This patch adds support for up to 6 hardware counters for AMD family
15h cpus. There is a new MSR range for hardware counters beginning at
MSRC001_0200 Performance Event Select (PERF_CTL0).
Signed-off-by: Robert Richter <robert.richter@amd.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86: avoid high BIOS area when allocating address space
x86: avoid E820 regions when allocating address space
x86: avoid low BIOS area when allocating address space
resources: add arch hook for preventing allocation in reserved areas
Revert "resources: support allocating space within a region from the top down"
Revert "PCI: allocate bus resources from the top down"
Revert "x86/PCI: allocate space from the end of a region, not the beginning"
Revert "x86: allocate space within a region top-down"
Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"
PCI: Update MCP55 quirk to not affect non HyperTransport variants
Use cmpxchg instead of xchg to realize this_cpu_xchg.
xchg will cause LOCK overhead since LOCK is always implied but cmpxchg
will not.
Baselines:
xchg() = 18 cycles (no segment prefix, LOCK semantics)
__this_cpu_xchg = 1 cycle
(simulated using this_cpu_read/write, two prefixes. Looks like the
cpu can use loop optimization to get rid of most of the overhead)
Cycles before:
this_cpu_xchg = 37 cycles (segment prefix and LOCK (implied by xchg))
After:
this_cpu_xchg = 11 cycle (using cmpxchg without lock semantics)
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Provide support as far as the hardware capabilities of the x86 cpus
allow.
Define CONFIG_CMPXCHG_LOCAL in Kconfig.cpu to allow core code to test for
fast cpuops implementations.
V1->V2:
- Take out the definition for this_cpu_cmpxchg_8 and move it into
a separate patch.
tj: - Reordered ops to better follow this_cpu_* organization.
- Renamed macro temp variables similar to their existing
neighbours.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This prevents allocation of the last 2MB before 4GB.
The experiment described here shows Windows 7 ignoring the last 1MB:
https://bugzilla.kernel.org/show_bug.cgi?id=23542#c27
This patch ignores the top 2MB instead of just 1MB because H. Peter Anvin
says "There will be ROM at the top of the 32-bit address space; it's a fact
of the architecture, and on at least older systems it was common to have a
shadow 1 MiB below."
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
- include/linux/percpu.h: this_cpu_add_return() and friends were
located next to __this_cpu_add_return(). However, the overall
organization is to first group by preemption safeness. Relocate
this_cpu_add_return() and friends to preemption-safe area.
- arch/x86/include/asm/percpu.h: Relocate percpu_add_return_op() after
other more basic operations. Relocate [__]this_cpu_add_return_8()
so that they're first grouped by preemption safeness.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Supply an implementation for x86 in order to generate more efficient code.
V2->V3:
- Cleanup
- Remove strange type checking from percpu_add_return_op.
tj: - Dropped unused typedef from percpu_add_return_op().
- Renamed ret__ to paro_ret__ in percpu_add_return_op().
- Minor indentation adjustments.
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to
call into OLPC's Open Firmware to build the tree.
v5: fix buglet with root node check (introduced in v4)
v4: address some minor style issues pointed out by Grant, and explicitly cast
negative phandle checks to s32.
v3: rename olpc_prom to olpc_dt
- rework Kconfig entries
- drop devtree build hook from proc, instead adding a call to x86's
paging_init (similarly to how sparc64 does it)
- switch allocation from using slab to alloc_bootmem. this allows
the DT to be built earlier during boot (during setup_arch); the
downside is that there are some 1200 bootmem reservations that are
done during boot. Not ideal..
- add a helper olpc_ofw_is_installed function to test for the
existence and successful detection of OLPC's OFW.
Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101116220952.26526a80@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
- Define a stub irq_create_of_mapping for x86 as a stop-gap solution until
drivers/of/irq is further along.
- Define irq_dispose_mapping for x86 to appease of_i2c.c
These are needed to allow stuff in drivers/of/ to build on x86. This stuff
will eventually get replaced; quoting Grant,
"The long term plan is to have the drivers/of/ code handling the mapping
intelligently like powerpc currently does." But for now, just provide
these functions.
Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101111214526.5de7121b@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
During suspend, we disable all the non boot cpus. And during resume we bring
them all back again. So no need to do alternatives_smp_switch() in between.
On my core 2 based laptop, this speeds up the suspend path by 15msec and the
resume path by 5 msec (suspend/resume speed up differences can be attributed
to the different P-states that the cpu is in during suspend/resume).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1290557500.4946.8.camel@sbsiddha-MOBL3.sc.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.
Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reason: apic cleanup series depends on x86/apic, x86/amd-nb x86/platform
Conflicts:
arch/x86/include/asm/io_apic.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently the number of CPUID leaves KVM handles is limited to 40.
My desktop machine (AthlonII) already has 35 and future CPUs will
expand this well beyond the limit. Extend the limit to 80 to make
room for future processors.
KVM-Stable-Tag.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sodaville needs to setup the IO_APIC ids as the boot loader leaves
them uninitialized. Split out the setter function so it can be called
unconditionally from the sodaville board code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101126165020.GA26361@www.tglx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the guest domain has been suspend/resumed or migrated, then the
system clock backing the pvclock clocksource may revert to a smaller
value (ie, can be non-monotonic across the migration/save-restore).
Make sure we zero last_value in that case so that the domain
continues to see clock updates.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled
x86-64: Fix and clean up AMD Fam10 MMCONF enabling
x86: UV: Address interrupt/IO port operation conflict
x86: Use online node real index in calulate_tbl_offset()
x86, asm: Fix binutils 2.15 build failure
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf symbols: Remove incorrect open-coded container_of()
perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
x86/kprobes: Prevent kprobes to probe on save_args()
irq_work: Drop cmpxchg() result
perf: Fix owner-list vs exit
x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
tracing: Fix recursive user stack trace
perf,hw_breakpoint: Initialize hardware api earlier
x86: Ignore trap bits on single step exceptions
tracing: Force arch_local_irq_* notrace for paravirt
tracing: Fix module use of trace_bprintk()
Add description of .config in a sake of RAW events.
At least this should bring some light to those who
will be reading this code.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).
The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.
Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.
Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When compiling arch/x86/kernel/early_printk_mrst.c with i386
allmodconfig, gcc-4.1.0 generates an out-of-line copy of
__set_fixmap_offset() which contains a reference to
__this_fixmap_does_not_exist which the compiler cannot elide.
Marking __set_fixmap_offset() as __always_inline prevents this.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Feng Tang <feng.tang@intel.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* upstream/core:
xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
xen: set IO permission early (before early_cpu_init())
xen: re-enable boot-time ballooning
xen/balloon: make sure we only include remaining extra ram
xen/balloon: the balloon_lock is useless
xen: add extra pages to balloon
xen/events: use locked set|clear_bit() for cpu_evtchn_mask
xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
xen: implement XENMEM_machphys_mapping
* upstream/xenfs:
Revert "xen/privcmd: create address space to allow writable mmaps"
xen/xenfs: update xenfs_mount for new prototype
xen: fix header export to userspace
xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
xen: xenfs: privcmd: check put_user() return code
* upstream/evtchn:
xen: make evtchn's name less generic
xen/evtchn: the evtchn device is non-seekable
xen/evtchn: add missing static
xen/evtchn: Fix name of Xen event-channel device
xen/evtchn: don't do unbind_from_irqhandler under spinlock
xen/evtchn: remove spurious barrier
xen/evtchn: ports start enabled
xen/evtchn: dynamically allocate port_user array
xen/evtchn: track enabled state for each port
Adaptions to the changes of the AMD northbridge caching code: instead
of a bool in each l3 struct, use a flag in amd_northbridges.flags to
indicate L3 cache index disable support; use a pointer to the whole
northbridge instead of the misc device in the l3 struct; simplify the
initialisation; dynamically generate sysfs attribute array.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Support more than just the "Misc Control" part of the northbridges.
