With certain kernel configurations, CPU offline consumes more than
100ms during S3.
It's a timing related issue: native_cpu_die() would occasionally fall
into a 100ms sleep when the CPU idle loop thread marked the CPU state
to DEAD too slowly.
What native_cpu_die() does is that it polls the CPU state and waits
for 100ms if CPU state hasn't been marked to DEAD. The 100ms sleep
doesn't make sense and is purely historic.
To avoid such long sleeping, this patch adds a 'struct completion'
to each CPU, waits for the completion in native_cpu_die() and wakes
up the completion when the CPU state is marked to DEAD.
Tested on an Intel Xeon server with 48 cores, Ivybridge and on
Haswell laptops. The CPU offlining cost on these machines is
reduced from more than 100ms to less than 5ms. The system
suspend time is reduced by 2.3s on the servers.
Borislav and Prarit also helped to test the patch on an AMD
machine and a few systems of various sizes and configurations
(multi-socket, single-socket, no hyper threading, etc.). No
issues were seen.
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: srostedt@redhat.com
Cc: toshi.kani@hp.com
Cc: imammedo@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1409039025-32310-1-git-send-email-tianyu.lan@intel.com
[ Improved a few minor details in the code, cleaned up the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch restructures the memory controller (IMC) uncore PMU support
for client SNB/IVB/HSW processors. The main change is that it can now
cope with more than one PCI device ID per processor model. There are
many flavors of memory controllers for each processor. They have
different PCI device ID, yet they behave the same w.r.t. the memory
controller PMU that we are interested in.
The patch now supports two distinct memory controllers for IVB
processors: one for mobile, one for desktop.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140917090616.GA11281@quad
Cc: ak@linux.intel.com
Cc: kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The IvyBridge-EP uncore driver was missing three filter flags:
NC, ISOC, C6 which are useful in some cases. Support them in the same way
as the Haswell EP driver, by allowing to set them and exposing
them in the sysfs formats.
Also fix a typo in a define.
Relies on the Haswell EP driver to be applied earlier.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1409872109-31645-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the newly added Broadwell cache event list for Haswell too.
All Haswell and Broadwell events and offcore masks used in these lists
are identical.
However Haswell is very different from the Sandy Bridge
list that was used previously. That fixes a wide range of mis-counting
cache events.
The node events are now only for retired memory events, so prefetching
and speculative memory accesses are not included. They are PEBS
capable now, which makes it much easier to sample for them, plus it's
possible to create address maps with -d.
The prefetch events are gone now. They way the hardware counts
them is very misleading (some prefetches included, others not), so
it seemed best to leave them out.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409683455-29168-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On Broadwell INST_RETIRED.ALL cannot be used with any period
that doesn't have the lowest 6 bits cleared. And the period
should not be smaller than 128.
Add a new callback to enforce this, and set it for Broadwell.
This is erratum BDM57 and BDM11.
How does this handle the case when an app requests a specific
period with some of the bottom bits set
The apps thinks it is sampling at X occurences per sample, when it is
in fact at X - 63 (worst case).
Short answer:
Any useful instruction sampling period needs to be 4-6 orders
of magnitude larger than 128, as an PMI every 128 instructions
would instantly overwhelm the system and be throttled.
So the +-64 error from this is really small compared to the
period, much smaller than normal system jitter.
Long answer:
<write up by Peter:>
IFF we guarantee perf_event_attr::sample_period >= 128.
Suppose we start out with sample_period=192; then we'll set period_left
to 192, we'll end up with left = 128 (we truncate the lower bits). We
get an interrupt, find that period_left = 64 (>0 so we return 0 and
don't get an overflow handler), up that to 128. Then we trigger again,
at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get
an overflow). We increment with sample_period so we get left = 128. We
fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an
overflow). And on and on.
So while the individual interrupts are 'wrong' we get then with
interval=256,128 in exactly the right ratio to average out at 192. And
this works for everything >=128.
So the num_samples*fixed_period thing is still entirely correct +- 127,
which is good enough I'd say, as you already have that error anyhow.
So no need to 'fix' the tools, al we need to do is refuse to create
INST_RETIRED:ALL events with sample_period < 128.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1409683455-29168-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add Broadwell support for Broadwell Client to perf. This is very
similar to Haswell. It uses a new cache event table, because there
were various changes there.
The constraint list has one new event that needs to be handled over
Haswell.
The PEBS event list is the same, so we reuse Haswell's.
