ac14ef0f9f201e16e61d3be5b493e10acad957e7
454 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Kroah-Hartman
|
1b71a028a2 |
Merge 5.10.84 into android12-5.10-lts
Changes in 5.10.84 NFSv42: Fix pagecache invalidation after COPY/CLONE can: j1939: j1939_tp_cmd_recv(): check the dst address of TP.CM_BAM ovl: simplify file splice ovl: fix deadlock in splice write gfs2: release iopen glock early in evict gfs2: Fix length of holes reported at end-of-file powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory" drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY mac80211: do not access the IV when it was stripped net/smc: Transfer remaining wait queue entries during fallback atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_wait net: return correct error code platform/x86: thinkpad_acpi: Add support for dual fan control platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep s390/setup: avoid using memblock_enforce_memory_limit btrfs: check-integrity: fix a warning on write caching disabled disk thermal: core: Reset previous low and high trip during thermal zone init scsi: iscsi: Unblock session then wake up error handler drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again drm/amd/amdgpu: fix potential memleak ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() ipv6: check return value of ipv6_skip_exthdr net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() perf inject: Fix ARM SPE handling perf hist: Fix memory leak of a perf_hpp_fmt perf report: Fix memory leaks around perf_tip() net/smc: Avoid warning of possible recursive locking ACPI: Add stubs for wakeup handler functions vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit kprobes: Limit max data_size of the kretprobe instances rt2x00: do not mark device gone on EPROTO errors during start ipmi: Move remove_work to dedicated workqueue cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink() s390/pci: move pseudo-MMIO to prevent MIO overlap fget: check that the fd still exists after getting a ref to it sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl ipv6: fix memory leak in fib6_rule_suppress drm/amd/display: Allow DSC on supported MST branch devices KVM: Disallow user memslot with size that exceeds "unsigned long" KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST KVM: x86: Use a stable condition around all VT-d PI paths KVM: arm64: Avoid setting the upper 32 bits of TCR_EL2 and CPTR_EL2 to 1 KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg() tracing/histograms: String compares should not care about signed values wireguard: selftests: increase default dmesg log size wireguard: allowedips: add missing __rcu annotation to satisfy sparse wireguard: selftests: actually test for routing loops wireguard: selftests: rename DEBUG_PI_LIST to DEBUG_PLIST wireguard: device: reset peer src endpoint when netns exits wireguard: receive: use ring buffer for incoming handshakes wireguard: receive: drop handshakes if queue lock is contended wireguard: ratelimiter: use kvcalloc() instead of kvzalloc() i2c: stm32f7: flush TX FIFO upon transfer errors i2c: stm32f7: recover the bus on access timeout i2c: stm32f7: stop dma transfer in case of NACK i2c: cbus-gpio: set atomic transfer callback natsemi: xtensa: fix section mismatch warnings tcp: fix page frag corruption on page fault net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: mpls: Fix notifications when deleting a device siphash: use _unaligned version by default arm64: ftrace: add missing BTIs net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() selftests: net: Correct case name mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode ASoC: tegra: Fix wrong value type in ADMAIF ASoC: tegra: Fix wrong value type in I2S ASoC: tegra: Fix wrong value type in DMIC ASoC: tegra: Fix wrong value type in DSPK ASoC: tegra: Fix kcontrol put callback in ADMAIF ASoC: tegra: Fix kcontrol put callback in I2S ASoC: tegra: Fix kcontrol put callback in DMIC ASoC: tegra: Fix kcontrol put callback in DSPK ASoC: tegra: Fix kcontrol put callback in AHUB rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle() rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer() ALSA: intel-dsp-config: add quirk for CML devices based on ES8336 codec net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ is available net: marvell: mvpp2: Fix the computation of shared CPUs dpaa2-eth: destroy workqueue at the end of remove function net: annotate data-races on txq->xmit_lock_owner ipv4: convert fib_num_tclassid_users to atomic_t net/smc: fix wrong list_del in smc_lgr_cleanup_early net/rds: correct socket tunable error in rds_tcp_tune() net/smc: Keep smc_close_final rc during active close drm/msm/a6xx: Allocate enough space for GMU registers drm/msm: Do hw_init() before capturing GPU state atlantic: Increase delay for fw transactions atlatnic: enable Nbase-t speeds with base-t atlantic: Fix to display FW bundle version instead of FW mac version. atlantic: Add missing DIDs and fix 115c. Remove Half duplex mode speed capabilities. atlantic: Fix statistics logic for production hardware atlantic: Remove warn trace message. KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register KVM: VMX: Set failure code in prepare_vmcs02() x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword x86/entry: Use the correct fence macro after swapgs in kernel CR3 x86/xen: Add xenpv_restore_regs_and_return_to_usermode() sched/uclamp: Fix rq->uclamp_max not set on first enqueue x86/pv: Switch SWAPGS to ALTERNATIVE x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry() parisc: Fix KBUILD_IMAGE for self-extracting kernel parisc: Fix "make install" on newer debian releases vgacon: Propagate console boot parameters before calling `vc_resize' xhci: Fix commad ring abort, write all 64 bits to CRCR register. USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect x86/tsc: Add a timer to make sure TSC_adjust is always checked x86/tsc: Disable clocksource watchdog for TSC on qualified platorms x86/64/mm: Map all kernel memory into trampoline_pgd tty: serial: msm_serial: Deactivate RX DMA for polling support serial: pl011: Add ACPI SBSA UART match id serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 serial: core: fix transmit-buffer reset and memleak serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array serial: 8250_pci: rewrite pericom_do_set_divisor() serial: 8250: Fix RTS modem control while in rs485 mode iwlwifi: mvm: retry init flow if failed parisc: Mark cr16 CPU clocksource unstable on all SMP machines net/tls: Fix authentication failure in CCM mode ipmi: msghandler: Make symbol 'remove_work_wq' static Linux 5.10.84 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Iad592da28c6425dea7dca35b229d14c44edb412d |
||
|
Mario Limonciello
|
136cabf157 |
ACPI: Add stubs for wakeup handler functions
[ Upstream commit e9380df851878cee71df5a1c7611584421527f7e ] The commit |
||
|
Greg Kroah-Hartman
|
e92949726c |
Merge 5.10.28 into android12-5.10
Changes in 5.10.28 arm64: mm: correct the inside linear map range during hotplug check bpf: Fix fexit trampoline. virtiofs: Fail dax mount if device does not support it ext4: shrink race window in ext4_should_retry_alloc() ext4: fix bh ref count on error paths fs: nfsd: fix kconfig dependency warning for NFSD_V4 rpc: fix NULL dereference on kmalloc failure iomap: Fix negative assignment to unsigned sis->pages in iomap_swapfile_activate ASoC: rt1015: fix i2c communication error ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10 ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10 ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probe ASoC: es8316: Simplify adc_pga_gain_tlv table ASoC: soc-core: Prevent warning if no DMI table is present ASoC: cs42l42: Fix Bitclock polarity inversion ASoC: cs42l42: Fix channel width support ASoC: cs42l42: Fix mixer volume control ASoC: cs42l42: Always wait at least 3ms after reset NFSD: fix error handling in NFSv4.0 callbacks kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing vhost: Fix vhost_vq_reset() io_uring: fix ->flags races by linked timeouts scsi: st: Fix a use after free in st_open() scsi: qla2xxx: Fix broken #endif placement staging: comedi: cb_pcidas: fix request_irq() warn staging: comedi: cb_pcidas64: fix request_irq() warn ASoC: rt5659: Update MCLK rate in set_sysclk() ASoC: rt711: add snd_soc_component remove callback thermal/core: Add NULL pointer check before using cooling device stats locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini() nvmet-tcp: fix kmap leak when data digest in use io_uring: imply MSG_NOSIGNAL for send[msg]()/recv[msg]() calls static_call: Align static_call_is_init() patching condition ext4: do not iput inode under running transaction in