In generic_load_microcode(), curr_mc_size is the size of the last
allocated buffer and since we have this performance "optimization"
there to vmalloc a new buffer only when the current one is bigger,
curr_mc_size ends up becoming the size of the biggest buffer we've seen
so far.
However, we end up saving the microcode patch which matches our CPU
and its size is not curr_mc_size but the respective mc_size during the
iteration while we're staring at it.
So save that mc_size into a separate variable and use it to store the
previously found microcode buffer.
Without this fix, we could get oops like this:
BUG: unable to handle kernel paging request at ffffc9000e30f000
IP: __memcpy+0x12/0x20
...
Call Trace:
? kmemdup+0x43/0x60
__alloc_microcode_buf+0x44/0x70
save_microcode_patch+0xd4/0x150
generic_load_microcode+0x1b8/0x260
request_microcode_user+0x15/0x20
microcode_write+0x91/0x100
__vfs_write+0x34/0x120
vfs_write+0xc1/0x130
SyS_write+0x56/0xc0
do_syscall_64+0x6c/0x160
entry_SYSCALL64_slow_path+0x25/0x25
Fixes: 06b8534cb7 ("x86/microcode: Rework microcode loading")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/4f33cbfd-44f2-9bed-3b66-7446cd14256f@ce.jp.nec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since on Intel we're required to do CPUID(1) first, before reading
the microcode revision MSR, let's add a special helper which does the
required steps so that we don't forget to do them next time, when we
want to read the microcode revision.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170109114147.5082-4-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Intel supplies the microcode revision value in MSR 0x8b
(IA32_BIOS_SIGN_ID) after CPUID(1) has been executed. Execute it each
time before reading that MSR.
It used to do sync_core() which did do CPUID but
c198b121b1 ("x86/asm: Rewrite sync_core() to use IRET-to-self")
changed the sync_core() implementation so we better make the microcode
loading case explicit, as the SDM documents it.
Reported-and-tested-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170109114147.5082-3-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When we switch to virtual addresses and, especially after
reserve_initrd()->relocate_initrd() have run, we have the updated initrd
address in initrd_start. Use initrd_start then instead of the address
which has been passed to us through boot params. (That still gets used
when we're running the very early routines on the BSP).
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20161220144012.lc4cwrg6dphqbyqu@pd.tnic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Doing so is completely void of sense for multiple reasons so prevent
it. Set dis_ucode_ldr to true and thus disable the microcode loader by
default to address xen pv guests which execute the AP path but not the
BSP path.
By having it turned off by default, the APs won't run into the loader
either.
Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the
xen pv one. That one gets the aforementioned "fix".
Also, improve the detection method by caching the final decision whether
to continue loading in dis_ucode_ldr and do it once on the BSP. The APs
then simply test that value.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/20161218164414.9649-4-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Yeah, I know, I know, this is a huuge patch and reviewing it is hard.
Sorry but this is the only way I could think of in which I can rewrite
the microcode patches loading procedure without breaking (knowingly) the
driver.
So maybe this patch is easier to review if one looks at the files after
the patch has been applied instead at the diff. Because then it becomes
pretty obvious:
* The BSP-loading path - load_ucode_bsp() is working independently from
the AP path now and it doesn't save any pointers or patches anymore -
it solely parses the builtin or initrd microcode and applies the patch.
That's it.
This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly.
* The AP-loading path - load_ucode_ap() then goes and scans
builtin/initrd *again* for the microcode patches but it caches them this
time so that we don't have to do that scan on each AP but only once.
This simplifies the code considerably.
Then, when we save the microcode from the initrd/builtin, we go and
add the relevant patches to our own cache. The AMD side did do that
and now the Intel side does it too. So no more pointer copying and
blabla, we save the microcode patches ourselves and are independent from
initrd/builtin.
This whole conversion gives us other benefits like unifying the
initrd parsing into a single function: find_microcode_in_initrd() is
used by both.
The diffstat speaks for itself: 456 insertions(+), 695 deletions(-)
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull CPU hotplug updates from Thomas Gleixner:
"Yet another batch of cpu hotplug core updates and conversions:
- Provide core infrastructure for multi instance drivers so the
drivers do not have to keep custom lists.
- Convert custom lists to the new infrastructure. The block-mq custom
list conversion comes through the block tree and makes the diffstat
tip over to more lines removed than added.
- Handle unbalanced hotplug enable/disable calls more gracefully.
- Remove the obsolete CPU_STARTING/DYING notifier support.
- Convert another batch of notifier users.
The relayfs changes which conflicted with the conversion have been
shipped to me by Andrew.
The remaining lot is targeted for 4.10 so that we finally can remove
the rest of the notifiers"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
cpufreq: Fix up conversion to hotplug state machine
blk/mq: Reserve hotplug states for block multiqueue
x86/apic/uv: Convert to hotplug state machine
s390/mm/pfault: Convert to hotplug state machine
mips/loongson/smp: Convert to hotplug state machine
mips/octeon/smp: Convert to hotplug state machine
fault-injection/cpu: Convert to hotplug state machine
padata: Convert to hotplug state machine
cpufreq: Convert to hotplug state machine
ACPI/processor: Convert to hotplug state machine
virtio scsi: Convert to hotplug state machine
oprofile/timer: Convert to hotplug state machine
block/softirq: Convert to hotplug state machine
lib/irq_poll: Convert to hotplug state machine
x86/microcode: Convert to hotplug state machine
sh/SH-X3 SMP: Convert to hotplug state machine
ia64/mca: Convert to hotplug state machine
ARM/OMAP/wakeupgen: Convert to hotplug state machine
ARM/shmobile: Convert to hotplug state machine
arm64/FP/SIMD: Convert to hotplug state machine
...