[fengguang.wu: make intel_bdw_event_constraints[] static]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Skylake introduces new stolen memory sizes starting at 0xf0 (4MB) and
growing by 4MB increments from there.
v2: Rebase on top of the early-quirk changes from Ville.
v3: Rebase on top of the PCI_IDS/IDS macro rename
Reviewed-by: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I'm getting the spew below when booting with Haswell (Xeon
E5-2699 v3) CPUs and the "Cluster-on-Die" (CoD) feature enabled
in the BIOS. It seems similar to the issue that some folks from
AMD ran in to on their systems and addressed in this commit:
161270fc1f ("x86/smp: Fix topology checks on AMD MCM CPUs")
Both these Intel and AMD systems break an assumption which is
being enforced by topology_sane(): a socket may not contain more
than one NUMA node.
AMD special-cased their system by looking for a cpuid flag. The
Intel mode is dependent on BIOS options and I do not know of a
way which it is enumerated other than the tables being parsed
during the CPU bringup process. In other words, we have to trust
the ACPI tables <shudder>.
This detects the situation where a NUMA node occurs at a place in
the middle of the "CPU" sched domains. It replaces the default
topology with one that relies on the NUMA information from the
firmware (SRAT table) for all levels of sched domains above the
hyperthreads.
This also fixes a sysfs bug. We used to freak out when we saw
the "mc" group cross a node boundary, so we stopped building the
MC group. MC gets exported as the 'core_siblings_list' in
/sys/devices/system/cpu/cpu*/topology/ and this caused CPUs with
the same 'physical_package_id' to not be listed together in
'core_siblings_list'. This violates a statement from
Documentation/ABI/testing/sysfs-devices-system-cpu:
core_siblings: internal kernel map of cpu#'s hardware threads
within the same physical_package_id.
core_siblings_list: human-readable list of the logical CPU
numbers within the same physical_package_id as cpu#.
The sysfs effects here cause an issue with the hwloc tool where
it gets confused and thinks there are more sockets than are
physically present.
Before this patch, there are two packages:
# cd /sys/devices/system/cpu/
# cat cpu*/topology/physical_package_id | sort | uniq -c
18 0
18 1
But 4 _sets_ of core siblings:
# cat cpu*/topology/core_siblings_list | sort | uniq -c
9 0-8
9 18-26
9 27-35
9 9-17
After this set, there are only 2 sets of core siblings, which
is what we expect for a 2-socket system.
# cat cpu*/topology/physical_package_id | sort | uniq -c
18 0
18 1
# cat cpu*/topology/core_siblings_list | sort | uniq -c
18 0-17
18 18-35
Example spew:
...
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2#3#4#5#6#7#8
.... node #1, CPUs: #9
------------[ cut here ]------------
WARNING: CPU: 9 PID: 0 at /home/ak/hle/linux-hle-2.6/arch/x86/kernel/smpboot.c:306 topology_sane.isra.2+0x74/0x90()
sched: CPU #9's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
Modules linked in:
CPU: 9 PID: 0 Comm: swapper/9 Not tainted 3.17.0-rc1-00293-g8e01c4d-dirty #631
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014
0000000000000009 ffff88046ddabe00 ffffffff8172e485 ffff88046ddabe48
ffff88046ddabe38 ffffffff8109691d 000000000000b001 0000000000000009
ffff88086fc12580 000000000000b020 0000000000000009 ffff88046ddabe98
Call Trace:
[<ffffffff8172e485>] dump_stack+0x45/0x56
[<ffffffff8109691d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff8109698c>] warn_slowpath_fmt+0x4c/0x50
[<ffffffff81074f94>] topology_sane.isra.2+0x74/0x90
[<ffffffff8107530e>] set_cpu_sibling_map+0x31e/0x4f0
[<ffffffff8107568d>] start_secondary+0x1ad/0x240
---[ end trace 3fe5f587a9fcde61 ]---
#10#11#12#13#14#15#16#17
.... node #2, CPUs: #18#19#20#21#22#23#24#25#26
.... node #3, CPUs: #27#28#29#30#31#32#33#34#35
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
[ Added LLC domain and s/match_mc/match_die/ ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: brice.goglin@gmail.com
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/20140918193334.C065EBCE@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA.
In that case, KVM will fail to patch VMCALL instructions to VMMCALL
as required on AMD processors.
The failure mode is currently a divide-by-zero exception, which obviously
is a KVM bug that has to be fixed. However, picking the right instruction
between VMCALL and VMMCALL will be faster and will help if you cannot upgrade
the hypervisor.
Reported-by: Chris Webb <chris@arachsys.com>
Tested-by: Chris Webb <chris@arachsys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the arch is found locally in __audit_syscall_entry(), there is no need to
pass it in as a parameter. Delete it from the parameter list.
x86* was the only arch to call __audit_syscall_entry() directly and did so from
assembly code.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-audit@redhat.com
Signed-off-by: Eric Paris <eparis@redhat.com>
---
As this patch relies on changes in the audit tree, I think it
appropriate to send it through my tree rather than the x86 tree.
