Add the base infrastructure and UAPI for netlink extended ACK
reporting. All "manual" calls to netlink_ack() pass NULL for now and
thus don't get extended ACK reporting.
Big thanks goes to Pablo Neira Ayuso for not only bringing up the
whole topic at netconf (again) but also coming up with the nlattr
passing trick and various other ideas.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The schedutil governor reduces frequencies too fast in some
situations which cases undesirable performance drops to
appear.
To address that issue, make schedutil reduce the frequency slower by
setting it to the average of the value chosen during the previous
iteration of governor computations and the new one coming from its
frequency selection formula.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194963
Reported-by: John <john.ettedgui@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
If a console was specified by ACPI SPCR table _and_ command line
parameters like "console=ttyAMA0" _and_ "earlycon" were specified,
then log messages appear twice.
The root cause is that the code traverses the list of specified
consoles (the `console_cmdline` array) and stops at the first match.
But it may happen that the same console is referred by the elements
of this array twice:
pl011,mmio,0x87e024000000,115200 -- from SPCR
ttyAMA0 -- from command line
but in this case `preferred_console` points to the second entry and
the flag CON_CONSDEV is not set, so bootconsole is not deregistered.
To fix that, introduce an invariant "The last non-braille console
is always the preferred one" on the entries of the console_cmdline
array. Then traverse it in reverse order to be sure that if
the console is preferred then it will be the first matching entry.
Introduce variable console_cmdline_cnt that keeps the number
of elements of the console_cmdline array (Petr Mladek). It helps
to get rid of the loop that searches for the end of this array.
Link: http://lkml.kernel.org/r/20170405202006.18234-1-aleksey.makarov@linaro.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Nair, Jayachandran" <Jayachandran.Nair@cavium.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull audit fix from Paul Moore:
"One more small audit fix, this should be the last for v4.11.
Seth Forshee noticed a problem where the audit retry queue wasn't
being flushed properly when audit was enabled and the audit daemon
wasn't running; this patches fixes the problem (see the commit
description for more details on the change).
Both Seth and I have tested this and everything looks good"
* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
audit: make sure we don't let the retry queue grow without bounds
Pull cgroup fixes from Tejun Heo:
"This contains fixes for two long standing subtle bugs:
- kthread_bind() on a new kthread binds it to specific CPUs and
prevents userland from messing with the affinity or cgroup
membership. Unfortunately, for cgroup membership, there's a window
between kthread creation and kthread_bind*() invocation where the
kthread can be moved into a non-root cgroup by userland.
Depending on what controllers are in effect, this can assign the
kthread unexpected attributes. For example, in the reported case,
workqueue workers ended up in a non-root cpuset cgroups and had
their CPU affinities overridden. This broke workqueue invariants
and led to workqueue stalls.
Fixed by closing the window between kthread creation and
kthread_bind() as suggested by Oleg.
- There was a bug in cgroup mount path which could allow two
competing mount attempts to attach the same cgroup_root to two
different superblocks.
This was caused by mishandling return value from kernfs_pin_sb().
Fixed"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: avoid attaching a cgroup root to two different superblocks
cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups
klp_init_transition() does not set func->transition for immediate patches.
Then klp_ftrace_handler() could use the new code immediately. As a result,
it is not safe to put the livepatch module in klp_cancel_transition().
This patch reverts most of the last minute changes klp_cancel_transition().
It keeps the warning about a misuse because it still makes sense.
Fixes: 3ec24776bf ("livepatch: allow removal of a disabled patch")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
BPF helper functions access socket fields through skb->sk. This is not
set in ingress cgroup and socket filters. The association is only made
in skb_set_owner_r once the filter has accepted the packet. Sk is
available as socket lookup has taken place.
Temporarily set skb->sk to sk in these cases.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need to have struct bpf_map_type_list since
it just contains a list_head, the type, and the ops
pointer. Since the types are densely packed and not
actually dynamically registered, it's much easier and
smaller to have an array of type->ops pointer. Also
initialize this array statically to remove code needed
to initialize it.
