Like reconf_enable, prsctp_enable should also be removed from asoc,
as asoc->peer.prsctp_capable has taken its job.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
asoc's reconf support is actually decided by the 4-shakehand negotiation,
not something that users can set by sockopt. asoc->peer.reconf_capable is
working for this. So remove it from asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Probable cut&paste typo - use the correct field size.
(Not currently a practical problem since these two fields have the same
size, but we should fix it anyway.)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
linkmode_mod_bit is introduced as a helper function to set/clear
bits in a linkmode.
Replace the if else code structure with a call to the helper
linkmode_mod_bit.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
John Hurley says:
====================
Add MPLS actions to TC
This patchset introduces a new TC action module that allows the
manipulation of the MPLS headers of packets. The code impliments
functionality including push, pop, and modify.
Also included are tests for the new funtionality. Note that these will
require iproute2 changes to be submitted soon.
NOTE: these patches are applied to net-next along with the patch:
[PATCH net 1/1] net: openvswitch: fix csum updates for MPLS actions
This patch has been accepted into net but, at time of posting, is not yet
in net-next.
v6-v7:
- add extra tests for setting max/min and exceeding range of fields -
patch 5 (Roman Mashak)
v5-v6:
- add CONFIG_NET_ACT_MPLS to tc-testing config file - patch 5
(Davide Caratti)
v4-v5:
- move mpls_hdr() call to after skb_ensure_writable - patch 3
(Willem de Bruijn)
- move mpls_dec_ttl to helper - patch 4 (Willem de Bruijn)
- add iproute2 usage example to commit msg - patch 4 (David Ahern)
- align label validation with mpls core code - patch 4 (David Ahern)
- improve extack message for no proto in mpls pop - patch 4 (David Ahern)
v3-v4:
- refactor and reuse OvS code (Cong Wang)
- use csum API rather than skb_post*rscum to update skb->csum (Cong Wang)
- remove unnecessary warning (Cong Wang)
- add comments to uapi attributes (David Ahern)
- set strict type policy check for TCA_MPLS_UNSPEC (David Ahern)
- expand/improve extack messages (David Ahern)
- add option to manually set BOS
v2-v3:
- remove a few unnecessary line breaks (Jiri Pirko)
- retract hw offload patch from set (resubmit with driver changes) (Jiri)
v1->v2:
- ensure TCA_ID_MPLS does not conflict with TCA_ID_CTINFO (Davide Caratti)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, TC offers the ability to match on the MPLS fields of a packet
through the use of the flow_dissector_key_mpls struct. However, as yet, TC
actions do not allow the modification or manipulation of such fields.
Add a new module that registers TC action ops to allow manipulation of
MPLS. This includes the ability to push and pop headers as well as modify
the contents of new or existing headers. A further action to decrement the
TTL field of an MPLS header is also provided with a new helper added to
support this.
Examples of the usage of the new action with flower rules to push and pop
MPLS labels are:
tc filter add dev eth0 protocol ip parent ffff: flower \
action mpls push protocol mpls_uc label 123 \
action mirred egress redirect dev eth1
tc filter add dev eth0 protocol mpls_uc parent ffff: flower \
action mpls pop protocol ipv4 \
action mirred egress redirect dev eth1
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_warn_bad_offload and netdev_rx_csum_fault trigger on hard to debug
issues. Dump more state and the header.
Optionally dump the entire packet and linear segment. This is required
to debug checksum bugs that may include bytes past skb_tail_pointer().
Both call sites call this function inside a net_ratelimit() block.
Limit full packet log further to a hard limit of can_dump_full (5).
Based on an earlier patch by Cong Wang, see link below.
Changes v1 -> v2
- dump frag_list only on full_pkt
Link: https://patchwork.ozlabs.org/patch/1000841/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Processes can request ipv6 flowlabels with cmsg IPV6_FLOWINFO.
If not set, by default an autogenerated flowlabel is selected.
Explicit flowlabels require a control operation per label plus a
datapath check on every connection (every datagram if unconnected).
This is particularly expensive on unconnected sockets multiplexing
many flows, such as QUIC.