Pull perf fixes from Ingo Molnar:
"Two kernel side fixes: a kprobes fix and a perf_remove_from_context()
fix (which does not yet fix the migration bug which is WIP)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix a race condition in perf_remove_from_context()
kprobes/x86: Free 'optinsn' cache when range check fails
intel_init_thermal() is called from a) at the time of system initializing
and b) at the time of system resume to initialize thermal
monitoring.
In case when thermal monitoring is handled by SMI, we get to know it via
printk(). Currently it gives the message at both cases, but its okay if
we get it only once and no need to get the same message at every time
system resumes.
So, limit showing this message only at system boot time by avoid showing
at system resume and reduce abusing kernel log buffer.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1411068135.5121.10.camel@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In arch/x86/kernel/setup.c::trim_bios_range(), the codes
introduced by 1b5576e6 (base on d8a9e6a5), it updates the first
4Kb of memory to be E820_RESERVED region. That's because it's a
BIOS owned area but generally not listed in the E820 table:
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
BIOS-e820: [mem 0x0000000000097000-0x0000000000097fff] reserved
...
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
But the region of first 4Kb didn't register to nosave memory:
PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
The code in e820_mark_nosave_regions() assumes the first e820
area to be RAM, so it causes the first 4Kb E820_RESERVED region
ignored when register to nosave. This patch removed assumption
of the first e820 area.
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <len.brown@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1410491038-17576-1-git-send-email-jlee@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86 supports irq work self-IPIs when local apic is available. This is
partly known on runtime so lets implement arch_irq_work_has_interrupt()
accordingly.
This should be safely called after setup_arch().
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The original motivation for these patches was for an Intel CPU
feature called MPX. The patch to add a disabled feature for it
will go in with the other parts of the support.
But, in the meantime, there are a few other features than MPX
that we can make assumptions about at compile-time based on
compile options. Add them to disabled-features.h and check them
with cpu_feature_enabled().
Note that this gets rid of the last things that needed an #ifdef
CONFIG_X86_64 in cpufeature.h. Yay!
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140911211524.C0EC332A@viggo.jf.intel.com
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
cpu_has_pae is only referenced in one place: the X86_32 kexec
code (in a file not even built on 64-bit). It hardly warrants
its own macro, or the trouble we go to ensuring that it can't
be called in X86_64 code.
Axe the macro and replace it with a direct cpu feature check.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140911211511.AD76E774@viggo.jf.intel.com
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The new split Intel uncore driver code that recently went
into tip added a section mismatch, which the build process
complains about.
uncore_pmu_register() can be called from uncore_pci_probe,()
which is not __init and can be called from pci driver ->probe.
I'm not fully sure if it's actually possible to call the probe
function later, but it seems safer to mark uncore_pmu_register
not __init.
This also fixes the warning.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1409332858-29039-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A commit in linux-next was causing boot to fail and bisection
identified the patch 4ba2968420 ("percpu: Resolve ambiguities in
__get_cpu_var/cpumask_var_"). One of the changes in that patch looks
very suspicious. Reverting the full patch fixes boot as does this
fixlet.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
On KVM on my box, this reduces the overhead from an always-accept
seccomp filter from ~130ns to ~17ns. Most of that comes from
avoiding IRET on every syscall when seccomp is enabled.
In extremely approximate hacked-up benchmarking, just bypassing IRET
saves about 80ns, so there's another 43ns of savings here from
simplifying the seccomp path.
The diffstat is also rather nice :)
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/a3dbd267ee990110478d349f78cccfdac5497a84.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
For slowpath syscalls, we initialize regs->ax to -ENOSYS and stick
the syscall number into regs->orig_ax prior to any possible tracing
and syscall execution. This is user-visible ABI used by ptrace
syscall emulation and seccomp.
For fastpath syscalls, there's no good reason not to do the same
thing. It's even slightly simpler than what we're currently doing.
It probably has no measureable performance impact. It should have
no user-visible effect.
The purpose of this patch is to prepare for two-phase syscall
tracing, in which the first phase might modify the saved RAX without
leaving the fast path. This change is just subtle enough that I'm
keeping it separate.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/01218b493f12ae2f98034b78c9ae085e38e94350.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This splits syscall_trace_enter into syscall_trace_enter_phase1 and
syscall_trace_enter_phase2. Only phase 2 has full pt_regs, and only
phase 2 is permitted to modify any of pt_regs except for orig_ax.