In order to save duplicating the list, move it to the
types header file added by the previous patch and
include it in the same fashion.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need to have struct bpf_prog_type_list since
it just contains a list_head, the type, and the ops
pointer. Since the types are densely packed and not
actually dynamically registered, it's much easier and
smaller to have an array of type->ops pointer. Also
initialize this array statically to remove code needed
to initialize it.
In order to save duplicating the list, move it to a new
header file and include it in the places needing it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It took me quite some time to figure out how this was linked,
so in order to save the next person the effort of finding it
add a comment in __bpf_prog_run() that indicates what exactly
determines that a program can access the ctx == skb.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not safe for one thread to modify the ->flags
of another thread as there is no locking that can protect
the update.
So tsk_restore_flags(), which takes a task pointer and modifies
the flags, is an invitation to do the wrong thing.
All current users pass "current" as the task, so no developers have
accepted that invitation. It would be best to ensure it remains
that way.
So rename tsk_restore_flags() to current_restore_flags() and don't
pass in a task_struct pointer. Always operate on current->flags.
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Run this:
touch file0
for ((; ;))
{
mount -t cpuset xxx file0
}
And this concurrently:
touch file1
for ((; ;))
{
mount -t cpuset xxx file1
}
We'll trigger a warning like this:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4675 at lib/percpu-refcount.c:317 percpu_ref_kill_and_confirm+0x92/0xb0
percpu_ref_kill_and_confirm called more than once on css_release!
CPU: 1 PID: 4675 Comm: mount Not tainted 4.11.0-rc5+ #5
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
Call Trace:
dump_stack+0x63/0x84
__warn+0xd1/0xf0
warn_slowpath_fmt+0x5f/0x80
percpu_ref_kill_and_confirm+0x92/0xb0
cgroup_kill_sb+0x95/0xb0
deactivate_locked_super+0x43/0x70
deactivate_super+0x46/0x60
...
---[ end trace a79f61c2a2633700 ]---
Here's a race:
Thread A Thread B
cgroup1_mount()
# alloc a new cgroup root
cgroup_setup_root()
cgroup1_mount()
# no sb yet, returns NULL
kernfs_pin_sb()
# but succeeds in getting the refcnt,
# so re-use cgroup root
percpu_ref_tryget_live()
# alloc sb with cgroup root
cgroup_do_mount()
cgroup_kill_sb()
# alloc another sb with same root
cgroup_do_mount()
cgroup_kill_sb()
We end up using the same cgroup root for two different superblocks,
so percpu_ref_kill() will be called twice on the same root when the
two superblocks are destroyed.
We should fix to make sure the superblock pinning is really successful.
Cc: stable@vger.kernel.org # 3.16+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tracing uses rcu_irq_enter() as a way to make sure that RCU is watching when
it needs to use rcu_read_lock() and friends. This is because tracing can
happen as RCU is about to enter user space, or about to go idle, and RCU
does not watch for RCU read side critical sections as it makes the
transition.
There is a small location within the RCU infrastructure that rcu_irq_enter()
itself will not work. If tracing were to occur in that section it will break
if it tries to use rcu_irq_enter().
Originally, this happens with the stack_tracer, because it will call
save_stack_trace when it encounters stack usage that is greater than any
stack usage it had encountered previously. There was a case where that
happened in the RCU section where rcu_irq_enter() did not work, and lockdep
complained loudly about it. To fix it, stack tracing added a call to be
disabled and RCU would disable stack tracing during the critical section
that rcu_irq_enter() was inoperable. This solution worked, but there are
other cases that use rcu_irq_enter() and it would be a good idea to let RCU
give a way to let others know that rcu_irq_enter() will not work. For
example, in trace events.