In the common case, where no lease is exclusive, the check can be
safely elided, as both lease request and check trivially succeed.
Indeed, autoflowlabel does the same even with exclusive leases.
Elide the check if no process has requested an exclusive lease.
fl6_sock_lookup previously returns either a reference to a lease or
NULL to denote failure. Modify to return a real error and update
all callers. On return NULL, they can use the label and will elide
the atomic_dec in fl6_sock_release.
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Changes RFC->v1:
- use static_key_false_deferred to rate limit jump label operations
- call static_key_deferred_flush to stop timers on exit
- move decrement out of RCU context
- defer optimization also if opt data is associated with a lease
- updated all fp6_sock_lookup callers, not just udp
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
If an app is playing tricks to reuse a socket via tcp_disconnect(),
bytes_acked/received needs to be reset to 0. Otherwise tcp_info will
report the sum of the current and the old connection..
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 0df48c26d8 ("tcp: add tcpi_bytes_acked to tcp_info")
Fixes: bdd1f9edac ("tcp: add tcpi_bytes_received to tcp_info")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IFLA_BOND_PEER_NOTIF_DELAY was set to the value of downdelay instead
of peer_notif_delay. After this change, the correct value is exported.
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
socket->wq is assign-once, set when we are initializing both
struct socket it's in and struct socket_wq it points to. As the
matter of fact, the only reason for separate allocation was the
ability to RCU-delay freeing of socket_wq. RCU-delaying the
freeing of socket itself gets rid of that need, so we can just
fold struct socket_wq into the end of struct socket and simplify
the life both for sock_alloc_inode() (one allocation instead of
two) and for tun/tap oddballs, where we used to embed struct socket
and struct socket_wq into the same structure (now - embedding just
the struct socket).
Note that reference to struct socket_wq in struct sock does remain
a reference - that's unchanged.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
we do have an RCU-delayed part there already (freeing the wq),
so it's not like the pipe situation; moreover, it might be
worth considering coallocating wq with the rest of struct sock_alloc.
->sk_wq in struct sock would remain a pointer as it is, but
the object it normally points to would be coallocated with
struct socket...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull request_key improvements from David Howells:
"These are all request_key()-related, including a fix and some improvements:
- Fix the lack of a Link permission check on a key found by
request_key(), thereby enabling request_key() to link keys that
don't grant this permission to the target keyring (which must still
grant Write permission).
Note that the key must be in the caller's keyrings already to be
found.
- Invalidate used request_key authentication keys rather than
revoking them, so that they get cleaned up immediately rather than
hanging around till the expiry time is passed.
- Move the RCU locks outwards from the keyring search functions so
that a request_key_rcu() can be provided. This can be called in RCU
mode, so it can't sleep and can't upcall - but it can be called
from LOOKUP_RCU pathwalk mode.
- Cache the latest positive result of request_key*() temporarily in
task_struct so that filesystems that make a lot of request_key()
calls during pathwalk can take advantage of it to avoid having to
redo the searching. This requires CONFIG_KEYS_REQUEST_CACHE=y.
It is assumed that the key just found is likely to be used multiple
times in each step in an RCU pathwalk, and is likely to be reused
for the next step too.
Note that the cleanup of the cache is done on TIF_NOTIFY_RESUME,
just before userspace resumes, and on exit"
* tag 'keys-request-20190626' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Kill off request_key_async{,_with_auxdata}
keys: Cache result of request_key*() temporarily in task_struct
keys: Provide request_key_rcu()
keys: Move the RCU locks outwards from the keyring search functions
keys: Invalidate used request_key authentication keys
keys: Fix request_key() lack of Link perm check on found key
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-07-09
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Lots of libbpf improvements: i) addition of new APIs to attach BPF
programs to tracing entities such as {k,u}probes or tracepoints,
ii) improve specification of BTF-defined maps by eliminating the
need for data initialization for some of the members, iii) addition
of a high-level API for setting up and polling perf buffers for
BPF event output helpers, all from Andrii.