ext4_rename() io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL net: mvpp2: fix interrupt mask/unmask skip condition flow_dissector: fix TTL and TOS dissection on IPv4 fragments can: dev: move driver related infrastructure into separate subdir net: introduce CAN specific pointer in the struct net_device can: tcan4x5x: fix max register value brcmfmac: clear EAP/association status bits on linkdown events ath11k: add ieee80211_unregister_hw to avoid kernel crash caused by NULL pointer rtw88: coex: 8821c: correct antenna switch function netdevsim: dev: Initialize FIB module after debugfs iwlwifi: pcie: don't disable interrupts for reg_lock ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr() net: ethernet: aquantia: Handle error cleanup of start on open appletalk: Fix skb allocation size in loopback case net: ipa: remove two unused register definitions net: ipa: fix register write command validation net: wan/lmc: unregister device when no matching device is found net: 9p: advance iov on empty read bpf: Remove MTU check in __bpf_skb_max_len ACPI: tables: x86: Reserve memory occupied by ACPI tables ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead() ALSA: usb-audio: Apply sample rate quirk to Logitech Connect ALSA: hda: Re-add dropped snd_poewr_change_state() calls ALSA: hda: Add missing sanity checks in PM prepare/complete callbacks ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook ALSA: hda/realtek: fix mute/micmute LEDs for HP 640 G8 xtensa: fix uaccess-related livelock in do_page_fault xtensa: move coprocessor_flush to the .text section KVM: SVM: load control fields from VMCB12 before checking them KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit PM: runtime: Fix race getting/putting suppliers at probe PM: runtime: Fix ordering in pm_runtime_get_suppliers() tracing: Fix stack trace event size s390/vdso: copy tod_steering_delta value to vdso_data page s390/vdso: fix tod_steering_delta type mm: fix race by making init_zero_pfn() early_initcall drm/amdkfd: dqm fence memory corruption drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings() drm/amdgpu: check alignment on CPU page for bo map reiserfs: update reiserfs_xattrs_initialized() condition drm/imx: fix memory leak when fails to init drm/tegra: dc: Restore coupling of display controllers drm/tegra: sor: Grab runtime PM reference across reset vfio/nvlink: Add missing SPAPR_TCE_IOMMU depends pinctrl: rockchip: fix restore error in resume extcon: Add stubs for extcon_register_notifier_all() functions extcon: Fix error handling in extcon_dev_register firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0 usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield video: hyperv_fb: Fix a double free in hvfb_probe firewire: nosy: Fix a use-after-free bug in nosy_ioctl() usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control() USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem usb: musb: Fix suspend with devices connected for a64 usb: xhci-mtk: fix broken streams issue on 0.96 xHCI cdc-acm: fix BREAK rx code path adding necessary calls USB: cdc-acm: untangle a circular dependency between callback and softint USB: cdc-acm: downgrade message to debug USB: cdc-acm: fix double free on probe failure USB: cdc-acm: fix use-after-free after probe failure usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. usb: dwc2: Prevent core suspend when port connection flag is 0 usb: dwc3: qcom: skip interconnect init for ACPI probe usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable soc: qcom-geni-se: Cleanup the code to remove proxy votes staging: rtl8192e: Fix incorrect source in memcpy() staging: rtl8192e: Change state information from u16 to u8 driver core: clear deferred probe reason on probe retry drivers: video: fbcon: fix NULL dereference in fbcon_cursor() riscv: evaluate put_user() arg before enabling user access Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing" bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG Linux 5.10.28 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Ifdbbeda8de3ee22a7aa3f5d3b10becf0aba1a124 |
||
|
Rafael J. Wysocki
|
cdd192a20b |
ACPI: tables: x86: Reserve memory occupied by ACPI tables
commit 1a1c130ab7575498eed5bcf7220037ae09cd1f8a upstream.
The following problem has been reported by George Kennedy:
Since commit
|
||
|
Greg Kroah-Hartman
|
3ccfc59f82 |
Merge 5.10.24 into android12-5.10-lts
Changes in 5.10.24
uapi: nfnetlink_cthelper.h: fix userspace compilation error
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc/pseries: Don't enforce MSI affinity with kdump
ethernet: alx: fix order of calls on resume
crypto: mips/poly1305 - enable for all MIPS processors
ath9k: fix transmitting to stations in dynamic SMPS mode
net: Fix gro aggregation for udp encaps with zero csum
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: l2tp: reduce log level of messages in receive path, add counter instead
can: skb: can_skb_set_owner(): fix ref counting if socket was closed before setting skb ownership
can: flexcan: assert FRZ bit in flexcan_chip_freeze()
can: flexcan: enable RX FIFO after FRZ/HALT valid
can: flexcan: invoke flexcan_chip_freeze() to enter freeze mode
can: tcan4x5x: tcan4x5x_init(): fix initialization - clear MRAM before entering Normal Mode
tcp: Fix sign comparison bug in getsockopt(TCP_ZEROCOPY_RECEIVE)
tcp: add sanity tests to TCP_QUEUE_SEQ
netfilter: nf_nat: undo erroneous tcp edemux lookup
netfilter: x_tables: gpf inside xt_find_revision()
net: always use icmp{,v6}_ndo_send from ndo_start_xmit
net: phy: fix save wrong speed and duplex problem if autoneg is on
selftests/bpf: Use the last page in test_snprintf_btf on s390
selftests/bpf: No need to drop the packet when there is no geneve opt
selftests/bpf: Mask bpf_csum_diff() return value to 16 bits in test_verifier
samples, bpf: Add missing munmap in xdpsock
libbpf: Clear map_info before each bpf_obj_get_info_by_fd
ibmvnic: Fix possibly uninitialized old_num_tx_queues variable warning.
ibmvnic: always store valid MAC address
mt76: dma: do not report truncated frames to mac80211
powerpc/603: Fix protection of user pages mapped with PROT_NONE
mount: fix mounting of detached mounts onto targets that reside on shared mounts
cifs: return proper error code in statfs(2)
Revert "mm, slub: consider rest of partial list if acquire_slab() fails"
docs: networking: drop special stable handling
net: dsa: tag_rtl4_a: fix egress tags
sh_eth: fix TRSCER mask for SH771x
net: enetc: don't overwrite the RSS indirection table when initializing
net: enetc: take the MDIO lock only once per NAPI poll cycle
net: enetc: fix incorrect TPID when receiving 802.1ad tagged packets
net: enetc: don't disable VLAN filtering in IFF_PROMISC mode
net: enetc: force the RGMII speed and duplex instead of operating in inband mode
net: enetc: remove bogus write to SIRXIDR from enetc_setup_rxbdr
net: enetc: keep RX ring consumer index in sync with hardware
net: ethernet: mtk-star-emac: fix wrong unmap in RX handling
net/mlx4_en: update moderation when config reset
net: stmmac: fix incorrect DMA channel intr enable setting of EQoS v4.10
nexthop: Do not flush blackhole nexthops when loopback goes down
net: sched: avoid duplicates in classes dump
net: mscc: ocelot: properly reject destination IP keys in VCAP IS1
net: dsa: sja1105: fix SGMII PCS being forced to SPEED_UNKNOWN instead of SPEED_10
net: usb: qmi_wwan: allow qmimux add/del with master up
netdevsim: init u64 stats for 32bit hardware
cipso,calipso: resolve a number of problems with the DOI refcounts
net: stmmac: Fix VLAN filter delete timeout issue in Intel mGBE SGMII
stmmac: intel: Fixes clock registration error seen for multiple interfaces
net: lapbether: Remove netif_start_queue / netif_stop_queue
net: davicom: Fix regulator not turned off on failed probe
net: davicom: Fix regulator not turned off on driver removal
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: qrtr: fix error return code of qrtr_sendmsg()
s390/qeth: fix memory leak after failed TX Buffer allocation
r8169: fix r8168fp_adjust_ocp_cmd function
ixgbe: fail to create xfrm offload of IPsec tunnel mode SA
tools/resolve_btfids: Fix build error with older host toolchains
perf build: Fix ccache usage in $(CC) when generating arch errno table
net: stmmac: stop each tx channel independently
net: stmmac: fix watchdog timeout during suspend/resume stress test
net: stmmac: fix wrongly set buffer2 valid when sph unsupport
ethtool: fix the check logic of at least one channel for RX/TX
net: phy: make mdio_bus_phy_suspend/resume as __maybe_unused
selftests: forwarding: Fix race condition in mirror installation
mlxsw: spectrum_ethtool: Add an external speed to PTYS register
perf traceevent: Ensure read cmdlines are null terminated.
