. avoid walking the stack when there is no room left in the buffer
. generalize get_perf_callchain() to be called from bpf helper
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull livepatching fixes from Jiri Kosina:
- regression (from 4.4) fix for ordering issue, introduced by an
earlier ftrace change, that broke live patching of modules.
The fix replaces the ftrace module notifier by direct call in order
to make the ordering guaranteed and well-defined. The patch, from
Jessica Yu, has been acked both by Steven and Rusty
- error message fix from Miroslav Benes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
ftrace/module: remove ftrace module notifier
livepatch: change the error message in asm/livepatch.h header files
Protection keys provide new page-based protection in hardware.
But, they have an interesting attribute: they only affect data
accesses and never affect instruction fetches. That means that
if we set up some memory which is set as "access-disabled" via
protection keys, we can still execute from it.
This patch uses protection keys to set up mappings to do just that.
If a user calls:
mmap(..., PROT_EXEC);
or
mprotect(ptr, sz, PROT_EXEC);
(note PROT_EXEC-only without PROT_READ/WRITE), the kernel will
notice this, and set a special protection key on the memory. It
also sets the appropriate bits in the Protection Keys User Rights
(PKRU) register so that the memory becomes unreadable and
unwritable.
I haven't found any userspace that does this today. With this
facility in place, we expect userspace to move to use it
eventually. Userspace _could_ start doing this today. Any
PROT_EXEC calls get converted to PROT_READ inside the kernel, and
would transparently be upgraded to "true" PROT_EXEC with this
code. IOW, userspace never has to do any PROT_EXEC runtime
detection.
This feature provides enhanced protection against leaking
executable memory contents. This helps thwart attacks which are
attempting to find ROP gadgets on the fly.
But, the security provided by this approach is not comprehensive.
The PKRU register which controls access permissions is a normal
user register writable from unprivileged userspace. An attacker
who can execute the 'wrpkru' instruction can easily disable the
protection provided by this feature.
The protection key that is used for execute-only support is
permanently dedicated at compile time. This is fine for now
because there is currently no API to set a protection key other
than this one.
Despite there being a constant PKRU value across the entire
system, we do not set it unless this feature is in use in a
process. That is to preserve the PKRU XSAVE 'init state',
which can lead to faster context switches.
PKRU *is* a user register and the kernel is modifying it. That
means that code doing:
pkru = rdpkru()
pkru |= 0x100;
mmap(..., PROT_EXEC);
wrpkru(pkru);
could lose the bits in PKRU that enforce execute-only
permissions. To avoid this, we suggest avoiding ever calling
mmap() or mprotect() when the PKRU value is expected to be
unstable.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Piotr Kwapulinski <kwapulinski.piotr@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: keescook@google.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210240.CB4BB5CA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Protection Key Rights for User memory (PKRU) is a 32-bit
user-accessible register. It contains two bits for each
protection key: one to write-disable (WD) access to memory
covered by the key and another to access-disable (AD).
Userspace can read/write the register with the RDPKRU and WRPKRU
instructions. But, the register is saved and restored with the
XSAVE family of instructions, which means we have to treat it
like a floating point register.
The kernel needs to write to the register if it wants to
implement execute-only memory or if it implements a system call
to change PKRU.
To do this, we need to create a 'pkru_state' buffer, read the old
contents in to it, modify it, and then tell the FPU code that
there is modified data in there so it can (possibly) move the
buffer back in to the registers.
This uses the fpu__xfeature_set_state() function that we defined
in the previous patch.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210236.0BE13217@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As discussed earlier, we attempt to enforce protection keys in
software.
However, the code checks all faults to ensure that they are not
violating protection key permissions. It was assumed that all
faults are either write faults where we check PKRU[key].WD (write
disable) or read faults where we check the AD (access disable)
bit.
But, there is a third category of faults for protection keys:
instruction faults. Instruction faults never run afoul of
protection keys because they do not affect instruction fetches.
So, plumb the PF_INSTR bit down in to the
arch_vma_access_permitted() function where we do the protection
key checks.
We also add a new FAULT_FLAG_INSTRUCTION. This is because
handle_mm_fault() is not passed the architecture-specific
error_code where we keep PF_INSTR, so we need to encode the
instruction fetch information in to the arch-generic fault
flags.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210224.96928009@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fills in the new siginfo field: si_pkey to indicate to
userspace which protection key was set on the PTE that we faulted
on.