Support more flags by turning "gart_supported" into a single bit flag
that is stored in a flags member. Clean up related code by using a set
of functions (amd_nb_num(), amd_nb_has_feature() and node_to_amd_nb())
instead of accessing the NB data structures directly. Reorder the
initialization code and put the GART flush words caching in a separate
function.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Not only the naming of the files was confusing, it was even more so for
the function and variable names.
Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The various stack tracing routines take a 'bp' argument in which the
caller is supposed to provide the base pointer to use, or 0 if doesn't
have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not
defined, this means all callers in principle should either always pass
0, or be conditional on CONFIG_FRAME_POINTER.
However, there are only really three use cases for stack tracing:
(a) Trace the current task, including IRQ stack if any
(b) Trace the current task, but skip IRQ stack
(c) Trace some other task
In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just
be 0. If it _is_ defined, then
- in case (a) bp should be gotten directly from the CPU's register, so
the caller should pass NULL for regs,
- in case (b) the caller should should pass the IRQ registers to
dump_trace(),
- in case (c) bp should be gotten from the top of the task's stack, so
the caller should pass NULL for regs.
Hence, the bp argument is not necessary because the combination of
task and regs is sufficient to determine an appropriate value for bp.
This patch introduces a new inline function stack_frame(task, regs)
that computes the desired bp. This function is then called from the
two versions of dump_stack().
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>,
LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Candidate memory ranges were not calculated properly (start
addresses got needlessly rounded down, and end addresses didn't
get rounded up at all), address comparison for secondary CPUs
was done on only part of the address, and disabled status wasn't
tracked properly.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <4CE24DF40200007800022737@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch expands functionality of CONFIG_DEBUG_RODATA to set main
(static) kernel data area as NX.
The following steps are taken to achieve this:
1. Linker script is adjusted so .text always starts and ends on a page bound
2. Linker script is adjusted so .rodata always start and end on a page boundary
3. NX is set for all pages from _etext through _end in mark_rodata_ro.
4. free_init_pages() sets released memory NX in arch/x86/mm/init.c
5. bios rom is set to x when pcibios is used.
The results of patch application may be observed in the diff of kernel page
table dumps:
pcibios:
-- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
0x00000000-0xc0000000 3G pmd
---[ Kernel Mapping ]---
-0xc0000000-0xc0100000 1M RW GLB x pte
+0xc0000000-0xc00a0000 640K RW GLB NX pte
+0xc00a0000-0xc0100000 384K RW GLB x pte
-0xc0100000-0xc03d7000 2908K ro GLB x pte
+0xc0100000-0xc0318000 2144K ro GLB x pte
+0xc0318000-0xc03d7000 764K ro GLB NX pte
-0xc03d7000-0xc0600000 2212K RW GLB x pte
+0xc03d7000-0xc0600000 2212K RW GLB NX pte
0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
0xf7bfe000-0xf7c00000 8K pte
No pcibios:
-- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
0x00000000-0xc0000000 3G pmd
---[ Kernel Mapping ]---
-0xc0000000-0xc0100000 1M RW GLB x pte
+0xc0000000-0xc0100000 1M RW GLB NX pte
-0xc0100000-0xc03d7000 2908K ro GLB x pte
+0xc0100000-0xc0318000 2144K ro GLB x pte
+0xc0318000-0xc03d7000 764K ro GLB NX pte
-0xc03d7000-0xc0600000 2212K RW GLB x pte
+0xc03d7000-0xc0600000 2212K RW GLB NX pte
0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
0xf7bfe000-0xf7c00000 8K pte
The patch has been originally developed for Linux 2.6.34-rc2 x86 by
Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>.
-v1: initial patch for 2.6.30
-v2: patch for 2.6.31-rc7
-v3: moved all code into arch/x86, adjusted credits
-v4: fixed ifdef, removed credits from CREDITS
-v5: fixed an address calculation bug in mark_nxdata_nx()
-v6: added acked-by and PT dump diff to commit log
-v7: minor adjustments for -tip
-v8: rework with the merge of "Set first MB as RW+NX"
Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F82E.60601@free.fr>
[ minor cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch for SGI UV systems addresses a problem whereby
interrupt transactions being looped back from a local IOH,
through the hub to a local CPU can (erroneously) conflict with
IO port operations and other transactions.