perf report: Fix -F for branch & mem modes
net: hns3: fix query vlan mask value error for flow director
net: hns3: fix bug when calculating the TCAM table info
s390/cio: return -EFAULT if copy_to_user() fails again
bnxt_en: reliably allocate IRQ table on reset to avoid crash
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
gpiolib: acpi: Allow to find GpioInt() resource by name and index
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
gpio: fix gpio-device list corruption
drm/compat: Clear bounce structures
drm/amd/display: Add a backlight module option
drm/amdgpu/display: use GFP_ATOMIC in dcn21_validate_bandwidth_fp()
drm/amd/display: Fix nested FPU context in dcn21_validate_bandwidth()
drm/amd/pm: bug fix for pcie dpm
drm/amdgpu/display: simplify backlight setting
drm/amdgpu/display: don't assert in set backlight function
drm/amdgpu/display: handle aux backlight in backlight_get_brightness
drm/shmem-helper: Check for purged buffers in fault handler
drm/shmem-helper: Don't remove the offset in vm_area_struct pgoff
drm: Use USB controller's DMA mask when importing dmabufs
drm: meson_drv add shutdown function
drm/shmem-helpers: vunmap: Don't put pages for dma-buf
drm/i915: Wedge the GPU if command parser setup fails
s390/cio: return -EFAULT if copy_to_user() fails
s390/crypto: return -EFAULT if copy_to_user() fails
qxl: Fix uninitialised struct field head.surface_id
sh_eth: fix TRSCER mask for R7S9210
media: usbtv: Fix deadlock on suspend
media: rkisp1: params: fix wrong bits settings
media: v4l: vsp1: Fix uif null pointer access
media: v4l: vsp1: Fix bru null pointer access
media: rc: compile rc-cec.c into rc-core
cifs: fix credit accounting for extra channel
net: hns3: fix error mask definition of flow director
s390/qeth: don't replace a fully completed async TX buffer
s390/qeth: remove QETH_QDIO_BUF_HANDLED_DELAYED state
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix notification for pending buffers during teardown
net: dsa: implement a central TX reallocation procedure
net: dsa: tag_ksz: don't allocate additional memory for padding/tagging
net: dsa: trailer: don't allocate additional memory for padding/tagging
net: dsa: tag_qca: let DSA core deal with TX reallocation
net: dsa: tag_ocelot: let DSA core deal with TX reallocation
net: dsa: tag_mtk: let DSA core deal with TX reallocation
net: dsa: tag_lan9303: let DSA core deal with TX reallocation
net: dsa: tag_edsa: let DSA core deal with TX reallocation
net: dsa: tag_brcm: let DSA core deal with TX reallocation
net: dsa: tag_dsa: let DSA core deal with TX reallocation
net: dsa: tag_gswip: let DSA core deal with TX reallocation
net: dsa: tag_ar9331: let DSA core deal with TX reallocation
net: dsa: tag_mtk: fix 802.1ad VLAN egress
enetc: Fix unused var build warning for CONFIG_OF
net: enetc: initialize RFS/RSS memories for unused ports too
ath11k: peer delete synchronization with firmware
ath11k: start vdev if a bss peer is already created
ath11k: fix AP mode for QCA6390
i2c: rcar: faster irq code to minimize HW race condition
i2c: rcar: optimize cacheline to minimize HW race condition
scsi: ufs: WB is only available on LUN #0 to #7
udf: fix silent AED tagLocation corruption
iommu/vt-d: Clear PRQ overflow only when PRQ is empty
mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'
mmc: mediatek: fix race condition between msdc_request_timeout and irq
mmc: sdhci-iproc: Add ACPI bindings for the RPi
Platform: OLPC: Fix probe error handling
powerpc/pci: Add ppc_md.discover_phbs()
spi: stm32: make spurious and overrun interrupts visible
powerpc: improve handling of unrecoverable system reset
powerpc/perf: Record counter overflow always if SAMPLE_IP is unset
HID: logitech-dj: add support for the new lightspeed connection iteration
powerpc/64: Fix stack trace not displaying final frame
iommu/amd: Fix performance counter initialization
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
sparc32: Limit memblock allocation to low memory
sparc64: Use arch_validate_flags() to validate ADI flag
Input: applespi - don't wait for responses to commands indefinitely.
PCI: xgene-msi: Fix race in installing chained irq handler
PCI: mediatek: Add missing of_node_put() to fix reference leak
drivers/base: build kunit tests without structleak plugin
PCI/LINK: Remove bandwidth notification
ext4: don't try to processed freed blocks until mballoc is initialized
kbuild: clamp SUBLEVEL to 255
PCI: Fix pci_register_io_range() memory leak
i40e: Fix memory leak in i40e_probe
kasan: fix memory corruption in kasan_bitops_tags test
s390/smp: __smp_rescan_cpus() - move cpumask away from stack
drivers/base/memory: don't store phys_device in memory blocks
sysctl.c: fix underflow value setting risk in vm_table
scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
scsi: target: core: Add cmd length set before cmd complete
scsi: target: core: Prevent underflow for service actions
clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
mmc: sdhci: Update firmware interface API
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: assembler: introduce adr_l, ldr_l and str_l macros
ARM: efistub: replace adrl pseudo-op with adr_l macro invocation
ALSA: usb: Add Plantronics C320-M USB ctrl msg delay quirk
ALSA: hda/hdmi: Cancel pending works before suspend
ALSA: hda/conexant: Add quirk for mute LED control on HP ZBook G5
ALSA: hda/ca0132: Add Sound BlasterX AE-5 Plus support
ALSA: hda: Drop the BATCH workaround for AMD controllers
ALSA: hda: Flush pending unsolicited events before suspend
ALSA: hda: Avoid spurious unsol event handling during S3/S4
ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound bar
ALSA: usb-audio: Apply the control quirk to Plantronics headsets
ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()
ALSA: usb-audio: fix NULL ptr dereference in usb_audio_probe
ALSA: usb-audio: fix use after free in usb_audio_disconnect
Revert 95ebabde382c ("capabilities: Don't allow writing ambiguous v3 file capabilities")
block: Discard page cache of zone reset target range
block: Try to handle busy underlying device on discard
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: perf: Fix 64-bit event counter read truncation
s390/dasd: fix hanging DASD driver unbind
s390/dasd: fix hanging IO request during DASD driver unbind
software node: Fix node registration
xen/events: reset affinity of 2-level event when tearing it down
mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variants
mmc: core: Fix partition switch time for eMMC
mmc: cqhci: Fix random crash when remove mmc module/card
cifs: do not send close in compound create+close requests
Goodix Fingerprint device is not a modem
USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
USB: gadget: u_ether: Fix a configfs return code
usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
usb: gadget: f_uac1: stop playback on function disable
usb: dwc3: qcom: Add missing DWC3 OF node refcount decrement
usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot
usb: dwc3: qcom: add ACPI device id for sc8180x
usb: dwc3: qcom: Honor wakeup enabled/disabled state
USB: usblp: fix a hang in poll() if disconnected
usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
usb: xhci: do not perform Soft Retry for some xHCI hosts
xhci: Improve detection of device initiated wake signal.
usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressing
xhci: Fix repeated xhci wake after suspend due to uncleared internal wake state
USB: serial: io_edgeport: fix memory leak in edge_startup
USB: serial: ch341: add new Product ID
USB: serial: cp210x: add ID for Acuity Brands nLight Air Adapter
USB: serial: cp210x: add some more GE USB IDs
usbip: fix stub_dev to check for stream socket
usbip: fix vhci_hcd to check for stream socket
usbip: fix vudc to check for stream socket
usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
usbip: fix vhci_hcd attach_store() races leading to gpf
usbip: fix vudc usbip_sockfd_store races leading to gpf
Revert "serial: max310x: rework RX interrupt handling"
misc/pvpanic: Export module FDT device table
misc: fastrpc: restrict user apps from sending kernel RPC messages
staging: rtl8192u: fix ->ssid overflow in r8192_wx_set_scan()
staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan()
staging: rtl8712: unterminated string leads to read overflow
staging: rtl8188eu: fix potential memory corruption in rtw_check_beacon_data()
staging: ks7010: prevent buffer overflow in ks_wlan_set_scan()
staging: rtl8712: Fix possible buffer overflow in r8712_sitesurvey_cmd
staging: rtl8192e: Fix possible buffer overflow in _rtl92e_wx_set_scan
staging: comedi: addi_apci_1032: Fix endian problem for COS sample
staging: comedi: addi_apci_1500: Fix endian problem for command sample
staging: comedi: adv_pci1710: Fix endian problem for AI command data
staging: comedi: das6402: Fix endian problem for AI command data
staging: comedi: das800: Fix endian problem for AI command data
staging: comedi: dmm32at: Fix endian problem for AI command data
staging: comedi: me4000: Fix endian problem for AI command data
staging: comedi: pcl711: Fix endian problem for AI command data
staging: comedi: pcl818: Fix endian problem for AI command data
sh_eth: fix TRSCER mask for R7S72100
cpufreq: qcom-hw: fix dereferencing freed memory 'data'
cpufreq: qcom-hw: Fix return value check in qcom_cpufreq_hw_cpu_init()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
SUNRPC: Set memalloc_nofs_save() for sync tasks
NFS: Don't revalidate the directory permissions on a lookup failure
NFS: Don't gratuitously clear the inode cache when lookup failed
NFSv4.2: fix return value of _nfs4_get_security_label()
block: rsxx: fix error return code of rsxx_pci_probe()
nvme-fc: fix racing controller reset and create association
configfs: fix a use-after-free in __configfs_open_file
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
perf/core: Flush PMU internal buffers for per-CPU events
perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()
powerpc/64s/exception: Clean up a missed SRR specifier
seqlock,lockdep: Fix seqcount_latch_init()
stop_machine: mark helpers __always_inline
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
zram: fix return value on writeback_store
linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
sched/membarrier: fix missing local execution of ipi_sync_rq_state()
efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table
powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
powerpc: Fix inverted SET_FULL_REGS bitop
powerpc: Fix missing declaration of [en/dis]able_kernel_vsx()
binfmt_misc: fix possible deadlock in bm_register_write
x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
x86/sev-es: Introduce ip_within_syscall_gap() helper
x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
x86/entry: Move nmi entry/exit into common code
x86/sev-es: Correctly track IRQ states in runtime #VC handler
x86/sev-es: Use __copy_from_user_inatomic()
x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
KVM: arm64: Fix range alignment when walking page tables
KVM: arm64: Avoid corrupting vCPU context register in guest exit
KVM: arm64: nvhe: Save the SPE context early
KVM: arm64: Reject VM creation when the default IPA size is unsupported
KVM: arm64: Fix exclusive limit for IPA size
mm/userfaultfd: fix memory corruption due to writeprotect
mm/madvise: replace ptrace attach requirement for process_madvise
KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
mm/page_alloc.c: refactor initialization of struct page for holes in memory layout
xen/events: don't unmask an event channel when an eoi is pending
xen/events: avoid handling the same event on two cpus at the same time
KVM: arm64: Fix nVHE hyp panic host context restore
RDMA/umem: Use ib_dma_max_seg_size instead of dma_get_max_seg_size
Linux 5.10.24
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ie53a3c1963066a18d41357b6be41cff00690bd40
|
||
|
Andy Shevchenko
|
f60ffab258 |
gpiolib: acpi: Allow to find GpioInt() resource by name and index
commit 809390219fb9c2421239afe5c9eb862d73978ba0 upstream. Currently only search by index is supported. However, in some cases we might need to pass the quirks to the acpi_dev_gpio_irq_get(). For this, split out acpi_dev_gpio_irq_get_by() and replace acpi_dev_gpio_irq_get() by calling above with NULL for name parameter. Fixes: |
||
|
Saravana Kannan
|
4e1a8c589d |
UPSTREAM: ACPI: Use fwnode_init() to set up fwnode
Commit 01bb86b380a3 ("driver core: Add fwnode_init()") was supposed to
fix up all instances of fwnode creation to use fwnode_init(). But looks
like this instance was missed. This causes a NULL pointer dereference
during device_add() [1]. So, fix it.