Another helpful aspect of this change is that it also moves the per cpu
variable called in the RCU critical section into a cache locale along with
other RCU per cpu variables used in that same location.
I'm keeping the stack_trace_disable() code, as that still could be used in
the future by places that really need to disable it. And since it's only a
static inline, it wont take up any kernel text if it is not used.
Link: http://lkml.kernel.org/r/20170405093207.404f8deb@gandalf.local.home
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The tracing subsystem started using rcu_irq_entry() and rcu_irq_exit()
(with my blessing) to allow the current _rcuidle alternative tracepoint
name to be dispensed with while still maintaining good performance.
Unfortunately, this causes RCU's dyntick-idle entry code's tracing to
appear to RCU like an interrupt that occurs where RCU is not designed
to handle interrupts.
This commit fixes this problem by moving the zeroing of ->dynticks_nesting
after the offending trace_rcu_dyntick() statement, which narrows the
window of vulnerability to a pair of adjacent statements that are now
marked with comments to that effect.
Link: http://lkml.kernel.org/r/20170405093207.404f8deb@gandalf.local.home
Link: http://lkml.kernel.org/r/20170405193928.GM1600@linux.vnet.ibm.com
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to eliminate a function call, make "trace_active" into
"disable_stack_tracer" and convert stack_tracer_disable() and friends into
static inline functions.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There are certain parts of the kernel that cannot let stack tracing
proceed (namely in RCU), because the stack tracer uses RCU, and parts of RCU
internals cannot handle having RCU read side locks taken.
Add stack_tracer_disable() and stack_tracer_enable() functions to let RCU
stop stack tracing on the current CPU when it is in those critical sections.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The updates to the trace_active per cpu variable can be updated with the
__this_cpu_*() functions as it only gets updated on the CPU that the variable
is on.
Thanks to Paul McKenney for suggesting __this_cpu_* instead of this_cpu_*.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pointer to ->free_mark callback unnecessarily occupies one long in each
fsnotify_mark although they are the same for all marks from one
notification group. Move the callback pointer to fsnotify_ops.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently we initialize mark->group only in fsnotify_add_mark_lock().
However we will need to access fsnotify_ops of corresponding group from
fsnotify_put_mark() so we need mark->group initialized earlier. Do that
in fsnotify_init_mark() which has a consequence that once
fsnotify_init_mark() is called on a mark, the mark has to be destroyed
by fsnotify_put_mark().
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
These are very thin wrappers, just remove them. Drop
fs/notify/vfsmount_mark.c as it is empty now.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Pass fsnotify_iter_info into ->handle_event() handler so that it can
release and reacquire SRCU lock via fsnotify_prepare_user_wait() and
fsnotify_finish_user_wait() functions. These functions also make sure
current marks are appropriately pinned so that iteration protected by
srcu in fsnotify() stays safe.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of removing mark from object list from fsnotify_detach_mark(),
remove the mark when last reference to the mark is dropped. This will
allow fanotify to wait for userspace response to event without having to
hold onto fsnotify_mark_srcu.
To avoid pinning inodes by elevated refcount (and thus e.g. delaying
file deletion) while someone holds mark reference, we detach connector
from the object also from fsnotify_destroy_marks() and not only after
removing last mark from the list as it was now.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently we free fsnotify_mark_connector structure only when inode /
vfsmount is getting freed. This can however impose noticeable memory
overhead when marks get attached to inodes only temporarily. So free the
connector structure once the last mark is detached from the object.