2) Add "prog run" subcommand to bpftool in order to test-run programs
through the kernel testing infrastructure of BPF, from Quentin.
3) Improve verifier for BPF sockaddr programs to support 8-byte stores
for user_ip6 and msg_src_ip6 members given clang tends to generate
such stores, from Stanislav.
4) Enable the new BPF JIT zero-extension optimization for further
riscv64 ALU ops, from Luke.
5) Fix a bpftool json JIT dump crash on powerpc, from Jiri.
6) Fix an AF_XDP race in generic XDP's receive path, from Ilya.
7) Various smaller fixes from Ilya, Yue and Arnd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull misc keyring updates from David Howells:
"These are some miscellaneous keyrings fixes and improvements:
- Fix a bunch of warnings from sparse, including missing RCU bits and
kdoc-function argument mismatches
- Implement a keyctl to allow a key to be moved from one keyring to
another, with the option of prohibiting key replacement in the
destination keyring.
- Grant Link permission to possessors of request_key_auth tokens so
that upcall servicing daemons can more easily arrange things such
that only the necessary auth key is passed to the actual service
program, and not all the auth keys a daemon might possesss.
- Improvement in lookup_user_key().
- Implement a keyctl to allow keyrings subsystem capabilities to be
queried.
The keyutils next branch has commits to make available, document and
test the move-key and capabilities code:
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log
They're currently on the 'next' branch"
* tag 'keys-misc-20190619' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Add capability-checking keyctl function
keys: Reuse keyring_index_key::desc_len in lookup_user_key()
keys: Grant Link permission to possessers of request_key auth keys
keys: Add a keyctl to move a key between keyrings
keys: Hoist locking out of __key_link_begin()
keys: Break bits out of key_unlink()
keys: Change keyring_serialise_link_sem to a mutex
keys: sparse: Fix kdoc mismatches
keys: sparse: Fix incorrect RCU accesses
keys: sparse: Fix key_fs[ug]id_changed()
Pull selinux updates from Paul Moore:
"Like the audit pull request this is a little early due to some
upcoming vacation plans and uncertain network access while I'm away.
Also like the audit PR, the list of patches here is pretty minor, the
highlights include:
- Explicitly use __le variables to make sure "sparse" can verify
proper byte endian handling.
- Remove some BUG_ON()s that are no longer needed.
- Allow zero-byte writes to the "keycreate" procfs attribute without
requiring key:create to make it easier for userspace to reset the
keycreate label.
- Consistently log the "invalid_context" field as an untrusted string
in the AUDIT_SELINUX_ERR audit records"
* tag 'selinux-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: format all invalid context as untrusted
selinux: fix empty write to keycreate file
selinux: remove some no-op BUG_ONs
selinux: provide __le variables explicitly
Pull audit updates from Paul Moore:
"This pull request is a bit early, but with some vacation time coming
up I wanted to send this out now just in case the remote Internet Gods
decide not to smile on me once the merge window opens. The patchset
for v5.3 is pretty minor this time, the highlights include:
- When the audit daemon is sent a signal, ensure we deliver
information about the sender even when syscall auditing is not
enabled/supported.
- Add the ability to filter audit records based on network address
family.
- Tighten the audit field filtering restrictions on string based
fields.
- Cleanup the audit field filtering verification code.
- Remove a few BUG() calls from the audit code"
* tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove the BUG() calls in the audit rule comparison functions
audit: enforce op for string fields
audit: add saddr_fam filter field
audit: re-structure audit field valid checks
audit: deliver signal_info regarless of syscall
Pull tpm updates from Jarkko Sakkinen:
"This contains two critical bug fixes and support for obtaining TPM
events triggered by ExitBootServices().
For the latter I have to give a quite verbose explanation not least
because I had to revisit all the details myself to remember what was
going on in Matthew's patches.
The preboot software stack maintains an event log that gets entries
every time something gets hashed to any of the PCR registers. What
gets hashed could be a component to be run or perhaps log of some
actions taken just to give couple of coarse examples. In general,
anything relevant for the boot process that the preboot software does
gets hashed and a log entry with a specific event type [1].