[ 60.792324][ T1] Call trace:
[ 60.795495][ T1] device_add+0xf60/0x16b0
__fw_devlink_link_to_consumers at drivers/base/core.c:1583
(inlined by) fw_devlink_link_device at drivers/base/core.c:1726
(inlined by) device_add at drivers/base/core.c:3088
[ 60.799813][ T1] platform_device_add+0x274/0x628
[ 60.804833][ T1] acpi_iort_init+0x9d8/0xc50
[ 60.809415][ T1] acpi_init+0x45c/0x4e8
[ 60.813556][ T1] do_one_initcall+0x170/0xb70
[ 60.818224][ T1] kernel_init_freeable+0x6a8/0x734
[ 60.823332][ T1] kernel_init+0x18/0x12c
[ 60.827566][ T1] ret_from_fork+0x10/0x1c
[ 60.838756][ T1] ---[ end trace fa5c8ce17a226d83 ]---
[1] - https://lore.kernel.org/linux-arm-kernel/02e7047071f0b54b046ac472adeeb3fafabc643c.camel@redhat.com/
Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()")
Reported-by: Qian Cai <qcai@redhat.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201211202629.2164655-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 2ab695aa8eb8f3226f68a2b91fc6103b56fcb57d)
Bug: 178143855
Bug: 169667932
Change-Id: I98eab68e67a7a8fb18875ee972ed9e3867363ec2
|
||
|
Shawn Guo
|
45f7e133f9 |
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
[ Upstream commit ee61cfd955a64a58ed35cbcfc54068fcbd486945 ] It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so that caller doesn't have to deal with !CONFIG_ACPI build issue. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Joe Perches
|
33def8498f |
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
cf1d2b44f6 |
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
||
|
Dan Williams
|
3b0d31011d |
x86/numa: add 'nohmat' option
Disable parsing of the HMAT for debug, to workaround broken platform instances, or cases where it is otherwise not wanted. [rdunlap@infradead.org: fix build when CONFIG_ACPI is not set] Link: https://lkml.kernel.org/r/70e5ee34-9809-a997-7b49-499e4be61307@infradead.org Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Link: https://lkml.kernel.org/r/159643095540.4062302.732962081968036212.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Rafael J. Wysocki
|
5d2a3ca813 |
Merge branch 'acpi-misc'
* acpi-misc: ACPI: Make acpi_evaluate_dsm() prototype consistent ACPI: wakeup: Remove dead ACPICA debug code ACPI: video: Remove leftover ACPICA debug code ACPI: tiny-power-button: Remove dead ACPICA debug code ACPI: processor: Remove dead ACPICA debug code ACPI: proc: Remove dead ACPICA debug code ACPI: PCI: Remove unused ACPICA debug code ACPI: event: Remove leftover ACPICA debug code ACPI: dock: Remove dead ACPICA debug code ACPI: debugfs: Remove dead ACPICA debug code ACPI: custom_method: Remove dead ACPICA debug code ACPI: container: Remove leftover ACPICA debug functionality ACPI: platform: Remove ACPI_MODULE_NAME() ACPI: memhotplug: Remove leftover ACPICA debug functionality ACPI: LPSS: Remove ACPI_MODULE_NAME() ACPI: cmos_rtc: Remove leftover ACPI_MODULE_NAME() ACPI: Remove three unused inline functions |
||
|
Rafael J. Wysocki
|
e4174ff78b |
Merge branch 'acpi-numa'
* acpi-numa: docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ACPI: Support Generic Initiator only domains ACPI / NUMA: Add stub function for pxm_to_node() irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory ACPI: Remove side effect of partly creating a node in acpi_get_node() ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node() ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node() ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT ACPI: Add out of bounds and numa_off protections to pxm_to_node() |
||
|
John Garry
|
1e0cb59d5f |
ACPI: Make acpi_evaluate_dsm() prototype consistent
When compiling a driver which includes both include/linux/acpi.h and
include/acpi/acpi_bus.h for when CONFIG_ACPI=n for i386, I get this:
/include/acpi/acpi_bus.h:53:20: error: conflicting types for ‘acpi_evaluate_dsm’
union acpi_object *acpi_evaluate_dsm(acpi_handle handle, const guid_t *guid,
^~~~~~~~~~~~~~~~~
In file included from drivers/scsi/hisi_sas/hisi_sas.h:10:0,
from drivers/scsi/hisi_sas/hisi_sas_main.c:7:
./include/linux/acpi.h:866:34: note: previous definition of ‘acpi_evaluate_dsm’ was here
static inline union acpi_object *acpi_evaluate_dsm(acpi_handle handle,
^~~~~~~~~~~~~~~~~
Fix by making prototype in include/linux/acpi.h consistent.
Signed-off-by: John Garry <john.garry@huawei.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Jonathan Cameron
|
01aabca2fd |
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
Until we tell ACPI that we support generic initiators, it will have to operate in fall back domain mode and all _PXM entries should be on existing non GI domains. This patch sets the relevant OSC bit to make that happen. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ard Biesheuvel
|
a509a66a9d |
arm64: permit ACPI core to map kernel memory used for table overrides
Jonathan reports that the strict policy for memory mapped by the ACPI core breaks the use case of passing ACPI table overrides via initramfs. This is due to the fact that the memory type used for loading the initramfs in memory is not recognized as a memory type that is typically used by firmware to pass firmware tables. Since the purpose of the strict policy is to ensure that no AML or other ACPI code can manipulate any memory that is used by the kernel to keep its internal state or the state of user tasks, we can relax the permission check, and allow mappings of memory that is reserved and marked as NOMAP via memblock, and therefore not covered by the linear mapping to begin with. Fixes: |
||
|
YueHaibing
|
749626fa09 |
ACPI: Remove three unused inline functions
There is no callers in tree. Signed-off-by: YueHaibing <yuehaibing@huawei.com> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jonathan Cameron
|
4eb3723f18 |
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
As this function is no longer allowed to create new mappings let us rename it to reflect this. Note all nodes should already exist before any of the users of this function are called. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jonathan Cameron
|
fe205d984e |
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
While this function will only return an online node, it can have the side effect of partially creating a new node. The existing comments suggest this is intentional, but the usecases of this function are related to NFIT and HMAT parsing, neither of which should be able to define new nodes. One route by which the existing behaviour would cause a crash is to have a _PXM entry in ACPI DSDT attempt to place a device within this partly created proximity domain. A subsequent call to devm_kzalloc() or similar would result in an attempt to allocate memory on a node for which zone lists have not been set up and a NULL pointer dereference. Prevent such cases by switching to pxm_to_node() within acpi_map_pxm_to_online_node() which cannot cause a new node to be partly created. If one would previously have been created we now return NO_NUMA_NODE. Documentation updated to reflect this change. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
f8b036a7fc |
Merge tag 'irq-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The usual boring updates from the interrupt subsystem:
- Infrastructure to allow building irqchip drivers as modules
- Consolidation of irqchip ACPI probing
- Removal of the EOI-preflow interrupt handler which was required for
SPARC support and became obsolete after SPARC was converted to use
sparse interrupts.
- Cleanups, fixes and improvements all over the place"
* tag 'irq-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/loongson-pch-pic: Fix the misused irq flow handler
irqchip/loongson-htvec: Support 8 groups of HT vectors
irqchip/loongson-liointc: Fix misuse of gc->mask_cache
dt-bindings: interrupt-controller: Update Loongson HTVEC description
irqchip/imx-intmux: Fix irqdata regs save in imx_intmux_runtime_suspend()
irqchip/imx-intmux: Implement intmux runtime power management
irqchip/gic-v4.1: Use GFP_ATOMIC flag in allocate_vpe_l1_table()
irqchip: Fix IRQCHIP_PLATFORM_DRIVER_* compilation by including module.h
irqchip/stm32-exti: Map direct event to irq parent
irqchip/mtk-cirq: Convert to a platform driver
irqchip/mtk-sysirq: Convert to a platform driver
irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros
irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros
irqchip: irq-bcm2836.h: drop a duplicated word
irqchip/gic-v4.1: Ensure accessing the correct RD when writing INVALLR
irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map
irqchip/gic-v3: Remove unused register definition
irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module
genirq: Export irq_chip_retrigger_hierarchy and irq_chip_set_vcpu_affinity_parent
irqdomain: Export irq_domain_update_bus_token
...
|
||
|
Lorenzo Pieralisi
|
b8e069a2a8 |
ACPI/IORT: Add an input ID to acpi_dma_configure()
Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Oscar Carter
|
8ebf642f3d |
drivers/acpi: Remove function cast
Remove the function cast in the ACPI_DECLARE_PROBE_ENTRY macro to ensure that the functions passed as a last parameter to this macro have the right prototype. This is an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200530143430.5203-4-oscar.carter@gmx.com |
||
|
Oscar Carter
|
89778093d3 |
drivers/acpi: Add new macro ACPI_DECLARE_SUBTABLE_PROBE_ENTRY
In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, there are the need to remove all the function callback casts. To do this, create a new macro called ACPI_DECLARE_SUBTABLE_PROBE_ENTRY to initialize the acpi_probe_entry struct using the probe_subtbl field instead of the probe_table field. This is a previous work to be able to modify the IRQCHIP_ACPI_DECLARE macro to use this new defined macro. Even though these two commented fields are part of a union, this is necessary to avoid function cast mismatches. That is, due to the IRQCHIP_ACPI_DECLARE invocations use as last parameter a function with the protoype "int (*func)(struct acpi_subtable_header *, const unsigned long)" it's necessary that this macro initialize the probe_subtbl field of the acpi_probe_entry struct and not the probe_table field. Co-developed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200530143430.5203-2-oscar.carter@gmx.com |
||
|
Linus Torvalds
|
9b06860d7c |
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
|
||
|
Linus Torvalds
|
ef05db16bb |
Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Additional power management updates.