Since notification infrastructure can be working with the connector
under the protection of fsnotify_mark_srcu, we have to be careful and
free the fsnotify_mark_connector only after SRCU period passes.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Move pointer to inode / vfsmount from mark itself to the
fsnotify_mark_connector structure. This is another step on the path
towards decoupling inode / vfsmount lifetime from notification mark
lifetime.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently notification marks are attached to object (inode or vfsmnt) by
a hlist_head in the object. The list is also protected by a spinlock in
the object. So while there is any mark attached to the list of marks,
the object must be pinned in memory (and thus e.g. last iput() deleting
inode cannot happen). Also for list iteration in fsnotify() to work, we
must hold fsnotify_mark_srcu lock so that mark itself and
mark->obj_list.next cannot get freed. Thus we are required to wait for
response to fanotify events from userspace process with
fsnotify_mark_srcu lock held. That causes issues when userspace process
is buggy and does not reply to some event - basically the whole
notification subsystem gets eventually stuck.
So to be able to drop fsnotify_mark_srcu lock while waiting for
response, we have to pin the mark in memory and make sure it stays in
the object list (as removing the mark waiting for response could lead to
lost notification events for groups later in the list). However we don't
want inode reclaim to block on such mark as that would lead to system
just locking up elsewhere.
This commit is the first in the series that paves way towards solving
these conflicting lifetime needs. Instead of anchoring the list of marks
directly in the object, we anchor it in a dedicated structure
(fsnotify_mark_connector) and just point to that structure from the
object. The following commits will also add spinlock protecting the list
and object pointer to the structure.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently audit code uses checking of mark->inode to verify whether mark
is still alive. Switch that to checking mark flags as that is more
logical and current way will become unreliable in future.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The retry queue is intended to provide a temporary buffer in the case
of transient errors when communicating with auditd, it is not meant
as a long life queue, that functionality is provided by the hold
queue.
This patch fixes a problem identified by Seth where the retry queue
could grow uncontrollably if an auditd instance did not connect to
the kernel to drain the queues. This commit fixes this by doing the
following:
* Make sure we always call auditd_reset() if we decide the connection
with audit is really dead. There were some cases in
kauditd_hold_skb() where we did not reset the connection, this patch
relocates the reset calls to kauditd_thread() so all the error
conditions are caught and the connection reset. As a side effect,
this means we could move auditd_reset() and get rid of the forward
definition at the top of kernel/audit.c.
* We never checked the status of the auditd connection when
processing the main audit queue which meant that the retry queue
could grow unchecked. This patch adds a call to auditd_reset()
after the main queue has been processed if auditd is not connected,
the auditd_reset() call will make sure the retry and hold queues are
correctly managed/flushed so that the retry queue remains reasonable.
Cc: <stable@vger.kernel.org> # 4.10.x-: 5b52330bbf
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The author meant to free the variable that was just allocated, instead
of the one that failed to be allocated, but made a simple typo. This
patch rectifies that.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, inputting the following command will succeed but actually the
value will be truncated:
# echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat
This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull audit cleanup from Paul Moore:
"A week later than I had hoped, but as promised, here is the audit
uninline-fix we talked about during the last audit pull request.
The patch is slightly different than what we originally discussed as
it made more sense to keep the audit_signal_info() function in
auditsc.c rather than move it and bunch of other related
variables/definitions into audit.c/audit.h.
At some point in the future I need to look at how the audit code is
organized across kernel/audit*, I suspect we could do things a bit
better, but it doesn't seem like a -rc release is a good place for
that ;)
Regardless, this patch passes our tests without problem and looks good
for v4.11"
* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
audit: move audit_signal_info() into kernel/auditsc.c
In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED. This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.
Oleg said:
"The kernel can crash or this can lead to other hard-to-debug problems.
In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
contract. Obviusly it is very wrong to manipulate task->state if this
task is already running, or WAKING, or it sleeps again"
[akpm@linux-foundation.org: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.com
Signed-off-by: Ben Segall <bsegall@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I saw some very confusing sysctl output on my system:
# cat /proc/sys/net/core/xfrm_aevent_rseqth
-2
# cat /proc/sys/net/core/xfrm_aevent_etime
-10
# cat /proc/sys/net/ipv4/tcp_notsent_lowat
-4294967295
Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.
Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function tracer needs to be more careful than other subsystems when it
comes to freeing data. Especially if that data is actually executable code.
When a single function is traced, a trampoline can be dynamically allocated
which is called to jump to the function trace callback. When the callback is
no longer needed, the dynamic allocated trampoline needs to be freed. This
is where the issues arise. The dynamically allocated trampoline must not be
used again. As function tracing can trace all subsystems, including
subsystems that are used to serialize aspects of freeing (namely RCU), it
must take extra care when doing the freeing.
Before synchronize_rcu_tasks() was around, there was no way for the function
tracer to know that nothing was using the dynamically allocated trampoline
when CONFIG_PREEMPT was enabled. That's because a task could be indefinitely
preempted while sitting on the trampoline. Now with synchronize_rcu_tasks(),
it will wait till all tasks have either voluntarily scheduled (not on the
trampoline) or goes into userspace (not on the trampoline). Then it is safe
to free the trampoline even with CONFIG_PREEMPT set.
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull tracing fix from Steven Rostedt:
"Wei Yongjun fixed a long standing bug in the ring buffer startup test.
If for some unknown reason, the kthread that is created fails to be
created, the return from kthread_create() is an PTR_ERR and not a
NULL. The test incorrectly checks for NULL instead of an error"
* tag 'trace-v4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Fix return value check in test_ringbuffer()
Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Reject invalid updates to netfilter expectation policies, from Pablo
Neira Ayuso.
2) Fix memory leak in nfnl_cthelper, from Jeffy Chen.
3) Don't do stupid things if we get a neigh_probe() on a neigh entry
whose ops lack a solicit method. From Eric Dumazet.
4) Don't transmit packets in r8152 driver when the carrier is off, from
Hayes Wang.
5) Fix ipv6 packet type detection in aquantia driver, from Pavel
Belous.
6) Don't write uninitialized data into hw registers in bna driver, from
Arnd Bergmann.
7) Fix locking in ping_unhash(), from Eric Dumazet.
8) Make BPF verifier range checks able to understand certain sequences
emitted by LLVM, from Alexei Starovoitov.
9) Fix use after free in ipconfig, from Mark Rutland.
10) Fix refcount leak on force commit in openvswitch, from Jarno
Rajahalme.
11) Fix various overflow checks in AF_PACKET, from Andrey Konovalov.
12) Fix endianness bug in be2net driver, from Suresh Reddy.
13) Don't forget to wake TX queues when processing a timeout, from
Grygorii Strashko.
14) ARP header on-stack storage is wrong in flow dissector, from Simon
Horman.
15) Lost retransmit and reordering SNMP stats in TCP can be
underreported. From Yuchung Cheng.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits)
nfp: fix potential use after free on xdp prog
tcp: fix reordering SNMP under-counting
tcp: fix lost retransmit SNMP under-counting
sctp: get sock from transport in sctp_transport_update_pmtu
net: ethernet: ti: cpsw: fix race condition during open()
l2tp: fix PPP pseudo-wire auto-loading
bnx2x: fix spelling mistake in macros HW_INTERRUT_ASSERT_SET_*
l2tp: take reference on sessions being dumped
tcp: minimize false-positives on TCP/GRO check
sctp: check for dst and pathmtu update in sctp_packet_config
flow dissector: correct size of storage for ARP
net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout
l2tp: take a reference on sessions used in genetlink handlers
l2tp: hold session while sending creation notifications
l2tp: fix duplicate session creation
l2tp: ensure session can't get removed during pppol2tp_session_ioctl()
l2tp: fix race in l2tp_recv_common()
sctp: use right in and out stream cnt
bpf: add various verifier test cases for self-tests
bpf, verifier: fix rejection of unaligned access checks for map_value_adj
...
Audit tree currently uses inode pointer as a key into the hash table.