To workaound this we set a high bit in the APIC IDs used for
interrupts. This bit appears to be ignored by the sockets, but
it avoids the conflict in the hub.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20101116222352.GA8155@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
___
arch/x86/include/asm/uv/uv_hub.h | 4 ++++
arch/x86/include/asm/uv/uv_mmrs.h | 19 ++++++++++++++++++-
arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++--
arch/x86/platform/uv/tlb_uv.c | 2 +-
arch/x86/platform/uv/uv_time.c | 4 +++-
5 files changed, 49 insertions(+), 5 deletions(-)
Now that the bulk of the old nmi_watchdog is gone, remove all
the stub variables and hooks associated with it.
This touches lots of files mainly because of how the io_apic
nmi_watchdog was implemented. Now that the io_apic nmi_watchdog
is forever gone, remove all its fingers.
Most of this code was not being exercised by virtue of
nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to
risky here.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that we have a new nmi_watchdog that is more generic and
sits on top of the perf subsystem, we really do not need the old
nmi_watchdog any more.
In addition, the old nmi_watchdog doesn't really work if you are
using the default clocksource, hpet. The old nmi_watchdog code
relied on local apic interrupts to determine if the cpu is still
alive. With hpet as the clocksource, these interrupts don't
increment any more and the old nmi_watchdog triggers false
postives.
This piece removes the old nmi_watchdog code and stubs out any
variables and functions calls. The stubs are the same ones used
by the new nmi_watchdog code, so it should be well tested.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This hypercall allows Xen to specify a non-default location for the
machine to physical mapping. This capability is used when running a 32
bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to
exactly the size required.
[ Impact: add Xen hypercall definitions ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Moorestown platform doesn't have a m146818 RTC device like traditional
x86 PC, but a firmware emulated virtual RTC device(vrtc), which provides
some basic RTC functions like get/set time. vrtc serves as the only
wall clock device on Moorestown platform.
[ tglx: Changed the exports to _GPL ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110172837.3311.40483.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When running ktest.pl randconfig tests, I would sometimes trigger
a lockdep annotation bug (possible reason: unannotated irqs-on).
This triggering happened right after function tracer self test was
executed. After doing a config bisect I found that this was caused with
having function tracer, paravirt guest, prove locking, and rcu torture
all enabled.
The rcu torture just enhanced the likelyhood of triggering the bug.
Prove locking was needed, since it was the thing that was bugging.
Function tracer would trace and disable interrupts in all sorts
of funny places.
paravirt guest would turn arch_local_irq_* into functions that would
be traced.
Besides the fact that tracing arch_local_irq_* is just a bad idea,
this is what is happening.
The bug happened simply in the local_irq_restore() code:
if (raw_irqs_disabled_flags(flags)) { \
raw_local_irq_restore(flags); \
trace_hardirqs_off(); \
} else { \
trace_hardirqs_on(); \
raw_local_irq_restore(flags); \
} \
The raw_local_irq_restore() was defined as arch_local_irq_restore().
Now imagine, we are about to enable interrupts. We go into the else
case and call trace_hardirqs_on() which tells lockdep that we are enabling
interrupts, so it sets the current->hardirqs_enabled = 1.
Then we call raw_local_irq_restore() which calls arch_local_irq_restore()
which gets traced!
Now in the function tracer we disable interrupts with local_irq_save().
This is fine, but flags is stored that we have interrupts disabled.
When the function tracer calls local_irq_restore() it does it, but this
time with flags set as disabled, so we go into the if () path.
This keeps interrupts disabled and calls trace_hardirqs_off() which
sets current->hardirqs_enabled = 0.
When the tracer is finished and proceeds with the original code,
we enable interrupts but leave current->hardirqs_enabled as 0. Which
now breaks lockdeps internal processing.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
get_ucode_data is a memcpy() wrapper which always returns 0. Move it
into the header and make it an inline. Remove all code checking its
return value and turn it into a void.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
A new version of the SGI UV hub node controller is being
developed. A few of the MMRs (control registers) that exist on
the current hub no longer exist on the new hub. Fortunately,
there are alternate MMRs that are are functionally equivalent
and that exist on both hubs.
