ARM: OMAP2+: PRCM and hwmod changes for v4.3
This series adds:
- I/O wakeup support for AM43xx
- register lock and unlock support to the hwmod code (needed for the RTC
IP blocks on some chips)
- several fixes for sparse warnings and an unnecessary null pointer test
- a DRA7xx clockdomain configuration workaround, to deal with some hardware
bugs
Basic build, boot, and PM tests are here:
http://www.pwsan.com/omap/testlogs/hwmod-prcm-for-v4.3/20150723080012/
Since I do not have an AM43xx or DRA7xx device, I can't test on those
platforms.
Use of of_machine_is_compatible() for handling AM335x specific
"DMA kick" quirk in 8250_omap driver makes it ugly to extend the
quirk for other platforms. Instead use a new compatible.
The new compatible will also make it easier to take care of
other quirks on AM335x and like SoCs.
In order to not break backward DTB compatibility for users of
8250_omap driver on AM335x based boards, existing use of
of_machine_is_compatible() has not been removed.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The micrel ks8851 device is present on MSM8960 CDP boards. It is
connected to two regulators, one controlled via a gpio and
another controlled via the RPM. Add the gsbi, spi, gpio
regulator, and micrel ks8851 nodes so that ethernet works
properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Add RPM regulators and configure their constraints on the MSM8960
CDP so that we can control these supplies.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Add the basic RPM and RPM regulator nodes that boards can fill in
with their board specific details.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Now that we have a proper pinctrl driver for the gpio block we
can change the compatible field here and configure the pinmux on
msm8960 devices.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Add PRCM IRQ entry. This is needed for I/O wakeup support.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[paul@pwsan.com: added I/O wakeup note in commit description]
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
This patch replaces use of linux,stdout-path by stdout-path as per
"chosen" DT bindings documentation.
Doing that, the "console" argument is no more needed in kernel command
line.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Merge "omap dts changes for v4.3, part2" from Tony Lindgren:
More omap dts changes for v4.3 merge window:
- Add missing devices for pandora. Note that we're adding wl1251
WLAN and LCD backlight support for now using legacy pdata as that
allows us to drop the legacy board file for pandora in another
series of patches
- Enable power button support for omap5-uevm
- Add aliases for am437x UARTs
- Add support for phyCORE phyBOARD-WEGA-AM335x rdk and
phyCORE-AM335x SoM
- Use u16 values for tsc2046 on omap3-lilly
* tag 'omap-for-v4.3/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap3-pandora: add wifi support
ARM: OMAP2+: omap3-pandora: add backlight support
ARM: dts: omap3-pandora: add support for usb host and 32k buffer
ARM: dts: omap3-pandora: miscellaneous corrections
ARM: dts: omap5-uevm: Add Palmas power button support
ARM: dts: am437x: add aliases for all UART instances
ARM: dts: Add phyBOARD-WEGA-AM335x rdk
ARM: dts: Add support for phyCORE-AM335x SoM
ARM: dts: omap3: correct the format of u16 values for tsc2046 node
Signed-off-by: Olof Johansson <olof@lixom.net>
The gates for the clocks coming out of the sdram pll
were missing. The change adds the missing nodes to
the device tree.
Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
The l3_sp_clk's parent should be the l3_mp_clk. This will account for
the extra divider that is present for the l3_mp_clk.
The dbg_clk's parent should be the dbg_at_clk. This will account for
the extra divider that is present for the dbg_at_clk.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
first of the two bdisp devices, defining register address, interrupt and
clock.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
To enable SMP when booting via u-boot we need to specify the
newly implemented cpu-release-addr DT property for cores 2 & 3.
Cores 0 & 1 are inherited from stih407-family.dtsi.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsout0 channel can be configured for either serial or parallel
data transfer. Both pin configurations are provided.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsin5 can only be configured for serial data transfer. However
depending on board design, two alternate tsin5 pin configurations
are available, both in pin-controller-front0.
pinctrl_tsin5_serial_alt1 is brought out on B2120 reference
design as TSD on NIMB slot of the B2004A daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsin4 can only be configured for serial data transfer. However
depending on board design, two alternate pin configurations
are available. One in pin-controller-front0 and the other in
pin-controller-front1.
pinctrl_tsin4_serial_alt3 is brought out on B2120 reference
design as TSC on NIMA slot of the B2004A daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsin3 channel can only be configured for serial data transfer.