The main application for this is remote attestation and the reason why
it is useful is nicely put in the very first section of [1]:
"Attestation is used to provide information about the platform’s
state to a challenger. However, PCR contents are difficult to
interpret; therefore, attestation is typically more useful when
the PCR contents are accompanied by a measurement log. While not
trusted on their own, the measurement log contains a richer set of
information than do the PCR contents. The PCR contents are used to
provide the validation of the measurement log."
Because EFI_TCG2_PROTOCOL.GetEventLog() is not available after calling
ExitBootServices(), Linux EFI stub copies the event log to a custom
configuration table. Unfortunately, ExitBootServices() also generates
events and obviously these events do not get copied to that table.
Luckily firmware does this for us by providing a configuration table
identified by EFI_TCG2_FINAL_EVENTS_TABLE_GUID.
This essentially contains necessary changes to provide the full event
log for the use the user space that is concatenated from these two
partial event logs [2]"
[1] https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification/
[2] The final concatenation is done in drivers/char/tpm/eventlog/efi.c
* tag 'tpmdd-next-20190625' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Don't duplicate events from the final event log in the TCG2 log
Abstract out support for locating an EFI config table
tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operations
efi: Attempt to get the TCG2 event log in the boot stub
tpm: Append the final event log to the TPM event log
tpm: Reserve the TPM final events table
tpm: Abstract crypto agile event size calculations
tpm: Actually fail on TPM errors during "get random"
Pull x86 topology updates from Ingo Molnar:
"Implement multi-die topology support on Intel CPUs and expose the die
topology to user-space tooling, by Len Brown, Kan Liang and Zhang Rui.
These changes should have no effect on the kernel's existing
understanding of topologies, i.e. there should be no behavioral impact
on cache, NUMA, scheduler, perf and other topologies and overall
system performance"
* 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/rapl: Cosmetic rename internal variables in response to multi-die/pkg support
perf/x86/intel/uncore: Cosmetic renames in response to multi-die/pkg support
hwmon/coretemp: Cosmetic: Rename internal variables to zones from packages
thermal/x86_pkg_temp_thermal: Cosmetic: Rename internal variables to zones from packages
perf/x86/intel/cstate: Support multi-die/package
perf/x86/intel/rapl: Support multi-die/package
perf/x86/intel/uncore: Support multi-die/package
topology: Create core_cpus and die_cpus sysfs attributes
topology: Create package_cpus sysfs attribute
hwmon/coretemp: Support multi-die/package
powercap/intel_rapl: Update RAPL domain name and debug messages
thermal/x86_pkg_temp_thermal: Support multi-die/package
powercap/intel_rapl: Support multi-die/package
powercap/intel_rapl: Simplify rapl_find_package()
x86/topology: Define topology_logical_die_id()
x86/topology: Define topology_die_id()
cpu/topology: Export die_id
x86/topology: Create topology_max_die_per_package()
x86/topology: Add CPUID.1F multi-die/package support
sysfs_notify() and kobject_uevent() are passed the wrong device.
fan_data->hwmon_dev needs to be passed, so that sysfs notification
goes to right place and generated uevent has the right information
Signed-off-by: Christian Schneider <cschneider@radiodata.biz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This makes it possible to use the hwmon_dev in fan_alarm_notify(). Otherwise
it would be possible, that a interupt arrives and fan_alarm_notify() is
executed, before hwmon_dev is initialized.
Signed-off-by: Christian Schneider <cschneider@radiodata.biz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The code to update the configuration register is repeated several times.
Move it into a separate function. At the same time, un-inline
lm90_select_remote_channel() and leave it up to the compiler to decide
what to do with it. Also remove the 'client' argument from
lm90_select_remote_channel() and from lm90_write_convrate() and take
it from struct lm90_data instead where needed.
This patch reduces code size by more than 800 bytes on x86_64.
Cc: Boyang Yu <byu@arista.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The configuration register does not change on its own. Yet, it is read
in various locations, modified, and written back. Simplify and optimize
the code by caching its value and by only writing it back when needed.
