for kmap page table
at first, and use new added alloc_low_pages() to get pages in sequence.
That will conform to the requirement that pages need to be in low to high order.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-30-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
32bit kmap mapping needs pages to be used for low to high.
At this point those pages are still from pgt_buf_* from BRK, so it is
ok now.
But we want to move early_ioremap_page_table_range_init() out of
init_memory_mapping() and only call it one time later, that will
make page_table_range_init/page_table_kmap_check/alloc_low_page to
use memblock to get page.
memblock allocation for pages are from high to low.
So will get panic from page_table_kmap_check() that has BUG_ON to do
ordering checking.
This patch add alloc_low_pages to make it possible to allocate serveral
pages at first, and hand out pages one by one from low to high.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-28-git-send-email-yinghai@kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Page table area are pre-mapped now after
x86, mm: setup page table in top-down
x86, mm: Remove early_memremap workaround for page table accessing on 64bit
mapping_pagetable_reserve is not used anymore, so remove it.
Also remove operation in mask_rw_pte(), as modified allow_low_page
always return pages that are already mapped, moreover
xen_alloc_pte_init, xen_alloc_pmd_init, etc, will mark the page RO
before hooking it into the pagetable automatically.
-v2: add changelog about mask_rw_pte() from Stefano.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-27-git-send-email-yinghai@kernel.org
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Get pgt_buf early from BRK, and use it to map PMD_SIZE from top at first.
Then use mapped pages to map more ranges below, and keep looping until
all pages get mapped.
alloc_low_page will use page from BRK at first, after that buffer is used
up, will use memblock to find and reserve pages for page table usage.
Introduce min_pfn_mapped to make sure find new pages from mapped ranges,
that will be updated when lower pages get mapped.
Also add step_size to make sure that don't try to map too big range with
limited mapped pages initially, and increase the step_size when we have
more mapped pages on hand.
We don't need to call pagetable_reserve anymore, reserve work is done
in alloc_low_page() directly.
At last we can get rid of calculation and find early pgt related code.
-v2: update to after fix_xen change,
also use MACRO for initial pgt_buf size and add comments with it.
-v3: skip big reserved range in memblock.reserved near end.
-v4: don't need fix_xen change now.
-v5: add changelog about moving about reserving pagetable to alloc_low_page.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-22-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
After we add code use buffer in BRK to pre-map buf for page table in
following patch:
x86, mm: setup page table in top-down
it should be safe to remove early_memmap for page table accessing.
Instead we get panic with that.
It turns out that we clear the initial page table wrongly for next range
that is separated by holes.
And it only happens when we are trying to map ram range one by one.
We need to check if the range is ram before clearing page table.
We change the loop structure to remove the extra little loop and use
one loop only, and in that loop will caculate next at first, and check if
[addr,next) is covered by E820_RAM.
-v2: E820_RESERVED_KERN is treated as E820_RAM. EFI one change some E820_RAM
to that, so next kernel by kexec will know that range is used already.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-20-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We could map small range in the middle of big range at first, so should use
big page size at first to avoid using small page size to break down page table.
Only can set big page bit when that range has ram area around it.
-v2: fix 32bit boundary checking. We can not count ram above max_low_pfn
for 32 bit.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-19-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We are going to use buffer in BRK to map small range just under memory top,
and use those new mapped ram to map ram range under it.
The ram range that will be mapped at first could be only page aligned,
but ranges around it are ram too, we could use bigger page to map it to
avoid small page size.
We will adjust page_size_mask in following patch:
x86, mm: Use big page size for small memory range
to use big page size for small ram range.
Before that patch, this patch will make sure start address to be
aligned down according to bigger page size, otherwise entry in page
page will not have correct value.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-18-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT )
and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not
backed by actual DRAM. This is fine for holes under 4GB which are covered
by fixed and variable range MTRRs to be UC. However, we run into trouble
on higher memory addresses which cannot be covered by MTRRs.
Our system with 1TB of RAM has an e820 that looks like this:
BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable
BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable
BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data
BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS
BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable
BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved
BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable
and so direct mappings are created for huge memory hole between
0x000000e038000000 to 0x0000010000000000. Even though the kernel never
generates memory accesses in that region, since the page tables mark
them incorrectly as being WB, our (AMD) processor ends up causing a MCE
while doing some memory bookkeeping/optimizations around that area.
This patch iterates through e820 and only direct maps ranges that are
marked as E820_RAM, and keeps track of those pfn ranges. Depending on
the alignment of E820 ranges, this may possibly result in using smaller
size (i.e. 4K instead of 2M or 1G) page tables.