Note though that *ALL* protection key faults have to be generated
by a valid, present PTE at some point. But this code does no PTE
lookups which seeds odd. The reason is that we take advantage of
the way we generate PTEs from VMAs. All PTEs under a VMA share
some attributes. For instance, they are _all_ either PROT_READ
*OR* PROT_NONE. They also always share a protection key, so we
never have to walk the page tables; we just use the VMA.
Note that _pkey is a 64-bit value. The current hardware only
supports 4-bit protection keys. We do this because there is
_plenty_ of space in _sigfault and it is possible that future
processors would support more than 4 bits of protection keys.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210213.ABC488FA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lots of things seem to do:
vma->vm_page_prot = vm_get_page_prot(flags);
and the ptes get created right from things we pull out
of ->vm_page_prot. So it is very convenient if we can
store the protection key in flags and vm_page_prot, just
like the existing permission bits (_PAGE_RW/PRESENT). It
greatly reduces the amount of plumbing and arch-specific
hacking we have to do in generic code.
This also takes the new PROT_PKEY{0,1,2,3} flags and
turns *those* in to VM_ flags for vma->vm_flags.
The protection key values are stored in 4 places:
1. "prot" argument to system calls
2. vma->vm_flags, filled from the mmap "prot"
3. vma->vm_page prot, filled from vma->vm_flags
4. the PTE itself.
The pseudocode for these for steps are as follows:
mmap(PROT_PKEY*)
vma->vm_flags = ... | arch_calc_vm_prot_bits(mmap_prot);
vma->vm_page_prot = ... | arch_vm_get_page_prot(vma->vm_flags);
pte = pfn | vma->vm_page_prot
Note that this provides a new definitions for x86:
arch_vm_get_page_prot()
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210210.FE483A42@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Intel Software Developer Manual describes bit 24 in the MCG_CAP
MSR:
MCG_SER_P (software error recovery support present) flag,
bit 24 — Indicates (when set) that the processor supports
software error recovery
But only some models with this capability bit set will actually
generate recoverable machine checks.
Check the model name and set a synthetic capability bit. Provide
a command line option to set this bit anyway in case the kernel
doesn't recognise the model name.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2e5bfb23c89800a036fb8a45fa97a74bb16bc362.1455732970.git.tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Huge amounts of help from Andy Lutomirski and Borislav Petkov to
produce this. Andy provided the inspiration to add classes to the
exception table with a clever bit-squeezing trick, Boris pointed
out how much cleaner it would all be if we just had a new field.
Linus Torvalds blessed the expansion with:
' I'd rather not be clever in order to save just a tiny amount of space
in the exception table, which isn't really criticial for anybody. '
The third field is another relative function pointer, this one to a
handler that executes the actions.
We start out with three handlers:
1: Legacy - just jumps the to fixup IP
2: Fault - provide the trap number in %ax to the fixup code
3: Cleaned up legacy for the uaccess error hack
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f6af78fcbd348cf4939875cfda9c19689b5e50b8.1455732970.git.tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a second attempt to make the improvements from c6f2062935
("x86/signal/64: Fix SS handling for signals delivered to 64-bit
programs"), which was reverted by 51adbfbba5c6 ("x86/signal/64: Add
support for SS in the 64-bit signal context").
This adds two new uc_flags flags. UC_SIGCONTEXT_SS will be set for
all 64-bit signals (including x32). It indicates that the saved SS
field is valid and that the kernel supports the new behavior.
The goal is to fix a problems with signal handling in 64-bit tasks:
SS wasn't saved in the 64-bit signal context, making it awkward to
determine what SS was at the time of signal delivery and making it
impossible to return to a non-flat SS (as calling sigreturn clobbers
SS).
This also made it extremely difficult for 64-bit tasks to return to
fully-defined 16-bit contexts, because only the kernel can easily do
espfix64, but sigreturn was unable to set a non-flag SS:ESP.
(DOSEMU has a monstrous hack to partially work around this
limitation.)
If we could go back in time, the correct fix would be to make 64-bit
signals work just like 32-bit signals with respect to SS: save it
in signal context, reset it when delivering a signal, and restore
it in sigreturn.
Unfortunately, doing that (as I tried originally) breaks DOSEMU:
DOSEMU wouldn't reset the signal context's SS when clearing the LDT
and changing the saved CS to 64-bit mode, since it predates the SS
context field existing in the first place.
