Move the initialisation of the CP0.Wired register implemented by Toshiba
TX3922 and TX3927 processors from `tx39_cache_init' to `tlb_init' where
it belongs, correcting code structure and making sure initialisation
does not rely on `tx39_cache_init' being called before `tlb_init' to
work correctly.
Make `r3k_have_wired_reg' static as it's no longer externally referred
to; remove a stale declaration too.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10195/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Most R3k processor implementations have their 8 first TLB entries fixed
as wired, so we always skip them in TLB invalidation. That however
means any leftover entries present there at boot will stay throughout
the life of the kernel, unless replaced with new ones.
So rename `local_flush_tlb_all' to `local_flush_tlb_from' and make it
accept the TLB entry to start from. Then use 0 initially at bootstrap,
and the first regular entry later on, bypassing any wired entries.
Wrap the latter arrangement into a new `local_flush_tlb_all' entry
point.
There is no need to disable interrupts in the call made from `tlb_init'
because it's made before the interrupt subsystem has been initialised;
this is also true for secondary processors, should we ever support R3k
SMP. So move this piece of code to new `local_flush_tlb_all'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10194/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
XPA extends the physical addresses on MIPS32, including the EntryLo
registers. Update dump_tlb() to concatenate the PFNX field from the high
end of the EntryLo registers (as read by mfhc0).
The width of physical and virtual addresses are also separated to show
only 8 nibbles of virtual but 11 nibbles of physical with XPA.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10077/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The RI/XI bits when present are above the PFN field in the EntryLo
registers, at bits 63,62 when read with dmfc0, and bits 31,30 when read
with mfc0. This makes them appear as part of the physical address, since
the other bits are masked with PAGE_MASK, for example:
Index: 253 pgmask=16kb va=77b18000 asid=75
[pa=1000744000 c=5 d=1 v=1 g=0] [pa=100134c000 c=5 d=1 v=1 g=0]
The physical addresses have bit 36 set, which corresponds to bit 30 of
EntryLo1, the XI bit.
Explicitly mask off the RI and XI bits from the printed physical
address, and print the RI and XI bits separately if they exist, giving
output more like this:
Index: 226 pgmask=16kb va=77be0000 asid=79
[ri=0 xi=1 pa=01288000 c=5 d=1 v=1 g=0] [ri=0 xi=0 pa=010e4000 c=5 d=0 v=1 g=0]
Cc: linux-mips@linux-mips.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/10080/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The EHINV bit in EntryHi allows a TLB entry to be properly marked
invalid so that EntryHi doesn't have to be set to a unique value to
avoid machine check exceptions due to multiple matching entries.
Unfortunately dump_tlb() doesn't take this into account so it will print
all the uninteresting invalid TLB entries if the current ASID happens to
be 00. Therefore add a condition to skip entries which are marked
invalid with the EHINV bit.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10076/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The TLB only matches the ASID when the global bit isn't set, so
dump_tlb() shouldn't really be skipping global entries just because the
ASID doesn't match. Fix the condition to read the TLB entry's global bit
from EntryLo0. Note that after a TLB read the global bits in both
EntryLo registers reflect the same global bit in the TLB entry.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10079/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Refactor the TLB matching code in dump_tlb() slightly so that the
conditions which can cause a TLB entry to be skipped can be more easily
extended. This should prevent the match condition getting unwieldy once
it is updated to take further conditions into account.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10081/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use the new tlb read hazard macros from <asm/hazards.h> rather than the
local BARRIER() macro which uses 7 ops regardless of the kernel
configuration.
We use mtc0_tlbr_hazard for the hazard between mtc0 to the index
register and the tlbr, and tlb_read_hazard for the hazard between the
tlbr and the mfc0 of the TLB registers written by tlbr.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10074/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add hazard macros to <asm/hazards.h> for the following hazards around
tlbr (TLB read) instructions, which are used in TLB dumping code and
some KVM TLB management code:
- mtc0_tlbr_hazard
Between mtc0 (Index) and tlbr. This is copied from mtc0_tlbw_hazard in
all cases on the assumption that tlbr always has similar data user
timings to tlbw.
- tlb_read_hazard
Between tlbr and mfc0 (various TLB registers). This is copied from
tlbw_use_hazard in all cases on the assumption that tlbr has similar
data writer characteristics to tlbw, and mfc0 has similar data user
characteristics to loads and stores.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10078/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Extra bcma buses may be totally different models, see following dump:
boardtype=0x0646
pci/1/1/boardtype=0x0545
pci/2/1/boardtype=0x62b
We need to detect them properly to allow drivers apply some board
specific hacks.
[ralf@linux-mips.org: folded in Rafal's fix.]
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/10028/
Patchwork: https://patchwork.linux-mips.org/patch/10048/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
For years we planned to get rid of old u16 fields, let's start doing it
with MIPS code. This process will take some time, it requires doing the
same in ssb/bcma and then switching all drivers to new fields. This will
be handled in separated patches submitted to appropriate trees.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/10026/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
All the necessary support code is already there so all that's left is
to enable the feature in kconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5f38 ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.
