[Why]
To prepare for clock debug logging. With the exception of removing
max_supported_dppclk_khz from logs, there are no functional changes.
[How]
Add clk_bypass struct and clean up buffer logic
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Su Chung <Su.Chung@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dce100 was set to always pass safe_to_lower = false
to the clock manager
Thus, on suspend the clocks were not being set to 0
which is incorrect behaviour
This was causing s3 resume to blackscreen on intel
CPUs with dce100 GPUs attached
(Note that the hash in this Fixes: tag is the hash on Alex's tree)
Fixes: ae7d8aeb38d7 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead")
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When running igt@kms_plane@pixel-format-pipe-* tests the CRC read will
time out and the test will fail.
This is because the CRTC is duplicated but the crc_enabled parameter
isn't copied over to the new dm_crtc_state. CRC reads will time out
because amdgpu_dm_crtc_handle_crc_irq will no longer call
drm_crtc_add_crc_entry.
[How]
Copy crc_enabled when duplicating the state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
add customizable log with a message input, which is for adding
test log in debugging as printf function in ETW.
[Usage]
EVENT_LOG_CUST_MSG1("TestLog","Hello World %d=0x%x", 123, pDC);
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] fbc is within the data path from memory to dce. while
re-configure mc dmif, fbc should be enabled. otherwise, fbc
may not be enabled properly.
[HOW] before re-configure mc dmif, disable fbc, only after
dmif re-configuration fully done, enable fbc again.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are a lot of unintuitive parts of the dm-dc interface.
It would help us if these were documented to provide
a common understanding of what they are supposed to do
[How]
Most of this documentation is stubs, to be filled out more
thoroughly by the experts
Not every dm-accessible function and struct is mentioned.
Simple functions like getters, setters, retain, release,
create, destroy can be left unadorned.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When there are multiple aux transaction in parallel, it is sometime
sporadically the aux transaction starts to continuously fail. The
aux transaction was failing because the busy bit for the given gpio
pin was always set. The busy bit was alway set because the
programming sequence to read, modify and write busy bit was not
atomic. Due to which when multiple threads are trying to modify the
busy bits for their gpio pins in the same integer variable sometimes
the busy bits integer variable is written with old data causing
failure.
[how]
Instead of using individual bits to track gpio pins and grouping
them to integers, one byte will be allcoated for each gpio pin.
Now whenever a gpio pin needs to be set to mark being used, only
writing a value of one to that byte is sufficient, other bytes
are not impacted. Also no need to have atomicity with bytes unlike
with bits.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When paging queue is enabled, it use the second page of doorbell.
The AMDGPU_DOORBELL64_MAX_ASSIGNMENT definition assumes all the
kernel doorbells are in the first page. So with paging queue enabled,
the total kernel doorbell range should be original num_doorbell plus
one page (0x400 in dword), not *2.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With scaling, underscan and abm changes we can end up calling
commit_planes_to_stream in commit_tail. This call uses dm_state->context
which can be NULL if the commit was a fast update.
[How]
Use dc_state instead since that can't be NULL unless the system ran
out of memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108912
Fixes: e64abff2f133 ("drm/amd/display: Use private obj helpers for dm_atomic_state")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.
[How]
Update min_dcfclock_khz based on min_engine_clock value.
v2: backport to 4.20 (Alex)
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.
Banding occurs for these displays.
[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.
Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For XGMI hive case do reset in steps where each step iterates over
all devs in hive. This especially important for asic reset
since all PSP FW in hive must come up within a limited time
(around 1 sec) to properply negotiate the link.
Do this by refactoring amdgpu_device_gpu_recover and amdgpu_device_reset
into pre_asic_reset, asic_reset and post_asic_reset functions where is part
is exectued for all the GPUs in the hive before going to the next step.
v2: Update names for amdgpu_device_lock/unlock functions.
v3: Introduce per hive locking to avoid multiple resets for GPUs
in same hive.
v4:
Remove delayed_workqueue()/ttm_bo_unlock_delayed_workqueue() - they
are copy & pasted over from radeon and on amdgpu there isn't
any reason for that any more.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's needed for device reset of entire hive.
v3:
Add per hive lock to allow avoiding duplicate resets triggered by
multiple members of same hive.