This patch is a bit more complicated, and it tries to balance a
bunch of goals. It makes most cases of changing ucontext->ss during
signal handling work as expected.
I do this by special-casing the interesting case. On sigreturn,
ucontext->ss will be honored by default, unless the ucontext was
created from scratch by an old program and had a 64-bit CS
(unfortunately, CRIU can do this) or was the result of changing a
32-bit signal context to 64-bit without resetting SS (as DOSEMU
does).
For the benefit of new 64-bit software that uses segmentation (new
versions of DOSEMU might), the new behavior can be detected with a
new ucontext flag UC_SIGCONTEXT_SS.
To avoid compilation issues, __pad0 is left as an alias for ss in
ucontext.
The nitty-gritty details are documented in the header file.
This patch also re-enables the sigreturn_64 and ldt_gdt_64 selftests,
as the kernel change allows both of them to pass.
Tested-by: Stas Sergeev <stsp@list.ru>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/749149cbfc3e75cd7fcdad69a854b399d792cc6f.1455664054.git.luto@kernel.org
[ Small readability edit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signals are always delivered to 64-bit tasks with CS set to a long
mode segment. In long mode, SS doesn't matter as long as it's a
present writable segment.
If SS starts out invalid (this can happen if the signal was caused
by an IRET fault or was delivered on the way out of set_thread_area
or modify_ldt), then IRET to the signal handler can fail, eventually
killing the task.
The straightforward fix would be to simply reset SS when delivering
a signal. That breaks DOSEMU, though: 64-bit builds of DOSEMU rely
on SS being set to the faulting SS when signals are delivered.
As a compromise, this patch leaves SS alone so long as it's valid.
The net effect should be that the behavior of successfully delivered
signals is unchanged. Some signals that would previously have
failed to be delivered will now be delivered successfully.
This has no effect for x32 or 32-bit tasks: their signal handlers
were already called with SS == __USER_DS.
(On Xen, there's a slight hole: if a task sets SS to a writable
*kernel* data segment, then we will fail to identify it as invalid
and we'll still kill the task. If anyone cares, this could be fixed
with a new paravirt hook.)
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/163c6e1eacde41388f3ff4d2fe6769be651d7b6e.1455664054.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add an fwnode_handle to the x86 struct pci_sysdata, which will be used to
locate an IRQ domain associated with a root PCI bus.
[bhelgaas: changelog]
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
There are two CPUID bits for protection keys. One is for whether
the CPU contains the feature, and the other will appear set once
the OS enables protection keys. Specifically:
Bit 04: OSPKE. If 1, OS has set CR4.PKE to enable
Protection keys (and the RDPKRU/WRPKRU instructions)
This is because userspace can not see CR4 contents, but it can
see CPUID contents.
X86_FEATURE_PKU is referred to as "PKU" in the hardware documentation:
CPUID.(EAX=07H,ECX=0H):ECX.PKU [bit 3]
X86_FEATURE_OSPKE is "OSPKU":
CPUID.(EAX=07H,ECX=0H):ECX.OSPKE [bit 4]
These are the first CPU features which need to look at the
ECX word in CPUID leaf 0x7, so this patch also includes
fetching that word in to the cpuinfo->x86_capability[] array.
Add it to the disabled-features mask when its config option is
off. Even though we are not using it here, we also extend the
REQUIRED_MASK_BIT_SET() macro to keep it mirroring the
DISABLED_MASK_BIT_SET() version.
This means that in almost all code, you should use:
cpu_has(c, X86_FEATURE_PKU)
and *not* the CONFIG option.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210201.7714C250@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is an XSAVE state component for Intel Processor Trace (PT).
But, we do not currently use it.
We add a placeholder in the code for it so it is not a mystery and
also so we do not need an explicit enum initialization for Protection
Keys in a moment.
Why don't we use it?
We might end up using this at _some_ point in the future. But,
this is a "system" state which requires using the currently
unsupported XSAVES feature. Unlike all the other XSAVE states,
PT state is also not directly tied to a thread. You might
context-switch between threads, but not want to change any of the
PT state. Or, you might switch between threads, and *do* want to
change PT state, all depending on what is being traced.
We currently just manually set some MSRs to do this PT context
switching, and it is unclear whether replacing our direct MSR use
with XSAVE will be a net win or loss, both in code complexity and
performance.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: fenghua.yu@intel.com
Cc: linux-mm@kvack.org
Cc: yu-cheng.yu@intel.com
Link: http://lkml.kernel.org/r/20160212210158.5E4BCAE2@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When GCC cannot do constant folding for this macro, it falls back to
cpu_has(). But static_cpu_has() is optimal and it works at all times
now. So use it and speedup the fallback case.