Due to the slightly odd way that new threads and processes start execution
when scheduled for the very first time they were bypassing the required
disable_msa call.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If CONFIG_SERIAL_8250 is set to m, the Loongson seria.ko module might get
unloaded while the serial driver modules are still loaded resulting in
stale references to the destroyed platform_device instance.
Anyway, platform devices should always be registered indicated what
devices are present, _not_ what drivers have been configured.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Patchwork: https://patchwork.linux-mips.org/patch/10538/
If CONFIG_MTD_PHYSMAP is set to m, the Cobalt mtd.ko module might get
unloaded while the drivers/mtd modules are still loaded resulting in
stale references to the destroyed platform_device instance.
Anyway, platform devices should always be registered indicated what
devices are present, _not_ what drivers have been configured.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit be0c37c985 ("MIPS: Rearrange PTE bits into fixed positions.")
rearranged the PTE bits into fixed positions in preparation for the XPA
support. However, this patch broke R6 since it only took R2 cores
into consideration for the RI/XI bits leading to boot failures. We fix
this by adding the missing CONFIG_CPU_MIPSR6 definitions
Fixes: be0c37c985 ("MIPS: Rearrange PTE bits into fixed positions.")
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10208/
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
pci_dma_burst_advice() was added by e24c2d963a ("[PATCH] PCI: DMA
bursting advice") but apparently never used. Remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <monstr@monstr.eu> # microblaze
CC: David S. Miller <davem@davemloft.net>
In include/linux/pci.h, we already #include <asm/pci.h>, so we don't need
to include <asm/pci.h> directly.
Remove the unnecessary includes. All the files here already include
<linux/pci.h>.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au> # sh
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Fix stack pointer offset which could potentially corrupt
argument registers in the previous frame. The calculated offset
reflects the size of all the registers we need to preserve so there
is no need for this erroneous subtraction.
[ralf@linux-mips.org: Fixed conflict due to only applying this fix part
of the entire series as part of 4.1 fixes.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation to allow users to enable DeviceTree without arch or
machine selecting it, we need to fix build errors on MIPS. When
CONFIG_OF is enabled, device_tree_init cannot be resolved. This is
trivially fixed by using CONFIG_USE_OF instead of CONFIG_OF for prom.h.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Grant Likely <grant.likely@lianro.org>
Cc: linux-mips@linux-mips.org
Use the default FCSR value in mask probing, avoiding an FPE exception
where reset has left any exception enable and their corresponding cause
bits set and the register is then rewritten with these bits active.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Due to a typo the illegal access interrupt is never cleared in by
the interupt handler, causing an effective deadlock on the first
illegal access.
This was broken since the code was introduced in 5433acd81e ("MIPS:
ralink: add illegal access driver"), but only exposed when the Kconfig
symbol was added, thus enabling the code.
Cc: <stable@vger.kernel.org> [3.18+]
Fixes: a7b7aad383 ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10172/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user()
return value in case of overlong strings.] causing assembler warnings
and broken code generated in __strnlen_kernel_nocheck_asm:
arch/mips/lib/strnlen_user.S: Assembler messages:
arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot
with the CPU_DADDI_WORKAROUNDS option set, resulting in the function
looping indefinitely upon mounting NFS root.
Use conditional assembly to avoid a microMIPS code size regression.
Using $at unconditionally would cause such a regression as there are no
16-bit instruction encodings available for ALU operations using this
register. Using $v1 unconditionally would produce short microMIPS
encodings, but would prevent this register from being used across calls
to this function.
The extra LI operation introduced is free, replacing a NOP originally
scheduled into the delay slot of the branch that follows.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This lets the function access the new memory slot without going through
kvm_memslots and id_to_memslot. It will simplify the code when more
than one address space will be supported.
Unfortunately, the "const"ness of the new argument must be casted
away in two places. Fixing KVM to accept const struct kvm_memory_slot
pointers would require modifications in pretty much all architectures,
and is left for later.
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the generic mechanism to declare a bitmap instead of unsigned long.
This could fix an overwrite defect of whatever follows irq_map.
Not all "#define NR_IRQS <value>" are a multiple of BITS_PER_LONG so
using DECLARE_BITMAP allocates the proper number of longs required
for the possible bits.
For instance:
arch/mips/include/asm/mach-ath79/irq.h:#define NR_IRQS 51
arch/mips/include/asm/mach-db1x00/irq.h:#define NR_IRQS 152
arch/mips/include/asm/mach-lantiq/falcon/irq.h:#define NR_IRQS 328
Signed-off-by: Joe Perches <joe@perches.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10091/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Architecture-specific helpers are not supposed to muck with
struct kvm_userspace_memory_region contents. Add const to
enforce this.
In order to eliminate the only write in __kvm_set_memory_region,
the cleaning of deleted slots is pulled up from update_memslots
to __kvm_set_memory_region.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