These fix a corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source, add a kernel
command line option to set pm_debug_messages via the kernel command
line, add a document desctibing system-wide suspend and resume code
flows, modify cpufreq Kconfig to choose schedutil as the preferred
governor by default in a couple of cases and do some assorted
cleanups.
Specifics:
- Fix corner-case suspend-to-idle wakeup issue on systems where the
ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui)"
* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
ACPI: PM: Add acpi_[un]register_wakeup_handler()
Documentation: PM: sleep: Document system-wide suspend code flows
cpufreq: Select schedutil when using big.LITTLE
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
cpufreq: intel_pstate: Select schedutil as the default governor
|
||
|
Hans de Goede
|
ddfd9dcf27 |
ACPI: PM: Add acpi_[un]register_wakeup_handler()
Since commit |
||
|
Kuppuswamy Sathyanarayanan
|
ac1c8e35a3 |
PCI/DPC: Add Error Disconnect Recover (EDR) support
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to
notify OSPM that a device has been disconnected due to an error condition
(ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices
via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler
should invalidate software state associated with disconnected devices and
may attempt to recover them. OSPM communicates the status of recovery to
the firmware via _OST (sec 6.3.5.2).
For PCIe, firmware may use Downstream Port Containment (DPC) to support
EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control
of DPC, OSPM may read/write DPC control and status registers during the EDR
notification processing window, i.e., from the time it receives an EDR
notification until it clears the DPC Trigger Status.
Note that per [1], sec 4.5.1 and 4.5.2.4,
1. If the OS supports EDR, it should advertise that to firmware by
setting OSC_PCI_EDR_SUPPORT in _OSC Support.
2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request
control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in
_OSC Support.
Add an EDR notify handler to attempt recovery.
[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
[bhelgaas: squash add/enable patches into one]
Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
|
||
|
Dan Williams
|
b2ca916ce3 |
ACPI: NUMA: Up-level "map to online node" functionality
The acpi_map_pxm_to_online_node() helper is used to find the closest online node to a given proximity domain. This is used to map devices in a proximity domain with no online memory or cpus to the closest online node and populate a device's 'numa_node' property. The numa_node property allows applications to be migrated "close" to a resource. In preparation for providing a generic facility to optionally map an address range to its closest online node, or the node the range would represent were it to be onlined (target_node), up-level the core of acpi_map_pxm_to_online_node() to a generic mm/numa helper. Cc: Michal Hocko <mhocko@suse.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/158188324802.894464.13128795207831894206.stgit@dwillia2-desk3.amr.corp.intel.com |
||
|
Rafael J. Wysocki
|
77fb4e0a55 |
ACPI: processor: Export acpi_processor_evaluate_cst()
The intel_idle driver will be modified to use ACPI _CST subsequently and it will need to call acpi_processor_evaluate_cst(), so move that function to acpi_processor.c so that it is always present (which is required by intel_idle) and export it to modules to allow the ACPI processor driver (which is modular) to call it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
bc94638886 |
ACPI: processor: Export function to claim _CST control
The intel_idle driver will be modified to use ACPI _CST subsequently and it will need to notify the platform firmware of that if acpi_gbl_FADT.cst_control is set, so add a routine for this purpose, acpi_processor_claim_cst_control(), to acpi_processor.c (so that it is always present which is required by intel_idle) and export it to allow the ACPI processor driver (which is modular) to call it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Andy Shevchenko
|
35009c8074 |
ACPI / utils: Introduce acpi_dev_hid_uid_match() helper
There are users outside of ACPI realm which reimplementing the comparator function to check if the given device matches to given HID and UID. For better utilization, introduce a helper for everyone to use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
aefcf2f4b5 |
Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit
|
||
|
Linus Torvalds
|
77dcfe2b9e |
Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a rework of the main suspend-to-idle code flow (related
to the handling of spurious wakeups), a switch over of several users
of cpufreq notifiers to QoS-based limits, a new devfreq driver for
Tegra20, a new cpuidle driver and governor for virtualized guests, an
extension of the wakeup sources framework to expose wakeup sources as
device objects in sysfs, and more.
Specifics:
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching governor
for virtualized guests wanting to do guest-side polling in the idle
loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel
Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling typos
in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski)"
* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
cpuidle-haltpoll: do not set an owner to allow modunload
cpuidle-haltpoll: return -ENODEV on modinit failure
cpuidle-haltpoll: set haltpoll as preferred governor
cpuidle: allow governor switch on cpuidle_register_driver()
PM: runtime: Documentation: add runtime_status ABI document
pm-graph: make setVal unbuffered again for python2 and python3
powercap: idle_inject: Use higher resolution for idle injection
cpuidle: play_idle: Increase the resolution to usec
cpuidle-haltpoll: vcpu hotplug support
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
...
|
||
|
Linus Torvalds
|
e77fafe9af |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Although there isn't tonnes of code in terms of line count, there are
a fair few headline features which I've noted both in the tag and also
in the merge commits when I pulled everything together.
The part I'm most pleased with is that we had 35 contributors this
time around, which feels like a big jump from the usual small group of
core arm64 arch developers. Hopefully they all enjoyed it so much that
they'll continue to contribute, but we'll see.
It's probably worth highlighting that we've pulled in a branch from
the risc-v folks which moves our CPU topology code out to where it can
be shared with others.
Summary:
- 52-bit virtual addressing in the kernel
- New ABI to allow tagged user pointers to be dereferenced by
syscalls
- Early RNG seeding by the bootloader
- Improve robustness of SMP boot
- Fix TLB invalidation in light of recent architectural
clarifications
- Support for i.MX8 DDR PMU
- Remove direct LSE instruction patching in favour of static keys
- Function error injection using kprobes
- Support for the PPTT "thread" flag introduced by ACPI 6.3
- Move PSCI idle code into proper cpuidle driver
- Relaxation of implicit I/O memory barriers
- Build with RELR relocations when toolchain supports them
- Numerous cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits)
arm64: remove __iounmap
arm64: atomics: Use K constraint when toolchain appears to support it
arm64: atomics: Undefine internal macros after use
arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
arm64: asm: Kill 'asm/atomic_arch.h'
arm64: lse: Remove unused 'alt_lse' assembly macro
arm64: atomics: Remove atomic_ll_sc compilation unit
arm64: avoid using hard-coded registers for LSE atomics
arm64: atomics: avoid out-of-line ll/sc atomics
arm64: Use correct ll/sc atomic constraints
jump_label: Don't warn on __exit jump entries
docs/perf: Add documentation for the i.MX8 DDR PMU
perf/imx_ddr: Add support for AXI ID filtering
arm64: kpti: ensure patched kernel text is fetched from PoU
arm64: fix fixmap copy for 16K pages and 48-bit VA
perf/smmuv3: Validate groups for global filtering
perf/smmuv3: Validate group size
arm64: Relax Documentation/arm64/tagged-pointers.rst
arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
arm64: mm: Ignore spurious translation faults taken from the kernel
...