-v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range
instead. - Yinghai Lu
-v3: add calculate_all_table_space_size() to get correct needed page table
size. - Yinghai Lu
-v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when
mem map does have hole under 4g that is found by Konard on xen
domU with 8g ram. - Yinghai
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
After
| commit 8548c84da2
| Author: Takashi Iwai <tiwai@suse.de>
| Date: Sun Oct 23 23:19:12 2011 +0200
|
| x86: Fix S4 regression
|
| Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4
| regression since 2.6.39, namely the machine reboots occasionally at S4
| resume. It doesn't happen always, overall rate is about 1/20. But,
| like other bugs, once when this happens, it continues to happen.
|
| This patch fixes the problem by essentially reverting the memory
| assignment in the older way.
Have some page table around 512M again, that will prevent kdump to find 512M
under 768M.
We need revert that reverting, so we could put page table high again for 64bit.
Takashi agreed that S4 regression could be something else.
https://lkml.org/lkml/2012/6/15/182
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-6-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Now init_memory_mapping is called two times, later will be called for every
ram ranges.
Could put all related init_mem calling together and out of setup.c.
Actually, it reverts commit 1bbbbe7
x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
will address that later with complete solution include handling hole under 4g.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-5-git-send-email-yinghai@kernel.org
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Now we pass around use_gbpages and use_pse for calculating page table size,
Later we will need to call init_memory_mapping for every ram range one by one,
that mean those calculation will be done several times.
Those information are the same for all ram range and could be stored in
page_size_mask and could be probed it one time only.
Move that probing code out of init_memory_mapping into separated function
probe_page_size_mask(), and call it before all init_memory_mapping.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-2-git-send-email-yinghai@kernel.org
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
When I made an attempt at separating __pa_symbol and __pa I found that there
were a number of cases where __pa was used on an obvious symbol.
I also caught one non-obvious case as _brk_start and _brk_end are based on the
address of __brk_base which is a C visible symbol.
In mark_rodata_ro I was able to reduce the overhead of kernel symbol to
virtual memory translation by using a combination of __va(__pa_symbol())
instead of page_address(virt_to_page()).
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215640.8521.80483.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
I submitted an earlier patch that make __phys_addr an inline. This obviously
results in an increase in the code size. One step I can take to reduce that
is to make it so that the __pa_symbol call does a direct translation for
kernel addresses instead of covering all of virtual memory.
On my system this reduced the size for __pa_symbol from 5 instructions
totalling 30 bytes to 3 instructions totalling 16 bytes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215356.8521.92472.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch is meant to improve overall system performance when making use of
the __phys_addr call. To do this I have implemented several changes.
First if CONFIG_DEBUG_VIRTUAL is not defined __phys_addr is made an inline,
similar to how this is currently handled in 32 bit. However in order to do
this it is required to export phys_base so that it is available if __phys_addr
is used in kernel modules.
The second change was to streamline the code by making use of the carry flag
on an add operation instead of performing a compare on a 64 bit value. The
advantage to this is that it allows us to significantly reduce the overall
size of the call. On my Xeon E5 system the entire __phys_addr inline call
consumes a little less than 32 bytes and 5 instructions. I also applied
similar logic to the debug version of the function. My testing shows that the
debug version of the function with this patch applied is slightly faster than
the non-debug version without the patch.
Finally I also applied the same logic changes to __virt_addr_valid since it
used the same general code flow as __phys_addr and could achieve similar gains
though these changes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215315.8521.46270.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
commit 611ae8e3f5204f7480b3b405993b3352cfa16662('enable tlb flush range
support for x86') change flush_tlb_mm_range() considerably. After this,
we test whether vmflag equal to VM_HUGETLB and it may be always failed,
because vmflag usually has other flags simultaneously.
Our intention is to check whether this vma is for hughtlb, so correct it
according to this purpose.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Acked-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1352740656-19417-1-git-send-email-js1304@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.
Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).
Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).
Also make the two EFI functions in question here static -
they're not being referenced elsewhere.
History:
This commit was originally merged as bacef661ac ("x86-64/efi:
Use EFI to deal with platform wall clock") but it resulted in some
ASUS machines no longer booting due to a firmware bug, and so was
reverted in f026cfa82f. A pre-emptive fix for the buggy ASUS
firmware was merged in 03a1c254975e ("x86, efi: 1:1 pagetable
mapping for virtual EFI calls") so now this patch can be
reapplied.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com> [added commit history]
There are various pieces of code in arch/x86 that require a page table
with an identity mapping. Make trampoline_pgd a proper kernel page
table, it currently only includes the kernel text and module space
mapping.
One new feature of trampoline_pgd is that it now has mappings for the
physical I/O device addresses, which are inserted at ioremap()
time. Some broken implementations of EFI firmware require these
mappings to always be around.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
