ida instances allocate some internal memory for ->free_bitmap
in addition to the base 'struct ida'. Use ida_destroy() to release
that memory at module_exit().
Fixes: 4b45efe852 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Intel Elkhart Lake has the same LPSS than Intel Broxton.
Add the new IDs to the list of supported devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
<asm/olpc.h> provides machine_is_olpc() stub for CONFIG_OLPC=n,
compiler should just optimize the unneeded bits away.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Clang warns:
In file included from drivers/mfd/stmfx.c:13:
include/linux/mfd/stmfx.h:7:9: warning: 'MFD_STMFX_H' is used as a
header guard here, followed by #define of a different macro
[-Wheader-guard]
Fixes: 06252ade91 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/475
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Swap PMIC and MULTIFUNCTION words in the title to:
- show that this is about Intel PMICs
- keep MAINTAINERS properly sorted
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
With this patch, the cros_ec_ctl driver will register the legacy
accelerometer driver (named cros_ec_accel_legacy) if it fails to
register sensors through the usual path cros_ec_sensors_register().
This legacy device is present on Chromebook devices with older EC
firmware only supporting deprecated EC commands:
- Glimmer based devices [Intel SOC using LPC transport]
- Veyron minnie devices [ARM SOC using SPI transport]
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
RK805 has SLEEP signal, which can put the device into SLEEP or OFF
mode. The default is SLEEP mode.
However, when the kernel performs power-off (actually the ATF) the
device will not go fully off and this will result in higher power
consumption and inability to wake the device with RTC alarm.
The solution is to enable pm_power_off_prepare function, which will
configure SLEEP pin for OFF function.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The function pointer pm_power_off may point to function from other
module (PSCI for example). If rk808 is removed, pm_power_off is
overwritten to NULL and the system cannot be powered off.
This patch checks if pm_power_off points to a module function.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
System Companion Processor (SCP) is Cortex M4 co-processor on some
MediaTek platform that can run EC-style firmware. Since a SCP and EC
would both exist on a system, and use the cros_ec_dev driver, we need to
differentiate between them for the userspace, or they would both be
registered at /dev/cros_ec, causing a conflict.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds all the core support and defines for the Cirrus
Logic CS42L92, CS47L92 and CS47L93 smart audio CODECs.
Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds all the core support and defines for the Cirrus
Logic CS47L15 smart audio CODEC.
Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This adds the cs47l15, cs42l92, cs47l92 and cs47l93 to the list of
compatible strings and updates some properties that need to note
the new CODECs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Currently we are relying on the exact match of the regulator name to
find MICVDD, we should add an explicit supply mapping to allow this to
be found more reliably.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When the driver is used with a subdevice that is disabled in the
kernel configuration, clang gets a little confused about the
control flow and fails to notice that n_subdevs is only
uninitialized when subdevs is NULL, and we check for that,
leading to a false-positive warning:
drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here
[-Werror,-Wuninitialized]
subdevs, n_subdevs, NULL, 0, NULL);
^~~~~~~~~
drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning
int n_subdevs, ret, i;
^
= 0
Ideally, we would rearrange the code to avoid all those early
initializations and have an explicit exit in each disabled case,
but it's much easier to chicken out and add one more initialization
here to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The logic for setting the of_node on devices created by mfd did not set
the fwnode pointer to match, which caused fwnode-based APIs to
malfunction on these devices since the fwnode pointer was null. Fix
this.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Easier to find and maintain if the device tables sorted by ID.
Do it here for intel-lpss MFD driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The RTC core already has error messages in case of failure, there is no
need to have another message in the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Allow overwriting the values in BD718XX_REG_PWRONCONFIG0 and
BD718XX_REG_PWRONCONFIG1 via devicetree. Read values in milliseconds and
attempt to round them to something supported by the hardware.
Keep existing values (from bootloader or OTP) if property is not
present.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
[Lee: Fixed-up merge/API conflict]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The reset button on imx8mm-evk is tied to PWRON_B pin of bd71847 and the
long press duration is set to zero from OTP. The linux driver overrides
those values and breaks reset from button.