Before we had this:
mov 0x99d674(%rip),%rdx # ffffffff81b0d9f4 <boot_cpu_data+0x34>
shr $0x2e,%rdx
and $0x1,%edx
jne ffffffff811704e9 <do_munmap+0x3f9>
After alternatives patching, it turns into:
jmp 0xffffffff81170390
nopl (%rax)
...
callq ffffffff81056e00 <mpx_notify_unmap>
ffffffff81170390: mov 0x170(%r12),%rdi
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1455578358-28347-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
asm/gpio.h is included only by linux/gpio.h, and then only when the arch
selects ARCH_HAVE_CUSTOM_GPIO_H. Only the following arches select it: arm
avr32 blackfin m68k (COLDFIRE only) sh unicore32.
Remove the unused asm/gpio.h files for the arches that do not select
ARCH_HAVE_CUSTOM_GPIO_H.
This is a follow-on to 7563bbf89d ("gpiolib/arches: Centralise
bolierplate asm/gpio.h").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The messages should be different depending on the type of error.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
DMI cacheability is very confused on x86.
dmi_early_remap() uses early_ioremap(), which uses FIXMAP_PAGE_IO,
which is __PAGE_KERNEL_IO, which is __PAGE_KERNEL, which is cached.
Don't ask me why this makes any sense.
dmi_remap() uses ioremap(), which requests an uncached mapping.
However, on non-EFI systems, the DMI data generally lives between
0xf0000 and 0x100000, which is in the legacy ISA range, which
triggers a special case in the PAT code that overrides the cache
mode requested by ioremap() and forces a WB mapping.
On a UEFI boot, however, the DMI table can live at any physical
address. On my laptop, it's around 0x77dd0000. That's nowhere near
the legacy ISA range, so the ioremap() implicit uncached type is
honored and we end up with a UC- mapping.
UC- is a very, very slow way to read from main memory, so dmi_walk()
is likely to take much longer than necessary.
Given that, even on UEFI, we do early cached DMI reads, it seems
safe to just ask for cached access. Switch to ioremap_cache().
I haven't tried to benchmark this, but I'd guess it saves several
milliseconds of boot time.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/3147c38e51f439f3c8911db34c7d4ab22d854915.1453791969.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use vector-hashing to deliver lowest-priority interrupts, As an
example, modern Intel CPUs in server platform use this method to
handle lowest-priority interrupts.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
thread_saved_pc() reads stack of a potentially running task.
This can cause false KASAN stack-out-of-bounds reports,
because the running task concurrently poisons and unpoisons
own stack.
The same happens in get_wchan(), and get get_wchan() was fixed
by using READ_ONCE_NOCHECK(). Do the same here.
Example KASAN report triggered by sysrq-t:
BUG: KASAN: out-of-bounds in sched_show_task+0x306/0x3b0 at addr ffff880043c97c18
Read of size 8 by task syz-executor/23839
[...]
page dumped because: kasan: bad access detected
[...]
Call Trace:
[<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40
[<ffffffff813e7a26>] sched_show_task+0x306/0x3b0
[<ffffffff813e7bf4>] show_state_filter+0x124/0x1a0
[<ffffffff82d2ca00>] fn_show_state+0x10/0x20
[<ffffffff82d2cf98>] k_spec+0xa8/0xe0
[<ffffffff82d3354f>] kbd_event+0xb9f/0x4000
[<ffffffff843ca8a7>] input_to_handler+0x3a7/0x4b0
[<ffffffff843d1954>] input_pass_values.part.5+0x554/0x6b0
[<ffffffff843d29bc>] input_handle_event+0x2ac/0x1070
[<ffffffff843d3a47>] input_inject_event+0x237/0x280
[<ffffffff843e8c28>] evdev_write+0x478/0x680
[<ffffffff817ac653>] __vfs_write+0x113/0x480
[<ffffffff817ae0e7>] vfs_write+0x167/0x4a0
[<ffffffff817b13d1>] SyS_write+0x111/0x220
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: glider@google.com
Cc: kasan-dev@googlegroups.com
Cc: kcc@google.com
Cc: linux-kernel@vger.kernel.org
Cc: ryabinin.a.a@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
