Instead of providing it from outside figure out the ats status in the
function itself from the data structures.
v2: simplify finding the right level
v3: partially revert changes from v2, more cleanup and split code
into more functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An earlier commit replaced ttm_bo_wait with amdgpu_bo_sync_wait and
removed the error return assignment to variable ret. Fix this by adding
the assignment back. Also break line to clean up checkpatch overly
long line warning.
Detected by CoverityScan, CID#1477327 ("Logically dead code")
Fixes: c60cd590cb ("drm/amdgpu: Replace ttm_bo_wait with amdgpu_bo_sync_wait")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Page faults can easily overwhelm the interrupt handler.
So to make sure that we never lose valuable interrupts on the primary ring
we re-route page faults to IH ring 1.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_tiling_mode_table_init’:
./include/linux/device.h:1487:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
_dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:3236:3: note: in expansion of macro ‘dev_warn’
dev_warn(adev->dev,
^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:3240:2: note: here
case CHIP_CARRIZO:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 6 files that return (in bytes):
The total amount of VRAM/visible VRAM/GTT
and the current total used VRAM/visible VRAM/GTT
v2: Split used and total into separate files
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sys interface to set socclk, fclk and dcefclk for smu.
Add feature_mask parameter for smu_upload_dpm_level as socclk, fclk and
dcefclk have dependency, without feature_mask to point out specific clk
will make it fail to set some clk.
Fix the function of smu_unforce_dpm_levels.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Gui Chengming <Jack.Gui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1, set get_pwm1_enable and set_pwm1_enable functions to call
smu_get_fan_control_mode and smu_set_fan_control_mode for SMU11
2, implement set_fan_control_mode function
v2: add return value in set_fan_control_mode function
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unify power stade adjust function into smu_handle_task by the judgment
of task_id.
Move functions which have no relationship with smu version into the file
of amdgpu_smu.
Modified the function of smu_display_config_changed into two part.
Unify some similiar function.
v2: Correct the operation of upload dpm level when force dpm limit value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pp_table sysfs interface for new sw-smu.
get: return pptable raw data
set: write pptable raw data to pptable, then reset smu (hw_fini -> hw_init)
v2: fix mutex lock issue
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/si_dpm.c: In function 'si_program_response_times':
drivers/gpu/drm/amd/amdgpu/si_dpm.c:4101:29: warning:
variable 'backbias_response_time' set but not used [-Wunused-but-set-variable]
It's never used since introduction in 841686df9f ("drm/amdgpu: add SI DPM
support (v4)"), so can be removed
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c: In function 'update_gpuvm_pte':
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:840:20: warning:
variable 'bo' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:838:20: warning:
variable 'vm' set but not used [-Wunused-but-set-variable]
They're never used since introduction in a46a2cd103 ("drm/amdgpu: Add GPUVM
memory management functions for KFD")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is recommended by HW designers. Previously when it was set to 1,
the PDE walk error in VM fault will be treated as
PERMISSION_OR_INVALID_PAGE_FAULT rather than usually expected OTHER_FAULT.
As a result, the retry control in VM_CONTEXT*_CNTL will change accordingly.
The above behavior is kind of abnormal. Furthermore, the
PDE_FAULT_CLASSIFICATION == 1 feature was targeted for very old ASICs
and it never made it way to production. Therefore, we should set it to 0.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>