The intent is that phase 1 can be called from the syscall fast path.
In this implementation, phase1 can handle any combination of
TIF_NOHZ (RCU context tracking), TIF_SECCOMP, and TIF_SYSCALL_AUDIT,
unless seccomp requests a ptrace event, in which case phase2 is
forced.
In principle, this could yield a big speedup for TIF_NOHZ as well as
for TIF_SECCOMP if syscall exit work were similarly split up.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/2df320a600020fda055fccf2b668145729dd0c04.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The RCU context tracking code requires that arch code call
user_exit() on any entry into kernel code if TIF_NOHZ is set. This
patch adds a check for TIF_NOHZ and a comment to the syscall entry
tracing code.
The main purpose of this patch is to make the code easier to follow:
one can read the body of user_exit and of every function it calls
without finding any explanation of why it's called for traced
syscalls but not for untraced syscalls. This makes it clear when
user_exit() is necessary.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/0b13e0e24ec0307d67ab7a23b58764f6b1270116.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cosmetic, but imho memset(&dst->thread.fpu, 0) is not good simply
because it hides the (important) usage of ->has_fpu/etc from grep.
Change this code to initialize the members explicitly.
And note that ->last_cpu = 0 looks simply wrong, this can confuse
fpu_lazy_restore() if per_cpu(fpu_owner_task, 0) has already exited
and copy_process() re-allocated the same task_struct. Fortunately
this is not actually possible because child->fpu_counter == 0 and
thus fpu_lazy_restore() will not be called, but still this is not
clean/robust.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175727.GA21666@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
arch_dup_task_struct() copies thread.fpu if fpu_allocated(), this
looks suboptimal and misleading. Say, a forking process could use
FPU only once in a signal handler but now tsk_used_math(src) == F,
in this case the child gets a copy of fpu->state for no reason. The
child won't use the saved registers anyway even if it starts to use
FPU, this can only avoid fpu_alloc() in do_device_not_available().
Change this code to check tsk_used_math(current) instead. We still
need to clear fpu->has_fpu/state, we could do this memset(0) under
fpu_allocated() check but I think this doesn't make sense. See also
the next change.
use_eager_fpu() assumes that fpu_allocated() is always true, but a
forking task (and thus its child) must always have PF_USED_MATH set,
otherwise the child can either use FPU without used_math() (note that
switch_fpu_prepare() doesn't do stts() in this case), or it will be
killed by do_device_not_available()->BUG_ON(use_eager_fpu).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175723.GA21659@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Set the IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects so that
interrupts from them can work as wakeup interrupts for suspend-to-idle.
After this change, running enable_irq_wake() on one of the IRQs in
question will succeed and IRQD_WAKEUP_STATE will be set for it, so
all of the suspend-to-idle wakeup mechanics introduced previously
will work for it automatically.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 fixes from Peter Anvin:
"One patch to avoid assigning interrupts we don't actually have on
non-PC platforms, and two patches that addresses bugs in the new
IOAPIC assignment code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, irq, PCI: Keep IRQ assignment for runtime power management
x86: irq: Fix bug in setting IOAPIC pin attributes
x86: Fix non-PC platform kernel crash on boot due to NULL dereference
Currently new system call kexec_file_load() and all the associated code
compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory
code which currently uses gcc option -mcmodel=large. This option seems
to be available only gcc 4.4 onwards.
Hiding new functionality behind a new config option will not break
existing users of old gcc. Those who wish to enable new functionality
will require new gcc. Having said that, I am trying to figure out how
can I move away from using -mcmodel=large but that can take a while.
I think there are other advantages of introducing this new config
option. As this option will be enabled only on x86_64, other arches
don't have to compile generic kexec code which will never be used. This
new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had
to do this for CONFIG_KEXEC. Now with introduction of new config
option, we can remove crypto dependency from other arches.
Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had
CONFIG_X86_64 defined, I got rid of that.
For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to
"depends on CRYPTO=y". This should be safer as "select" is not
recursive.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__get_cpu_var can paper over differences in the definitions of
cpumask_var_t and either use the address of the cpumask variable
directly or perform a fetch of the address of the struct cpumask
allocated elsewhere. This is important particularly when using per cpu
cpumask_var_t declarations because in one case we have an offset into
a per cpu area to handle and in the other case we need to fetch a
pointer from the offset.
This patch introduces a new macro
this_cpu_cpumask_var_ptr()
that is defined where cpumask_var_t is defined and performs the proper
actions. All use cases where __get_cpu_var is used with cpumask_var_t
are converted to the use of this_cpu_cpumask_var_ptr().
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