Cc: Boyang Yu <byu@arista.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
max6658 may report unrealistically high temperature during
the driver initialization, for which, its overtemp alarm pin
also gets asserted. For certain devices implementing overtemp
protection based on that pin, it may further trigger a reset to
the device. By reproducing the problem, the wrong reading is
found to be coincident with changing the conversion rate.
To mitigate this issue, set the stop bit before changing the
conversion rate and unset it thereafter. After such change, the
wrong reading is not reproduced. Apply this change only to the
max6657 kind for now, controlled by flag LM90_PAUSE_ON_CONFIG.
Signed-off-by: Boyang Yu <byu@arista.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Linux style for comments is the C89 "/* ... */" style,
changes the comments to Linux style.
Signed-off-by: amy.shih <amy.shih@advantech.com.tw>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When register read and write operations return errors, needs to add
error handling.
Signed-off-by: amy.shih <amy.shih@advantech.com.tw>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Currently, kheaders_data.tar.xz contains some build scripts as well as
headers. None of them is needed in the header archive.
For ARCH=x86, this commit excludes the following from the archive:
arch/x86/include/asm/Kbuild
arch/x86/include/uapi/asm/Kbuild
include/asm-generic/Kbuild
include/config/auto.conf
include/config/kernel.release
include/config/tristate.conf
include/uapi/asm-generic/Kbuild
include/uapi/Kbuild
kernel/gen_kheaders.sh
This change is actually motivated for the planned header compile-testing
because it will generate more build artifacts, which should not be
included in the archive.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The -R option of 'ls' is supposed to be used for directories.
-R, --recursive
list subdirectories recursively
Since 'find ... -type f' only matches to regular files, we do not
expect directories passed to the 'ls' command here.
Giving -R is harmless at least, but unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
In my view, most of headers can be self-contained. So, it would be
tedious to add every header to header-test-y explicitly. We usually
end up with "all headers with some exceptions".
There are two types in exceptions:
[1] headers that are never compiled as standalone units
For examples, include/linux/compiler-gcc.h is not intended for
direct inclusion. We should always exclude such ones.
[2] headers that are conditionally compiled as standalone units
Some headers can be compiled only for particular architectures.
For example, include/linux/arm-cci.h can be compiled only for
arm/arm64 because it requires <asm/arm-cci.h> to exist.
Clang can compile include/soc/nps/mtm.h only for arc because
it contains an arch-specific register in inline assembler.
So, you can write Makefile like this:
header-test- += linux/compiler-gcc.h
header-test-$(CONFIG_ARM) += linux/arm-cci.h
header-test-$(CONFIG_ARM64) += linux/arm-cci.h
header-test-$(CONFIG_ARC) += soc/nps/mtm.h
The new syntax header-test-pattern-y will be useful to specify
"the rest".
The typical usage is like this:
header-test-pattern-y += */*.h
This will add all the headers in sub-directories to the test coverage,
excluding $(header-test-). In this regards, header-test-pattern-y
behaves like a weaker variant of header-test-y.
Caveat:
The patterns in header-test-pattern-y are prefixed with $(srctree)/$(src)/
but not $(objtree)/$(obj)/. Stale generated headers are often left over
when you traverse the git history without cleaning. Wildcard patterns for
$(objtree) may match to stale headers, which could fail to compile.
One pitfall is $(srctree)/$(src)/ and $(objtree)/$(obj)/ point to the
same directory for in-tree building. So, header-test-pattern-y should
be used with care since it can potentially match to stale headers.
Caveat2:
You could use wildcard for header-test-. For example,
header-test- += asm-generic/%
... will exclude headers in asm-generic directory. Unfortunately, the
wildcard character is '%' instead of '*' here because this is evaluated
by $(filter-out ...) whereas header-test-pattern-y is evaluated by
$(wildcard ...). This is a kludge, but seems useful in some places...
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
header-test-y does not work with headers in sub-directories.
For example, you may want to write a Makefile, like this:
include/linux/Kbuild:
header-test-y += mtd/nand.h
This entry will create a wrapper include/linux/mtd/nand.hdrtest.c
with the following content:
#include "mtd/nand.h"
To make this work, we need to add $(srctree)/include/linux to the
header search path. It would be tedious to add ccflags-y.