This patch changes the UV code to use MMRs that exist in BOTH
versions of the hub node controller.
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20101106204056.GA27584@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
native_apic_msr_read() and x2apic_enabled() use rdmsr(msr, low, high),
but only use the low part.
gcc4.6 complains about this:
.../apic.h:144:11: warning: variable 'high' set but not used [-Wunused-but-set-variable]
rdmsr() is just a wrapper around rdmsrl() which splits the 64bit value
into low and high, so using rdmsrl() directly solves this.
[tglx: Changed the variables to u64 as suggested by Cyrill. It's less
confusing and has no code impact as this is 64bit only anyway.
Massaged changelog as well. ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: x86@kernel.org
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1289251229-19589-1-git-send-email-andi@firstfloor.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
SFI provides a series of tables. These describe the platform devices present
including SPI and I²C devices, as well as various sensors, keypads and other
glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c)
This patch is a merge of the core elements and relevant fixes from the
Intel development code by Feng, Alek, myself into a single coherent patch
for upstream submission.
It provides the needed infrastructure to register I2C, SPI and platform devices
described by the tables, as well as handlers for some of the hardware already
supported in kernel. The 0.8 firmware also provides GPIO tables.
Devices are created at boot time or if they are SCU dependant at the point an
SCU is discovered. The existing Linux device mechanisms will then handle the
device binding. At an abstract level this is an SFI to Linux device translator.
Device/platform specific setup/glue is in this file. This is done so that the
drivers for the generic I²C and SPI bus devices remain cross platform as they
should.
(Updated from RFC version to correct the emc1403 name used by the firmware
and a wrongly used #define)
Signed-off-by: Alek Du <alek.du@linux.intel.com>
LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain>
[Clean ups, removal of 0.7 support]
Signed-off-by: Feng Tang <feng.tang@linux.intel.com>
[Clean ups]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, alternative: Call stop_machine_text_poke() on all cpus
x86-32: Restore irq stacks NUMA-aware allocations
x86, memblock: Fix early_node_mem with big reserved region.
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, uv: More Westmere support on SGI UV
x86, uv: Enable Westmere support on SGI UV
and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
xen: register xen pci notifier
xen: initialize cpu masks for pv guests in xen_smp_init
xen: add a missing #include to arch/x86/pci/xen.c
xen: mask the MTRR feature from the cpuid
xen: make hvc_xen console work for dom0.
xen: add the direct mapping area for ISA bus access
xen: Initialize xenbus for dom0.
xen: use vcpu_ops to setup cpu masks
xen: map a dummy page for local apic and ioapic in xen_set_fixmap
xen: remap MSIs into pirqs when running as initial domain
xen: remap GSIs as pirqs when running as initial domain
xen: introduce XEN_DOM0 as a silent option
xen: map MSIs into pirqs
xen: support GSI -> pirq remapping in PV on HVM guests
xen: add xen hvm acpi_register_gsi variant
acpi: use indirect call to register gsi in different modes
xen: implement xen_hvm_register_pirq
xen: get the maximum number of pirqs from xen
xen: support pirq != irq
* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
X86/PCI: Remove the dependency on isapnp_disable.
xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
x86: xen: Sanitse irq handling (part two)
swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
xen/pci: Request ACS when Xen-SWIOTLB is activated.
xen-pcifront: Xen PCI frontend driver.
xenbus: prevent warnings on unhandled enumeration values
xenbus: Xen paravirtualised PCI hotplug support.
xen/x86/PCI: Add support for the Xen PCI subsystem
x86: Introduce x86_msi_ops
msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
x86/PCI: Export pci_walk_bus function.
x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
x86/PCI: Clean up pci_cache_line_size
xen: fix shared irq device passthrough
xen: Provide a variant of xen_poll_irq with timeout.
xen: Find an unbound irq number in reverse order (high to low).
xen: statically initialize cpu_evtchn_mask_p
...
Fix up trivial conflicts in drivers/pci/Makefile