|
||
|
Josh Boyer
|
41fa1ee9c6 |
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
This option allows userspace to pass the RSDP address to the kernel, which makes it possible for a user to modify the workings of hardware. Reject the option when the kernel is locked down. This requires some reworking of the existing RSDP command line logic, since the early boot code also makes use of a command-line passed RSDP when locating the SRAT table before the lockdown code has been initialised. This is achieved by separating the command line RSDP path in the early boot code from the generic RSDP path, and then copying the command line RSDP into boot params in the kernel proper if lockdown is not enabled. If lockdown is enabled and an RSDP is provided on the command line, this will only be used when parsing SRAT (which shouldn't permit kernel code execution) and will be ignored in the rest of the kernel. (Modified by Matthew Garrett in order to handle the early boot RSDP environment) Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> cc: Dave Young <dyoung@redhat.com> cc: linux-acpi@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org> |
||
|
Jeremy Linton
|
bbd1b70639 |
ACPI/PPTT: Add support for ACPI 6.3 thread flag
ACPI 6.3 adds a flag to the CPU node to indicate whether the given PE is a thread. Add a function to return that information for a given linux logical CPU. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Robert Richter <rrichter@marvell.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Andy Shevchenko
|
2838bf941b |
gpiolib-acpi: Move acpi_dev_add_driver_gpios() et al to consumer.h
The API, which belongs to GPIO library, is foreign to ACPI headers. Earlier we moved out I²C out of the latter, and now it's time for acpi_dev_add_driver_gpios() et al. For time being the acpi_gpio_get_irq_resource() and acpi_dev_gpio_irq_get() are left untouched as they need more thought about. Note, it requires uninline acpi_dev_remove_driver_gpios() to keep purity of consumer.h. Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Cc: Jie Yang <yang.jie@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org (moderated list:INTEL ASoC DRIVERS) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190730104337.21235-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Rafael J. Wysocki
|
10a08fd65e |
ACPI: PM: Set up EC GPE for system wakeup from drivers that need it
The EC GPE needs to be set up for system wakeup only if there is a driver depending on it, either intel-hid or intel-vbtn, bound to a button device that is expected to wake up the system from sleep (such as the power button on some Dell systems, like the XPS13 9360). It doesn't need to be set up for waking up the system from sleep in any other cases and whether or not it is expected to wake up the system from sleep doesn't depend on whether or not the LPS0 device is present in the ACPI namespace. For this reason, rearrange the ACPI suspend-to-idle code to make the drivers depending on the EC GPE wakeup take care of setting it up and decouple that from the LPS0 device handling. While at it, make intel-hid and intel-vbtn prepare for system wakeup only if they are allowed to wake up the system from sleep by user space (via sysfs). [Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask() are there to prevent the EC GPE from being disabled by the acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on systems with either intel-hid or intel-vbtn this change doesn't affect any interactions with the hardware or platform firmware.] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> |
||
|
Linus Torvalds
|
4b09ddbcd1 |
Merge tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These get rid of two clang warnings, add a new quirk mechanism to the
ACPI backlight driver (and apply it to one machine) and update the
table load object initialization in ACPICA (this is a replacement for
a previously reverted ACPICA commit).
Specifics:
- Make ACPI table loading work more consistently regardless of the
exact mechanism used for loading a table (Erik Schmauss).
- Get rid of two clang warnings (Arnd Bergmann).
- Add new quirk mechanism to the ACPI backlight driver and use it to
add a quirk for PB Easynote MZ35 (Hans de Goede)"
* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
ACPI: fix false-positive -Wuninitialized warning
ACPI: blacklist: fix clang warning for unused DMI table
ACPICA: Update table load object initialization
|
||
|
Arnd Bergmann
|
dfd6f9ad36 |
ACPI: fix false-positive -Wuninitialized warning
clang gets confused by an uninitialized variable in what looks
to it like a never executed code path:
arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized]
polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
^~~~~~~~
arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning
int rc, irq, trigger, polarity;
^
= 0
arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized]
trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
^~~~~~~
arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning
int rc, irq, trigger, polarity;
^
= 0
This is unfortunately a design decision in clang and won't be fixed.
Changing the acpi_get_override_irq() macro to an inline function
reliably avoids the issue.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Linus Torvalds
|
5516745311 |
Merge tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
"Gathered a bunch of x86 platform driver changes. It's rather big,
since includes two big refactors and completely new driver:
- ASUS WMI driver got a big refactoring in order to support the TUF
Gaming laptops. Besides that, the regression with backlight being
permanently off on various EeePC laptops has been fixed.
- Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
X axis being inverted. This has been fixed.
- Intel PMC core driver has been extended to be ACPI enumerated if
the DSDT provides device with _HID "INT33A1". This allows to
convert the driver to be pure platform and support new hardware
purely based on ACPI DSDT.
- From now on the Intel Speed Select Technology is supported thru a
corresponding driver. This driver provides an access to the
features of the ISST, such as Performance Profile, Core Power, Base
frequency and Turbo Frequency.
- Mellanox platform drivers has been refactored and now extended to
support more systems, including new coming ones.
- The OLPC XO-1.75 platform is now supported.
- CB4063 Beckhoff Automation board is using PMC clocks, provided via
pmc_atom driver, for ethernet controllers in a way that they can't
be managed by the clock driver. The quirk has been extended to
cover this case.
- Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
the information of Chuwi Hi10 Air has been fixed to cover more
models based on the same platform.
- Xiaomi notebooks have WMI interface enabled. Thus, the driver to
support it has been provided. It required some extension of the
generic WMI library, which allows to propagate opaque context to
the ->probe() of the individual drivers.
This release includes debugfs clean up from Greg KH for several
drivers that drop return code check and make debugfs absence or
failure non-fatal.
Also miscellaneous fixes here and there, mostly for Acer WMI and
various Intel drivers"
* tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
platform/x86: Fix PCENGINES_APU2 Kconfig warning
tools/power/x86/intel-speed-select: Add .gitignore file
platform/x86: mlx-platform: Fix error handling in mlxplat_init()
platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"
platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds
platform/x86: asus-wmi: Use dev_get_drvdata()
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/x86: mlx-platform: Add more reset cause attributes
platform/x86: mlx-platform: Modify DMI matching order
platform/x86: mlx-platform: Add regmap structure for the next generation systems
platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation
platform/x86: mlx-platform: Move regmap initialization before all drivers activation
MAINTAINERS: Update for Intel Speed Select Technology
tools/power/x86: A tool to validate Intel Speed Select commands
platform/x86: ISST: Restore state on resume
platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface
platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs
platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI
platform/x86: ISST: Add Intel Speed Select mmio interface
platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
...
|
||
|
Linus Torvalds
|
cf2d213e49 |
Merge tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update PCI and ACPI power management (improved handling of ACPI
power resources and PCIe link delays, fixes related to corner cases,
hibernation handling rework), fix and extend the operating performance
points (OPP) framework, add new cpufreq drivers for Raspberry Pi and
imx8m chips, update some other cpufreq drivers, clean up assorted
pieces of PM code and documentation and update tools.