Instead, we could change the *.hdrtest.c rule to wrap:
#include "nand.h"
This works for in-tree build since #include "..." searches in the
relative path from the header with this directive. For O=... build,
we need to add $(srctree)/include/linux/mtd to the header search path,
which will be even more tedious.
After all, I thought it would be handier to compile headers directly
without creating wrappers.
I added a new build rule to compile %.h into %.h.s
The target is %.h.s instead of %.h.o because it is slightly faster.
Also, as for GCC, an empty assembly is smaller than an empty object.
I wrote the build rule:
$(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<
instead of:
$(CC) $(c_flags) -S -o $@ -x c $<
Both work fine with GCC, but the latter is bad for Clang.
This comes down to the difference in the -Wunused-function policy.
GCC does not warn about unused 'static inline' functions at all.
Clang does not warn about the ones in included headers, but does
about the ones in the source. So, we should handle headers as
headers, not as source files.
In fact, this has been hidden since commit abb2ea7dfd ("compiler,
clang: suppress warning for unused static inline functions"), but we
should not rely on that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Pull x86 platform updayes from Ingo Molnar:
"Most of the commits add ACRN hypervisor guest support, plus two
cleanups"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/jailhouse: Mark jailhouse_x2apic_available() as __init
x86/platform/geode: Drop <linux/gpio.h> includes
x86/acrn: Use HYPERVISOR_CALLBACK_VECTOR for ACRN guest upcall vector
x86: Add support for Linux guests on an ACRN hypervisor
x86/Kconfig: Add new X86_HV_CALLBACK_VECTOR config symbol
Pull x86 paravirt updates from Ingo Molnar:
"A handful of paravirt patching code enhancements to make it more
robust against patching failures, and related cleanups and not so
related cleanups - by Thomas Gleixner and myself"
* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Rename paravirt_patch_site::instrtype to paravirt_patch_site::type
x86/paravirt: Standardize 'insn_buff' variable names
x86/paravirt: Match paravirt patchlet field definition ordering to initialization ordering
x86/paravirt: Replace the paravirt patch asm magic
x86/paravirt: Unify the 32/64 bit paravirt patching code
x86/paravirt: Detect over-sized patching bugs in paravirt_patch_call()
x86/paravirt: Detect over-sized patching bugs in paravirt_patch_insns()
x86/paravirt: Remove bogus extern declarations
Pull x86 AVX512 status update from Ingo Molnar:
"This adds a new ABI that the main scheduler probably doesn't want to
deal with but HPC job schedulers might want to use: the
AVX512_elapsed_ms field in the new /proc/<pid>/arch_status task status
file, which allows the user-space job scheduler to cluster such tasks,
to avoid turbo frequency drops"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/filesystems/proc.txt: Add arch_status file
x86/process: Add AVX-512 usage elapsed time to /proc/pid/arch_status
proc: Add /proc/<pid>/arch_status
Pull x86 cleanups from Ingo Molnar:
"Misc small cleanups: removal of superfluous code and coding style
cleanups mostly"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kexec: Make variable static and config dependent
x86/defconfigs: Remove useless UEVENT_HELPER_PATH
x86/amd_nb: Make hygon_nb_misc_ids static
x86/tsc: Move inline keyword to the beginning of function declarations
x86/io_delay: Define IO_DELAY macros in C instead of Kconfig
x86/io_delay: Break instead of fallthrough in switch statement
Pull x86 cache resource control update from Ingo Molnar:
"Two cleanup patches"
* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Cleanup cbm_ensure_valid()
x86/resctrl: Use _ASM_BX to avoid ifdeffery
Pull x86 asm updates from Ingo Molnar:
"Most of the changes relate to Peter Zijlstra's cleanup of ptregs
handling, in particular the i386 part is now much simplified and
standardized - no more partial ptregs stack frames via the esp/ss
oddity. This simplifies ftrace, kprobes, the unwinder, ptrace, kdump
and kgdb.