CONFIG_RANDOMIZE_MEMORY=y randomizes the physical memmap and thus the
address where the initrd is located. Therefore, we need to add the
offset KASLR put us to in order to find the initrd again on the AP path.
In the future, we will get rid of the initrd address caching and query
the address on both the BSP and AP paths but that would need more work.
Thanks to Nicolai Stange for the good bisection and debugging work.
Reported-and-tested-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160726095138.3470-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Usually, after we have found the proper microcode blob for the current
machine, we stash it away for later use with save_microcode_in_initrd().
However, with builtin microcode which doesn't come from the initrd, we
don't call that function because CONFIG_BLK_DEV_INITRD=n and even if
set, we don't have a valid initrd.
In order to fix this, let's make save_microcode_in_initrd() an
fs_initcall which runs before rootfs_initcall() as this was the time it
was called previously through:
rootfs_initcall(populate_rootfs)
|-> free_initrd()
|-> free_initrd_mem()
|-> save_microcode_in_initrd()
Also, we make it run independently from initrd functionality being
present or not.
And since it is called in the microcode loader only now, we can also
make it static.
Reported-and-tested-by: Jim Bos <jim876@xs4all.nl>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # v4.6
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1465225850-7352-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So it can happen that even with builtin microcode,
CONFIG_BLK_DEV_INITRD=y gets forgotten enabled.
Or, even with that disabled, an initrd image gets supplied by the boot
loader, by omission or is simply forgotten there. And since we do look
at boot_params.hdr.ramdisk_* to know whether we have received an initrd,
we might get puzzled.
So let's just make the loader look for builtin microcode first and if
found, ignore the ramdisk image.
If no builtin found, it falls back to scanning the supplied initrd, of
course.
For that, we move all the initrd scanning in a separate
__scan_microcode_initrd() function and fall back to it only if
load_builtin_intel_microcode() has failed.
Reported-and-tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1465225850-7352-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fix spelling typos found in printk
within various part of the kernel sources.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull x86 microcode updates from Ingo Molnar:
"The biggest change in this cycle was the separation of the microcode
loading mechanism from the initrd code plus the support of built-in
microcode images.
There were also lots cleanups and general restructuring (by Borislav
Petkov)"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/microcode/intel: Drop orig_sum from ext signature checksum
x86/microcode/intel: Improve microcode sanity-checking error messages
x86/microcode/intel: Merge two consecutive if-statements
x86/microcode/intel: Get rid of DWSIZE
x86/microcode/intel: Change checksum variables to u32
x86/microcode: Use kmemdup() rather than duplicating its implementation
x86/microcode: Remove unnecessary paravirt_enabled check
x86/microcode: Document builtin microcode loading method
x86/microcode/AMD: Issue microcode updated message later
x86/microcode/intel: Cleanup get_matching_model_microcode()
x86/microcode/intel: Remove unused arg of get_matching_model_microcode()
x86/microcode/intel: Rename mc_saved_in_initrd
x86/microcode/intel: Use *wrmsrl variants
x86/microcode/intel: Cleanup apply_microcode_intel()
x86/microcode/intel: Move the BUG_ON up and turn it into WARN_ON
x86/microcode/intel: Rename mc_intel variable to mc
x86/microcode/intel: Rename mc_saved_count to num_saved
x86/microcode/intel: Rename local variables of type struct mc_saved_data
x86/microcode/AMD: Drop redundant printk prefix
x86/microcode: Issue update message only once
...
Microcode checksum verification should be done using unsigned 32-bit
values otherwise the calculation overflow results in undefined
behaviour.
This is also nicely documented in the SDM, section "Microcode Update
Checksum":
"To check for a corrupt microcode update, software must perform a
unsigned DWORD (32-bit) checksum of the microcode update. Even though
some fields are signed, the checksum procedure treats all DWORDs as
unsigned. Microcode updates with a header version equal to 00000001H
must sum all DWORDs that comprise the microcode update. A valid
checksum check will yield a value of 00000000H."
but for some reason the code has been using ints from the very
beginning.
In practice, this bug possibly manifested itself only when doing the
microcode data checksum - apparently, currently shipped Intel microcode
doesn't have an extended signature table for which we do checksum
verification too.
UBSAN: Undefined behaviour in arch/x86/kernel/cpu/microcode/intel_lib.c:105:12
signed integer overflow:
-1500151068 + -2125470173 cannot be represented in type 'int'
CPU: 0 PID: 0 Comm: swapper Not tainted 4.5.0-rc5+ #495
...
Call Trace:
dump_stack
? inotify_ioctl
ubsan_epilogue
handle_overflow
__ubsan_handle_add_overflow
microcode_sanity_check
get_matching_model_microcode.isra.2.constprop.8
? early_idt_handler_common
? strlcpy
? find_cpio_data
load_ucode_intel_bsp
load_ucode_bsp
? load_ucode_bsp
x86_64_start_kernel
[ Expand and massage commit message. ]
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: hmh@hmh.eng.br
Link: http://lkml.kernel.org/r/1456834359-5132-1-git-send-email-chris.bainbridge@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename it to mc_tmp_ptrs to denote better what it is - a temporary array
for saving pointers to microcode blobs. And "initrd" is not accurate
anymore since initrd is not the only source for early microcode.
Therefore, rename copy_initrd_ptrs() to copy_ptrs() simply and
"initrd_start" to "offset".
And then do the following convention: the global variable is called
"mc_tmp_ptrs" and the local function arguments "mc_ptrs" for
differentiation.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-14-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