On B2120 reference design tsin3 is brought out as TSB on the NIMB
slot of the B2004A daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsin2 channel can be configured for either serial or parallel data
transfer. This patch adds the pinctrl config for both possibilities.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsin1 channel can be configured for either serial or parallel data
transfer. This patch adds the pinctrl config for both possibilities.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsin0 and be configured as either serial or parallel. This patch
adds the pinctrl config for both possiblities. On B2120 reference
design tsin0 is brought out as TSA on the NIMA slot of the B2004A
daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
tsadc-tshut-mode and tsadc-tshut-polarity properties don't exist. The rockchip
thermal driver looks for rockchip,hw-tshut-mode and rockchip,hw-tshut-polarity
instead, otherwise it might freeze or hang the device according to the default
mode or polarity used.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge "Samsung fixes for v4.2" from Kukjin Kim:
From Krzysztof Kozlowski:
1. Fix exynos3250 MIPI DSI display and MIPI CSIS-2 camera sensorx
after adding support for PMU regmap in exynos-video-mipi driver
(issue introduced in v4.0).
2. Bring back cpufreq for exynos4210 after incomplete switch to
cpufreq-dt driver in 4.2 merge window. The necessary DT changes
for exynos4210 cpufreq was not applied to the same tree as rest
of patchset because of multiple conflicts between clk and arm-soc
trees. Unfortunately without the change the exynos4210 boards
loose cpufreq feature.
* tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: add CPU OPP and regulator supply property for exynos4210
ARM: dts: Update video-phy node with syscon phandle for exynos3250
Signed-off-by: Olof Johansson <olof@lixom.net>
The Terasic DE0 Atlas board is also known as the DE0-Nano board.
This patch adds the DTS board file for the DE0-Nano Sockit board, and not
the DE0 Nano "Development Board".
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v3: Updated skew settings for the gmac1 node as this board is using the
KSZ9031 PHY instead of the 9021 PHY.
v2: use stdpath-out for console and remove comment regarding u-boot ethaddr
Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM,
has most of the A10 pins on a .1" header, 2 USB ports, 1 OTG USB port,
Ethernet, HDMI, SATA, Speaker/Microphone 3.5mm jacks and an SD card slot.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add wl1251 support via pdata-quirks as it's driver lacks DT
support. MMC3 is marked disabled in DT so that MMC3 instance of
hsmmc driver is probed using platform data with special card init
callback.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds missing bits for EHCI HS USB host support and 32k clock
buffer control for the wg7210 bt+wifi module.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- add pandora specific compatible name
- fix mmc2 card detect polarity
- fix mmc1 and mmc2 write protect polarity
- disable write protect pins because of production issue and add an
explanation why they are disabled
- fix NAND partition name to reflect the correct address
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Palmas on OMAP5uevm has support for power button, so enable it.
Signed-off-by: Aparna Balasubramanian <aparnab@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add serialN aliases for all 6 UART instances on
the AM437x SoC so each board's .dts file does not
have to define its own aliases.
Remove the alias added for am437x-gp-evm.dts now
that we have the aliases defined in am4372.dtsi
file.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
phyBOARD-WEGA-AM335x represents a direct soldered
combination of a phyCORE-AM335x SoM and carrier board.
Different kind of SoM options can be connected to
the wega carrier board. So we created a separate
wega dtsi file. The final dts contains the actual
SoM on the carrier board.
WEGA carrier board features:
* ETH phy on carrier board: 1x MII
* 1x CAN
* 2x UART
* USB0 (device)
* USB1 (host)
* mSD slot
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
phyCORE-AM335x is a SoM (System on Module) containing
a AM335x SOC. The module can be connected to different
carrier boards.
Some hardware parts are configurable on the phyCORE-AM335x.
So they are disabled on default in this som dtsi file.
They will be enabled in the board dts files, when populated.
* RAM up to 1GiB
* PMIC
* NAND flash up to 1GiB
* Eth PHY on SOM: 1x RMII
* SPI NOR flash 8MiB (optional)
* i2c RTC (optional)
* i2c EEPROM 4kiB (optional)
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