Expose amdgpu_hive_info instead of adding getter functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is prep work for updating each PSP FW in hive after
GPU reset.
Split into build topology SW state and update each PSP FW in the hive.
Save topology and count of XGMI devices for reuse.
v2: Create seperate header for XGMI.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for AMDGPU specific FreeSync properties and ioctls are dropped
from amdgpu_dm in favor of supporting drm variable refresh rate
properties.
The notify_freesync and set_freesync_property functions are dropped
from amdgpu_display_funcs.
The drm vrr_capable property is now attached to any DP/HDMI connector.
Its value is updated accordingly to the connector's FreeSync capabiltiy.
The freesync_enable logic and ioctl control has has been dropped in
favor of utilizing the vrr_enabled on the drm CRTC. This allows for more
fine grained atomic control over which CRTCs should support variable
refresh rate.
To handle state changes for vrr_enabled it was easiest to drop the
forced modeset on freesync_enabled change. This patch now performs the
required stream updates when planes are flipped.
This is done for a few reasons:
(1) VRR stream updates can be done in the fast update path
(2) amdgpu_dm_atomic_check would need to be hacked apart to check
desired variable refresh state and capability before the CRTC
disable pass.
(3) Performing VRR stream updates on-flip is needed for enabling BTR
support.
VRR packets and timing adjustments are now tracked and compared to
previous values sent to the hardware.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When variable refresh rate is active the hardware counter can return
a position >= vtotal. This results in a vpos being returned from
amdgpu_display_get_crtc_scanoutpos that's a positive value. The
positive value indicates to the caller that the display is
currently in scanout when the display is actually still in vblank.
This is because the vfront porch duration is unknown with variable
refresh active and will end when either a page flip occurs or the
timeout specified by the driver/display is reached.
The behavior of the amdgpu_display_get_crtc_scanoutpos remains the
same when the position is below vtotal. When the position is above
vtotal the function will return a value that is effectively -vbl_end,
the size of the vback porch.
The only caller affected by this change is the DRM helper for
calculating vblank timestamps. This change corrects behavior for
calculating the page flip timestamp from being the previous timestamp
to the calculation to the next timestamp when position >= vtotal.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a preparation work to make reserved doorbell index per device,
instead of using a global macro definition. By doing this, we can easily
change doorbell layout for future ASICs while not affecting ASICs in
production.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Two non-blocking commits in succession can result in a sequence where
the same dc->current_state is queried for both commits.
1. 1st commit -> check -> commit -> swaps atomic state -> queues work
2. 2nd commit -> check -> commit -> swaps atomic state -> queues work
3. 1st commit work finishes
The issue with this sequence is that the same dc->current_state is
read in both atomic checks. If the first commit modifies streams or
planes those will be missing from the dc->current_state for the
second atomic check. This result in many stream and plane errors in
atomic commit tail.
[How]
The driver still needs to track old to new state to determine if the
commit in its current implementation. Updating the dc_state in
atomic tail is wrong since the dc_state swap should be happening as
part of drm_atomic_helper_swap_state *before* the worker queue kicks
its work off.
The simplest replacement for the subclassing (which doesn't properly
manage the old to new atomic state swap) is to use the drm private
object helpers. While some of the dc_state members could be merged
into dm_crtc_state or dm_plane_state and copied over that way it is
easier for now to just treat the whole dc_state structure as a single
private object.
This allows amdgpu_dm to drop the dc->current_state copy from within
atomic check. It's replaced by a copy from the current atomic state
which is propagated correctly for the sequence described above.
Since access to the dm_state private object is now locked this should
also fix issues that could arise if submitting non-blocking commits
from different threads.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.
This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't bounce back to the root level for fragment processing, because
huge pages are not supported at that level. This is unlikely to happen
with the default VM size on Vega, but can be exposed by limiting the
VM size with the amdgpu.vm_size module parameter.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in the module description text and
a comment too, fix them. Also line break overly long comment.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACPI ATIF has a function called query
backlight transfer characteristics. Among the
information returned by this function is
the minimum and maximum input signals for the
backlight
Call that function on ACPI init. When DM
backlight device is updated, copy over the
backlight caps into DM, but only once. Use
the backlight caps in the backlight-to-dc
calculation
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