Getting that from notification mark will be somewhat more difficult with
coming fsnotify changes. So abstract getting of hash key from the audit
chunk and inode so that we can change the method to obtain a key easily.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
CC: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When a kretprobe is installed on a kernel function, there is a maximum
limit of how many calls in parallel it can catch (aka "maxactive"). A
kernel module could call register_kretprobe() and initialize maxactive
(see example in samples/kprobes/kretprobe_example.c).
But that is not exposed to userspace and it is currently not possible to
choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events
The default maxactive can be as low as 1 on single-core with a
non-preemptive kernel. This is too low and we need to increase it not
only for recursive functions, but for functions that sleep or resched.
This patch updates the format of the command that can be written to
kprobe_events so that maxactive can be optionally specified.
I need this for a bpf program attached to the kretprobe of
inet_csk_accept, which can sleep for a long time.
This patch includes a basic selftest:
> # ./ftracetest -v test.d/kprobe/
> === Ftrace unit tests ===
> [1] Kprobe dynamic event - adding and removing [PASS]
> [2] Kprobe dynamic event - busy event check [PASS]
> [3] Kprobe dynamic event with arguments [PASS]
> [4] Kprobes event arguments with types [PASS]
> [5] Kprobe dynamic event with function tracer [PASS]
> [6] Kretprobe dynamic event with arguments [PASS]
> [7] Kretprobe dynamic event with maxactive [PASS]
>
> # of passed: 7
> # of failed: 0
> # of unresolved: 0
> # of untested: 0
> # of unsupported: 0
> # of xfailed: 0
> # of undefined(test bug): 0
BugLink: https://github.com/iovisor/bcc/issues/1072
Link: http://lkml.kernel.org/r/1491215782-15490-1-git-send-email-alban@kinvolk.io
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some console drivers code calls console_conditional_schedule()
that looks at @console_may_schedule. The value must be cleared
when the drivers are called from console_unlock() with
interrupts disabled. But rescheduling is fine when the same
code is called, for example, from tty operations where the
console semaphore is taken via console_lock().
This is why @console_may_schedule is cleared before calling console
drivers. The original value is stored to decide if we could sleep
between lines.
Now, @console_may_schedule is not cleared when we call
console_trylock() and jump back to the "again" goto label.
This has become a problem, since the commit 6b97a20d3a
("printk: set may_schedule for some of console_trylock() callers").
@console_may_schedule might get enabled now.
There is also the opposite problem. console_lock() can be called
only from preemptive context. It can always enable scheduling in
the console code. But console_trylock() is not able to detect it
when CONFIG_PREEMPT_COUNT is disabled. Therefore we should use the
original @console_may_schedule value after re-acquiring
the console semaphore in console_unlock().
This patch solves both problems by moving the "again" goto label.
Alternative solution was to clear and restore the value around
call_console_drivers(). Then console_conditional_schedule() could
be used also inside console_unlock(). But there was a potential race
with console_flush_on_panic() as reported by Sergey Senozhatsky.
That function should be called only where there is only one CPU
and with interrupts disabled. But better be on the safe side
because stopping CPUs might fail.
Fixes: 6b97a20d3a ("printk: set may_schedule for some of console_trylock() callers")
Link: http://lkml.kernel.org/r/1490372045-22288-1-git-send-email-pmladek@suse.com
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The irq_create_affinity_masks routine is responsible for assigning a
number of interrupt vectors to CPUs. The optimal assignemnet will spread
requested vectors to all CPUs, with the fewest CPUs sharing a vector.
The algorithm may fail to assign some vectors to any CPUs if a node's
CPU count is lower than the average number of vectors per node. These
vectors are unusable and create an un-optimal spread.
Recalculate the number of vectors to assign at each node iteration by using
the remaining number of vectors and nodes to be assigned, not exceeding the
number of CPUs in that node. This will guarantee that every CPU is assigned
at least one vector.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: linux-nvme@lists.infradead.org
Link: http://lkml.kernel.org/r/1491247553-7603-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