There's also a CR4 hardening enhancements by Kees Cook, to make the
generic platform functions such as native_write_cr4() less useful as
ROP gadgets that disable SMEP/SMAP. Also protect the WP bit of CR0
against similar attacks.
The rest is smaller cleanups/fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Add int3_emulate_call() selftest
x86/stackframe/32: Allow int3_emulate_push()
x86/stackframe/32: Provide consistent pt_regs
x86/stackframe, x86/ftrace: Add pt_regs frame annotations
x86/stackframe, x86/kprobes: Fix frame pointer annotations
x86/stackframe: Move ENCODE_FRAME_POINTER to asm/frame.h
x86/entry/32: Clean up return from interrupt preemption path
x86/asm: Pin sensitive CR0 bits
x86/asm: Pin sensitive CR4 bits
Documentation/x86: Fix path to entry_32.S
x86/asm: Remove unused TASK_TI_flags from asm-offsets.c
Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.
Need to take a lock for each generic receive to avoid race.
Fixes: c497176cb2 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull scheduler updates from Ingo Molnar:
- Remove the unused per rq load array and all its infrastructure, by
Dietmar Eggemann.
- Add utilization clamping support by Patrick Bellasi. This is a
refinement of the energy aware scheduling framework with support for
boosting of interactive and capping of background workloads: to make
sure critical GUI threads get maximum frequency ASAP, and to make
sure background processing doesn't unnecessarily move to cpufreq
governor to higher frequencies and less energy efficient CPU modes.
- Add the bare minimum of tracepoints required for LISA EAS regression
testing, by Qais Yousef - which allows automated testing of various
power management features, including energy aware scheduling.
- Restructure the former tsk_nr_cpus_allowed() facility that the -rt
kernel used to modify the scheduler's CPU affinity logic such as
migrate_disable() - introduce the task->cpus_ptr value instead of
taking the address of &task->cpus_allowed directly - by Sebastian
Andrzej Siewior.
- Misc optimizations, fixes, cleanups and small enhancements - see the
Git log for details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched/uclamp: Add uclamp support to energy_compute()
sched/uclamp: Add uclamp_util_with()
sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks
sched/uclamp: Set default clamps for RT tasks
sched/uclamp: Reset uclamp values on RESET_ON_FORK
sched/uclamp: Extend sched_setattr() to support utilization clamping
sched/core: Allow sched_setattr() to use the current policy
sched/uclamp: Add system default clamps
sched/uclamp: Enforce last task's UCLAMP_MAX
sched/uclamp: Add bucket local max tracking
sched/uclamp: Add CPU's clamp buckets refcounting
sched/fair: Rename weighted_cpuload() to cpu_runnable_load()
sched/debug: Export the newly added tracepoints
sched/debug: Add sched_overutilized tracepoint
sched/debug: Add new tracepoint to track PELT at se level
sched/debug: Add new tracepoints to track PELT at rq level
sched/debug: Add a new sched_trace_*() helper functions
sched/autogroup: Make autogroup_path() always available
sched/wait: Deduplicate code with do-while
sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
...
Stephen Suryaputra says:
====================
net: Multipath hashing on inner L3
This series extends commit 363887a2cd ("ipv4: Support multipath
hashing on inner IP pkts for GRE tunnel") to include support when the
outer L3 is IPv6 and to consider the case where the inner L3 is
different version from the outer L3, such as IPv6 tunneled by IPv4 GRE
or vice versa. It also includes kselftest scripts to test the use cases.
v2: Clarify the commit messages in the commits in this series to use the
term tunneled by IPv4 GRE or by IPv6 GRE so that it's clear which
one is the inner and which one is the outer (per David Miller).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftest scripts for multipath hashing on inner IP pkts when there
is a single GRE tunnel but there are multiple underlay routes to reach
the other end of the tunnel.
Four cases are covered in these scripts:
- IPv4 inner, IPv4 outer
- IPv6 inner, IPv4 outer
- IPv4 inner, IPv6 outer
- IPv6 inner, IPv6 outer
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