Overwriting OTP or bootloader configuration with some hardcoded defaults
is not desirable, keep already programmed values instead.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Register driver when EC indicates has precise lid angle calculation code
running.
Fix incorrect extra resource allocation in cros_ec_sensors_register().
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
MODULE_DEVICE_TABLE(of, <of_match_table>) should be called to complete DT
OF mathing mechanism and register it.
Before this patch:
modinfo ./drivers/mfd/madera.ko | grep alias
After this patch:
modinfo ./drivers/mfd/madera.ko | grep alias
alias: of:N*T*Ccirrus,wm1840C*
alias: of:N*T*Ccirrus,wm1840
alias: of:N*T*Ccirrus,cs47l91C*
alias: of:N*T*Ccirrus,cs47l91
alias: of:N*T*Ccirrus,cs47l90C*
alias: of:N*T*Ccirrus,cs47l90
alias: of:N*T*Ccirrus,cs47l85C*
alias: of:N*T*Ccirrus,cs47l85
alias: of:N*T*Ccirrus,cs47l35C*
alias: of:N*T*Ccirrus,cs47l35
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Currently the LP87565_DEVICE_TYPE_LP87561_Q1 case does not have a
break statement, causing it to fall through to a dev_err message.
Fix this by adding in the missing break statement.
Addresses-Coverity: ("Missing break in switch")
Fixes: 7ee63bd747 ("regulator: lp87565: Add 4-phase lp87561 regulator support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This moves everything out of extent-tree.c to block-rsv.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
block_rsv_release_bytes() is the internal to the block_rsv code, and
shouldn't be called directly by anything else. Switch all users to the
exported helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This works for all callers already, but if we wanted to use the helper
for the global_block_rsv it would end up trying to refill itself. Fix
the logic to be able to be used no matter which block rsv is passed in
to this helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delalloc reserve stuff calls this directly because it cares about
the qgroup accounting stuff, so export it so we can move it around. Fix
btrfs_block_rsv_release() to just be a static inline since it just calls
__btrfs_block_rsv_release() with NULL for the qgroup stuff.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used in a few places, we need to make sure it's exported so we
can move it around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prep work for separating out all of the block_rsv related code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need an if-else-if chain where we can use a simple OR since
both conditions are performing the same action. The short-circuit for OR
will ensure that if the first condition is true, can_overcommit() is not
called.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've moved all of the users to space-info.c, unexport it and
name it back to can_overcommit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This moves all of the metadata reservation code into space-info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We'll need this exported so we can use it in all the various was we need
to use it. This is prep work to move reserve_metadata_bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to need this to move the metadata reservation stuff to
space_info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've moved all the pre-requisite stuff, move these two
functions.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Also rename it to btrfs_space_info_update_* so it's clear what we're
updating.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the first piece of moving the space reservation code to
space-info.c
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are the basic init and lookup functions and some helper functions,
fairly straightforward before the bad stuff starts.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prep work for consolidating all of the space_info code into one file.
We need to export these so multiple files can use them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Really we just need the enum, but as we break more things up it'll help
to have this external to extent-tree.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Migrate the struct definition and the one helper that's in ctree.h into
space-info.h
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.
Signed-off-by: David Sterba <dsterba@suse.com>
Minimum stripe count matches the minimum devices required for a given
profile. The open coded assignments match the raid_attr table.
What's changed here is the meaning for RAID5/6. Previously their
min_stripes would be 1, while newly it's devs_min. This however shold be
the same as before because it's not possible to create filesystem on
fewer devices than the raid_attr table allows.
There's no adjustment regarding the parity stripes (like
calc_data_stripes does), because we're interested in overall space that
would fit on the devices.
Missing devices make no difference for the whole calculation, we have
the size stored in the structures.
Signed-off-by: David Sterba <dsterba@suse.com>
Special case for DUP can be replaced by lookup to the attribute table,
where the dev_stripes is the right coefficient.
Signed-off-by: David Sterba <dsterba@suse.com>