Specifics:
- Improve the handling of shared ACPI power resources in the PCI bus
type layer (Mika Westerberg).
- Make the PCI layer take link delays required by the PCIe spec into
account as appropriate and avoid polling devices in D3cold for PME
(Mika Westerberg).
- Fix some corner case issues in ACPI device power management and in
the PCI bus type layer, optimiza and clean up the handling of
runtime-suspended PCI devices during system-wide transitions to
sleep states (Rafael Wysocki).
- Rework hibernation handling in the ACPI core and the PCI bus type
to resume runtime-suspended devices before hibernation (which
allows some functional problems to be avoided) and fix some ACPI
power management issues related to hiberation (Rafael Wysocki).
- Extend the operating performance points (OPP) framework to support
a wider range of devices (Rajendra Nayak, Stehpen Boyd).
- Fix issues related to genpd_virt_devs and issues with platforms
using the set_opp() callback in the OPP framework (Viresh Kumar,
Dmitry Osipenko).
- Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
- Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
- Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and
armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł
Chmiel, YueHaibing).
- Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
- Fix minor issue in the ACPI system sleep support code and export
one function from it (Lenny Szubowicz, Dexuan Cui).
- Clean up assorted pieces of PM code and documentation (Kefeng Wang,
Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
- Update the pm-graph utility to v5.4 (Todd Brandt).
- Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)"
* tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits)
ACPI: PM: Make acpi_sleep_state_supported() non-static
PM: sleep: Drop dev_pm_skip_next_resume_phases()
ACPI: PM: Unexport acpi_device_get_power()
Documentation: ABI: power: Add missing newline at end of file
ACPI: PM: Drop unused function and function header
ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
ACPI: PM: Simplify and fix PM domain hibernation callbacks
PCI: PM: Simplify bus-level hibernation callbacks
PM: ACPI/PCI: Resume all devices during hibernation
cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
cpufreq: Don't skip frequency validation for has_target() drivers
PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
PCI / ACPI: Add _PR0 dependent devices
ACPI / PM: Introduce concept of a _PR0 dependent device
PCI / ACPI: Use cached ACPI device state to get PCI device power state
ACPI: PM: Allow transitions to D0 to occur in special cases
ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
cpufreq: Use has_target() instead of !setpolicy
...
|
||
|
Linus Torvalds
|
2a1ccd3142 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq departement provides the usual mixed bag:
Core:
- Further improvements to the irq timings code which aims to predict
the next interrupt for power state selection to achieve better
latency/power balance
- Add interrupt statistics to the core NMI handlers
- The usual small fixes and cleanups
Drivers:
- Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and
Amazon Gravition AMR/GIC interrupt controllers.
- Rework of the Renesas INTC controller driver
- ACPI support for Socionext SoCs
- Enhancements to the CSKY interrupt controller
- The usual small fixes and cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
irq/irqdomain: Fix comment typo
genirq: Update irq stats from NMI handlers
irqchip/gic-pm: Remove PM_CLK dependency
irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC
softirq: Use __this_cpu_write() in takeover_tasklets()
irqchip/mbigen: Stop printing kernel addresses
irqchip/gic: Add dependency for ARM_GIC_MAX_NR
genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
genirq/timings: Add selftest for next event computation
genirq/timings: Add selftest for irqs circular buffer
genirq/timings: Add selftest for circular array
genirq/timings: Encapsulate storing function
genirq/timings: Encapsulate timings push
genirq/timings: Optimize the period detection speed
genirq/timings: Fix timings buffer inspection
genirq/timings: Fix next event index function
irqchip/qcom: Use struct_size() in devm_kzalloc()
irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler
dt-bindings: interrupt-controller: Update csky mpintc
...
|
||
|
Rafael J. Wysocki
|
99465f12ba |
ACPI: PM: Drop unused function and function header
Remove a leftover function header and a static inline stub with no users from the ACPI header file. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Rafael J. Wysocki
|
c95b7595f8 |
ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
In general, it is not correct to call pm_generic_suspend(),
pm_generic_suspend_late() and pm_generic_suspend_noirq() during the
hibernation's "poweroff" transition, because device drivers may
provide special callbacks to be invoked then and the wrappers in
question cause system suspend callbacks to be run. Unfortunately,
that happens in the ACPI PM domain and ACPI LPSS.
To address this potential issue, introduce "poweroff" callbacks
for the ACPI PM and LPSS that will use pm_generic_poweroff(),
pm_generic_poweroff_late() and pm_generic_poweroff_noirq() as
appropriate.
Fixes:
|
||
|
Rafael J. Wysocki
|
3cd7957e85 |
ACPI: PM: Simplify and fix PM domain hibernation callbacks
First, after a previous change causing all runtime-suspended devices
in the ACPI PM domain (and ACPI LPSS devices) to be resumed before
creating a snapshot image of memory during hibernation, it is not
necessary to worry about the case in which them might be left in
runtime-suspend any more, so get rid of the code related to that from
ACPI PM domain and ACPI LPSS hibernation callbacks.
Second, it is not correct to use pm_generic_resume_early() and
acpi_subsys_resume_noirq() in hibernation "restore" callbacks (which
currently happens in the ACPI PM domain and ACPI LPSS), so introduce
proper _restore_late and _restore_noirq callbacks for the ACPI PM
domain and ACPI LPSS.
Fixes:
|
||
|
Jeremy Linton
|
56855a99f3 |
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI 6.3 adds a flag to indicate that child nodes are all identical cores. This is useful to authoritatively determine if a set of (possibly offline) cores are identical or not. Since the flag doesn't give us a unique id we can generate one and use it to create bitmaps of sibling nodes, or simply in a loop to determine if a subset of cores are identical. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Yurii Pavlovskyi
|
e7488e58c7 |
platform/x86: wmi: Add function to get _UID of WMI device
Add a new function to acpi.h / wmi.c that returns _UID of the ACPI WMI
device. For example, it returns "ATK" for the following declaration in
DSDT:
Device (ATKD)
{
Name (_HID, "PNP0C14" /* Windows Management Instrumentation Device */)
// _HID: Hardware ID
Name (_UID, "ATK") // _UID: Unique ID
..
Generally, it is possible that multiple PNP0C14 ACPI devices are present in
the system as mentioned in the commit message of commit
|
||
|
Thomas Gleixner
|
c942fddf87 |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ard Biesheuvel
|
621dc2fdce |
acpi/irq: Implement helper to create hierachical domains
ACPI permits arbitrary producer->consumer interrupt links to be
described in AML, which means a topology such as the following
is perfectly legal:
Device (EXIU) {
Name (_HID, "SCX0008")
Name (_UID, Zero)
Name (_CRS, ResourceTemplate () {
...
})
}
Device (GPIO) {
Name (_HID, "SCX0007")
Name (_UID, Zero)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE)
Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") {
7,
}
})
...
}
The EXIU in this example is the external interrupt unit as can be found
on Socionext SynQuacer based platforms, which converts a block of 32 SPIs
from arbitrary polarity/trigger into level-high, with a separate set
of config/mask/unmask/clear controls.
The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models
this as a hierarchical domain stacked on top of the GIC's irqdomain.
Since the GIC is modeled as a DT node as well, obtaining a reference
to this irqdomain is easily done by going through the parent link.
On ACPI systems, however, the GIC is not modeled as an object in the
namespace, and so device objects cannot refer to it directly. So in
order to obtain the irqdomain reference when driving the EXIU in ACPI
mode, we need a helper that implicitly grabs the default domain as the
parent of the hierarchy for interrupts allocated out of the global GSI
pool.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|